【单选题】
An administrator enables vSphere High Availability (HA) on an existing cluster with a large number of hosts and virtual machines. The administrator notices that the setup of vSphere HA on some of the hosts is failing. What step, if taken, might resolve this issue?___
A. Increase the value of the config.vpxd.das.electionWaitTimeSec setting.
B. Set the value of vpxd.das.aamMemoryLimit to 256.
C. Set the value of the das.useDefaultIsolationAddress setting to False.
D. Increase the value of the das.iostatsinterval setting.
查看试卷，进入试卷练习
微信扫一扫，开始刷题
相关试题
【单选题】
An ESXi 6.x host consists of 24 logical cores. Hyperthreading is enabled on the host. What is the maximum number of vCPUs that can be assigned to a virtual machine on this host?___
【单选题】
By default, each ESXi 6.x host is provisioned with a certificate from which root certificate authority?___
A. RedHat Certificate Authority
B. VMware Certificate Authority
C. DigiCert Certificate Authority
D. Verisign Certificate Authority
【单选题】
An administrator is adding an NFS datastore as shown in the Exhibit. What is the purpose of the Servers to be added list?___
A. It contains the IP addresses of the NFS Storage Server to provide multipathing capability.
B. It contains the IP addresses of the ESXi hosts that mount the datastore.
C. It contains the IP addresses used for
D. ynamic Discovery of targets.
【单选题】
An administrator reports that the System Event log data is only available for 24 hours when reviewing the Hardware Status tab. Which condition could be responsible for the loss of data?___
A. A Reset event log was executed.
B. The statistical collection level was set to a value of 1.
C. The boot disk of the host is corrupt.
D. Syslog has been configured at the vCenter Server level.
【单选题】
During an upgrade, the ESXi 6.x installer finds an existing version of ESXi and a VMFS3 volume. No virtual machines exist on the host or VMFS3 volume. The requirement is to upgrade to VMFS5. Which option should be chosen to meet this requirement?___
A. Upgrade ESXi and preserve the VMFS datastore
B. Install ESXi and preserve the VMFS datastore
C. Install ESXi and overwrite the VMFS datastore
D. Upgrade
E. SXi and overwrite the VMFS datastore
【单选题】
A vSphere 6.x Standard Switch is configured with 4 virtual machine portgroups, as shown in the exhibit. Which portgroup would be utilized by default when creating a new virtual machine?___
A. Access Network
B. DMZ Network
C. VM Network
D. Virtual Machine Network
【单选题】
Which vSphere 6.x feature will allow an organization to utilize native snapshots?___
A. Virtual Volumes
B. Virtual SAN
C. VMFS3
D. VMFS5
【单选题】
An administrator is creating a new vSphere Distributed Switch that will be utilized with a specific vSphere Cluster. The cluster itself contains a mix of ESXi 5.x and 6.x Hosts. Which Distributed Switch version should be created to support this configuration?___
A. Distributed Switch: 6.0.0
B. Distributed Switch: 5.0.0
C. Distributed Switch: 5.1.0
D. Distributed Switch: 5.5.0
【单选题】
Which load balancing policy, previously limited to vSphere Distributed Switches, is now available on vSphere Standard Switches with vSphere 6.x?___
A. Route based on physical NIC workload
B. Route based on IP Hash
C. Route based on the originating virtual port
D. Route based on Source MAC Hash
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
An administrator has just completed performing an interactive installation of ESXi 6.x and is booting the host. How is the network initially configured?___
A. The network is configured by Automatic Private IP Addressing (APIPA).
B. The network is configured based on the settings detected in DNS.
C. The network is configured with the address as specified in the installer.
D. The network is automatically configured by DHCP.
【单选题】
You have just installed an ESXi 6.x Host. As part of your company security regulations, a security banner must be presented on the console of the host. How can this action be accomplished?___
