【单选题】
What is the default load balancing policy for a newly created VMkernel port on a vSphere Distributed Switch? ___
A. Route based on orginating virtual port ID
B. Route based on IP Hash
C. Route based on source mac address
D. Route based on physical NIC load
查看试卷，进入试卷练习
微信扫一扫，开始刷题
相关试题
【单选题】
An administrator deploys vCenter Server using the embedded Platform Services Controller. After testing the deployment for a couple of months, it is determined that the environment would be better served with an external Platform Services Controller. What should the administrator do to meet this new requirement? ___
A. Deploy a fresh instance of vCenter Server with an external Platform Services Controller.
B. Perform a fresh install of an external Platform Services Controller.
C. Migrate the embedded Platform Services Controller to an external Platform Services Controller.
D. Upgrade the embedded Platform Services Controller to an external Platform Services Controller.
【单选题】
Why are some virtual machines orphaned after rebooting a High Availability (HA) enabled host? ___
A. The Orphaned virtual machines have HA restart disabled.
B. The Orphaned virtual machines moved recently and the change did not persist.
C. The host is attached to failed storage.
D. The host just came out of maintenance mode.
【单选题】
Which vSphere 6 Standard Edition feature will allow an organization to ensure that critical multi-threaded applications have the maximum possible uptime? ___
A. Fault Tolerance
B. High Availability
C. Distributed Resource Scheduler
D. App HA
【多选题】
An application running in a virtual machine is experiencing performance issues. When utilizing performance monitoring utilities, it is noted that the CPU Utilization of the application is at 100%. Which two scenarios are probable causes of the CPU contention for the application? (Choose two.)___
A. There is a network I/O constraint.
B. There is a storage I/O constraint.
C. There is insufficient disk space assigned to the virtual machine.
D. The application is not virtualization aware.
【多选题】
A Fault Tolerance (FT) virtual machine with four vCPUs is experiencing high latency when performing ICMP and Application tests. What are three potential causes that may be attributing to this latency? (Choose three.)___
A. The FT network has insufficient bandwidth and is running on a 1GB Link.
B. The FT network is on a particularly high latency link.
C. The FT network has been configured with Network I/O Control.
D. The FT virtual machine is running an e1000 network adapter.
E. The
F. T virtual machine is running on poor performing network-based storage.
【多选题】
A virtual machine is experiencing performance issues. The following performance metrics are observed: <CPU usage value for the virtual machine is above 90%> < CPU ready value for the virtual machine is above 20%> Which two activities will likely resolve the performance issues? (Choose two.)___
A. Set a CPU reservation for the virtual machine.
B. Increase the CPU limit on the virtual machine.
C. Decrease CPU shares equally for all virtual machines on the host.
D. Increase CPU shares equally for all virtual machines on the host.
【多选题】
An administrator is upgrading a vSphere Distributed Switch. The existing switch is version 6.0 and the administrator wants to upgrade to the latest version possible. The environment contains several ESXi 6.1 hosts. Which two options are available to ensure that the upgraded switch will be compatible with these hosts? (Choose two.)___
A. Upgrade the vSphere Distributed Switch to 6.0
B. Upgrade the ESXi 5.5 hosts to version 6.0, then upgrade the vSphere Distributed Switch to 5.5
C. Upgrade the vSphere Distributed Switch to 5.1
D. Upgrade the
E. SXi host switches to 5.5, then upgrade the vSphere Distributed Switch to 5.5
【多选题】
An administrator attempts to create a Thick Provisioned Virtual Disk (VMDK) on an NFS datastore; but it fails. Which two reasons would explain the failure? (Choose two.)___
A. Datastore is on an NFS 3 storage server that does not support Hardware Acceleration
B. Datastore is on an NFS 4.1 storage server
C. Only VMFS datastores support "Thick Provisioned" VMDK
D. The NFS datastore was not created on a "Thick Provisioned" device
【多选题】
Which two NFS Protocol versions does vSphere 6 support? (Choose two.)___
A. Version 3
B. Version 3.1
C. Version 4
D. Version 4.1
【多选题】
Which three operations occur during a cold migration of a virtual machine? (Choose three.)___
A. The virtual machine disks are moved if the datastore is being changed.
B. The virtual machine is registered with the destination server.
C. The source virtual machine is removed from the old hosts.
D. The virtual machine hardware is upgraded.
E. The virtual machine files are quiesced prior to the migration.
【多选题】
A 4 GB Memory virtual machine is experiencing extended memory issues, as shown in the Exhibit. What potential issues could be attributed to this memory pressure?___
