【判断题】
固定式装配适用于单件和小批量模具的装配,以及装配精度要求较高,需要调整的部位较多的装配
查看试卷,进入试卷练习
微信扫一扫,开始刷题
相关试题
【判断题】
我国对企业发生的事故,坚持“四不放过”原则进行处理
【判断题】
在机械设备中,凸轮表面误差将会引起扭转振动
【单选题】
What happens to the status of users already logged into ESXi Shell when a vSphere administrator enables lockdown mode?___
A. Users remain logged in and can run commands, except to disable lockdown mode.
B. Users remain logged in and can run commands, including disabling lockdown mode.
C. Users are immediately logged out of ESXi Shell.
D. Users are logged out after a timeout specified by the vSphere administrator.
【单选题】
What is the effective vSphere licensing level during the 60 day evaluation period?___
A. vSphere Foundation Essentials Plus
B. vSphere Standard
C. vSphere Enterprise
D. vSphere
E. nterprise Plus
【单选题】
To comply with security requirements, an administrator with a vCenter Server Appliance needs to force logoff of the vSphere web client after 10 minutes of inactivity.What should the administrator do to meet the requirement?___
A. Edit: /var/lib/vmware/vsphere-client/webclient.properties, modify session.timeout=10
B. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=600
C. Edit: /var/lib/vmware/vsphere-client/webclient.properties modify session.timeout=600
D. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=10
【单选题】
An administrator enables High Availability (HA) on a Virtual SAN cluster.Which network is used for HA Network Heatbeat configuration?___
A. The Management network.
B. The vMotion network.
C. The Virtual SAN network.
D. The Provisioning Traffic network.
【单选题】
A user wants to monitor a business-critical virtual machine to ensure that it doesn't run out of resources. What metric could be monitored in vRealize Operations to address this concern?___
A. Time Remaining badge
B. Compliance badge
C. Reclaimable Waste badge
D. Density badge
【单选题】
An administrator has recently installed a new ESXi 6.x Host, and during the configuration notices sporadic network problems. To check whether the issue occurred sometime during the configuration, the administrator would like to reset the system.How can this be accomplished in the shortest amount of time?___
A. Run the ESXi installer again and reinstall the host.
B. Select the Reset System Configuration option from the vSphere Client when connected directly to the host.
C. From the
D. irect Console User Interface, select Reset System Configuration.
【单选题】
A vApp is running out of compute resources when overall activity is high within the resource pool. At other times, everything is fine.What should be done to resolve this issue?___
A. Increase the size of the resource pool Shares.
B. Set the vApp's CPU and Memory Reservation Type to Expandable.
C. Set the vApp's CPU and Memory Limit to Unlimited.
D. Create a new resource pool with the existing hardware configuration.
【单选题】
A virtual machine has been renamed and an administrator is unable to find files with the new virtual machine name in the datastore.What is the reason for this?___
A. The names of the files on the datastore do not change.
B. The names of the files on the datastore have been corrupted.
C. The virtual machine needs to be re-added to the inventory.
D. The Distributed Resource Scheduler moved the virtual machine to another host.
【单选题】
An administrator has configured network connectivity for a new virtual machine, as shown in the Exhibit.What will occur with the network traffic of this virtual machine when communicating externally from vSwitch1?___
A. The virtual machine will communicate on both uplinks
B. The virtual machine will only communicate on vmnic1
C. The virtual machine will only communicate on vmnic2
D. The virtual machine will fail to communicate externally
【单选题】
An administrator is unable to create the first group in a new vRealize Operations environment. What is the likely cause of the problem?___
A. There are no group types defined.
B. The group is not defined in SSO.
C. There are more than 32 group types defined.
D. The description for the group is not provided.
【单选题】
A new vApp was built and tested in the corporate headquarters datacenter running vSphere 6.x. What condition would explain why the virtual machine is failing to boot in an offsite datacenter running on vSphere 5.5?___
A. The virtual machine was built with the default hardware version.
B. The VMFS 5 datastore is not compatible with virtual machines configured with vSphere 6.x.
C. a
D. RS 5.5 cluster cannot run virtual machines configured with vSphere 6.x.
【单选题】
An administrator is evaluating whether to deploy vCenter Server on a Windows server or on a vCenter Server appliance. The administrator has the following requirements: <A web browser will be utilized to manage the vSphere environment.> <16 ESXi hosts will be deployed.> <Licenses must be shared with a vCenter Server at another site.> <An external Oracle 10g database server will be used to host the vCenter Server database.> Why will the administrator need to deploy vCenter Server on a Windows server?___
A. Linked Mode is a requirement for the solution.
B. Oracle 10g is a requirement for the solution.
C. The vSphere web client is a requirement for the solution.
D. Management of more than 5 hosts is a requirement for the solution.
【单选题】
What is a benefit of using VMware Data Protection ?___
A. Provides support for guest-level backups and restores of Microsoft SQL Servers, Exchange Servers, and Share Point Servers.
