【单选题】
Which vSphere 6.x feature will allow an organization to utilize native snapshots?___
A. Virtual Volumes
B. Virtual SAN
C. VMFS3
D. VMFS5
查看试卷，进入试卷练习
微信扫一扫，开始刷题
相关试题
【单选题】
An administrator is creating a new vSphere Distributed Switch that will be utilized with a specific vSphere Cluster. The cluster itself contains a mix of ESXi 5.x and 6.x Hosts. Which Distributed Switch version should be created to support this configuration?___
A. Distributed Switch: 6.0.0
B. Distributed Switch: 5.0.0
C. Distributed Switch: 5.1.0
D. Distributed Switch: 5.5.0
【单选题】
Which load balancing policy, previously limited to vSphere Distributed Switches, is now available on vSphere Standard Switches with vSphere 6.x?___
A. Route based on physical NIC workload
B. Route based on IP Hash
C. Route based on the originating virtual port
D. Route based on Source MAC Hash
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
An administrator has just completed performing an interactive installation of ESXi 6.x and is booting the host. How is the network initially configured?___
A. The network is configured by Automatic Private IP Addressing (APIPA).
B. The network is configured based on the settings detected in DNS.
C. The network is configured with the address as specified in the installer.
D. The network is automatically configured by DHCP.
【单选题】
You have just installed an ESXi 6.x Host. As part of your company security regulations, a security banner must be presented on the console of the host. How can this action be accomplished?___
A. Configure the Advanced Settings > Annotations screen of the ESXi host.
B. This is configured from the Direct Console User Interface configuration menu.
C. It is not possible to configure a security banner for the ESXi host.
D. From vCenter Server, this setting is configured globally in the vCenter Server configuration.
【单选题】
An administrator is only able to see the Health Badge when using the vRealize Operations user interface. What is the likely cause of this behavior?___
A. The vRealize Operations Foundation License is in use.
B. The vmware-sps service failed to start.
C. The vRealize Operations Standard License is in use.
D. The vmware-rbd-watchdog service failed to start.
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets either of these conditions: <High virtual CPU> <High active memory consumption.> <The alarm is only triggering when both of the conditions are met.> What can be done to correct the alarm behavior?___
A. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory and link them together with ESXCLI.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is attempting to restore a number of files in a directory within the Operating System of a virtual machine. How can the administrator restore the files from a previous backup? ___
A. Use the File Level Restore option from the selected backup of the virtual machine in the vSphere Web Client.
B. Connect to the File Level Restore tool from a web browser in the virtual machine.
C. Connect to the File Level Restore tool from the VMware
D. ata Protection appliance.
【单选题】
After selecting an object in vRealize Operations, how can a user compare the badge values of related child objects? ___
A. Use the Scoreboard tab
B. Use the Relationship tab
C. Use the Members tab
D. Use the Overview tab
【单选题】
You want to deploy a vApp and dynamically assign IP addresses without a DHCP server on the network. Which action would you take to accomplish this task? ___
A. Enable IP pools.
B. Configure a local DHCP server in the vApp.
C. Enable NAT on the vApp router.
D. Configure the guest OS for workgroup and WINS.
【单选题】
What is the optimal configuration when building a virtual machine for a single-threaded Windows application? ___
A. Deploy single-threaded applications on uniprocessor virtual machines.
B. Deploy single-threaded applications on symmetric multi-processor virtual machines.
C. Tune single-threaded applications to take advantage of symmetric multi-processor resources.
D. Tune Single-threaded applications at the hypervisor level.
【单选题】
An administrator has created the resource pool configuration shown in the Exhibit. Based on the exhibit, which virtual machine(s) can be successfully powered on? ___
A. VM-M1 only
B. VM-K1 only
C. VM-K1 and VM-K2 only
D. VM-K1, VM-K2, and VM-M1
【单选题】
Which vSphere 6 Enterprise Edition feature will allow an organization to ensure that critical multi-threaded applications have the maximum possible uptime? ___
A. Fault Tolerance
B. High Availability
C. Distributed Resource Scheduler
D. App HA
【单选题】
An administrator has a virtual machine that requires four times the compute resources than other virtual machines on the same ESXi 6.x host. How should the administrator configure the virtual machine settings, in order to be prepared for any resource contention? ___
