【单选题】
By default, each ESXi 6.x host is provisioned with a certificate from which root certificate authority?___
A. RedHat Certificate Authority
B. VMware Certificate Authority
C. DigiCert Certificate Authority
D. Verisign Certificate Authority
查看试卷，进入试卷练习
微信扫一扫，开始刷题
相关试题
【单选题】
An administrator is adding an NFS datastore as shown in the Exhibit. What is the purpose of the Servers to be added list?___
A. It contains the IP addresses of the NFS Storage Server to provide multipathing capability.
B. It contains the IP addresses of the ESXi hosts that mount the datastore.
C. It contains the IP addresses used for
D. ynamic Discovery of targets.
【单选题】
An administrator reports that the System Event log data is only available for 24 hours when reviewing the Hardware Status tab. Which condition could be responsible for the loss of data?___
A. A Reset event log was executed.
B. The statistical collection level was set to a value of 1.
C. The boot disk of the host is corrupt.
D. Syslog has been configured at the vCenter Server level.
【单选题】
During an upgrade, the ESXi 6.x installer finds an existing version of ESXi and a VMFS3 volume. No virtual machines exist on the host or VMFS3 volume. The requirement is to upgrade to VMFS5. Which option should be chosen to meet this requirement?___
A. Upgrade ESXi and preserve the VMFS datastore
B. Install ESXi and preserve the VMFS datastore
C. Install ESXi and overwrite the VMFS datastore
D. Upgrade
E. SXi and overwrite the VMFS datastore
【单选题】
A vSphere 6.x Standard Switch is configured with 4 virtual machine portgroups, as shown in the exhibit. Which portgroup would be utilized by default when creating a new virtual machine?___
A. Access Network
B. DMZ Network
C. VM Network
D. Virtual Machine Network
【单选题】
Which vSphere 6.x feature will allow an organization to utilize native snapshots?___
A. Virtual Volumes
B. Virtual SAN
C. VMFS3
D. VMFS5
【单选题】
An administrator is creating a new vSphere Distributed Switch that will be utilized with a specific vSphere Cluster. The cluster itself contains a mix of ESXi 5.x and 6.x Hosts. Which Distributed Switch version should be created to support this configuration?___
A. Distributed Switch: 6.0.0
B. Distributed Switch: 5.0.0
C. Distributed Switch: 5.1.0
D. Distributed Switch: 5.5.0
【单选题】
Which load balancing policy, previously limited to vSphere Distributed Switches, is now available on vSphere Standard Switches with vSphere 6.x?___
A. Route based on physical NIC workload
B. Route based on IP Hash
C. Route based on the originating virtual port
D. Route based on Source MAC Hash
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
An administrator has just completed performing an interactive installation of ESXi 6.x and is booting the host. How is the network initially configured?___
A. The network is configured by Automatic Private IP Addressing (APIPA).
B. The network is configured based on the settings detected in DNS.
C. The network is configured with the address as specified in the installer.
D. The network is automatically configured by DHCP.
【单选题】
You have just installed an ESXi 6.x Host. As part of your company security regulations, a security banner must be presented on the console of the host. How can this action be accomplished?___
A. Configure the Advanced Settings > Annotations screen of the ESXi host.
B. This is configured from the Direct Console User Interface configuration menu.
C. It is not possible to configure a security banner for the ESXi host.
D. From vCenter Server, this setting is configured globally in the vCenter Server configuration.
【单选题】
An administrator is only able to see the Health Badge when using the vRealize Operations user interface. What is the likely cause of this behavior?___
A. The vRealize Operations Foundation License is in use.
B. The vmware-sps service failed to start.
C. The vRealize Operations Standard License is in use.
D. The vmware-rbd-watchdog service failed to start.
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets either of these conditions: <High virtual CPU> <High active memory consumption.> <The alarm is only triggering when both of the conditions are met.> What can be done to correct the alarm behavior?___
A. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory and link them together with ESXCLI.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is attempting to restore a number of files in a directory within the Operating System of a virtual machine. How can the administrator restore the files from a previous backup? ___
A. Use the File Level Restore option from the selected backup of the virtual machine in the vSphere Web Client.
B. Connect to the File Level Restore tool from a web browser in the virtual machine.
C. Connect to the File Level Restore tool from the VMware
D. ata Protection appliance.
【单选题】
After selecting an object in vRealize Operations, how can a user compare the badge values of related child objects? ___
A. Use the Scoreboard tab
B. Use the Relationship tab
C. Use the Members tab
D. Use the Overview tab
【单选题】
You want to deploy a vApp and dynamically assign IP addresses without a DHCP server on the network. Which action would you take to accomplish this task? ___
