刷题
导入试题
【单选题】
An administrator is creating a new vSphere Distributed Switch that will be utilized with a specific vSphere Cluster. The cluster itself contains a mix of ESXi 5.x and 6.x Hosts. Which Distributed Switch version should be created to support this configuration?___
A. Distributed Switch: 6.0.0
B. Distributed Switch: 5.0.0
C. Distributed Switch: 5.1.0
D. Distributed Switch: 5.5.0
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
B
解析
暂无解析
相关试题
【单选题】
Which load balancing policy, previously limited to vSphere Distributed Switches, is now available on vSphere Standard Switches with vSphere 6.x?___
A. Route based on physical NIC workload
B. Route based on IP Hash
C. Route based on the originating virtual port
D. Route based on Source MAC Hash
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
An administrator has just completed performing an interactive installation of ESXi 6.x and is booting the host. How is the network initially configured?___
A. The network is configured by Automatic Private IP Addressing (APIPA).
B. The network is configured based on the settings detected in DNS.
C. The network is configured with the address as specified in the installer.
D. The network is automatically configured by DHCP.
【单选题】
You have just installed an ESXi 6.x Host. As part of your company security regulations, a security banner must be presented on the console of the host. How can this action be accomplished?___
A. Configure the Advanced Settings > Annotations screen of the ESXi host.
B. This is configured from the Direct Console User Interface configuration menu.
C. It is not possible to configure a security banner for the ESXi host.
D. From vCenter Server, this setting is configured globally in the vCenter Server configuration.
【单选题】
An administrator is only able to see the Health Badge when using the vRealize Operations user interface. What is the likely cause of this behavior?___
A. The vRealize Operations Foundation License is in use.
B. The vmware-sps service failed to start.
C. The vRealize Operations Standard License is in use.
D. The vmware-rbd-watchdog service failed to start.
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets either of these conditions: <High virtual CPU> <High active memory consumption.> <The alarm is only triggering when both of the conditions are met.> What can be done to correct the alarm behavior?___
A. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory and link them together with ESXCLI.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is attempting to restore a number of files in a directory within the Operating System of a virtual machine. How can the administrator restore the files from a previous backup? ___
A. Use the File Level Restore option from the selected backup of the virtual machine in the vSphere Web Client.
B. Connect to the File Level Restore tool from a web browser in the virtual machine.
C. Connect to the File Level Restore tool from the VMware
D. ata Protection appliance.
【单选题】
After selecting an object in vRealize Operations, how can a user compare the badge values of related child objects? ___
A. Use the Scoreboard tab
B. Use the Relationship tab
C. Use the Members tab
D. Use the Overview tab
【单选题】
You want to deploy a vApp and dynamically assign IP addresses without a DHCP server on the network. Which action would you take to accomplish this task? ___
A. Enable IP pools.
B. Configure a local DHCP server in the vApp.
C. Enable NAT on the vApp router.
D. Configure the guest OS for workgroup and WINS.
【单选题】
What is the optimal configuration when building a virtual machine for a single-threaded Windows application? ___
A. Deploy single-threaded applications on uniprocessor virtual machines.
B. Deploy single-threaded applications on symmetric multi-processor virtual machines.
C. Tune single-threaded applications to take advantage of symmetric multi-processor resources.
D. Tune Single-threaded applications at the hypervisor level.
【单选题】
An administrator has created the resource pool configuration shown in the Exhibit. Based on the exhibit, which virtual machine(s) can be successfully powered on? ___
A. VM-M1 only
B. VM-K1 only
C. VM-K1 and VM-K2 only
D. VM-K1, VM-K2, and VM-M1
【单选题】
Which vSphere 6 Enterprise Edition feature will allow an organization to ensure that critical multi-threaded applications have the maximum possible uptime? ___
A. Fault Tolerance
B. High Availability
C. Distributed Resource Scheduler
D. App HA
【单选题】
An administrator has a virtual machine that requires four times the compute resources than other virtual machines on the same ESXi 6.x host. How should the administrator configure the virtual machine settings, in order to be prepared for any resource contention? ___