A. Set the shares of the priority virtual machine to High and the rest to Low.
B. Set the shares of the priority virtual machine to High.
C. Set the shares of the priority virtual machine to High and the rest to Normal.
D. Set the shares of the priority virtual machine to Normal and the rest to Low.
【单选题】
Which type of Adapter does not require vmkernel networking? ___
A. Independent Hardware iSCSI Adapter
B. Dependent Hardware iSCSI Adapter
C. Software iSCSI Adapter
D. Software FCoE Adapter
【单选题】
During the installation of ESXi 6.0, the following error message is reported: Hardware Virtualization is not a feature of the CPU, or is not enabled in the BIOS. Which condition would generate this message? ___
A. LAHF/SAHF is not enabled in the BIOS.
B. NX/XD is not enabled in the BIOS.
C. SSE3 is not enabled in the BIOS.
D. Hyperthreading is not enabled in the BIOS.
【单选题】
An administrator is unable to login to vCenter Server when using the vSphere web client. The administrator successfully accessed vCenter Server using the client earlier the same day. What is the most appropriate first step the administrator should take to resolve this issue? ___
A. Verify the web browser being used has Adobe Flash plugin version 11.5 or later
B. Verify the vCenter Single Sign-On service is running on the vCenter Server
C. Verify the vSphere Web Server service is running on the vCenter Server
D. Verify the administrator has permissions configured in vCenter Server
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets two conditions: <high virtual CPU> <high active memory consumption> The alarm is malfunctioning and triggering when either condition is met instead of both. What can be done to correct the issue? ___
A. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
What must be enabled to ensure that VM Component Protection (VMCP) works in a High Availability cluster? ___
A. VMware Tools Virtual Machine Communication Interface (VMCI)
B. Fault Tolerance
C. Atomic Test and Set (ATS)
D. All Paths Down (APD) Timeout
【单选题】
An administrator wants to add a web server to an existing multi-tier application consisting of three virtual machines: <A web server> <A database server An application server> The web server should be added to the application when the primary web server reaches: <70% vCPU utilization> <55% active memory> Which option will achieve this result? ___
A. Create a virtual machine alarm with an action to run a script that starts a new instance of the web server.
B. Create a host cpu and memory alarm with an action to run a script that starts a new instance of the webserver.
C. Configure HA application monitoring for the web server and set it to trigger deployment of a new instance of the web server.
D. Configure Fault Tolerance on the virtual machine and leave the secondary machine disabled until needed.
【单选题】
An administrator has an application that requires connection directly to PCI devices through a virtual machine. What is a limitation of this configuration? ___
A. Devices must be reserved for PCI passthrough on at least one host on which the virtual machine will run.
B. Snapshots are not supported with DirectPath I/O passthrough devices.
C. A maximum of 18 PCI vSphere
D. irectPath devices can be added to a virtual machine.
【单选题】
The vSphere administrator is configuring directory services for an ESXi host: What should the vSphere administrator do to configure the host to use CAM services? ___
A. Check the Use vSphere Authentication Proxy checkbox.
B. Set Select Directory Service Type to CAM services.
C. Specify CAM$ for the
D. omain.
【单选题】
Which statement is true regarding the licensing of vCenter Server? ___
A. The license for vCenter Server must be provided at the time of installation.
B. Changing the license assigned to vCenter Server requires a restart of the vCenter Server service.
C. Virtual machines can still be powered on if the vCenter Server license expires.
D. Licensing for a single vCenter Server installation is determined by the number of managed virtual machines.
【单选题】
When configuring vSphere Replication for a virtual machine, what is the lowest Recovery Point Objective (RPO) that can be selected? ___
A. 1 min
B. 5 min
C. 10 min
D. 15min
【单选题】
A developer needs to create a multi-tier development stack for a home lab. Which vSphere product will support the architecture required for the least software cost? ___
A. vSphere Hypervisor
B. vSphere Essentials
C. VMware Player
D. VMware Workstation
【单选题】
An administrator is installing Windows into a virtual machine. The DVD has been mounted on the Host and configured for the virtual machine as shown in the Exhibit. Based on the exhibit, when the virtual machine is booted, why would it attempt to search for a PXE server? ___
