【判断题】
所有的紫色酒精，在 1 米内不准点有明火，不准放在暖气片上
查看试卷，进入试卷练习
微信扫一扫，开始刷题
相关试题
【判断题】
固定式装配适用于单件和小批量模具的装配，以及装配精度要求较高，需要调整的部位较多的装配
【判断题】
我国对企业发生的事故，坚持“四不放过”原则进行处理
【判断题】
在机械设备中，凸轮表面误差将会引起扭转振动
【单选题】
What happens to the status of users already logged into ESXi Shell when a vSphere administrator enables lockdown mode?___
A. Users remain logged in and can run commands, except to disable lockdown mode.
B. Users remain logged in and can run commands, including disabling lockdown mode.
C. Users are immediately logged out of ESXi Shell.
D. Users are logged out after a timeout specified by the vSphere administrator.
【单选题】
What is the effective vSphere licensing level during the 60 day evaluation period?___
A. vSphere Foundation Essentials Plus
B. vSphere Standard
C. vSphere Enterprise
D. vSphere
E. nterprise Plus
【单选题】
To comply with security requirements, an administrator with a vCenter Server Appliance needs to force logoff of the vSphere web client after 10 minutes of inactivity.What should the administrator do to meet the requirement?___
A. Edit: /var/lib/vmware/vsphere-client/webclient.properties, modify session.timeout=10
B. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=600
C. Edit: /var/lib/vmware/vsphere-client/webclient.properties modify session.timeout=600
D. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=10
【单选题】
An administrator enables High Availability (HA) on a Virtual SAN cluster.Which network is used for HA Network Heatbeat configuration?___
A. The Management network.
B. The vMotion network.
C. The Virtual SAN network.
D. The Provisioning Traffic network.
【单选题】
A user wants to monitor a business-critical virtual machine to ensure that it doesn't run out of resources. What metric could be monitored in vRealize Operations to address this concern?___
A. Time Remaining badge
B. Compliance badge
C. Reclaimable Waste badge
D. Density badge
【单选题】
An administrator has recently installed a new ESXi 6.x Host, and during the configuration notices sporadic network problems. To check whether the issue occurred sometime during the configuration, the administrator would like to reset the system.How can this be accomplished in the shortest amount of time?___
A. Run the ESXi installer again and reinstall the host.
B. Select the Reset System Configuration option from the vSphere Client when connected directly to the host.
C. From the
D. irect Console User Interface, select Reset System Configuration.
【单选题】
A vApp is running out of compute resources when overall activity is high within the resource pool. At other times, everything is fine.What should be done to resolve this issue?___
A. Increase the size of the resource pool Shares.
B. Set the vApp's CPU and Memory Reservation Type to Expandable.
C. Set the vApp's CPU and Memory Limit to Unlimited.
D. Create a new resource pool with the existing hardware configuration.
【单选题】
A virtual machine has been renamed and an administrator is unable to find files with the new virtual machine name in the datastore.What is the reason for this?___
A. The names of the files on the datastore do not change.
B. The names of the files on the datastore have been corrupted.
C. The virtual machine needs to be re-added to the inventory.
D. The Distributed Resource Scheduler moved the virtual machine to another host.
【单选题】
An administrator has configured network connectivity for a new virtual machine, as shown in the Exhibit.What will occur with the network traffic of this virtual machine when communicating externally from vSwitch1?___
A. The virtual machine will communicate on both uplinks
B. The virtual machine will only communicate on vmnic1
C. The virtual machine will only communicate on vmnic2
D. The virtual machine will fail to communicate externally
【单选题】
An administrator is unable to create the first group in a new vRealize Operations environment. What is the likely cause of the problem?___
A. There are no group types defined.
B. The group is not defined in SSO.
C. There are more than 32 group types defined.
D. The description for the group is not provided.
【单选题】
A new vApp was built and tested in the corporate headquarters datacenter running vSphere 6.x. What condition would explain why the virtual machine is failing to boot in an offsite datacenter running on vSphere 5.5?___
