【多选题】
An administrator attempts to install vCenter Single Sign-On Server. The installer returns an error message indicating that the installation failed. Prior to the installation, all setup prerequisites were met. The administrator has generated a vCenter Server Single Sign-On support bundle. Which two files should the administrator analyze to determine the cause of the failure? (Choose two.)___
A. Server\utils\logs\imsTrace.log
B. Server\utils\logs\install.txt
C. %TEMP%\utils\logs\vminst.log
D. %TEMP%\vminst.log
查看试卷，进入试卷练习
微信扫一扫，开始刷题
相关试题
【多选题】
An administrator is unable to remove an ESXi 6.x host from a vSphere Distributed Switch. What are two likely reasons for this issue? (Choose two.)___
A. Vmkernel interfaces on the switch are still in use.
B. VM Network port group adapters are connected to different switch.
C. Physical NICs are migrated to different switch.
D. VM Network adapters are connected to this switch.
【多选题】
Which two Identity Sources are available to add for vCenter Single Sign-On authentication? (Choose two.)___
A. LocalOS
B. OpenLDAP
C. NIS as an LDAP Server
D. VCMSDS
【多选题】
What are three goals of resource management within a cluster? (Choose three.)___
A. To prevent virtual machines from monopolizing resources and to guarantee predictable service rates.
B. To exploit undercommitted resources and overcommit with graceful degradation.
C. To provide solutions to potential problems that you might encounter when using vCenter Server.
D. To control the relative importance of virtual machines and provide flexible dynamic partitioning.
E. To provide additional network administration capabilities.
【多选题】
Which three actions can be taken as a result of executing the vSphere Update Manager 6.x scan and remediation wizards? (Choose three.)___
A. Install and upgrade software in virtual machines.
B. Upgrade the firmware on ESXi host devices.
C. Upgrade and Patch ESXi hosts.
D. Install and update third-party software on hosts.
E. Upgrade virtual machine hardware.
【多选题】
Which two statements are true about deploying and using vSphere Replication? (Choose two.)___
A. ESXi hosts managed by a single vCenter Server instance require a connection between the two vSphere Replication appliances.
B. Sites managed by different vCenter Server instances require a connection between the two vSphere Replication appliances.
C. Sites managed by different vCenter Server instances require the use of Site Recovery Manager and a connection between the two vSphere Replication appliances.
D. ESXi hosts managed by a single vCenter Server instance require a single vSphere Replication appliance.
【多选题】
An administrator is attempting to power on a virtual machine, but the task is hanging at 95%. What three scenarios best explain why this problem is happening? (Choose three.)___
A. A virtual machine question is currently being posed to the administrator.
B. Another task for the virtual machine or other component is already in progress.
C. The VMware High Availability cluster has insufficient resources to guarantee failover.
D. The host has lost access to the storage device containing the virtual machine files.
E. The host is under resource contention and unable to power on the virtual machine.
【多选题】
Which three features are not supported when using Fault Tolerance in vSphere 6.x? (Choose three.)___
A. Virtual Volumes (VVOLS)
B. Storage vMotion
C. Virtual Machine Component Protection
D. vMotion
E. vSphere Distributed Switches
【多选题】
Which two storage controller configurations can be used with Virtual SAN? (Choose two.)___
A. SAS controllers in Passthrough mode
B. SAS controllers in RAID0 mode
C. SAS controllers in RAID1 mode
D. SAS controllers in RAID10 mode
【多选题】
Which three are requirements when using vMotion to move a virtual machine across vCenter Server systems? (Choose three.)___