A. The CD/DVD device is not connected.
B. The ISO is in the incorrect storage location.
C. The OS minimum requirements have not been met.
D. The CD/DVD device is not set to Client Device.
【单选题】
What component must be installed prior to deploying a vCenter Server in vSphere 6.x? ___
A. vCenter Identity Services
B. Platform Services Controller
C. vCenter Single Sign-On
D. Client Integration Plug-In
【单选题】
What is a valid plug-in status for a plug-in that has been added to a vSphere client? ___
A. Disabled
B. Unknown
C. Stopped
D. Installed
【单选题】
Users of an application are reporting performance issues. The following performance values are observed in the vSphere Web Client: <Host CPU utilization is 90%> <Virtual Machine memory utilization is consistently greater than 90% CPU Ready values are higher than 20%> What could be the cause of the application performance issue? ___
A. The host is lacking the CPU resources required to meet the demand.
B. The host is lacking the memory resources required to meet the demand.
C. The virtual machine is lacking the CPU resources required to meet the demand.
D. The virtual machine is lacking the memory resources required to meet the demand.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is re-provisioning an ESXi host and moving it to another datacenter. Which DCUI option should the administrator use to revert the system configuration to the default settings? ___
A. Reset System Configuration
B. Rebuild Default System Configuration
C. Revert System Configuration
D. Renew Default System Configuration
【单选题】
An administrator has just completed installing an ESXi 6.x host, but doesn't know what address has been configured. Where is the ESXi host IP address configured? ___
A. RVC console
B. Direct Console User Interface
C. vSphere Web Client
D. vSphere Client
【单选题】
When is it possible to place a VMFS5 datastore in maintenance mode? ___
A. When it is a member of a Storage DRS cluster
B. When it is a member of Virtual SAN cluster
C. When it is a member of a multi-extent datastore
D. When it is a member of a Virtual Volume
【单选题】
Immediately after installing ESXi, an administrator observes that the Configure Lockdown Mode option is grayed out in the Direct Console User Interface (DCUI). What is the most likely explanation? ___
A. The host has not yet been added to a vCenter Server.
B. The BIOS on the host does not have NX/XD enabled.
C. The ESXi host is running in evaluation mode.
D. The host requires a reboot before this feature is available.
【单选题】
Immediately after installing ESXi, an administrator observes that the Configure Lockdown Mode option is grayed out in the Direct Console User Interface (DCUI). What is the most likely explanation? ___
A. The host has not yet been added to a vCenter Server.
B. The BIOS on the host does not have NX/XD enabled.
C. The ESXi host is running in evaluation mode.
D. The host requires a reboot before this feature is available.
【单选题】
Which Single Sign-On deployment mode should an administrator use for two 6.x vCenter Servers configured with linked mode? ___
A. Basic Single Sign-On with vCenter Server Heartbeat
B. Multisite Single Sign-On
C. Basic Single Sign-On
D. Single Sign-On with Linked Mode
【单选题】
What is required when changing a virtual machine name using the vSphere Web Client? ___
A. Verify connectivity to the ESXi host where the virtual machine is running and its inventory list is accessible.
B. Verify in which datastore the virtual machine resides and that you have access and its inventory list is accessible.
C. Verify that virtual machine files are stored in the same datastore and can be accessed in the datastore browser list.
D. Verify the virtual machine is not running in Fault Tolerant mode and that it is not in a Distributed Resource Scheduler cluster.
【单选题】
An administrator deploys vRealize Operations into a vSphere 6.x environment. After the deployment, the administrator notices that badges are not appearing. What is a likely cause of this behavior? ___