A. A limit is imposed on the virtual memory of this virtual machine.
B. The Balloon driver has been uninstalled.
C. A limit has been imposed on the Virtual CPU of the virtual machine.
D. Storage IO control has been enabled for the virtual machine causing the swapped memory.
【多选题】
You are creating a virtual machine in the Web Client using the New Virtual Machine wizard. Which two steps are required? (Choose two.)___
A. Select a valid name.
B. Select a cluster for the compute resource.
C. Select a network adapter.
D. Select the virtual machine compatibility.
【多选题】
An administrator has been given requirements to configure vMotion for a new virtual machine. The configuration should: <Provide Network Redundancy Use VLAN 550> <Be secured against anyone trying to spoof communication The vSwitch1 configuration is shown in the Exhibit.> Which three changes should be made to meet the stated requirements? (Choose three.)___
A. The VLAN ID must be set appropriately.
B. The default values for MAC Address Changes and Forged Transmits must be altered.
C. The teaming and failover adapters must be set appropriately.
D. The Traffic Shaping configuration must be altered.
E. The Load Balancing Policy must be set appropriately.
【多选题】
Which three traffic types are available services options when configuring a vmkernel port? (Choose three.)___
A. Provisioning Traffic
B. Virtual Volumes Traffic
C. vSphere Replication NFC Traffic
D. Virtual SAN Traffic
E. FCoE Traffic
【多选题】
An administrator logs into the vSphere Web Client, but is unable to see any hosts and clusters. Which two options could fix the problem? (Choose two.)___
A. Verify that the client web browser and vCenter Server are in the same broadcast domain.
B. Verify that the vCenter Server system is registered with the same Platform Services Controller as the vSphere Web Client.
C. Log in to the vCenter Server as a user within the Active
D. irectory domain.
【多选题】
Which three VLAN Tagging modes are available in vSphere 6.x? (Choose three.)___
A. External Switch Tagging
B. Private VLAN Tagging
C. Virtual Switch Tagging
D. VXLAN Tagging
E. Virtual Guest Tagging
【多选题】
Which two statements are true about VMFS5 datastores on ESXi 6.x? (Choose two.)___
A. Virtual Disk (VMDK) size can be larger than 2TB.
B. Datastore extent size can be larger than 2TB.
C. Only Physical Mode Raw
D. evice Map (Passthrough-RDM) can be larger than 2TB.
【多选题】
Which two statements are correct when turning off a Distributed Resource Scheduler (DRS) Cluster? (Choose two.)___
A. The resource pool hierarchy of the DRS cluster is maintained.
B. The resource pool hierarchy of the DRS cluster is removed.
C. The affinity settings of the
D. RS cluster are removed and not maintained when DRS is re-enabled.
【多选题】
An administrator is creating a new Virtual SAN cluster on a Layer 2 network. There is an existing Virtual SAN cluster on the same Layer 2 network. Which two actions would allow the new Virtual SAN cluster to coexist with the older cluster? (Choose two.)___
A. Change the default Multicast Address on the new Virtual SAN cluster.
B. Change the default Unicast Address on the new Virtual SAN Cluster.
C. Create a separate VLAN for each cluster.
D. Create an ARP Alias for the Virtual SAN VMkernel Network Adapter.
【多选题】
A vCenter Operations Manager 5.7 environment is upgraded to vRealize Operations. After the upgrade, the analytics services fail to start. Which three steps must be taken to resolve the problem? (Choose three.)___
A. Take the vRealize Operations cluster offline.
B. Delete the activity persistence files.
C. Bring the cluster back online.
D. Remove any unresponsive nodes.
E. Stop the CaSA service.
【多选题】
An organization has an ESXi 6.x host that contains two resource pools. The host is being relocated to a DRS cluster. What two actions can be taken to integrate the host into the cluster, and what would happen to the existing ESXi resource pool hierarchy as a result? (Choose two.)___
A. Place all of the host's virtual machines into the DRS cluster root resource pool. The resource pools present on the host will be deleted.
B. Create a resource pool for the ESXi host's virtual machines and resource pools. The resource pools present on the host will be deleted.
C. Place all of the host's virtual machines into the DRS cluster root resource pool. The resource pools present on the host will be preserved.