A. The virtual machine was built with the default hardware version.
B. The VMFS 5 datastore is not compatible with virtual machines configured with vSphere 6.x.
C. a
D. RS 5.5 cluster cannot run virtual machines configured with vSphere 6.x.
【单选题】
An administrator is evaluating whether to deploy vCenter Server on a Windows server or on a vCenter Server appliance. The administrator has the following requirements: <A web browser will be utilized to manage the vSphere environment.> <16 ESXi hosts will be deployed.> <Licenses must be shared with a vCenter Server at another site.> <An external Oracle 10g database server will be used to host the vCenter Server database.> Why will the administrator need to deploy vCenter Server on a Windows server?___
A. Linked Mode is a requirement for the solution.
B. Oracle 10g is a requirement for the solution.
C. The vSphere web client is a requirement for the solution.
D. Management of more than 5 hosts is a requirement for the solution.
【单选题】
What is a benefit of using VMware Data Protection ?___
A. Provides support for guest-level backups and restores of Microsoft SQL Servers, Exchange Servers, and Share Point Servers.
B. Provides support for advanced storage services including replication, encryption, deduplication, and compression.
C. Provides direct access to VDP configuration integrated into the vSphere Client.
D. Reduces disk space consumed by virtual machine data using deduplication.
【单选题】
An administrator enables vSphere High Availability (HA) on an existing cluster with a large number of hosts and virtual machines. The administrator notices that the setup of vSphere HA on some of the hosts is failing. What step, if taken, might resolve this issue?___
A. Increase the value of the config.vpxd.das.electionWaitTimeSec setting.
B. Set the value of vpxd.das.aamMemoryLimit to 256.
C. Set the value of the das.useDefaultIsolationAddress setting to False.
D. Increase the value of the das.iostatsinterval setting.
【单选题】
An ESXi 6.x host consists of 24 logical cores. Hyperthreading is enabled on the host. What is the maximum number of vCPUs that can be assigned to a virtual machine on this host?___
【单选题】
By default, each ESXi 6.x host is provisioned with a certificate from which root certificate authority?___
A. RedHat Certificate Authority
B. VMware Certificate Authority
C. DigiCert Certificate Authority
D. Verisign Certificate Authority
【单选题】
An administrator is adding an NFS datastore as shown in the Exhibit. What is the purpose of the Servers to be added list?___
A. It contains the IP addresses of the NFS Storage Server to provide multipathing capability.
B. It contains the IP addresses of the ESXi hosts that mount the datastore.
C. It contains the IP addresses used for
D. ynamic Discovery of targets.
【单选题】
An administrator reports that the System Event log data is only available for 24 hours when reviewing the Hardware Status tab. Which condition could be responsible for the loss of data?___
A. A Reset event log was executed.
B. The statistical collection level was set to a value of 1.
C. The boot disk of the host is corrupt.
D. Syslog has been configured at the vCenter Server level.
【单选题】
During an upgrade, the ESXi 6.x installer finds an existing version of ESXi and a VMFS3 volume. No virtual machines exist on the host or VMFS3 volume. The requirement is to upgrade to VMFS5. Which option should be chosen to meet this requirement?___
A. Upgrade ESXi and preserve the VMFS datastore
B. Install ESXi and preserve the VMFS datastore
C. Install ESXi and overwrite the VMFS datastore
D. Upgrade
E. SXi and overwrite the VMFS datastore
【单选题】
A vSphere 6.x Standard Switch is configured with 4 virtual machine portgroups, as shown in the exhibit. Which portgroup would be utilized by default when creating a new virtual machine?___
A. Access Network
B. DMZ Network
C. VM Network
D. Virtual Machine Network
【单选题】
Which vSphere 6.x feature will allow an organization to utilize native snapshots?___
A. Virtual Volumes
B. Virtual SAN
C. VMFS3
D. VMFS5
【单选题】
An administrator is creating a new vSphere Distributed Switch that will be utilized with a specific vSphere Cluster. The cluster itself contains a mix of ESXi 5.x and 6.x Hosts. Which Distributed Switch version should be created to support this configuration?___
A. Distributed Switch: 6.0.0
B. Distributed Switch: 5.0.0
C. Distributed Switch: 5.1.0
D. Distributed Switch: 5.5.0
【单选题】
Which load balancing policy, previously limited to vSphere Distributed Switches, is now available on vSphere Standard Switches with vSphere 6.x?___
A. Route based on physical NIC workload
B. Route based on IP Hash
C. Route based on the originating virtual port
D. Route based on Source MAC Hash
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
An administrator has just completed performing an interactive installation of ESXi 6.x and is booting the host. How is the network initially configured?___