A. Badges do not appear until you register vRealize Operations with vCenter Server.
B. Badges do not appear until you register a vCenter Server in vRealize Operations.
C. The vRealize Operations appliance needs to be redeployed.
D. The vCenter Server appliance needs to be redeployed.
推荐试题
【多选题】
灭火器的设置要求有___ ？[多选题]
A. 应设在便于人们取用的地点
B. 应设置在明显的地点
C. 应设置稳固
D. 设置不得影响安全疏散
【多选题】
应设置疏散指示标志的场所和部位有___？[多选题]
A. 民用建筑和人防工程中的观众厅、展览厅、多功能厅、餐厅和商业营业厅等人员密集场所疏散路线以及疏散出口处
B. 歌舞游艺场所的疏散走道和其他主要疏散路线以及疏散出口处
C. 除二类高层居住建筑外的高层民用建筑，其走道和安全出口处
D. 所有高层民用建筑，其走道和安全出口处
【多选题】
消防机构根据本地区火灾规律、特点等消防安全需要组织监督抽查；在___应当组织监督抽查？[多选题]
A. 火灾多发季节
B. 重大节日前或者期间
C. 重大活动前或者期间
D. 夜间
【多选题】
防火门日常巡检要求包括___？[多选题]
A. 外观完好，门关闭是否完好
B. 防火门是否干净
C. 闭门器、顺序器功能是否正常
D. 防火门附近应无杂物
【多选题】
使用灭火器灭火时，人的站立位置应是___？[多选题]
【多选题】
疏散撤离时应严禁以下行为___？[多选题]
A. 使用电梯
B. 听从现场疏导人员的指挥
C. 推挤、喧哗
D. 可以不按疏导自行离开
【多选题】
对人员疏散方法的描述正确的是___ ？[多选题]
A. 做好防护，低姿撤离
B. 鱼贯地撤离
C. 自身着火，快速奔跑
D. 利用建、构筑内配备的消防救助
【多选题】
火灾报警控制器在故障状态下，对信息特征描述正确的是___。
A. 点亮“故障”指示灯，故障排除后，故障信息的指示信号需要手动清除。
B. 声响音调：发出与火警信息明显不同的故障声。
C. 显示故障总数和故障报警序号、报警时间、类型编码。
D. 主备电发生故障，发出声、光报警。
【多选题】
在火灾报警控制器上，按下“复位”键，对操作信息显示描述正确的是___。
A. 清除当前的所有火警、故障和反馈等显示。
B. 复位所有总线制被控设备和手动消防启动盘、多线制消防联动控制盘上的状态指示灯。
C. 清除正处于请求和延时请求启动的命令；清除消音状态。
D. 清除屏蔽信息。
【多选题】
在消防控制室图形显示装置(CRT)中，对于报警状态信息显示描述正确的是___。
A. 报警指示：“火警”指示为红色，可以自动清除。
B. 声响音调：发出与其它信息不同的火警声。
C. 图形显示部分对应的报警设备以红色闪烁，报警设备所在区域也以红色显示。
D. 通过查看文字信息能获得每一个火灾报警部位及相关信息。
【多选题】
在火灾报警系统中，对于手动消防盘的操作信息显示，描述正确的是___。
A. 在手动消防启动盘按下某一单元按键后，则该单元的命令灯点亮。
B. 控制器显示相应启动界面。
C. 启动命令发出10秒后没有收到反馈信号，则命令灯常亮。
D. 再次按下此键，命令灯熄灭，启动命令被终止。
【多选题】
建筑消防设施运行状态表述正确的是___
A. 建筑消防设施电源开关、管道阀门，均应指示正常运行位置，并标识开、关的状态
B. 对需要保持常开状态的阀门，应当采取铅封、标识等限位措施
C. 对有信号反馈功能的阀门，其状态信号应反馈到消防控制室
D. 因故障维修等原因需要暂时停用消防系统的，须报请单位消防安全责任人批准
【多选题】
消防电话系统由___等设备构成。
A. 广播功率放大器
B. 消防电话主机
C. 消防电话分机
D. 手动火灾报警按钮
【多选题】
在火灾报警系统中，对于消防电话分机呼叫及应答的描述，正确的是___。
