刷题
导入试题
【多选题】
A 4 GB Memory virtual machine is experiencing extended memory issues, as shown in the Exhibit. What potential issues could be attributed to this memory pressure?___
A. A limit is imposed on the virtual memory of this virtual machine.
B. The Balloon driver has been uninstalled.
C. A limit has been imposed on the Virtual CPU of the virtual machine.
D. Storage IO control has been enabled for the virtual machine causing the swapped memory.
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
AB
解析
暂无解析
相关试题
【多选题】
You are creating a virtual machine in the Web Client using the New Virtual Machine wizard. Which two steps are required? (Choose two.)___
A. Select a valid name.
B. Select a cluster for the compute resource.
C. Select a network adapter.
D. Select the virtual machine compatibility.
【多选题】
An administrator has been given requirements to configure vMotion for a new virtual machine. The configuration should: <Provide Network Redundancy Use VLAN 550> <Be secured against anyone trying to spoof communication The vSwitch1 configuration is shown in the Exhibit.> Which three changes should be made to meet the stated requirements? (Choose three.)___
A. The VLAN ID must be set appropriately.
B. The default values for MAC Address Changes and Forged Transmits must be altered.
C. The teaming and failover adapters must be set appropriately.
D. The Traffic Shaping configuration must be altered.
E. The Load Balancing Policy must be set appropriately.
【多选题】
Which three traffic types are available services options when configuring a vmkernel port? (Choose three.)___
A. Provisioning Traffic
B. Virtual Volumes Traffic
C. vSphere Replication NFC Traffic
D. Virtual SAN Traffic
E. FCoE Traffic
【多选题】
An administrator logs into the vSphere Web Client, but is unable to see any hosts and clusters. Which two options could fix the problem? (Choose two.)___
A. Verify that the client web browser and vCenter Server are in the same broadcast domain.
B. Verify that the vCenter Server system is registered with the same Platform Services Controller as the vSphere Web Client.
C. Log in to the vCenter Server as a user within the Active
D. irectory domain.
【多选题】
Which three VLAN Tagging modes are available in vSphere 6.x? (Choose three.)___
A. External Switch Tagging
B. Private VLAN Tagging
C. Virtual Switch Tagging
D. VXLAN Tagging
E. Virtual Guest Tagging
【多选题】
Which two statements are true about VMFS5 datastores on ESXi 6.x? (Choose two.)___
A. Virtual Disk (VMDK) size can be larger than 2TB.
B. Datastore extent size can be larger than 2TB.
C. Only Physical Mode Raw
D. evice Map (Passthrough-RDM) can be larger than 2TB.
【多选题】
Which two statements are correct when turning off a Distributed Resource Scheduler (DRS) Cluster? (Choose two.)___
A. The resource pool hierarchy of the DRS cluster is maintained.
B. The resource pool hierarchy of the DRS cluster is removed.
C. The affinity settings of the
D. RS cluster are removed and not maintained when DRS is re-enabled.
【多选题】
An administrator is creating a new Virtual SAN cluster on a Layer 2 network. There is an existing Virtual SAN cluster on the same Layer 2 network. Which two actions would allow the new Virtual SAN cluster to coexist with the older cluster? (Choose two.)___
A. Change the default Multicast Address on the new Virtual SAN cluster.
B. Change the default Unicast Address on the new Virtual SAN Cluster.
C. Create a separate VLAN for each cluster.
D. Create an ARP Alias for the Virtual SAN VMkernel Network Adapter.
【多选题】
A vCenter Operations Manager 5.7 environment is upgraded to vRealize Operations. After the upgrade, the analytics services fail to start. Which three steps must be taken to resolve the problem? (Choose three.)___
A. Take the vRealize Operations cluster offline.
B. Delete the activity persistence files.
C. Bring the cluster back online.
D. Remove any unresponsive nodes.
E. Stop the CaSA service.
【多选题】
An organization has an ESXi 6.x host that contains two resource pools. The host is being relocated to a DRS cluster. What two actions can be taken to integrate the host into the cluster, and what would happen to the existing ESXi resource pool hierarchy as a result? (Choose two.)___
A. Place all of the host's virtual machines into the DRS cluster root resource pool. The resource pools present on the host will be deleted.
B. Create a resource pool for the ESXi host's virtual machines and resource pools. The resource pools present on the host will be deleted.
C. Place all of the host's virtual machines into the DRS cluster root resource pool. The resource pools present on the host will be preserved.