B. Provides support for advanced storage services including replication, encryption, deduplication, and compression.
C. Provides direct access to VDP configuration integrated into the vSphere Client.
D. Reduces disk space consumed by virtual machine data using deduplication.
【单选题】
An administrator enables vSphere High Availability (HA) on an existing cluster with a large number of hosts and virtual machines. The administrator notices that the setup of vSphere HA on some of the hosts is failing. What step, if taken, might resolve this issue?___
A. Increase the value of the config.vpxd.das.electionWaitTimeSec setting.
B. Set the value of vpxd.das.aamMemoryLimit to 256.
C. Set the value of the das.useDefaultIsolationAddress setting to False.
D. Increase the value of the das.iostatsinterval setting.
【单选题】
An ESXi 6.x host consists of 24 logical cores. Hyperthreading is enabled on the host. What is the maximum number of vCPUs that can be assigned to a virtual machine on this host?___
【单选题】
By default, each ESXi 6.x host is provisioned with a certificate from which root certificate authority?___
A. RedHat Certificate Authority
B. VMware Certificate Authority
C. DigiCert Certificate Authority
D. Verisign Certificate Authority
【单选题】
An administrator is adding an NFS datastore as shown in the Exhibit. What is the purpose of the Servers to be added list?___
A. It contains the IP addresses of the NFS Storage Server to provide multipathing capability.
B. It contains the IP addresses of the ESXi hosts that mount the datastore.
C. It contains the IP addresses used for
D. ynamic Discovery of targets.
【单选题】
An administrator reports that the System Event log data is only available for 24 hours when reviewing the Hardware Status tab. Which condition could be responsible for the loss of data?___
A. A Reset event log was executed.
B. The statistical collection level was set to a value of 1.
C. The boot disk of the host is corrupt.
D. Syslog has been configured at the vCenter Server level.
【单选题】
During an upgrade, the ESXi 6.x installer finds an existing version of ESXi and a VMFS3 volume. No virtual machines exist on the host or VMFS3 volume. The requirement is to upgrade to VMFS5. Which option should be chosen to meet this requirement?___
A. Upgrade ESXi and preserve the VMFS datastore
B. Install ESXi and preserve the VMFS datastore
C. Install ESXi and overwrite the VMFS datastore
D. Upgrade
E. SXi and overwrite the VMFS datastore
【单选题】
A vSphere 6.x Standard Switch is configured with 4 virtual machine portgroups, as shown in the exhibit. Which portgroup would be utilized by default when creating a new virtual machine?___
A. Access Network
B. DMZ Network
C. VM Network
D. Virtual Machine Network
【单选题】
Which vSphere 6.x feature will allow an organization to utilize native snapshots?___
A. Virtual Volumes
B. Virtual SAN
C. VMFS3
D. VMFS5
【单选题】
An administrator is creating a new vSphere Distributed Switch that will be utilized with a specific vSphere Cluster. The cluster itself contains a mix of ESXi 5.x and 6.x Hosts. Which Distributed Switch version should be created to support this configuration?___
A. Distributed Switch: 6.0.0
B. Distributed Switch: 5.0.0
C. Distributed Switch: 5.1.0
D. Distributed Switch: 5.5.0
【单选题】
Which load balancing policy, previously limited to vSphere Distributed Switches, is now available on vSphere Standard Switches with vSphere 6.x?___
A. Route based on physical NIC workload
B. Route based on IP Hash
C. Route based on the originating virtual port
D. Route based on Source MAC Hash
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
An administrator has just completed performing an interactive installation of ESXi 6.x and is booting the host. How is the network initially configured?___
A. The network is configured by Automatic Private IP Addressing (APIPA).
B. The network is configured based on the settings detected in DNS.
C. The network is configured with the address as specified in the installer.
D. The network is automatically configured by DHCP.
【单选题】
You have just installed an ESXi 6.x Host. As part of your company security regulations, a security banner must be presented on the console of the host. How can this action be accomplished?___
A. Configure the Advanced Settings > Annotations screen of the ESXi host.
B. This is configured from the Direct Console User Interface configuration menu.
C. It is not possible to configure a security banner for the ESXi host.
D. From vCenter Server, this setting is configured globally in the vCenter Server configuration.
【单选题】
An administrator is only able to see the Health Badge when using the vRealize Operations user interface. What is the likely cause of this behavior?___