D. Create a resource pool for the
E. SXi host's virtual machines and resource pools. The resource pools present on the host will be preserved.
【多选题】
Which two parameters are required when adding an iSCSI target to an iSCSI Software Adapter using Dynamic Discovery? (Choose two.)___
A. The iSCSI device's IP Address or Fully Qualified Domain Name
B. The Port Number
C. The iSCSI device's iSCSI Qualified Name (IQN)
D. The Default Gateway IP Address
【多选题】
Which two SMTP Notification Event Details are specific to alarms triggered by events? (Choose two.)___
A. User Name
B. Summary
C. Old Status
D. Target
【多选题】
Which two High Availability ___ Cluster admission control policies can help avoid resource fragmentation? (Choose two.)(AC)
A. Define failover capacity by static number of hosts
B. Define failover capacity by reserving a percentage of the cluster resources
C. Use dedicated failover hosts
D. Use Virtual Machine Monitoring
【多选题】
An attempt to enable vSphere Fault Tolerance for a powered-on virtual machine fails. Which two scenarios would result in this failure? (Choose two.)___
A. The virtual machine has three vCPUs configured.
B. The host on which the virtual machine is running has insufficient memory resources.
C. The virtual machine has insufficient resources to accommodate full reservation plus the overhead memory.
D. VMware High Availability is enabled on the cluster of which this host is a member.
【多选题】
A vApp template recently added to a Content Library is not displayed. Which two actions could correct this problem? (Choose two.)___
A. Manually synchronize the library
B. Select the Download all library content immediately option
C. Select the Sync subscribed library option
D. Manually download the vApp template
【多选题】
What are three valid disk configurations for the vSphere Data Protection 6.x Appliance? (Choose three.)___
A. 500GB
B. 1TB
C. 1.5TB
D. 2TB
E. 4TB
【多选题】
Which three connection types are available when configuring a vSwitch in the vSphere Web Client? (Choose three.)___
A. VMkernel Network Adapter
B. Physical Network Adapter
C. Virtual Machine Port Group for a Standard Switch
D. vMotion Network Adapter
E. vSAN Network Adapter
【多选题】
Which three features can be enabled for a new host cluster? (Choose three.)___
A. Storage Distributed Resource Scheduling
B. High Availability
C. Fault Tolerance
D. Distributed Resource Scheduling
E. Virtual SAN
【多选题】
An administrator receives a report that no real time statistics are available for a virtual machine in the vCenter Server inventory. Which two statements indicate likely causes of the problem? (Choose two.)___
A. The virtual machine is powered off.
B. The host containing the virtual machine is disconnected from vCenter Server.
C. There is insufficient real time data to display the information.
D. The vCenter Server service is not running.
【多选题】
Your manager has given you a bash script that retrieves data for ESXi 6.x host configurations. This data needs to be collected right after the installation of a host and must be run directly on the host. Which two actions can be used to run this script on an ESXi host? (Choose two.)___
A. Connect to the host with Ruby vSphere Console and run the script from there.
B. Enable SSH access from the Direct Console User Interface.
C. Enable the ESXi Shell from the
D. irect Console User Interface.
【多选题】
Which two are true about the Risk badge in vRealize Operations? (Choose two.)___
A. The Risk badge indicates potential future problems that may degrade the performance of the system.
B. Risks may require attention in the near future.
C. The Risk badge indicates problems that are degrading performance of the system.
D. Risks require attention now to correct system performance problems.
【多选题】
vSphere Update Manager allows which two virtual machine attributes to be upgraded? (Choose two.)___
A. Virtual machine firewall policies for NSX.
B. Software Packages in the virtual machine.
C. Virtual machine Hardware Version.
D. VMware Tools Upgrade.
【多选题】
What are two benefits of using NFS 4.1 with vSphere 6.x as compared to NFS 3? (Choose two.)___
A. NFS 4.1 supports Kerberos Authentication
B. NFS 4.1 supports multipathing
C. NFS 4.1 supports IPv6
D. NFS 4.1 supports hardware acceleration
【多选题】
Which three statements are true regarding Fault Tolerance? (Choose three.)___
A. Applications need to be continuously available to users.
B. Applications without native clustering capabilities can be protected.
C. Custom clustering solutions are complicated to configure and maintain.
D. Applications that have 16 vCPUs are supported.
E. Prevents application crashes by analyzing the workload and correcting problems.
【多选题】
Which two statements are true regarding VMware vSphere Flash Read Cache (vFRC)? (Choose two.)___