A. Configure the Advanced Settings > Annotations screen of the ESXi host.
B. This is configured from the Direct Console User Interface configuration menu.
C. It is not possible to configure a security banner for the ESXi host.
D. From vCenter Server, this setting is configured globally in the vCenter Server configuration.
【单选题】
An administrator is only able to see the Health Badge when using the vRealize Operations user interface. What is the likely cause of this behavior?___
A. The vRealize Operations Foundation License is in use.
B. The vmware-sps service failed to start.
C. The vRealize Operations Standard License is in use.
D. The vmware-rbd-watchdog service failed to start.
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets either of these conditions: <High virtual CPU> <High active memory consumption.> <The alarm is only triggering when both of the conditions are met.> What can be done to correct the alarm behavior?___
A. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory and link them together with ESXCLI.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is attempting to restore a number of files in a directory within the Operating System of a virtual machine. How can the administrator restore the files from a previous backup? ___
A. Use the File Level Restore option from the selected backup of the virtual machine in the vSphere Web Client.
B. Connect to the File Level Restore tool from a web browser in the virtual machine.
C. Connect to the File Level Restore tool from the VMware
D. ata Protection appliance.
【单选题】
After selecting an object in vRealize Operations, how can a user compare the badge values of related child objects? ___
A. Use the Scoreboard tab
B. Use the Relationship tab
C. Use the Members tab
D. Use the Overview tab
【单选题】
You want to deploy a vApp and dynamically assign IP addresses without a DHCP server on the network. Which action would you take to accomplish this task? ___
A. Enable IP pools.
B. Configure a local DHCP server in the vApp.
C. Enable NAT on the vApp router.
D. Configure the guest OS for workgroup and WINS.
【单选题】
What is the optimal configuration when building a virtual machine for a single-threaded Windows application? ___
A. Deploy single-threaded applications on uniprocessor virtual machines.
B. Deploy single-threaded applications on symmetric multi-processor virtual machines.
C. Tune single-threaded applications to take advantage of symmetric multi-processor resources.
D. Tune Single-threaded applications at the hypervisor level.
【单选题】
An administrator has created the resource pool configuration shown in the Exhibit. Based on the exhibit, which virtual machine(s) can be successfully powered on? ___
A. VM-M1 only
B. VM-K1 only
C. VM-K1 and VM-K2 only
D. VM-K1, VM-K2, and VM-M1
【单选题】
Which vSphere 6 Enterprise Edition feature will allow an organization to ensure that critical multi-threaded applications have the maximum possible uptime? ___
A. Fault Tolerance
B. High Availability
C. Distributed Resource Scheduler
D. App HA
【单选题】
An administrator has a virtual machine that requires four times the compute resources than other virtual machines on the same ESXi 6.x host. How should the administrator configure the virtual machine settings, in order to be prepared for any resource contention? ___
A. Set the shares of the priority virtual machine to High and the rest to Low.
B. Set the shares of the priority virtual machine to High.
C. Set the shares of the priority virtual machine to High and the rest to Normal.
D. Set the shares of the priority virtual machine to Normal and the rest to Low.
【单选题】
Which type of Adapter does not require vmkernel networking? ___
A. Independent Hardware iSCSI Adapter
B. Dependent Hardware iSCSI Adapter
C. Software iSCSI Adapter
D. Software FCoE Adapter
【单选题】
During the installation of ESXi 6.0, the following error message is reported: Hardware Virtualization is not a feature of the CPU, or is not enabled in the BIOS. Which condition would generate this message? ___