A. Set the shares of the priority virtual machine to High and the rest to Low.
B. Set the shares of the priority virtual machine to High.
C. Set the shares of the priority virtual machine to High and the rest to Normal.
D. Set the shares of the priority virtual machine to Normal and the rest to Low.
【单选题】
Which type of Adapter does not require vmkernel networking? ___
A. Independent Hardware iSCSI Adapter
B. Dependent Hardware iSCSI Adapter
C. Software iSCSI Adapter
D. Software FCoE Adapter
【单选题】
During the installation of ESXi 6.0, the following error message is reported: Hardware Virtualization is not a feature of the CPU, or is not enabled in the BIOS. Which condition would generate this message? ___
A. LAHF/SAHF is not enabled in the BIOS.
B. NX/XD is not enabled in the BIOS.
C. SSE3 is not enabled in the BIOS.
D. Hyperthreading is not enabled in the BIOS.
【单选题】
An administrator is unable to login to vCenter Server when using the vSphere web client. The administrator successfully accessed vCenter Server using the client earlier the same day. What is the most appropriate first step the administrator should take to resolve this issue? ___
A. Verify the web browser being used has Adobe Flash plugin version 11.5 or later
B. Verify the vCenter Single Sign-On service is running on the vCenter Server
C. Verify the vSphere Web Server service is running on the vCenter Server
D. Verify the administrator has permissions configured in vCenter Server
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets two conditions: <high virtual CPU> <high active memory consumption> The alarm is malfunctioning and triggering when either condition is met instead of both. What can be done to correct the issue? ___
A. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
What must be enabled to ensure that VM Component Protection (VMCP) works in a High Availability cluster? ___
A. VMware Tools Virtual Machine Communication Interface (VMCI)
B. Fault Tolerance
C. Atomic Test and Set (ATS)
D. All Paths Down (APD) Timeout
【单选题】
An administrator wants to add a web server to an existing multi-tier application consisting of three virtual machines: <A web server> <A database server An application server> The web server should be added to the application when the primary web server reaches: <70% vCPU utilization> <55% active memory> Which option will achieve this result? ___
A. Create a virtual machine alarm with an action to run a script that starts a new instance of the web server.
B. Create a host cpu and memory alarm with an action to run a script that starts a new instance of the webserver.
C. Configure HA application monitoring for the web server and set it to trigger deployment of a new instance of the web server.
D. Configure Fault Tolerance on the virtual machine and leave the secondary machine disabled until needed.
【单选题】
An administrator has an application that requires connection directly to PCI devices through a virtual machine. What is a limitation of this configuration? ___
A. Devices must be reserved for PCI passthrough on at least one host on which the virtual machine will run.
B. Snapshots are not supported with DirectPath I/O passthrough devices.
C. A maximum of 18 PCI vSphere
D. irectPath devices can be added to a virtual machine.
【单选题】
The vSphere administrator is configuring directory services for an ESXi host: What should the vSphere administrator do to configure the host to use CAM services? ___
A. Check the Use vSphere Authentication Proxy checkbox.
B. Set Select Directory Service Type to CAM services.
C. Specify CAM$ for the
D. omain.
【单选题】
Which statement is true regarding the licensing of vCenter Server? ___
A. The license for vCenter Server must be provided at the time of installation.
B. Changing the license assigned to vCenter Server requires a restart of the vCenter Server service.
C. Virtual machines can still be powered on if the vCenter Server license expires.
D. Licensing for a single vCenter Server installation is determined by the number of managed virtual machines.
【单选题】
When configuring vSphere Replication for a virtual machine, what is the lowest Recovery Point Objective (RPO) that can be selected? ___
A. 1 min
B. 5 min
C. 10 min
D. 15min
【单选题】
A developer needs to create a multi-tier development stack for a home lab. Which vSphere product will support the architecture required for the least software cost? ___
A. vSphere Hypervisor
B. vSphere Essentials
C. VMware Player
D. VMware Workstation
【单选题】
An administrator is installing Windows into a virtual machine. The DVD has been mounted on the Host and configured for the virtual machine as shown in the Exhibit. Based on the exhibit, when the virtual machine is booted, why would it attempt to search for a PXE server? ___