A. Cache fills and cache evictions happen in the granularity of a cache block size.
B. vFRC caches data from both read and write I/Os, but write I/Os are always serviced by the underlying storage.
C. vFRC caches data from both read and write I/Os, but write I/Os are always serviced by the underlying cache data.
D. Cache fills and cache evictions happen in the granularity of the disk block size.
【多选题】
What are two possible causes of Storage Distributed Resource Scheduler (SDRS) being disabled on one or more virtual machine disks in a datastore cluster? (Choose two.)___
A. The virtual machine has vSphere Fault Tolerance disabled.
B. The virtual machine is a template.
C. The virtual machine swap file is on a shared datastore.
D. The disk is a CD-ROM/ISO file.
【多选题】
An administrator attempts to install vCenter Single Sign-On Server. The installer returns an error message indicating that the installation failed. Prior to the installation, all setup prerequisites were met. The administrator has generated a vCenter Server Single Sign-On support bundle. Which two files should the administrator analyze to determine the cause of the failure? (Choose two.)___
A. Server\utils\logs\imsTrace.log
B. Server\utils\logs\install.txt
C. %TEMP%\utils\logs\vminst.log
D. %TEMP%\vminst.log
【多选题】
An administrator is unable to remove an ESXi 6.x host from a vSphere Distributed Switch. What are two likely reasons for this issue? (Choose two.)___
A. Vmkernel interfaces on the switch are still in use.
B. VM Network port group adapters are connected to different switch.
C. Physical NICs are migrated to different switch.
D. VM Network adapters are connected to this switch.
【多选题】
Which two Identity Sources are available to add for vCenter Single Sign-On authentication? (Choose two.)___
A. LocalOS
B. OpenLDAP
C. NIS as an LDAP Server
D. VCMSDS
推荐试题
【单选题】
以下节型中最大摆角为23°的节型是：___
【单选题】
以下节型中轴向位移量最小的节型是：___
【单选题】
以下对089.5-1008R夹箍描述错误的是：___
A. 夹箍直径为ф89.5
B. 夹箍宽度为10mm
C. 夹箍厚度为0.8mm
D. 字母R表示镀锌夹箍
【单选题】
经常作为智能控制典型研究对象的是（ ） ___
A. 智能机器人
B. 智能故障诊断系统
C. 智能制造系统
D. 智能决策系统
【单选题】
解决自动控制面临问题的一条有效途径就是，把人工智能等技术用入自动控制系统中，其核心是（ ）。 ___
A. 控制器智能化
B. 控制算法
C. 控制结构
D. 控制系统仿真
【单选题】
为了确保安全,用示教编程器手动运行机器人时,机器人的最高速度限制为（ ）。 ___
A. 250mm/s
B. 50mm/s
C. 800mm/s
D. 1600mm/s
【单选题】
试运行是指在不改变示教模式的前提下执行模拟再现动作的功能, 机器人动作速度超过示教最高速度时,以（ ）。 ___
A. 示教最高速度来限制运行
B. 程序给定的速度运行
C. 示教最低速度来运行
D. 程序报错
【单选题】
机器人的定义中，突出强调的是（ ）。___
A. 像人一样思维
B. 模仿人的功能
C. 具有人的形象