A. The vRealize Operations Foundation License is in use.
B. The vmware-sps service failed to start.
C. The vRealize Operations Standard License is in use.
D. The vmware-rbd-watchdog service failed to start.
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets either of these conditions: <High virtual CPU> <High active memory consumption.> <The alarm is only triggering when both of the conditions are met.> What can be done to correct the alarm behavior?___
A. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory and link them together with ESXCLI.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is attempting to restore a number of files in a directory within the Operating System of a virtual machine. How can the administrator restore the files from a previous backup? ___
A. Use the File Level Restore option from the selected backup of the virtual machine in the vSphere Web Client.
B. Connect to the File Level Restore tool from a web browser in the virtual machine.
C. Connect to the File Level Restore tool from the VMware
D. ata Protection appliance.
【单选题】
After selecting an object in vRealize Operations, how can a user compare the badge values of related child objects? ___
A. Use the Scoreboard tab
B. Use the Relationship tab
C. Use the Members tab
D. Use the Overview tab
【单选题】
You want to deploy a vApp and dynamically assign IP addresses without a DHCP server on the network. Which action would you take to accomplish this task? ___
A. Enable IP pools.
B. Configure a local DHCP server in the vApp.
C. Enable NAT on the vApp router.
D. Configure the guest OS for workgroup and WINS.
【单选题】
What is the optimal configuration when building a virtual machine for a single-threaded Windows application? ___
A. Deploy single-threaded applications on uniprocessor virtual machines.
B. Deploy single-threaded applications on symmetric multi-processor virtual machines.
C. Tune single-threaded applications to take advantage of symmetric multi-processor resources.
D. Tune Single-threaded applications at the hypervisor level.
【单选题】
An administrator has created the resource pool configuration shown in the Exhibit. Based on the exhibit, which virtual machine(s) can be successfully powered on? ___
A. VM-M1 only
B. VM-K1 only
C. VM-K1 and VM-K2 only
D. VM-K1, VM-K2, and VM-M1
【单选题】
Which vSphere 6 Enterprise Edition feature will allow an organization to ensure that critical multi-threaded applications have the maximum possible uptime? ___
A. Fault Tolerance
B. High Availability
C. Distributed Resource Scheduler
D. App HA
【单选题】
An administrator has a virtual machine that requires four times the compute resources than other virtual machines on the same ESXi 6.x host. How should the administrator configure the virtual machine settings, in order to be prepared for any resource contention? ___