A. The CD/DVD device is not connected.
B. The ISO is in the incorrect storage location.
C. The OS minimum requirements have not been met.
D. The CD/DVD device is not set to Client Device.
【单选题】
What component must be installed prior to deploying a vCenter Server in vSphere 6.x? ___
A. vCenter Identity Services
B. Platform Services Controller
C. vCenter Single Sign-On
D. Client Integration Plug-In
【单选题】
What is a valid plug-in status for a plug-in that has been added to a vSphere client? ___
A. Disabled
B. Unknown
C. Stopped
D. Installed
【单选题】
Users of an application are reporting performance issues. The following performance values are observed in the vSphere Web Client: <Host CPU utilization is 90%> <Virtual Machine memory utilization is consistently greater than 90% CPU Ready values are higher than 20%> What could be the cause of the application performance issue? ___
A. The host is lacking the CPU resources required to meet the demand.
B. The host is lacking the memory resources required to meet the demand.
C. The virtual machine is lacking the CPU resources required to meet the demand.
D. The virtual machine is lacking the memory resources required to meet the demand.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is re-provisioning an ESXi host and moving it to another datacenter. Which DCUI option should the administrator use to revert the system configuration to the default settings? ___
A. Reset System Configuration
B. Rebuild Default System Configuration
C. Revert System Configuration
D. Renew Default System Configuration
【单选题】
An administrator has just completed installing an ESXi 6.x host, but doesn't know what address has been configured. Where is the ESXi host IP address configured? ___
A. RVC console
B. Direct Console User Interface
C. vSphere Web Client
D. vSphere Client
【单选题】
When is it possible to place a VMFS5 datastore in maintenance mode? ___
A. When it is a member of a Storage DRS cluster
B. When it is a member of Virtual SAN cluster
C. When it is a member of a multi-extent datastore
D. When it is a member of a Virtual Volume
【单选题】
Immediately after installing ESXi, an administrator observes that the Configure Lockdown Mode option is grayed out in the Direct Console User Interface (DCUI). What is the most likely explanation? ___
A. The host has not yet been added to a vCenter Server.
B. The BIOS on the host does not have NX/XD enabled.
C. The ESXi host is running in evaluation mode.
D. The host requires a reboot before this feature is available.
【单选题】
Immediately after installing ESXi, an administrator observes that the Configure Lockdown Mode option is grayed out in the Direct Console User Interface (DCUI). What is the most likely explanation? ___
A. The host has not yet been added to a vCenter Server.
B. The BIOS on the host does not have NX/XD enabled.
C. The ESXi host is running in evaluation mode.
D. The host requires a reboot before this feature is available.
【单选题】
Which Single Sign-On deployment mode should an administrator use for two 6.x vCenter Servers configured with linked mode? ___
A. Basic Single Sign-On with vCenter Server Heartbeat
B. Multisite Single Sign-On
C. Basic Single Sign-On
D. Single Sign-On with Linked Mode
【单选题】
What is required when changing a virtual machine name using the vSphere Web Client? ___
A. Verify connectivity to the ESXi host where the virtual machine is running and its inventory list is accessible.
B. Verify in which datastore the virtual machine resides and that you have access and its inventory list is accessible.
C. Verify that virtual machine files are stored in the same datastore and can be accessed in the datastore browser list.
D. Verify the virtual machine is not running in Fault Tolerant mode and that it is not in a Distributed Resource Scheduler cluster.