A. Both vCenter Servers must be using Enhanced Linked Mode.
B. Both vCenter Servers must be in the same Single Sign-On Domain.
C. Time must be synchronized.
D. Duplicate VM MAC addresses must be configured.
E. Both vCenter Servers must have High Availability enabled on source and destination clusters.
【多选题】
Which two components can be used when configuring Enhanced Linked Mode? (Choose two.)___
A. vCenter Server Appliance
B. vRealize Operations Manager
C. vSphere Management Appliance
D. vCenter Server for Windows
【多选题】
An organization has a number of virtual machines that would benefit from Fault Tolerance. These include: <A single vCPU Apache Server> < A dual vCPU vCenter Server> < A quad vCPU SQL Server> <An eight vCPU Hadoop Server>. Which two virtual machines can be configured to use VMware Fault Tolerance? (Choose two.)___
A. Apache Server
B. vCenter Server
C. SQL Server
D. Hadoop Server
【多选题】
Which two badges are major badges in vRealize Operations? (Choose two.)___
A. Risk
B. Efficency
C. Workload
D. Faults
【多选题】
An administrator is deploying multiple Windows 2003 Virtual Machines from the same template. What two steps should be taken to avoid network conflicts? (Choose two.)___
A. Customize the guest operating system.
B. Install VMware Tools into the new virtual machines.
C. Copy the Microsoft Sysprep tools onto the vCenter Server system.
D. Ensure the e1000 vmnic is selected for each new virtual machine.
【多选题】
Which three conditions would prevent Storage I/O Control from being enabled on a group of datastores? (Choose three.)___
A. The datastores planned for the solution are used by different vSphere clusters.
B. A datastore planned for the solution is configured as a Raw Device Mapping file.
C. A datastore planned for the solution has three extents.
D. A datastore planned for the solution is configured as NFS.
E. The organization has an Enterprise license.
【多选题】
Which two actions are prerequisites to adding ESXi 6.x hosts to a vSphere Distributed Switch? (Choose two.)___
A. Verify that there is at least one Distributed Port Group on the Distributed Switch.
B. Verify that the Distributed Port Group have active uplinks configured in its teaming and failover policy.
C. Verify that the
D. istributed Switch has been configured with a Network Profile.
【多选题】
An organization has configured Distributed Power Management (DPM) on a vSphere 6 cluster. The organization wants to be alerted when an ESXi host has been powered down by DPM. Which two options represent the type and name of the alarm that would accomplish this? (Choose two.)___
A. DrsEnteringStandbyModeEvent
B. DrsEnteredStandbyModeEvent
C. Event-based
D. Condition-based
【多选题】
Which two allow for the disabling of Network Rollback operations? (Choose two.)___
A. Modifying the vpxd advanded configuration options and adding the config.vpxd.network.rollback key
B. Modifying the C:\ProgramData\VMware\CIS\cfg\vmware-vpx\vpxd.cfg file and adjusting the<rollback> xml tag
C. Modifying the C:\ProgramData\VMware\CIS\cfg\vmware-vpx\vpxd.cfg file and adjusting the <networkrollback> xml tag
D. Modifying the C:\ProgramData\VMware\CIS\cfg\vmware-vpx\firstboot\vpxd-service- spec.prop file and adjusting the <rollback> xml tag
【多选题】
An administrator is tasked with performing a vMotion migration of a virtual machine. The virtual machine is configured as follows: <vSphere Flash Read Cache (vFRC) enabled> <Is part of a Distributed Resource Cluster (DRS) Cluster> Which two statements are true? (Choose two.)___
A. Each ESXi host in the cluster supports multiple virtual flash resources.
B. Each ESXi host in the cluster supports one virtual flash resource.
C. DRS treats powered-on virtual machines with Flash Read Cache as having a preferred affinity to their current host and moves them only for mandatory reasons.
D. DRS treats powered-on virtual machines with Flash Read Cache as having a required affinity to their current host and does not move them.
【多选题】
An administrator is using the Host Failures to Tolerate Admission Control Policy for a vSphere High Availability ___ cluster. When configuring this setting on the cluster, the administrator sees this error message: <Insufficient resources to satisfy HA failover level on cluster > What are two likely causes for the error? (Choose two.)(AB)
A. The hosts in the cluster are disconnected.
B. A host in the cluster is displaying an HA error.
C.