D. Create a resource pool for the
E. SXi host's virtual machines and resource pools. The resource pools present on the host will be preserved.
【多选题】
Which two parameters are required when adding an iSCSI target to an iSCSI Software Adapter using Dynamic Discovery? (Choose two.)___
A. The iSCSI device's IP Address or Fully Qualified Domain Name
B. The Port Number
C. The iSCSI device's iSCSI Qualified Name (IQN)
D. The Default Gateway IP Address
【多选题】
Which two SMTP Notification Event Details are specific to alarms triggered by events? (Choose two.)___
A. User Name
B. Summary
C. Old Status
D. Target
【多选题】
Which two High Availability ___ Cluster admission control policies can help avoid resource fragmentation? (Choose two.)(AC)
A. Define failover capacity by static number of hosts
B. Define failover capacity by reserving a percentage of the cluster resources
C. Use dedicated failover hosts
D. Use Virtual Machine Monitoring
【多选题】
An attempt to enable vSphere Fault Tolerance for a powered-on virtual machine fails. Which two scenarios would result in this failure? (Choose two.)___
A. The virtual machine has three vCPUs configured.
B. The host on which the virtual machine is running has insufficient memory resources.
C. The virtual machine has insufficient resources to accommodate full reservation plus the overhead memory.
D. VMware High Availability is enabled on the cluster of which this host is a member.
【多选题】
A vApp template recently added to a Content Library is not displayed. Which two actions could correct this problem? (Choose two.)___
A. Manually synchronize the library
B. Select the Download all library content immediately option
C. Select the Sync subscribed library option
D. Manually download the vApp template
【多选题】
What are three valid disk configurations for the vSphere Data Protection 6.x Appliance? (Choose three.)___
A. 500GB
B. 1TB
C. 1.5TB
D. 2TB
E. 4TB
【多选题】
Which three connection types are available when configuring a vSwitch in the vSphere Web Client? (Choose three.)___
A. VMkernel Network Adapter
B. Physical Network Adapter
C. Virtual Machine Port Group for a Standard Switch
D. vMotion Network Adapter
E. vSAN Network Adapter
【多选题】
Which three features can be enabled for a new host cluster? (Choose three.)___
A. Storage Distributed Resource Scheduling
B. High Availability
C. Fault Tolerance
D. Distributed Resource Scheduling
E. Virtual SAN
【多选题】
An administrator receives a report that no real time statistics are available for a virtual machine in the vCenter Server inventory. Which two statements indicate likely causes of the problem? (Choose two.)___
A. The virtual machine is powered off.
B. The host containing the virtual machine is disconnected from vCenter Server.
C. There is insufficient real time data to display the information.
D. The vCenter Server service is not running.
【多选题】
Your manager has given you a bash script that retrieves data for ESXi 6.x host configurations. This data needs to be collected right after the installation of a host and must be run directly on the host. Which two actions can be used to run this script on an ESXi host? (Choose two.)___
A. Connect to the host with Ruby vSphere Console and run the script from there.
B. Enable SSH access from the Direct Console User Interface.
C. Enable the ESXi Shell from the
D. irect Console User Interface.
【多选题】
Which two are true about the Risk badge in vRealize Operations? (Choose two.)___
A. The Risk badge indicates potential future problems that may degrade the performance of the system.
B. Risks may require attention in the near future.
C. The Risk badge indicates problems that are degrading performance of the system.
D. Risks require attention now to correct system performance problems.
【多选题】
vSphere Update Manager allows which two virtual machine attributes to be upgraded? (Choose two.)___
A. Virtual machine firewall policies for NSX.
B. Software Packages in the virtual machine.
C. Virtual machine Hardware Version.
D. VMware Tools Upgrade.
【多选题】
What are two benefits of using NFS 4.1 with vSphere 6.x as compared to NFS 3? (Choose two.)___
A. NFS 4.1 supports Kerberos Authentication
B. NFS 4.1 supports multipathing
C. NFS 4.1 supports IPv6
D. NFS 4.1 supports hardware acceleration
【多选题】
Which three statements are true regarding Fault Tolerance? (Choose three.)___
A. Applications need to be continuously available to users.
B. Applications without native clustering capabilities can be protected.
C. Custom clustering solutions are complicated to configure and maintain.
D. Applications that have 16 vCPUs are supported.
E. Prevents application crashes by analyzing the workload and correcting problems.
【多选题】
Which two statements are true regarding VMware vSphere Flash Read Cache (vFRC)? (Choose two.)___