【单选题】
An administrator deploys vRealize Operations into a vSphere 6.x environment. After the deployment, the administrator notices that badges are not appearing. What is a likely cause of this behavior? ___
A. Badges do not appear until you register vRealize Operations with vCenter Server.
B. Badges do not appear until you register a vCenter Server in vRealize Operations.
C. The vRealize Operations appliance needs to be redeployed.
D. The vCenter Server appliance needs to be redeployed.
【单选题】
How are ports scaled on vSphere Standard Switches (vSS)? ___
A. Ports on a vSS can be dynamically scaled up and down.
B. Ports on a vSS can only be statically scaled up or down.
C. Ports on a vSS can only be dynamically scaled down.
D. Ports on a vSS can only be dynamically scaled up.
推荐试题
【单选题】
减速地点标,设在需要减速地点的两端各___ m处。J454
A. 20
B. 30
C. 50
【单选题】
机车的鸣笛鸣示方式中,起动注意信号的鸣示方法为___。J461
A. 一长声
B. 二长声
C. 一长二短声
【单选题】
司机发现(或接到通知)邻线发生障碍,应向邻线上的列车发出___信号。J461
A. 警报
B. 呼唤
C. 紧急停车
【单选题】
机车的鸣笛鸣示方式中,紧急停车信号的鸣示方式为___。J461
A. 一长声
B. 连续短声
C. 一长三短声
【单选题】
在口笛号角鸣示方式中,停车信号为___。J462
A. 一长声
B. 二短一长声
C. 连续短声
【单选题】
机车挂车时,确认脱轨器、防护信号撤除后,显示连挂信号,以不超过___km/h的速度平稳连挂。C13
A. 5
B. 8
C. 10
【单选题】
制动机进行简略试验时,自阀减压___kPa并保压1min,检查制动主管贯通状态,司机检查制动主管漏泄量,每分钟不得超过20kPa。C15
A. 50
B. 100
C. 最大有效减压量
【单选题】
货物列车起动困难时,可适当压缩车钩,但不应超过总辆数的___。 C16
A. 三分之一
B. 三分之二
C. 二分之一
【单选题】
列车进入停车线施行制动停车时,追加减压一般不应超过___次;一次追加减压量,不得超过初次减压量。C28
A. 一
B. 两
C. 三
【单选题】
错误办理行车凭证发车或耽误列车事故的责任划分:司机起动列车,定___单位责任。事58
A. 车务
B. 机务
C. 车务、机务
【单选题】
应停车的客运列车错办通过,定车站责任;在区间乘降所错误通过,定___单位责任。事59
A. 车务
B. 机务
C. 车务、机务
【单选题】
总公司、铁路局行车安全监察人员,凭___登乘机车。运31
A. 登乘机车证
B. 工作证
C. 监察证
【单选题】
回送机车在一地滞留时间超过___小时(故障除外),所在局调度所要向总公司汇报滞留原因及解决措施。运75
A. 8
B. 12
C. 24
【单选题】
铁路机车车辆驾驶人员资格申请人隐瞒有关情况或提供虚假材料的,___年内不得再次申请。18号文第38条
A. 1
B. 2
C. 0.5
【单选题】
铁路机车车辆驾驶人员资格申请人在考试过程中有贿赂、舞弊行为的,取消考试资格,已经通过的考试科目成绩无效,且___内不得再次申请。18号文第39条
A. 1
B. 2
C. 0.5
【单选题】
铁路职工违反规章制度,致使发生铁路运营安全事故,造成严重后果的,处___年以下有期徒刑或者拘役。
A. 一
B. 二
C. 三