D. istributed Resource Scheduler has not been configured on the cluster.
【多选题】
What are two ways to identify TCP/IP stack information? (Choose two.)___
A. Using the vSphere Web Client
B. Using esxcli network ip netstack
C. Using esxcfg-netstack
D. Using the vSphere Client
【多选题】
Which two actions are required when enabling vFlash Read Cache for a virtual machine's virtual disk? (Choose two.)___
A. A value in the Virtual Flash Read Cache text box must be entered.
B. A Flash Resource Pool for Cache size reservation must be entered.
C. The Device backing and the block size must be configured.
D. The
E. nable virtual flash host swap cache check box must be selected.
【多选题】
What two IT infrastructure components are virtualized by vSphere Essentials? (Choose two.)___
A. Networks
B. Applications
C. Storage
D. Management
【多选题】
When attempting to access a virtual machine, an administrator is unable to login using the vSphere credentials. What two options are probable causes of the authentication failure? (Choose two.)___
A. The vSphere credentials have not been granted permissions.
B. The vSphere credentials are granted read-only permissions.
C. The vSphere credentials are granted no-access permissions.
D. The vSphere credentials are not a member of the local administrator group.
【多选题】
An administrator is performing a scripted installation of ESXi 6.x. In which three locations does the script need to be? (Choose three.)___
A. PXE Server
B. HTTPS
C. FTP
D. NFS
E. VVOLs Datastore
【多选题】
In order for a company to meet regulatory requirements, all ESXi 6.x Hosts must be configured to direct logs to a syslog server. What are two ways ESXi hosts can configured for this action? (Choose two)___
A. Use the esxcli system syslog command.
B. Edit them in the ESXi host Advanced System Settings.
C. From the Syslog collector user interface of the Web Client.
D. Syslog logging is not available for
E. SXi Hosts.
【多选题】
Which three actions can be executed when an alarm is triggered? (Choose three.)___
A. Send an email.
B. Send an SNMP trap.
C. Run a script or command.
D. Run an Orchestrator workflow.
E. Send a trigger to syslog.
【多选题】
An administrator is attempting to power on a virtual machine, but is unable to do so. Which two reasons are probable causes of the failure? (Choose two.)___
A. Storage access to the virtual machine swap file has been lost.
B. One of the virtual machine VMDK files is locked.
C. Virtual machine is running CentOS 7.0 64-bit.
D. Virtual machine has Hyper-Threading enabled.
【多选题】
An administrator has configured a host profile so that ESXi 6.x hosts will point to the corporate NTP server for time synchronization. The NTP server is located at 10.0.30.213, but time has not been synchronized properly across the ESXi hosts. The administrator reviews Host Profile settings as shown in the Exhibit. Which two steps are required to resolve the issue? (Choose two.)___
A. Correct the NTP server IP address.
B. Check the host for host profile compliance.
C. Remediate the host based on the updated host profile.
D. Change the NTP server to the FQDN as IP Addresses are not supported.
【多选题】
An administrator is attempting to migrate a large Hadoop virtual machine using vMotion. The administrator notices a delay when the machine is quiesced. The Hadoop virtual machine is processing many transactions a second to an in-memory database. Which two actions would help reduce the amount of time needed to perform a vMotion on this virtual machine? (Choose two.)___
A. Use multiple NICs for the vMotion vmkernel port.
B. Use a 10Gbps Network card for the vMotion vmkernel port.
C. Add an additional management network to help transmit the data quicker.
D. Disable Fault Tolerance before performing the vMotion.
【多选题】
An administrator is installing a new network card in an ESXi 6.x host that is part of a vSphere cluster. When the host is placed into maintenance mode, the vSphere Web Client displays the progress bar at 2% for over 30 minutes. Which two are likely reasons for this occurrence? (Choose two.)___