A. Cache fills and cache evictions happen in the granularity of a cache block size.
B. vFRC caches data from both read and write I/Os, but write I/Os are always serviced by the underlying storage.
C. vFRC caches data from both read and write I/Os, but write I/Os are always serviced by the underlying cache data.
D. Cache fills and cache evictions happen in the granularity of the disk block size.
【多选题】
What are two possible causes of Storage Distributed Resource Scheduler (SDRS) being disabled on one or more virtual machine disks in a datastore cluster? (Choose two.)___
A. The virtual machine has vSphere Fault Tolerance disabled.
B. The virtual machine is a template.
C. The virtual machine swap file is on a shared datastore.
D. The disk is a CD-ROM/ISO file.
【多选题】
An administrator attempts to install vCenter Single Sign-On Server. The installer returns an error message indicating that the installation failed. Prior to the installation, all setup prerequisites were met. The administrator has generated a vCenter Server Single Sign-On support bundle. Which two files should the administrator analyze to determine the cause of the failure? (Choose two.)___
A. Server\utils\logs\imsTrace.log
B. Server\utils\logs\install.txt
C. %TEMP%\utils\logs\vminst.log
D. %TEMP%\vminst.log
【多选题】
An administrator is unable to remove an ESXi 6.x host from a vSphere Distributed Switch. What are two likely reasons for this issue? (Choose two.)___
A. Vmkernel interfaces on the switch are still in use.
B. VM Network port group adapters are connected to different switch.
C. Physical NICs are migrated to different switch.
D. VM Network adapters are connected to this switch.
【多选题】
Which two Identity Sources are available to add for vCenter Single Sign-On authentication? (Choose two.)___
A. LocalOS
B. OpenLDAP
C. NIS as an LDAP Server
D. VCMSDS
【多选题】
What are three goals of resource management within a cluster? (Choose three.)___
A. To prevent virtual machines from monopolizing resources and to guarantee predictable service rates.
B. To exploit undercommitted resources and overcommit with graceful degradation.
C. To provide solutions to potential problems that you might encounter when using vCenter Server.
D. To control the relative importance of virtual machines and provide flexible dynamic partitioning.
E. To provide additional network administration capabilities.
【多选题】
Which three actions can be taken as a result of executing the vSphere Update Manager 6.x scan and remediation wizards? (Choose three.)___
A. Install and upgrade software in virtual machines.
B. Upgrade the firmware on ESXi host devices.
C. Upgrade and Patch ESXi hosts.
D. Install and update third-party software on hosts.
E. Upgrade virtual machine hardware.
【多选题】
Which two statements are true about deploying and using vSphere Replication? (Choose two.)___
A. ESXi hosts managed by a single vCenter Server instance require a connection between the two vSphere Replication appliances.
B. Sites managed by different vCenter Server instances require a connection between the two vSphere Replication appliances.
C. Sites managed by different vCenter Server instances require the use of Site Recovery Manager and a connection between the two vSphere Replication appliances.
D. ESXi hosts managed by a single vCenter Server instance require a single vSphere Replication appliance.
【多选题】
An administrator is attempting to power on a virtual machine, but the task is hanging at 95%. What three scenarios best explain why this problem is happening? (Choose three.)___
A. A virtual machine question is currently being posed to the administrator.
B. Another task for the virtual machine or other component is already in progress.
C. The VMware High Availability cluster has insufficient resources to guarantee failover.
D. The host has lost access to the storage device containing the virtual machine files.
E. The host is under resource contention and unable to power on the virtual machine.
【多选题】
Which three features are not supported when using Fault Tolerance in vSphere 6.x? (Choose three.)___
A. Virtual Volumes (VVOLS)
B. Storage vMotion
C. Virtual Machine Component Protection
D. vMotion
E. vSphere Distributed Switches
【多选题】
Which two storage controller configurations can be used with Virtual SAN? (Choose two.)___
A. SAS controllers in Passthrough mode
B. SAS controllers in RAID0 mode
C. SAS controllers in RAID1 mode
D. SAS controllers in RAID10 mode
【多选题】
Which three are requirements when using vMotion to move a virtual machine across vCenter Server systems? (Choose three.)___