A. The network is configured by Automatic Private IP Addressing (APIPA).
B. The network is configured based on the settings detected in DNS.
C. The network is configured with the address as specified in the installer.
D. The network is automatically configured by DHCP.
【单选题】
You have just installed an ESXi 6.x Host. As part of your company security regulations, a security banner must be presented on the console of the host. How can this action be accomplished?___
A. Configure the Advanced Settings > Annotations screen of the ESXi host.
B. This is configured from the Direct Console User Interface configuration menu.
C. It is not possible to configure a security banner for the ESXi host.
D. From vCenter Server, this setting is configured globally in the vCenter Server configuration.
【单选题】
An administrator is only able to see the Health Badge when using the vRealize Operations user interface. What is the likely cause of this behavior?___
A. The vRealize Operations Foundation License is in use.
B. The vmware-sps service failed to start.
C. The vRealize Operations Standard License is in use.
D. The vmware-rbd-watchdog service failed to start.
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets either of these conditions: <High virtual CPU> <High active memory consumption.> <The alarm is only triggering when both of the conditions are met.> What can be done to correct the alarm behavior?___
A. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory and link them together with ESXCLI.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is attempting to restore a number of files in a directory within the Operating System of a virtual machine. How can the administrator restore the files from a previous backup? ___
A. Use the File Level Restore option from the selected backup of the virtual machine in the vSphere Web Client.
B. Connect to the File Level Restore tool from a web browser in the virtual machine.
C. Connect to the File Level Restore tool from the VMware
D. ata Protection appliance.
【单选题】
After selecting an object in vRealize Operations, how can a user compare the badge values of related child objects? ___
A. Use the Scoreboard tab
B. Use the Relationship tab
C. Use the Members tab
D. Use the Overview tab
【单选题】
You want to deploy a vApp and dynamically assign IP addresses without a DHCP server on the network. Which action would you take to accomplish this task? ___
A. Enable IP pools.
B. Configure a local DHCP server in the vApp.
C. Enable NAT on the vApp router.
D. Configure the guest OS for workgroup and WINS.
【单选题】
What is the optimal configuration when building a virtual machine for a single-threaded Windows application? ___
A. Deploy single-threaded applications on uniprocessor virtual machines.
B. Deploy single-threaded applications on symmetric multi-processor virtual machines.
C. Tune single-threaded applications to take advantage of symmetric multi-processor resources.
D. Tune Single-threaded applications at the hypervisor level.
【单选题】
An administrator has created the resource pool configuration shown in the Exhibit. Based on the exhibit, which virtual machine(s) can be successfully powered on? ___
A. VM-M1 only
B. VM-K1 only
C. VM-K1 and VM-K2 only
D. VM-K1, VM-K2, and VM-M1
【单选题】
Which vSphere 6 Enterprise Edition feature will allow an organization to ensure that critical multi-threaded applications have the maximum possible uptime? ___
A. Fault Tolerance
B. High Availability
C. Distributed Resource Scheduler
D. App HA
推荐试题
【单选题】
电线变网线，插座变网口是哪种组网技术的产品特点（ ）。___
A. PoE
B. PLC电力猫
C. EoC
D. 无线AP
E.
【单选题】
工作区安装在墙面上的信息插座，一般要求距离地面（ ）cm以上。___
A. 20
B. 30
C. 40
D. 50
E.
【单选题】
监控摄像头的无线网络接入方式为（ ）。___
A. WiFi
B. ZigBee
C. 蓝牙
D. NFC
E.