A. Maintenance mode is unable to migrate all virtual machines from the host.
B. There is a large number of virtual machines that must be migrated from the host.
C. VMware High Availability is in the process of reconfiguring the cluster.
D. Each virtual machine on the
E. SXi host must be reconfigured to recognize the new adapter.
【多选题】
Which two events happen when Distributed Resource Scheduler (DRS) is disabled? (Choose two.)___
A. The cluster's resource pool heirarchy and affinity rules are re-established when DRS is turned back on.
B. The cluster's resource pool hierarchy and affinity rules are not re-established when DRS is turned back on.
C. The cluster's resource pools are removed from the cluster.
D. The cluster's resource pools are removed from the cluster and assigned to the hosts.
【多选题】
Which two networking connection types can be configured on a virtual switch? (Choose two.)___
A. Virtual machine portgroups
B. VMkernel services (such as NFS, iSCSI, or vMotion) to the physical network
C. Web services over the Management Network
D. NFS and FCoE storage services
【多选题】
An administrator creates a DRS cluster of eight ESXi 6.x hosts. There are 10 virtual machines balanced across the hosts. An attempt to place the first host into maintenance mode fails. What are two reasons that the host failed to enter maintenance mode? (Choose two.)___
A. The DRS cluster Automation Level is set to Partially Automated mode.
B. One of the virtual machines on the ESXi Host entering maintenance mode is configured with a DRS Host affinity rule Should run on hosts in group.
C. One of the virtual machines on the ESXi Host entering maintenance mode is configured with a DRS Host affinity rule Must run on hosts in group.
D. One of the virtual machines on the
E. SXi Host entering maintenance mode is configured with an individual Automation Level set to Partially Automated.
【多选题】
When modifying a vApp, which two vSphere entities can be added? (Choose two.)___
A. A resource pool
B. A network pool
C. A vApp
D. A folder
【多选题】
From which two locations in the inventory hierarchy can you deploy a virtual machine using a template? (Choose two.)___
A. Directly from the template.
B. From a compute resource.
C. From an existing virtual machine.
D. From a Datastore.
【多选题】
A company has decided to implement Virtual SAN within their vSphere 6.x environment. The Virtual SAN cluster will be composed of three ESXi 6.x hosts that are on the Virtual SAN Ready Node list. Each ESXi host includes: <Two SAS Controllers that support Passthrough Mode> < Four Solid State Drives (SSDs) 1TB in size each> <20 SAS Magnetic Disks (MDs) 1TB in size each> <The SSDs and MDs are evenly split between the two SAS controllers>. The company will pilot a Virtual SAN cluster utilizing VMware best practices while maximizing storage capacity. The Virtual SAN cluster will use Manual Mode. Which two Disk Group configurations would meet the stated configuration requirements? (Choose two.)___
A. 4 disk groups with 1 SSD and 5 MDs each
B. 2 disk groups with 1 SSD and 7 MDs each
C. 2 disk groups with 2 SSDs and 7 MDs each
D. 2 disk groups with 1 SSD and 10 MDs each
【多选题】
A physical Windows 2008 R2 Server is converted to a virtual machine using VMware vCenter Converter. Upon completion of the conversion and subsequent power on operation, the virtual machine fails to boot and the message below is observed in the Console of the virtual machine: <STOP 0x0000007B INACCESSIBLE_BOOT_DEVICE>. Which two potential issues may be causing this boot failure? (Choose two.)___