D. 感知能力很强
【单选题】
力传感器安装在工业机器人上的位置，通常不会在以下哪个位置（ ）。 ___
A. 机座
B. 机器人腕部
C. 手指指尖
D. 关节驱动器轴上
【单选题】
对于精度要求高的主轴部件，轴承与轴配合时可采用（ ）。___
A. 定向装配
B. 固定装配
C. 浮动装配
D. 互换装配
【单选题】
JLR D8 PHEV 的断开机构是靠那种方式实现的___
A. 液压推动式
B. 机械推动式
C. 电磁推动式
【单选题】
VOLVO主减速器装配选用的齿轮类型：___
A. 弧齿锥齿轮
B. 圆柱齿轮
C. 双曲面齿轮
D. 涡轮蜗杆
【单选题】
主、从动齿轮装配精度的影响因素，不包括下面哪一项___
A. 齿轮的加工质量
B. 调整垫片
C. 轴承压装
D. 油封压装
【单选题】
M24x2-5g6g 6g的公差带是___
【单选题】
正离焦激光焊接是激光聚焦面处于加工工件表面的:___
【单选题】
使用滚切法（Face hob）加工的准双曲面齿轮为___
A. 收缩齿
B. 渐开齿
C. 等高齿
D. 交叉齿
【单选题】
MMeT装配线是使用AGV（Automatic Guided Vehicle）小车进行物料在工位间转运，请问下面那一项不是AGV小车的特性？___
A. 按下启动键后，AGV沿着磁性轨道自动行驶
B. 固定点位自动充电
C. 自动上下物料
D. 区域感应防止行驶时撞击操作工
【单选题】
实轴喷粉的厚度要求为:___
A. 80-100um
B. 60-150cm
C. 60-150um
D. 80-100cm
【单选题】
关于网带炉下面说法错误的是:___
A. 按照工艺要求设置参数
B. 每两小时抽样检测回火硬度
C. 当回火硬度偏低时，应增加回火炉温度
D. 当回火炉硬度偏高时，应在满足工艺的前提下，降低网带速度
【单选题】
自动化（Automation）是指机器设备、系统或过程（生产、管理过程）在没有人或较少人的直接参与下，按照人的要求，经过自动检测、信息处理、___、操纵控制，实现预期的目标的过程。___
A. 机构动作
B. 分析判断
C. 信息整合
D. 闭环反馈
【单选题】
AGV（自动导引运输车），指装备有电磁或光学等自动导引装置，___，具有安全保护以及各种移载功能的运输车___
A. 能够由驾驶员驾驶
B. 能够由编程控制
C. 能够沿规定的导引路径行驶
D. 能够由无线控制器控制
【单选题】
花键球形过度相比圆弧过度的优点是： ___
A. 减小应力集中
B. 易于加工
C. 美观
D. 方便测量
【单选题】
下面哪个不是影响花键装配压力的主要因素 ___
A. 花键的实际齿厚
B. 花键的作用齿厚
C. 花键的螺旋角
D. 花键的加工长度
【单选题】
下面哪个关于高速节的说法是正确的 ___
A. 高速节是安装在纵向传动轴上的一种等速万向节
B. 高速节是安装在纵向传动轴上的一种十字万向节
C. 高速节内不需要加注油脂
D. 高速节是扭矩管理器的组成部分
【单选题】
下面哪一点不属于感应淬火的特点?___
A. 速度快
B. 生产率高
C. 质量高
D. 热效率低
【单选题】
MCR护套压缩比的规格值、目标值分别是多少？___
A. 17%-33%；25%
B. 15%-35%；25%
C. 16%-36%；26%
D. 15%-37%；26%
【单选题】
一些高速铣刀或硬质合金铣刀表面涂敷一层Tie或Tin等材料，其目的是（）___
A. 使刀具更美观
B. 提高刀具的耐磨性
C. 降低铣削时的刀具温度
D. 抗冲击
【单选题】
球笼压碎力检验的频次为（）___
A. 1件/季度
B. 1件/月
C. 1件/天
D. 1件/炉
【单选题】
球笼热处理后硬度一般为（）___
A. HRC54-58
B. HRC58-62
C. HRC62-66
D. HRC66-70
【单选题】
以下哪种球笼热后不需要再硬加工（）___
A. AC节球笼
B. SX节球笼
C. DO节球笼
D. 冷精整球笼
【单选题】
螺栓紧固的本质是：___
A. 紧固后有足够的夹紧力，保证轴向外载荷下零件不分离，横向外载荷下零件不滑移
B. 紧固后有足够的扭矩，保证轴向外载荷下零件不分离，横向外载荷下零件不滑移
C. 紧固后有足够的强度，保证轴向外载荷下零件不分离，横向外载荷下零件不滑移
D. 紧固后有足够的摩擦力，保证轴向外载荷下零件不分离，横向外载荷下零件不滑移
【单选题】
下列不属于过盈配合装配方法的是：___
A. 压装法
B. 热装法
C. 冷装法
D. 修配法
【单选题】
无纸化系统与下列哪个系统直接对现场生产进行跟踪记录？___
A. MPMLink
B. MES
C. SAP
D. ERP
【多选题】
SX目前使用在以下哪些客户的项目上___
【多选题】
UF节相对AC节的优势有哪些___
A. 转弯半径小
B. 制造成本低
C. 抗轴向载荷
D. 较大的工作角度
【多选题】
以下哪些是WTS轴的优势___
A. 重量轻
B. 成本低
C. 刚度高
D. NVH性能好
【多选题】
目前公司等速传动轴使用的夹箍有哪几种___
A. SEC(Stepless Ear Clamp)-单耳无极夹箍
B. MCR(Multicrimp Clamp)整体夹箍
C. Universal Clamp-通用夹箍
D. LPC（Low Profile Clamp)-无耳无级夹箍
【多选题】
关于VL节端盖密封胶的要求哪些是正确的___
A. 密封胶接头可处于任意位置
B. 端盖压紧后密封胶不允许跑入VL外星轮孔和球道中
C. 密封胶应连续，370°分布于端盖六孔PCD圆上
D. 外星轮端面不允许有防锈油