A. 固定式消防电话分机摘机后或非固定式消防电话分机插入电话插孔后，即可自动呼叫消防电话主机。
B. 消防电话分机中有提示音。
C. 要应答呼入的分机，按【接通】键接通分机。
D. 若按【挂断】键，这时分机中发出忙音，表明主机不允许其呼入。
【多选题】
在火灾报警系统中，消防电话主机操作信息显示，描述正确的是___。
A. 主机或分机一方呼叫，另一方应答后，即进入通话。
B. 通话时，通话指示灯常亮。
C. “录音”指示灯闪亮。
D. 录音开启。
【多选题】
消防控制室对消防电话的控制和显示功能的描述中，正确的是___。
A. 消防控制室应能与各消防电话分机通话，并具有插入通话功能。
B. 消防控制室应能接收来自消防电话插孔的呼叫，并能通话。
C. 消防控制室应能显示消防电话的故障状态。
D. 消防控制室不需要有消防电话通话录音功能。
【多选题】
消防设施操作人员资格表述正确的是___
A. 消防设施操作人员应通过消防行业特有工种职业技能鉴定
B. 消防设施操作人员应持有相应等级的消防行业职业资格证书
C. 已取得职业资格证书的消防设施操作人员应能熟练掌握本等级职工技能
D. 消防设施操作人员只需经过单位内部的培训，就具备上岗资格
【多选题】
消防控制室管理应符合___。
A. 确保火灾自动报警控制系统处于正常工作状态
B. 确保灭火系统和其他联动控制设备处于正常工作状态
C. 不得将应处于自动状态的系统、设备等设在手动状态
D. 可以将应处于自动状态的系统、设备等设在手动状态
【多选题】
消防控制室的值班应急程序应符合___。
A. 接到火灾报警后，应以最快方式确认
B. 火灾确认后，应立即确认火灾报警联动控制开关处于自动状态
C. 拨打“119”报警
D. 应立即启动单位内部应急疏散和灭火预案，并同时报告单位负责人
【多选题】
以快捷方便为原则确定发现火灾后的报警方式，报警的对象为___
A. 119
B. 110
C. 单位值班领导
D. 消防控制中心
【多选题】
疏散通报采用___
A. 语音通报
B. 警铃通报
C. 楼层显示器
D. 疏散指示标志
【多选题】
预案演练的目的___
A. 检验预案
B. 完善准备
C. 锻炼队伍
D. 磨合机制
【多选题】
应急预案中的单位基本情况包括___
A. 单位基本概况
B. 单位地址
C. 消防安全重点部位
D. 单位简介
【多选题】
根据方便现场指挥、通信联络畅通、保证自身安全的原则，可将火场指挥部设置在___
A. 起火部位附近
B. 消防控制室
C. 部门办公室
D. 电话总机室
【多选题】
火情预想包括内容如下___
A. 重点部位与主要起火点，同一重点部位，可假设多个起火点
B. 起火物品及蔓延条件，燃烧面积（范围）和主要蔓延方向
C. 可能造成的危害和影响
D. 区分白天和夜间
【多选题】
报警时应说明以下情况___
A. 着火单位及单位具体位置
B. 着火部位、着火物资
C. 有无人员被困
D. 报警电话号码、报警姓名
【多选题】
在演练开始前要进行演练动员与培训，确保所有演练参与人员掌握___
A. 演练规则
B. 演练情景
C. 各自在演练中的任务
D. 演练地点
【判断题】
我国消防工作贯彻的方针是安全第一、预防为主
【判断题】
任何单位和成年人都有参加有组织的灭火工作的义务
【判断题】
造成3人以下死亡，或者10人以下受伤，或者1000万元以下直接经济损失的火灾事故为特别重大火灾事故
【判断题】
任何单位、个人不得损坏、挪用、擅自拆除、停用、消防设施、器材，不得埋压、圈占、遮挡、消火栓或占用防火间距
【判断题】
单位的法定代表人是企业的消防责任人，对本单位的消防工作全面负责
【判断题】
消防安全重点单位为应当每两年进行一次消防演练
【判断题】
灭火器材只要压力正常、外观不破损就可以不用进行检测维修
【判断题】
因工作需要，可以将安全出口的疏散门上锁，钥匙由值班人员保管
【判断题】
部门在日常检查中发现火灾隐患能够立即整改的立即整改，不能立即整改的可不予理会
【判断题】
常闭式防火门因经常有人进出可以处于长期开启状态
【判断题】
动用明火作业因负责审批的人员出差学习，可以在动火之后补齐审批手续
【判断题】
动用明火作业现场应配备灭火器、水源等做好灭火措施