A. An incorrect SCSI controller was selected during conversion.
B. Incompatible software drivers were migrated into the virtual machine from the source machine.
C. The vmdk file backing the virtual machine was thick provisioned.
D. A snapshot was taken immediately after the conversion completed.
【多选题】
An administrator is configuring the Failover Order option on a vSphere Distributed Switch. Which two options should be used with IP-hash load balancing? (Choose two.)___
A. Active Uplinks
B. Standby Uplinks
C. Unused Uplinks
D. Override Failover Order
【多选题】
An administrator is configuring the Maximum Transmission Unit value on a vSphere Distributed Switch. Which two options are typical values for ESXi networking? (Choose two.)___
A. 1492
B. 1500
C. 9000
D. 9089
【多选题】
Which two configurable options apply to both virtual machine CPU and memory allocation? (Choose two.)___
A. Reservation
B. Shares
C. Resource Pool
D. Reserve All
推荐试题
【多选题】
下列关于钢轨肥边说法正确的有___？
A. 超过1mm的肥边都需要打磨
B. 肥边不影响钢轨使用寿命，说以不属于病害
C. 肥边只有接头才会发生
D. 肥边会影响行车安全，所以要及时消除
【多选题】
关于曲线外轨超高设置的目的，叙述不正确的是___？
A. 保证轨道稳定，防止车辆倾覆
B. 为了线路美观，看起来有层次感
C. 为了体现线路的复杂性，提高技术水准
D. 将离心力限制在一定范围内，保证旅客的舒适度
【多选题】
下列作业中，需要使用丁字扳手的___？
A. 线路步行巡视
B. 更换铁垫板
C. 正线高低病害整改
D. 钢轨磨耗测量
【多选题】
施工计划按时间分类,其中正确的有___？
A. 周计划
B. 月计划
C. 补充计划
D. 年计划
【多选题】
下列属于施工联络人的职责有___？
A. 负责作业人员、设备的管理
B. 办理请、销点手续
C. 作业安全防护措施的落实或确认
D. 出清作业区域、设备状态恢复正常的确认
【多选题】
如多个A2类施工需要在同一地段作业时，关于红闪灯设置说法错误的___？
A. 相邻两个红闪灯之间至少有0.3米以上的距离
B. 相邻两个红闪灯之间至少有0.5米以上的距离
C. 相邻两个红闪灯之间至少有0.8米以上的距离
D. 相邻两个红闪灯之间至少有1米以上的距离
【多选题】
如果因故需要延长作业时间，施工负责人需提前经主站向行调申请，由值班主任进行批准，关于提前时间说法错误的___？
A. 需在作业结束时间前30分钟申请延点
B. 需在作业结束时间前20分钟申请延点
C. 需在作业结束时间前10分钟申请延点
D. 需在作业结束时间前5分钟申请延点
【多选题】
下列施工作业，不需要申请B2点的是哪几项？___
A. 正线步行巡视
B. 停车场倒运石砟
C. 停车场道岔检查
D. 使用工程车调运备轨
【多选题】
下列施工作业，不需要申请B3点的是哪几项？___
A. 正线步行巡视
B. 工程车倒运石砟
C. 停车场道岔检查
D. 使用工程车调运备轨
【多选题】
轨道几何尺寸是指?___
A. 轨道的几何形状
B. 相对位置
C. 基本尺寸
D. 水平高差
【多选题】
轨道几何尺寸的正确与否，对___方面有影响？
A. 机车车辆的安全运行
B. 乘客的旅行舒适度
C. 设备的使用寿命
D. 养护费用
【多选题】
线路平面由什么组成？___