A. LAHF/SAHF is not enabled in the BIOS.
B. NX/XD is not enabled in the BIOS.
C. SSE3 is not enabled in the BIOS.
D. Hyperthreading is not enabled in the BIOS.
【单选题】
An administrator is unable to login to vCenter Server when using the vSphere web client. The administrator successfully accessed vCenter Server using the client earlier the same day. What is the most appropriate first step the administrator should take to resolve this issue? ___
A. Verify the web browser being used has Adobe Flash plugin version 11.5 or later
B. Verify the vCenter Single Sign-On service is running on the vCenter Server
C. Verify the vSphere Web Server service is running on the vCenter Server
D. Verify the administrator has permissions configured in vCenter Server
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets two conditions: <high virtual CPU> <high active memory consumption> The alarm is malfunctioning and triggering when either condition is met instead of both. What can be done to correct the issue? ___
A. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
What must be enabled to ensure that VM Component Protection (VMCP) works in a High Availability cluster? ___
A. VMware Tools Virtual Machine Communication Interface (VMCI)
B. Fault Tolerance
C. Atomic Test and Set (ATS)
D. All Paths Down (APD) Timeout
【单选题】
An administrator wants to add a web server to an existing multi-tier application consisting of three virtual machines: <A web server> <A database server An application server> The web server should be added to the application when the primary web server reaches: <70% vCPU utilization> <55% active memory> Which option will achieve this result? ___
A. Create a virtual machine alarm with an action to run a script that starts a new instance of the web server.
B. Create a host cpu and memory alarm with an action to run a script that starts a new instance of the webserver.
C. Configure HA application monitoring for the web server and set it to trigger deployment of a new instance of the web server.
D. Configure Fault Tolerance on the virtual machine and leave the secondary machine disabled until needed.
【单选题】
An administrator has an application that requires connection directly to PCI devices through a virtual machine. What is a limitation of this configuration? ___
A. Devices must be reserved for PCI passthrough on at least one host on which the virtual machine will run.
B. Snapshots are not supported with DirectPath I/O passthrough devices.
C. A maximum of 18 PCI vSphere
D. irectPath devices can be added to a virtual machine.
【单选题】
The vSphere administrator is configuring directory services for an ESXi host: What should the vSphere administrator do to configure the host to use CAM services? ___
A. Check the Use vSphere Authentication Proxy checkbox.
B. Set Select Directory Service Type to CAM services.
C. Specify CAM$ for the
D. omain.
【单选题】
Which statement is true regarding the licensing of vCenter Server? ___
A. The license for vCenter Server must be provided at the time of installation.
B. Changing the license assigned to vCenter Server requires a restart of the vCenter Server service.
C. Virtual machines can still be powered on if the vCenter Server license expires.
D. Licensing for a single vCenter Server installation is determined by the number of managed virtual machines.
【单选题】
When configuring vSphere Replication for a virtual machine, what is the lowest Recovery Point Objective (RPO) that can be selected? ___
A. 1 min
B. 5 min
C. 10 min
D. 15min
【单选题】
A developer needs to create a multi-tier development stack for a home lab. Which vSphere product will support the architecture required for the least software cost? ___
A. vSphere Hypervisor
B. vSphere Essentials
C. VMware Player
D. VMware Workstation
【单选题】
An administrator is installing Windows into a virtual machine. The DVD has been mounted on the Host and configured for the virtual machine as shown in the Exhibit. Based on the exhibit, when the virtual machine is booted, why would it attempt to search for a PXE server? ___
A. The CD/DVD device is not connected.
B. The ISO is in the incorrect storage location.
C. The OS minimum requirements have not been met.
D. The CD/DVD device is not set to Client Device.
【单选题】
What component must be installed prior to deploying a vCenter Server in vSphere 6.x? ___
A. vCenter Identity Services
B. Platform Services Controller
C. vCenter Single Sign-On
D. Client Integration Plug-In
【单选题】
What is a valid plug-in status for a plug-in that has been added to a vSphere client? ___
A. Disabled
B. Unknown
C. Stopped
D. Installed
【单选题】
Users of an application are reporting performance issues. The following performance values are observed in the vSphere Web Client: <Host CPU utilization is 90%> <Virtual Machine memory utilization is consistently greater than 90% CPU Ready values are higher than 20%> What could be the cause of the application performance issue? ___