A. Set the shares of the priority virtual machine to High and the rest to Low.
B. Set the shares of the priority virtual machine to High.
C. Set the shares of the priority virtual machine to High and the rest to Normal.
D. Set the shares of the priority virtual machine to Normal and the rest to Low.
推荐试题
【单选题】
将钢加热到A1以下,一般为___ ℃,保温一段时间,然后缓慢冷却(一般随炉冷),以消除残余应力的热处理工艺,称为消除应力退火
A. 600—650
B. 450—500
C. 350—400
D. 250—300
【单选题】
金属材料传导热量的性能称为导热性,___的导热性能最好
【单选题】
碳素钢的分类中,按钢中 ___的质量分数来分是方法之一
A. A、铁
B. B、碳
C. C、硅
D. D、锰
【单选题】
碳素结构钢的牌号采用代表屈服点的字母“Q”、屈服点的数值和质量等级、___等符号来表示
A. 脱氧方式
B. 脱硫方式
C. 脱氢方式
D. 脱磷方式
【单选题】
优质碳素结构钢的牌号用二位阿拉伯数字和规定符号表示,阿拉伯数字表示碳的质量分数的___(以万分之几计)
A. 最小值
B. 最大值
C. 平均值
D. 实际值
【单选题】
合金钢中,合金元素的质量分数的总和___的钢称为中合金钢
A. ≤5%
B. 5%~10%
C. ≥10%
D. ≥5%
【单选题】
珠光体耐热钢是以铬钼为基础的具有高温强度和抗氧化性的___
A. 优质碳素结构钢
B. 高合金钢
C. 中合金钢
D. 低合金钢
【单选题】
凡电流的___变化,就叫做脉动直流电流
A. 方向和大小都不随时间
B. 方向和大小都随时间
C. 方向变化而大小不随时间
D. 方向不变而大小随时间
【单选题】
在一段无源电路中,___与电压成正比,而与电阻值成反比,这就是部分电路的欧姆定律
A. 电位的大小
B. 电流的大小
C. 电容的大小
D. 电势的大小
【单选题】
导体电阻的大小与导体的导电性能即电阻率及导体的长度成正比,而与导体的___
A. 体积成反比
B. 体积成正比
C. 截面积成正比
D. 截面积成反比
【单选题】
电流磁场的方向是由___决定的,实践表明可用“右手螺旋法则”来表示两者的关系
A. 电流方向
B. 磁场方向
C. 磁力方向
D. 电流受力方向
【单选题】
镍的元素符号是___
A. A.Nb
B. B.Ni
C. C.Si
D. D.NA、
【单选题】
___的来源是由金属及非金属物质在过热条件下产生的高温蒸气经氧化、冷凝而形成的
A. 熔池金属
B. 焊接烟尘
C. 有毒气体
D. 焊接弧光
E. 液态熔滴
【单选题】
眼睛离电弧___,如无防护,经10几秒甚至几秒的紫外线照射,就可能产生电光性眼炎
A. 2m以内
B. 1.5m以内
C. 1m以内
D. 0.5m以内
【单选题】
电光性眼炎的发病要经过一定的潜伏期,一般发病在受照后___
A. 半个小时后
B. 1个小时后
C. 4个小时后
D. 6~8小时后
E. 12~14小时后
【单选题】
焊工在有积水的地面焊接、切割时,应穿经过___耐压试验合格的防水橡胶鞋
A. 4000V
B. 5000V
C. 6000V
D. 7000V
【单选题】
焊接场地应保持必要的通道,车辆通道宽度应不小于___ m
【单选题】
焊接场地应保持必要的通道,人行通道宽度应不小于 ___ m
A. 4.5米
B. 3.5米
C. 2.5米
D. 1.5米
【单选题】
焊工应有足够的作业面积,作业面积应不小于___m2
【单选题】
下列选项中, ___不是焊条药皮的组成物
A. 脱氧剂
B. 脱氮剂
C. 造渣剂
D. 稳弧剂
【单选题】
沉淀脱氧是焊接过程中脱氧的主要方式,一般都采用___脱氧
A. 锰、铝联合
B. 锰、钼联合
C. 钛、钙联合
D. 锰、硅联合
【单选题】
CO2焊用的CO2气体纯度,一般要求不低于___
A. 99.5%
B. 99.9%
C. 99.95%
D. 99.99%
【单选题】
___是一种理想的不熔化极氩弧焊的电极材料,也是我国目前建议尽量采用的钨极
A. 纯钨极
B. 钍钨极
C. 铈钨极
D. 锆钨极
【单选题】
钨极的一端常涂有颜色,以便识别,铈钨极为___色
【单选题】
采用碱性焊条,焊前应在坡口及两侧各___ mm范围内,将锈、水、油污等清理干净
A. 5~10
B. 15~20
C. 25~30
D. 35~40
【单选题】
焊接___时,不得进行预热
A. 铬镍奥氏体不锈钢
B. 铬钼珠光体耐热钢
C. 中碳钢管
D. 低合金高强度结构钢
【单选题】
___不是影响是否需要预热及预热温度的因素
A. 钢材化学成分
B. 结构刚度
C. 焊接方法
D. 接头型式
【单选题】
焊前预热一般要求在坡口两侧各 ___ mm范围内保持均热
A. 75—100
B. 100—150
C. 150—200
D. 200--300
【单选题】
MZ1—1000型焊机是一种___ 自动埋弧焊机
A. 等速送丝式
B. 均匀调节式
C. 两者都不对
【单选题】
___是一种自动埋弧焊常用的引弧方法
A. 高频高压引弧法
B. 高压脉冲引弧法
C. 不接触引弧法
D. 尖焊丝引弧法
【单选题】
氩弧焊机供气系统没有 ___
A. 减压器
B. 气体流量计
C. 干燥器
D. 电磁气阀
【单选题】
CO2气瓶瓶体表面漆成___色,并漆有“液态二氧化碳”黑色字样
【单选题】
焊条电弧焊Y形坡口的坡口角度一般为___
A. 30°
B. 60°
C. 80°
D. 90°
【单选题】
焊条电弧焊立焊操作时,发现椭圆形熔池下部边缘由比较平直轮廓变成鼓肚变圆时,表示熔池温度___
【单选题】
与焊条电弧焊相比, ___不是自动埋弧焊的优点
A. 生产率高
B. 对气孔敏感小
C. 节约焊接材料和电能
D. 焊工劳动条件好
【单选题】
与焊条电弧焊相比,___不是自动埋弧焊的缺点
A. 不适合焊接薄板
B. 对气孔敏感性较大
C. 辅助准备工作量大
D. 焊工劳动强度大
【单选题】
埋弧焊不适用于焊接___
A. 钛及钛合金
B. 镍合金
C. 奥氏体不锈钢
D. 调质钢
【单选题】
焊缝成形系数和熔合比数值大小主要取决于___
A. 电流种类与极性
B. 焊工操作技术
C. 焊接工艺参数
D. 接头形式
【单选题】
___不是埋弧自动焊最主要的工艺参数
A. 焊接电流
B. 电弧电压
C. 焊接速度
D. 焊丝伸出长度