A. Both vCenter Servers must be using Enhanced Linked Mode.
B. Both vCenter Servers must be in the same Single Sign-On Domain.
C. Time must be synchronized.
D. Duplicate VM MAC addresses must be configured.
E. Both vCenter Servers must have High Availability enabled on source and destination clusters.
【多选题】
Which two components can be used when configuring Enhanced Linked Mode? (Choose two.)___
A. vCenter Server Appliance
B. vRealize Operations Manager
C. vSphere Management Appliance
D. vCenter Server for Windows
【多选题】
An organization has a number of virtual machines that would benefit from Fault Tolerance. These include: <A single vCPU Apache Server> < A dual vCPU vCenter Server> < A quad vCPU SQL Server> <An eight vCPU Hadoop Server>. Which two virtual machines can be configured to use VMware Fault Tolerance? (Choose two.)___
A. Apache Server
B. vCenter Server
C. SQL Server
D. Hadoop Server
【多选题】
Which two badges are major badges in vRealize Operations? (Choose two.)___
A. Risk
B. Efficency
C. Workload
D. Faults
【多选题】
An administrator is deploying multiple Windows 2003 Virtual Machines from the same template. What two steps should be taken to avoid network conflicts? (Choose two.)___
A. Customize the guest operating system.
B. Install VMware Tools into the new virtual machines.
C. Copy the Microsoft Sysprep tools onto the vCenter Server system.
D. Ensure the e1000 vmnic is selected for each new virtual machine.
推荐试题
【单选题】
缝翼扭矩限制器安装在()___
A. 扭力轴上
B. 作动筒上
C. PCU输出轴上
D. PCU马达上
【单选题】
个失效的侧杆如何被恢复()___
A. 通过瞬时,按压住该侧杆的优先控制按钮
B. 操作失效侧杆时,比另一边用更大的劲
C. 同时按压两侧杆的优先控制按钮
D. 在地面通过MCDU进行复位测试
【单选题】
关于一个扰流板控制说法正确的是()___
A. 仅由一个SEC控制
B. 由两个SEC同时控制
C. 由两个SEC控制,一个SEC在工作状态,另一个在备用状态
D. 由一个ELAC和一个SEC控制
【单选题】
何时地面扰流板处于预位状态()___
A. 当速度刹车手柄被拉起来时
B. 当速度刹车手柄被压下时
C. 当飞机起落架被压缩时
D. 拉反推时
【单选题】
何时升降舵作动筒处于定中模式()___
A. 当升降舵作动筒故障时
B. 当人工进行俯仰配平时
C. 当ELAC1计算机故障时
D. 当ELAC1和ELAC2都故障时
【单选题】
机长处的侧杆优先“CAPT”绿灯亮表示()___
A. 机长具有优先权,且副驾驶的侧杆不在中立位
B. 机长和副驾驶同时具有控制
C. 机长具有优先权,且副驾驶侧杆在中立位
D. 机长不具有优先控制权
【单选题】
机长处的侧杆优先红色箭头灯亮表示()___
A. 机长具有控制权
B. 机长处的侧杆故障
C. 机长失去控制权
D. 机长具有优先控制权
【单选题】
襟翼PCU中的POB(压力关断刹车)在什么情况下会锁住马达的输出轴()___
A. 当选择的襟翼位置到达时
B. 当没有襟翼动作指令时
C. 液压系统故障时
D. A+B+C
【单选题】
襟翼PCU中valve组件的功用是()___
A. 控制相应PCU输出轴的旋转方向和速度
B. 给SFCC提供输出轴反馈信号
C. 提供输出轴的刹车液压
D. 提供WTB刹车液压
【单选题】
襟翼WTB安装在()___
A. 翼尖
B. 在每边机翼的3号和4号滑轨之间
C. 在作动筒上
D. PCU上
【单选题】
襟翼手柄的作用()___
A. 只能控制襟翼
B. 只能控制缝翼
C. 可同时控制襟翼和缝翼