A. The host is lacking the CPU resources required to meet the demand.
B. The host is lacking the memory resources required to meet the demand.
C. The virtual machine is lacking the CPU resources required to meet the demand.
D. The virtual machine is lacking the memory resources required to meet the demand.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is re-provisioning an ESXi host and moving it to another datacenter. Which DCUI option should the administrator use to revert the system configuration to the default settings? ___
A. Reset System Configuration
B. Rebuild Default System Configuration
C. Revert System Configuration
D. Renew Default System Configuration
推荐试题
【单选题】
单相整流电路按其电路结构特点来分，有半波、全波、_______三种整流电路。[323010102]___
【单选题】
滤波电容器的数值一般在几微法到几百微法，其耐压应大于负载的输出电压_______。[222000000]___
A. 平均值
B. 有效值
C. 最大值
D. 最小值
【单选题】
微分电路RC时间常数τ_______输入波形周期。[332010102]___
【单选题】
为提高电容器的容量和减小体积，两电极之间介质采用电解质，这种电容器称为_______，使用时应注意电容器正、负的极性。[232000000]___
A. 纸介电容器
B. 云母电容器
C. 电解电容器
D. 涤纶电容器
【单选题】
_______的测量，多数是测量峰—峰值或是峰到波谷之间的数值。[332010102]___
A. 交流
B. 交流分量
C. 直流
D. 脉冲电压
【单选题】
放大器中的电流负反馈电路，主要起稳定工作点和_______的作用。[322010102]___
A. 抗干扰
B. 直接耦合
C. 输入阻抗高
D. 限流
【单选题】
在输入电源、旁路或电池供电之间任意切换，UPS的转换时间均应小于_______。[321010102]___
A. 4ms
B. 6ms
C. 8ms
D. 10ms
【单选题】
UPS的最小容量应能满足计算机信息记录、储存、退出系统等有关运行所需的时间，应不少于_______。[321010102]___
A. 3min
B. 5min
C. 8min
D. 10min
【单选题】
CTCS-2中，下列_______为紧急制动模式。[321010104]___
A. EB
B. NB
C. W.REL
D. SW
【单选题】
当用针式打印机打印时，发现打印出的文字变淡，应_______。[321000000]___
A. 更换打印机
B. 更换打印头
C. 更换打印共享器
D. 更换色带
【单选题】
“中国列车运行控制系统”的英文缩写是_______。[321000000]___
A. CTC5
B. TDCS
C. CTC
D. CTCS
【单选题】
CTCS2－200H型车载列控系统“车载安全计算机”的英文缩写是_______。[321000000]___
A. VC
B. BTM
C. TIU
D. DRU
【单选题】
CTCS2－200H型车载列控系统“应答器信息接收单元”的英文缩写是_______。[321000000]___
A. VC
B. BTM
C. TIU
D. DRU
【单选题】
CTCS2－200H型列控系统“记录单元”的英文缩写是_______。[321000000]___
A. VC
B. BTM
C. TIU
D. DRU
【单选题】
CTCS2－200H型列控系统“制动接口单元”的英文缩写是_______。[321000000]___
A. VC
B. BTM
C. TIU
D. DRU
【单选题】
列控车载设备“车载安全计算机”的英文缩写是_______。[321030101]___
A. VC
B. STM
C. BTM
D. DRV
【单选题】
_______的既有提速线路，客运专线，宜采用CTCS-2级列控系统。[322000000]___
A. 100km/h～160km/h
B. 160km/h～200km/h