A. Enable IP pools.
B. Configure a local DHCP server in the vApp.
C. Enable NAT on the vApp router.
D. Configure the guest OS for workgroup and WINS.
【单选题】
What is the optimal configuration when building a virtual machine for a single-threaded Windows application? ___
A. Deploy single-threaded applications on uniprocessor virtual machines.
B. Deploy single-threaded applications on symmetric multi-processor virtual machines.
C. Tune single-threaded applications to take advantage of symmetric multi-processor resources.
D. Tune Single-threaded applications at the hypervisor level.
【单选题】
An administrator has created the resource pool configuration shown in the Exhibit. Based on the exhibit, which virtual machine(s) can be successfully powered on? ___
A. VM-M1 only
B. VM-K1 only
C. VM-K1 and VM-K2 only
D. VM-K1, VM-K2, and VM-M1
【单选题】
Which vSphere 6 Enterprise Edition feature will allow an organization to ensure that critical multi-threaded applications have the maximum possible uptime? ___
A. Fault Tolerance
B. High Availability
C. Distributed Resource Scheduler
D. App HA
【单选题】
An administrator has a virtual machine that requires four times the compute resources than other virtual machines on the same ESXi 6.x host. How should the administrator configure the virtual machine settings, in order to be prepared for any resource contention? ___
A. Set the shares of the priority virtual machine to High and the rest to Low.
B. Set the shares of the priority virtual machine to High.
C. Set the shares of the priority virtual machine to High and the rest to Normal.
D. Set the shares of the priority virtual machine to Normal and the rest to Low.
【单选题】
Which type of Adapter does not require vmkernel networking? ___
A. Independent Hardware iSCSI Adapter
B. Dependent Hardware iSCSI Adapter
C. Software iSCSI Adapter
D. Software FCoE Adapter
【单选题】
During the installation of ESXi 6.0, the following error message is reported: Hardware Virtualization is not a feature of the CPU, or is not enabled in the BIOS. Which condition would generate this message? ___
A. LAHF/SAHF is not enabled in the BIOS.
B. NX/XD is not enabled in the BIOS.
C. SSE3 is not enabled in the BIOS.
D. Hyperthreading is not enabled in the BIOS.
【单选题】
An administrator is unable to login to vCenter Server when using the vSphere web client. The administrator successfully accessed vCenter Server using the client earlier the same day. What is the most appropriate first step the administrator should take to resolve this issue? ___
A. Verify the web browser being used has Adobe Flash plugin version 11.5 or later
B. Verify the vCenter Single Sign-On service is running on the vCenter Server
C. Verify the vSphere Web Server service is running on the vCenter Server
D. Verify the administrator has permissions configured in vCenter Server
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets two conditions: <high virtual CPU> <high active memory consumption> The alarm is malfunctioning and triggering when either condition is met instead of both. What can be done to correct the issue? ___
A. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
What must be enabled to ensure that VM Component Protection (VMCP) works in a High Availability cluster? ___
A. VMware Tools Virtual Machine Communication Interface (VMCI)
B. Fault Tolerance
C. Atomic Test and Set (ATS)
D. All Paths Down (APD) Timeout
【单选题】
An administrator wants to add a web server to an existing multi-tier application consisting of three virtual machines: <A web server> <A database server An application server> The web server should be added to the application when the primary web server reaches: <70% vCPU utilization> <55% active memory> Which option will achieve this result? ___
A. Create a virtual machine alarm with an action to run a script that starts a new instance of the web server.
B. Create a host cpu and memory alarm with an action to run a script that starts a new instance of the webserver.
C. Configure HA application monitoring for the web server and set it to trigger deployment of a new instance of the web server.
D. Configure Fault Tolerance on the virtual machine and leave the secondary machine disabled until needed.
【单选题】
An administrator has an application that requires connection directly to PCI devices through a virtual machine. What is a limitation of this configuration? ___
A. Devices must be reserved for PCI passthrough on at least one host on which the virtual machine will run.
B. Snapshots are not supported with DirectPath I/O passthrough devices.
C. A maximum of 18 PCI vSphere
D. irectPath devices can be added to a virtual machine.
【单选题】
The vSphere administrator is configuring directory services for an ESXi host: What should the vSphere administrator do to configure the host to use CAM services? ___