D. 可控制速度刹车
【单选题】
襟翼手柄置于位置“3”表示()___
A. 襟翼伸出了
B. 襟/缝翼处于伸出“3”个单位这种构形
C. 襟翼同时伸出3°
D. 襟翼手柄处于3°
【单选题】
具有机械备用操作方式的操纵面是()___
A. 方向舵和水平安定面
B. 方向舵和升降舵
C. 副翼和方向舵
D. 副翼和水平安定面
【单选题】
每个副翼有几个作动筒()___
A. 2个
B. 3个
C. 4个
D. 1个
【单选题】
哪个传感器向ECAM提供襟缝翼实际位置信号()___
A. FPPU(反馈位置传感器)
B. APPU不对称位置传感器
C. IPPU(仪表位置传感器)
D. WTB翼尖刹车
【单选题】
哪个信号可引起方向舵脚蹬移动()___
A. 偏航阻尼信号
B. 方向舵配平信号
C. 协调转弯信号
D. 水平安定面配平信号
【单选题】
哪些飞控计算机控制和监控偏航阻尼器伺服作动筒()___
A. ELACS和SELS
B. ELACS,SECS和FACS
C. FACS
D. ELACS
【单选题】
哪些计算机接受侧杆的指令()___
A. 仅ELACS
B. ELACS和SECS
C. FCDCS
D. SFCC
【单选题】
哪些扰流板组成飞行扰流板()___
A. 2,3,4,5号扰流板
B. 3,4,5号扰流板
C. 1,2,3,4,5号扰流板
D. 1,2,3,4号扰流板
【单选题】
能控制方向舵的计算机是()___
A. SEC
B. FAC
C. SFCC
D. FWC
【单选题】
能控制副翼的计算机是()___
A. SEC
B. SEC和ELAC
C. ELAC
D. FAC
【单选题】
能控制襟翼和缝翼的计算机是()___
A. ELAC
B. SEC
C. SFCC
D. ELAC和SEC
【单选题】
能控制扰流板的计算机是()___
A. ELAC
B. FAC
C. ELAC和SEC
D. SEC
【单选题】
能控制升降舵的计算机是()___
A. SEC和ELAC
B. FAC
C. SFCC
D. DMC
【单选题】
扰流板,副翼,升降舵,方向舵是由什么材料制成的()___
A. 铝合金
B. 复合材料
C. 不锈钢
D. 钛合金
【单选题】
如果SFCC1计算机故障,对襟翼系统的工作有何影响()___
A. 襟翼被WTB锁定
B. 不受影响
C. 襟翼系统的运动速度减半
D. 襟翼自动收回
【单选题】
如果THS的一个电配平马达故障,则()___
A. THS电配平失效
B. THS半速配平
C. THS电配平完全可用
D. 只能通过机械备用方式配平
【单选题】
如果两个ELAC故障,则()___
A. 所有的副翼作动筒都处于定中模式
B. 所有的副翼作动筒都处于阻尼模式
C. 所有的副翼作动筒都处于工作模式
D. 副翼可通过机械备用操作
【单选题】
如果两个FAC故障,当缝翼伸出时,方向舵行程限制将会选择()___
A. 低速构形
B. 高速构形
C. 保持不变
D. 中立位
【单选题】
如果扰流板伺服控制作动筒失去电信号,则作动筒将处于()___
A. 偏置模式
B. 开锁模式
C. 工作模式
D. 人工模式
【单选题】
如果扰流板液压作动筒已经伸出,这时突然失去液压,会出现下列什么现象()___
A. 扰流板自动收回
B. 扰流板保持中立
C. 备用液压会立即给扰流板作动筒供液压
D. 扰流板保持在伸出位,或由气动原因向收回位移动
【单选题】
如果失去绿液压系统,横滚控制由以下哪些操纵舵面完成()___
A. 副翼和扰流板板2,3,4,5
B. 副翼和扰流板2,3,4
C. 仅由2,3,4号副翼
D. 副翼和方向
【单选题】
如果一个SEC计算机故障或断电,则()___
A. 相应的扰流板会自动收回
B. 相应的扰流板保持在原位
C. 所有扰流板会自动收回
D. 所有的扰流板保持在原位
【单选题】
如果一个襟翼PCU马达不工作,则襟翼将()___
A. 襟翼控制失效
B. 襟翼的移动不受影响
C. 襟翼动作速度减半
D. 系统被锁死,襟翼不能再移动
【单选题】
如果右边的优先控制按钮,按压超过40秒钟,则()___
A. 在右边的优先控制按钮松开后,左边侧杆保持失效
B. 右边的优先控制按钮松开后,左侧杆操作有效
C. 两边侧杆都失效
D. 两侧杆都操作有效
【单选题】
如果在飞控页面的扰流板显示area出现琥珀色的数字“5”,且上面有一个三角形表示()___
A. 5号扰流板不能伸出
B. 5号扰流板工作正常
C. 5号扰流板因故障收回
D. 5号扰流板故障,且扰流板伸出
【单选题】
如果左侧副翼的两个作动筒故障,则右侧的副翼如何工作()___
A. 保持可操作状态
B. 始终处于阻尼模式
C. 需将两个ELAC人工脱开
D. 不能操作
【单选题】
什么情况下,速度刹车会自动收回()___
A. 起落架放下
B. 襟翼放下3个单位
C. 缝翼放下2个单位
D. 飞机迎角保护起作用
【单选题】
什么情况下可使用钢索对飞机进行机械备用控制()___
A. 所有发动机液压驱动泵故障
B. 发动机驱动泵和电动泵都故障
C. 正常和备用液压系统均失效
D. 飞机完全失去电源,或所有飞控计算机故障
【单选题】
什么原因会导致方向舵伺服作动筒处于阻尼模式()___
A. 当失去液压时
B. 当失去ELAC1信号时
C. 当失去FAC2和FAC3信号时
D. 起飞过程中
欢迎使用我爱刷题
×
微信搜索我爱刷题小程序
温馨提示
×
请在电脑上登陆“www.woaishuati.com”使用