【单选题】
扩展型AP（胖AP）相当于带有无线覆盖功能的（ ），它主要应用于用户上网和无线覆盖。___
A. modem
B. 路由器
C. 中继器
D. 网桥设备
E.
【单选题】
用户端光终端盒宜安装固定在墙壁上，盒底边距地坪（ ）为宜。___
A. 0.5m
B. 0.4m
C. 0.3m
D. 0.2m
E.
【单选题】
在确定了光缆的路由走向后，沿光缆路由，在墙面上安装螺钉扣螺钉扣用Φ6mm膨胀管及螺丝钉固定两个螺钉扣之间的间距为（ ）。___
A. 20cm
B. 40cm
C. 60cm
D. 80cm
E.
【单选题】
（ ）是线槽末端处使用，起保护光缆的作用。___
A. 阴角
B. 弯角
C. 收尾线槽
D. 线槽软管
E.
【单选题】
19寸标准机柜内设备安装所占高度用一个特殊单位U表示，1U=（ ）mm。___
A. 44.45
B. 45
C. 6
D. 80
E.
【单选题】
安装监控时，如需开孔洞，需从室内向室外开孔，向下倾斜（ ）度开孔。___
A. 8
B. 10
C. 15
D. 20
E.
【单选题】
蝶形引入光缆一般不适宜直接在（ ）管道中敷设。___
A. 地上
B. 地下
C. 空中
D. 水里
E.
【单选题】
关于 PoE供电技术，下列说法中正确的是（ ）。___
A. POE交换机连接POE受电设备时，通常都是按交换机的最大输出功率给设备供电的
B. POE供电器和分离器是通过网线的4578 口供电的
C. POE交换机可以跨设备连接AP面板为其供电
D. POE交换机可以通过网线的1236 口同时实现供电和传输数据信号
E.
【单选题】
光缆施工中，光缆的弯曲半径不得小于其外径的（ ）倍。___
A. 10
B. 15
C. 20
D. 25
E.
【单选题】
光纤冷接子基本技术参数中，插入最耗要求（ ）。___
A. < 0.08dB
B. < 0.1dB
C. < 0.l5dB
D. < 0.5dB
E.
【单选题】
金属槽和PVC塑料槽每根槽一般长度为（ ）米。___
【单选题】
每个用户单元信息配线箱附近水平70mm～150mm处，宜预留设置（ ）个单相交流220V／10A电源插座___
【单选题】
每一处自承式光缆的开剥点与S型固定件间预留（ ），施工完毕后，开剥点处用绝缘胶带缠绕6圈，避免自承式光缆加强芯与纤芯脱离。___
A. 10~15cm
B. 5~10cm
C. 15~20cm
D. 20~25cm
E.
【单选题】
如桥架内无空间安装波纹管，则应采用（ ）对敷设在内的蝶形引入光缆进行包扎，以起到对光缆的保护作用。___
A. 过路盒
B. 缠绕管
C. 入户暗管
D. 防水胶布
E.
【单选题】
一般情况下，蝶形引入光缆敷设时的牵引力不宜超过光缆允许张力的 （ ）；瞬间最大牵引力不得超过光缆允许张力的100%，且主要牵引力应加在光缆的加强构件上。___
A. 1
B. 0.8
C. 0.6
D. 0.4
E.
【单选题】
应使用光缆盘携带蝶形引入光缆，并在敷设光缆时使用（ ），使光缆盘能自动转动，以防止光缆被缠绕。___
A. 放缆托架
B. 绞线盘
C. 支撑架
D. 光纤保护器
E.
【单选题】
在家庭网络布线中，如需开槽，墙角线槽离墙体的最小间距为（ ）。___
A. 15cm
B. 20cm
C. 30cm
D. 50cm
E.
【单选题】
在室内采用直接敲击的钉固方式敷设蝶形引入光缆时应使用（ ）。___
A. 螺钉扣
B. 卡钉扣
C. 波纹管
D. 光缆固定槽
E.