A. Check the Use vSphere Authentication Proxy checkbox.
B. Set Select Directory Service Type to CAM services.
C. Specify CAM$ for the
D. omain.
【单选题】
Which statement is true regarding the licensing of vCenter Server? ___
A. The license for vCenter Server must be provided at the time of installation.
B. Changing the license assigned to vCenter Server requires a restart of the vCenter Server service.
C. Virtual machines can still be powered on if the vCenter Server license expires.
D. Licensing for a single vCenter Server installation is determined by the number of managed virtual machines.
【单选题】
When configuring vSphere Replication for a virtual machine, what is the lowest Recovery Point Objective (RPO) that can be selected? ___
A. 1 min
B. 5 min
C. 10 min
D. 15min
【单选题】
A developer needs to create a multi-tier development stack for a home lab. Which vSphere product will support the architecture required for the least software cost? ___
A. vSphere Hypervisor
B. vSphere Essentials
C. VMware Player
D. VMware Workstation
【单选题】
An administrator is installing Windows into a virtual machine. The DVD has been mounted on the Host and configured for the virtual machine as shown in the Exhibit. Based on the exhibit, when the virtual machine is booted, why would it attempt to search for a PXE server? ___
A. The CD/DVD device is not connected.
B. The ISO is in the incorrect storage location.
C. The OS minimum requirements have not been met.
D. The CD/DVD device is not set to Client Device.
【单选题】
What component must be installed prior to deploying a vCenter Server in vSphere 6.x? ___
A. vCenter Identity Services
B. Platform Services Controller
C. vCenter Single Sign-On
D. Client Integration Plug-In
【单选题】
What is a valid plug-in status for a plug-in that has been added to a vSphere client? ___
A. Disabled
B. Unknown
C. Stopped
D. Installed
【单选题】
Users of an application are reporting performance issues. The following performance values are observed in the vSphere Web Client: <Host CPU utilization is 90%> <Virtual Machine memory utilization is consistently greater than 90% CPU Ready values are higher than 20%> What could be the cause of the application performance issue? ___
A. The host is lacking the CPU resources required to meet the demand.
B. The host is lacking the memory resources required to meet the demand.
C. The virtual machine is lacking the CPU resources required to meet the demand.
D. The virtual machine is lacking the memory resources required to meet the demand.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is re-provisioning an ESXi host and moving it to another datacenter. Which DCUI option should the administrator use to revert the system configuration to the default settings? ___
A. Reset System Configuration
B. Rebuild Default System Configuration
C. Revert System Configuration
D. Renew Default System Configuration
【单选题】
An administrator has just completed installing an ESXi 6.x host, but doesn't know what address has been configured. Where is the ESXi host IP address configured? ___