【单选题】
铁路职工玩忽职守、违反规章制度造成铁路运营事故的,___《铁路法》
A. 给予批评教育
B. 给予行政处分
C. 追究刑事责任
【单选题】
从业人员发现事故隐患或者其他不安全因素,应当___向现场安全生产管理人员或者本单位负责人报告;接到报告的人员应当及时予以处理。
A. 事后
B. 在作业的同时
C. 立即
【单选题】
铁路机车车辆的驾驶人员持过期或者失效驾驶证件执业的,由地区铁路监督管理局责令改正,可以处___元以下的罚款。 《条例》处罚办法》
A. 500
B. 1000
C. 2000
【单选题】
铁路机车车辆的驾驶人员持过期或者失效驾驶证件执业的,由___责令改正,可以处1000元以下的罚款。《条例》处罚办法
A. 地区铁路监督管理局
B. 总公司
C. 铁路局
【单选题】
申请人隐瞒有关情况或提供虚假材料的,___不得再次申请。 《驾驶人员资格许可》
A. 年度内
B. 1年内
C. 2年内
【单选题】
申请人在考试过程中有贿赂、舞弊行为的,取消考试资格,已经通过的考试科目成绩无效,且___不得再次申请。 《驾驶人员资格许可》
A. 年度内
B. 1年内
C. 2年内
【单选题】
工作人员滥用职权、玩忽职守,致使不符合条件的人员取得驾驶证的,应当撤销驾驶证,___不得再次申请驾驶证。 《驾驶人员资格许可》
A. 1年内
B. 2年内
C. 3年内
【单选题】
以欺骗、贿赂、倒卖、租借等不正当手段取得驾驶证的,应当撤销驾驶证,___不得再次申请驾驶证。《驾驶人员资格许可》
A. 1年内
B. 2年内
C. 3年内
【单选题】
在高速铁路运行区段,办理客运业务的车站,车站___应配备与司机通信联络用的无线对讲设备。GJ119
A. 站务员
B. 行李员
C. 客运值班员
【单选题】
在高速铁路运行区段,非集控站及转为车站控制的集控站,应向___报告有关行车工作。 GJ 209
A. 值守人员
B. 车站值班员
C. 列车调度员
【单选题】
在高速铁路运行区段,机车综合无线通信设备不能通话时,司机应___报告列车调度员(车站值班员)。GJ 381
A. 在前方站停车
B. 在前方停车站
C. 使用GSM-R手持终端
【单选题】
在高速铁路运行区段,司机在接到列车调度员已发布邻线列车限速___km/h及以下调度命令的口头指示后,通知车辆乘务员下车检查。 GJ 408
A. 160
B. 180
C. 200
【单选题】
使用机车救援动车组时,应进行制动试验,制动主管压力采用___ kPa。GJ 441
A. 500
B. 600
C. 800
【单选题】
生产经营单位的从业人员不服从管理,违反安全生产规章制度或者操作规程的,构成犯罪的,依照___有关规定追究刑事责任。 《安全生产法》
A. 铁路法
B. 铁路安全管理条例
C. 刑法
【单选题】
在柴油机转速为1000r/min、温度为70—80℃,主机油泵转速为___r/min。
A. 1310
B. 1410
C. 1510
【单选题】
16V240ZJB型柴油机排气门的冷态气门间隙为___+0.06mm。
A. 0.3
B. 0.5
C. 0.4
【单选题】
燃油在气缸内燃烧不充分是由于喷油器___所造成。
A. 调整失败
B. 调整压力过低
C. 调整压力过高
【单选题】
柴油机加载时大幅度悠车,是由于增、减载针阀___所致。
A. 开度过大
B. 开度过
C. 固着
【单选题】
如联合调节器补偿针阀开度过大,使反馈系统作用不良,易引起柴油机___。
A. 悠车
B. 飞车
C. 停机
【单选题】
柴油机转速试验时,柴油机转速从1000r/min降到430r/min的时间为___。
A. 20-22s
B. 18-20s
C. 15—18s
【单选题】
东风4B型机车柴油机最低稳定工作转速___。
A. 430r/min
B. 460r/min
C. 700r/min
【单选题】
东风4B型内燃机车的冷却水的装载量为___。
A. 1000kg
B. 1200kg
C. 2000kg
【单选题】
当柴油机转速为430r/rain时,操纵台机油压力表显示不小于___。
A. 80kPa
B. 88kPa
C. 120kPa
【单选题】
柴油机工作时,燃油泵出口压力应为___。
A. 100-200kPa
B. 150-250kPa
C. 200-300kPa
欢迎使用我爱刷题
×
微信搜索我爱刷题小程序
温馨提示
×
请在电脑上登陆“www.woaishuati.com”使用