【单选题】
在网络互联设备中，不仅能用来互联同构型网络，而且还能连接LAN与WAN的是( )。___
A. 网关
B. 中继器
C. 路由器
D. 桥接器
E.
【单选题】
在用户垂直竖井内的弱电布线架内敷设Φ30mm波纹管，波纹管使用小型扣带固定。固定间距为（ ）。___
A. 30cm
B. 40cm
C. 50cm
D. 60cm
E.
【单选题】
在智能照明控制系统中，为了实现定时开关电器/节能的效果，应选用的智能家居设备为（ ）。___
A. 人体传感器
B. 智能灯座
C. 智能灯泡
D. 无线开关
E.
【单选题】
杆路敷设蝶形引入光缆，根据入户光缆的（ ），沿光缆的入户方向，在空旷处将自承式蝶形引入光缆倒盘。___
A. 选用材料
B. 入户方式
C. 路由走向
D. 路由长度
E.
【单选题】
综合布线器材与布线工具中，穿线器属于（ ）。___
A. 布线器材
B. 管槽安装工具
C. 线缆安装工具
D. 测试工具
E.
【单选题】
TP-LINK路由器登录后台管理的有效地址是（ ）。___
A. tpadmin.cn
B. tpadmin.com
C. tplogin.cn
D. tplogin.com
E.
【单选题】
TP-LINK无线桥接后，从路由的后台登录地址将自动变更，可输入（ ）连接到从路由进行进一步配置。___
A. tplogin.cn
B. 192.168.0.1
C. 192.168.1.1
D. 192.168.2.1
E.
【单选题】
安装光纤面板插座时，接口朝向不可以是（ ）。___
A. 朝上
B. 朝下
C. 朝左
D. 朝右
E.
【单选题】
采用多路由器组网的时候，通常主路由器通过（ ）口跟副路由器相连。___
A. WAM
B. USB
C. USB-C
D. LAN
E.
【单选题】
蝶形引入光缆采用墙面开孔方式入户：开孔标准为自用户室内往用户室外进行开孔，开孔方向是向下倾斜( )度角，防止雨水倒灌至用户室内。___
A. 10
B. 20
C. 30
D. 40
E.
【单选题】
光纤熔接技术又叫做（ ）。___
A. 热熔技术
B. 冷溶技术
C. 机械拼接技术
D. 抛光加箍技术
E.
【单选题】
光终端盒接口的朝向根据现场请朝左，朝右，朝下三个方向，不能（）___
A. 朝左
B. 朝右
C. 朝下
D. 朝上
E.
【单选题】
选用螺钉固定方式时，应根据线槽及其配件上标注的螺钉固定位置，将线槽及其配件固定在墙面上，一般1米直线槽需用（ ）螺钉进行固定。___
A. 1个
B. 2个
C. 3个
D. 4个
E.
【单选题】
以下用户引入线线间接头质量的描述（ ）句是错误的？___
A. 布线长度在50m以内不可有接头
B. 长度在100m内，只允许有一个接头
C. 最长用户引入线不超过200m
D. 同一条用户引入线线径可以不一致
E.
【单选题】
在光缆敷设过程中，应避免光纤被（ ）和踩踏。___
A. 缠绕
B. 扭转
C. 损伤
D. 弯曲
E.
【单选题】
在综合布线系统施工中，通常情况下语音信息点采用CAT3，数据信息点采用（ ）。___
A. CAT1
B. CAT3
C. CAT5E
D. CAT7
E.
【单选题】
住宅小区暗管弯曲敷设时，其路由长度应小于（ ），且该段内不得有S弯，弯曲如超过（ ）时，应加装过路盒___
A. 18m，4次
B. 16m，3次
C. 15m，2次
D. 10m，1次
E.
【单选题】
引入光缆应在用户设备终端处余留适当长度以便用户使用，不可过长，（ ）米为宜，且必须规范绑扎并向用户强调光纤的维护要求和注意事项___
A. 1~3
B. 3~5
C. 5~7
D. 6~8
E.
【单选题】
用户家中网线余量应尽量短、不超过（ ）米为宜，且禁止出现环绕、缠绕现象___