A. 直线
B. 曲线
C. 道岔
D. 联结零件
【多选题】
轨距分为哪几种？___
A. 标准轨距
B. 宽轨距
C. 窄轨距
D. 加宽轨距
【多选题】
轨道高低不平顺有___因素造成？
A. 路基沉陷
B. 捣固不良
C. 扣件松动
D. 钢轨磨耗
【多选题】
曲线基本要素包括___？
A. 曲线半径，用R表示（即圆曲线半径）
B. 曲线全长，用L表示
C. 缓和曲线长，用Ls表示
D. 曲中点，用QZ表示
【多选题】
50kg/m钢轨7号单开道岔轨距垫分为哪几种？___
A. 中间轨距垫
B. 接头轨距垫
C. A型轨距垫
D. B型轨距垫
【多选题】
道岔巡检时应注意___？
A. 道岔、护轨及主要联结零件有无松动、缺损
B. 尖轨和基本轨是否密贴
C. 道岔爬行量是否超标
D. 已有标志的伤损钢轨有无发展
【多选题】
钢轨检查时应注意___？
A. 全面检测钢轨、尖轨、辙叉是否伤损或达更换条件
B. 接头是否出现连续瞎缝或超过构造轨缝
C. 接头或钢轨是否出现擦伤掉块
D. 绝缘接头轨端是否存在肥边
【多选题】
岔枕检查时应注意___？
A. 碎石岔枕是否存在位置、间距误差或偏斜
B. 接头岔枕失效或其它零星失效及连续失效的检查
C. 整体道床短岔枕是否出现裂缝、松动和剥离
D. 碎石岔枕是否空吊板及暗坑
【多选题】
联结零件检查时应注意___？
A. 连杆、顶铁、间隔铁螺栓是否松动
B. 铁垫板、胶垫失效、折断、缺少
C. 其他各种螺栓缺少、松动
D. 弹条扣件中部前端是否离缝或扭矩超出规定范围的
【多选题】
砕石道床应满足___要求
A. 道砟饱满
B. 道砟均匀整齐
C. 道床无杂草
D. 道床无灰尘
【多选题】
以下满足道岔辙叉部分查照间隔要求的是___
A. 1391mm
B. 1392mm
C. 1393mm
D. 1394mm
【多选题】
以下满足道岔辙叉部分护背距离要求的是___
A. 1346mm
B. 1347mm
C. 1348mm
D. 1349mm
【多选题】
关于辙叉护轨平直段轮缘槽检查时标准宽度，以下说法错误的是___
A. 48mm
B. 46mm
C. 44mm
D. 42mm
【多选题】
钢轨伤损分为哪几种___
A. 轻伤
B. 重伤
C. 折断
D. 剥落掉块
【多选题】
辙叉伤损分为哪几种___
A. 轻伤
B. 重伤
C. 折断
D. 剥落掉块
【多选题】
道岔综合维修基本内容有___
A. 改道、拨道、调整道岔各部尺寸，全面拨正道岔
B. 更换、方正和修理岔枕
C. 整修、更换和补充联结零件，并有计划地涂油
D. 整修路肩，疏通排水设备，清除道床杂草和路肩大草
【多选题】
道岔经常保养基本内容有___
A. 处理道床翻浆冒泥，均匀道砟和整理道床
B. 更换和修理岔枕
C. 调整轨缝，锁定线路
D. 对滑床板（含滚轴）定期进行清洁和涂油
【多选题】
道岔临时补修的主要内容有___
A. 调整严重不良轨缝
B. 疏通严重淤塞的排水设备，处理严重冲刷的路肩和道床
C. 整修和补充缺失损坏的道岔联结零件
D. 垫入或撤出损坏垫板、胶垫
【多选题】
钢轨的主要作用有___
A. 引导机车车辆行驶
B. 将所承受的荷载传布于轨枕、道床及路基
C. 为车轮的滚动提供阻力最小的接触面
D. 提高行车速度
【多选题】
轨枕按材质分为___种类
A. 木枕
B. 混凝土枕
C. 长枕
D. 岔枕
【多选题】
联结零件的主要作用有___
A. 有效地保证钢轨与钢轨或钢轨与轨枕间的可靠联结
B. 尽可能地保持钢轨的连续性与整体性
C. 阻止钢轨相对于轨枕的纵横向位移，确保轨距正常
D. 在机车车辆的动力作用下，充分发挥缓冲减振性能，延缓线路残余变形的积累
【多选题】
车轮作用在钢轨上的力有___
A. 垂直力
B. 横向水平力
C. 纵向水平力
D. 离心力
【多选题】
钢轨应满足___性能需求
A. 足够的强度
B. 足够的韧性
C. 耐磨性能
D. 耐高温性能
【多选题】
钢轨的断裂和破损多数发生于___部位
A. 有缺陷的轨头
B. 轨头与轨腰连接处
C. 螺栓孔周围
D. 轨底
【多选题】
以下轨高与轨底宽比例正确的是___
A. 1.15
B. 1.16
C. 1.17
D. 1.3
【多选题】
杭州地铁采用的钢轨类型有___
A. P75
B. P60
C. P50
D. P43
【多选题】
我国钢轨的标准长度有___
A. 12.5m
B. 25m
C. 36m
D. 48m
【多选题】
钢轨接头联结零件包括___
A. 夹板
B. 螺栓
C. 螺母
D. 弹簧垫圈