C. 200km/h～250km/h
D. 250km/h～300km/h
【单选题】
CTCS-2列控系统车载设备工作环境温度为-25℃～_______。[321010103]___
A. 40℃
B. 50℃
C. 60℃
D. 70℃
【单选题】
CTCS-2列控系统车载设备输入额定工作电压为_______。[322010102]___
A. DC110V
B. DC220V
C. AC110V
D. AC220V
【单选题】
CTCS-2列控系统车载设备输入最大工作电压为_______。[322010102]___
A. DC110V
B. DC137.5V
C. AC110V
D. AC137.5V
【单选题】
CTCS-2列控系统车载设备输入最低工作电压为_______。[322010102]___
A. DC36V
B. DC77V
C. AC36V
D. AC77V
【单选题】
CTCS根据系统配置按功能划分为_______级。[323000000]___
【单选题】
XDZ型多功能信号点灯装置主丝断丝时，应能自动转换到副灯丝，转换时间小于_______。[322010101]___
A. 0.1s
B. 0.2s
C. 0.3s
D. 0.5s
【单选题】
DDXL-34型防雷信号点灯转换单元空载时，其二次端子电压的误差应不大于额定电压值的_______。[321010101]___
A. ±2%
B. ±3%
C. ±5%
D. ±8%
【单选题】
DDXL-34型防雷信号点灯转换单元满载时，其二次端子电压的误差应不大于额定电压值的_______。[322010101]___
A. 80%
B. 85%
C. 90%
D. 95%
【单选题】
DDXL-34型防雷信号点灯转换单元，副丝回路中的检流变压器工作时，其二次侧电流为_______。[321010101]___
A. 1mA～2mA
B. 1.5mA～3mA
C. 1.5mA～2.5mA
D. 2mA～4mA
【单选题】
DDXL-34型防雷信号点灯单元的防雷电压转移系数小于_______。[331010101]___
A. 1/200
B. 1/300
C. 1/400
D. 1/500
【单选题】
DZD多功能智能点灯单元副丝电压为主丝电压的_______。[332010101]___
A. 80%
B. 85%
C. 90%
D. 90～95%
【单选题】
DZD多功能智能点灯单元主、副丝断丝时，报警时间应不大于_______。[331010101]___
A. 5s
B. 10s
C. 15s
D. 20s
【单选题】
LED色灯机构发光二极管损坏数量达到_______时，不能影响信号显示的规定距离。[311010103]___
A. 10%
B. 20%
C. 30%
D. 40%
【单选题】
LED色灯机构的正常绝缘电阻应不小于_______。[321010103]___
A. 20MΩ
B. 30MΩ
C. 40MΩ
D. 50MΩ
【单选题】
ZXD型智能信号点灯报警装置点灯单元在输入电压范围内，冷丝冲击电流小于或等于_______。[321010102]___
【单选题】
ZXD型智能信号点灯报警装置点灯单元在输入电压范围内，软启动时间小于或等于_______。[321010102]___
A. 0.1s
B. 0.2s
C. 0.3s
D. 0.5s
【单选题】
CTCS-2列控系统出站有源应答器的信息丢失后，列控车载设备生成NBP为_______的核对速度曲线。[322000000]___
A. 20km/h
B. 30km/h
C. 50km/h
D. 55km/h
【单选题】
CTCS-2级车站的临时限速信息必须管辖到从执行点应答器至列车在执行点线路速度下的常用制动至_______的制动距离所需的数据。[322000000]___
A. 25km/h
B. 30km/h
C. 45km/h
D. 55km/h
【单选题】
在用BEPT向应答器写入数据时，应将BEPT置于应答器_______。[322000000]___
A. 正下方
B. 正上方
C. 正左方
D. 正右方
【单选题】
在用BEPT向应答器写入数据直至结束，大约需要_______。[311000000]___
A. 30s
B. 1min
C. 3min
D. 5min
【单选题】
在用BEPT向LKD1-T型车站列控中心LEU数据写入直至结束，大约需要_______。[311000000]___
A. 3min
B. 5min
C. 8min
D. 10min
【单选题】
CTCS-2列控系统应答器运行温度范围为－40℃～_______。[311010103]___
A. ＋50℃
B. ＋60℃
C. ＋70℃
D. ＋80℃
【单选题】
BE1K-800型扼流变压器牵引线圈中点允许通过连续总电流为_______。[322010101]___
A. 400A
B. 600A
C. 800A
D. 1000A