A. RVC console
B. Direct Console User Interface
C. vSphere Web Client
D. vSphere Client
【单选题】
When is it possible to place a VMFS5 datastore in maintenance mode? ___
A. When it is a member of a Storage DRS cluster
B. When it is a member of Virtual SAN cluster
C. When it is a member of a multi-extent datastore
D. When it is a member of a Virtual Volume
推荐试题
【单选题】
当原边网压高于32kV且持续___ms，四象限脉冲整流器和逆变器的门极均被封锁，输入回路中的工作接触器断开，同时向微机控制系统发出原边过电压信息。
【单选题】
闭合蓄电池开关，若控制电源柜上电压表显示___V时，机车无法升弓。
【单选题】
当停放制动风缸中风压达到___kPa以上，弹停装置缓解后允许行车。
【单选题】
和谐型电力机车受电弓升高到2m的升弓时间(自绝缘子底面)：___s。
【单选题】
和谐型电力机车自动制动手柄位置包括运转位、初制动(最小减压位) 、全制动(最大减压位)、___、重联位、紧急位。初制动和全制动之间是常用制动区。
【单选题】
均衡风缸控制模块ERCP中的作用电磁阀APP得电时，其作用为___。
A. 总风通均衡风缸的通路被关断，均衡风缸保压
B. 均衡风缸通大气的通路被关断，均衡风缸保压
C. 总风通均衡风缸，均衡风缸增压
【单选题】
LCDM采用液晶显示屏，带有8个功能键，用于___选择。
A. 菜单和功能
B. 电空配合模式
C. 弹停制动控制
【单选题】
和谐型电力机车均衡风缸控制模块（ERCP）本机状态下，响应自阀指令，控制均衡风缸压力及___压力。
【单选题】
和谐型电力机车的空转滑行保护、___控制等不参与重联控制。
【单选题】
16CP控制模块中的REL缓解电磁阀失电时，其作用为___。
A. 作用风缸通大气，作用风缸减压。
B. 作用风缸通大气通路被关断，作用风缸保压。
C. 总风通作用风缸，作用风缸增压。
【单选题】
制动显示屏LCDM位于司机室操纵台，通过它可进行本机/补机，___定压，列车管投入／切除，客车／货车，补风／不补风，CCBⅡ系统自检，风表值标定，故障查询等功能的选择和应用。
【单选题】
BPCP是___。
A. 均衡风缸控制部分
B. 列车管控制部分
C. 总风控制部
【单选题】
紧急制动产生后，必须将自动制动阀置于紧急位___s后才能缓解。
【单选题】
___为主变流器控制提供同步信号、为原边电压的检测和电度表的计量提供电压输入信号的电器。
【单选题】
13号管控制模块（13CP）本机状态时，侧推单独制动手柄来实现单独___压力的功能。
A. 增加制动缸压力
B. 缓解均衡风缸
C. 缓解机车制动缸
【单选题】
电力机车制动盘磨耗限度为每侧___mm，超过磨耗极限值，必须更换制动盘。
【单选题】
16CP控制模块中的REL缓解电磁阀得电时，其作用为___。
A. 作用风缸通大气，作用风缸减压。
B. 作用风缸通大气通路被关断，作用风缸保压。
C. 总风通作用风缸，作用风缸增压。
【单选题】
接受均衡风缸的控制压力产生与之相等的列车管压力，实现对列车的制动、缓解控制功能的部件是均衡风缸控制模块BPCP上的___。
A. BP作用阀
B. MV53电磁阀
C. BPCO机械阀
【单选题】
和谐型电力机车微机控制监视系统TCMS主要功能是实现机车特性控制、逻辑控制、故障监视和诊断，并将有关信息送到司机操纵台上的___。
A. 微机显示屏
B. 制动显示屏
C. 监控显示屏
【单选题】
当无动力塞门在投入位时，限制列车管给总风缸充风的压力到___kPa左右。
【单选题】
均衡风缸控制模块ERCP中的缓解电磁阀REL得电时，作用为___。
A. 均衡风缸通大气，均衡风缸减压
B. 均衡风缸通大气的通路被关断，均衡风缸保压
C. 总风通均衡风缸，均衡风缸增压
【单选题】
均衡风缸控制模块ERCP中的缓解电磁阀REL失电时，作用为___。
A. 均衡风缸通大气，均衡风缸减压
B. 均衡风缸通大气的通路被关断，均衡风缸保压
C. 总风通均衡风缸，均衡风缸增压
【单选题】
DSA200型受电弓内装有降弓装置，当弓网故障时，可___降弓保护。
【单选题】
和谐型电力机车再生制动时，逆变器工作在整流状态，___整流器工作在逆变状态，并通过中间直流回路向主变压器牵引绕组馈电，将再生能量回馈至接触网。
【单选题】
关闭Z10.23截止塞门后，会出现___。
A. 两台转向架制动缸都不上闸
B. 第2转向架制动缸不上闸
C. 第1转向架不上闸
【单选题】
在蓄电池未充电、总风无压力空气的情况下，要缓解机车弹停装置，必须___。
A. 按压司机室弹停装置缓解按钮
B. 按压气阀柜弹停模块上的缓解脉冲电磁阀
C. 手拉4个弹停风缸的缓解拉杆
【单选题】
在正常情况下，要缓解弹停装置，只需___。
A. 按压司机室弹停装置缓解按钮
B. 按压气阀柜弹停模块上的缓解脉冲电磁阀
C. 手拉4个弹停风缸的缓解拉杆
【单选题】
正常情况下，___不属于辅助变流器1供电范围。
A. 牵引电动机风机
B. 复合冷却器风机
C. 水泵
【单选题】
正常情况下，___不属于辅助变流器2供电范围。
A. 牵引电动机风机
B. 空气压缩机
C. 油泵
【单选题】
和谐型电力机车中，___属于变频变压起动的部件。
A. 牵引电动机风机
B. 空气压缩机
C. 空调
【单选题】
和谐型电力机车中，___属于恒频恒压起动的部件。
A. 牵引电动机风机
B. 油泵
C. 复合冷却器风
【单选题】
机车无火回送时，必须开放回送机车的___塞门。
【单选题】
大闸从运转位推至抑制位，列车管___。
A. 实行最大减压
B. 实行初减
C. 减压100kPa
【单选题】
大闸从运转位推至初制位，列车管减压___kPa。
【单选题】
CCBⅡ制动系统中，如果惩罚制动动作之后，大闸必须在___摆1s以上，列车管才能缓解。
【单选题】
和谐型机车在1端进行撒砂试验，机车向前运行时，位于___轴前的撒砂装置进行撒砂。
A. 1、3位
B. 4、6位
C. 1、3、4、6位
【单选题】
和谐型机车在1端进行撒砂试验，机车向后运行时，位于___轴前的撒砂装置进行撒砂。
A. 1、3位
B. 4、6位
C. 1、3、4、6位
【单选题】
在设置CCBⅡ制动系统的均衡风缸、列车管压力参数时，其误差范围不得超过___kPa。
【单选题】
CCBⅡ制动系统中，___指令不属于微处理器X--IPM发出。
