刷题
导入试题
【单选题】
A vSphere 6.x Standard Switch is configured with 4 virtual machine portgroups, as shown in the exhibit. Which portgroup would be utilized by default when creating a new virtual machine?___
A. Access Network
B. DMZ Network
C. VM Network
D. Virtual Machine Network
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
A
解析
暂无解析
相关试题
【单选题】
Which vSphere 6.x feature will allow an organization to utilize native snapshots?___
A. Virtual Volumes
B. Virtual SAN
C. VMFS3
D. VMFS5
【单选题】
An administrator is creating a new vSphere Distributed Switch that will be utilized with a specific vSphere Cluster. The cluster itself contains a mix of ESXi 5.x and 6.x Hosts. Which Distributed Switch version should be created to support this configuration?___
A. Distributed Switch: 6.0.0
B. Distributed Switch: 5.0.0
C. Distributed Switch: 5.1.0
D. Distributed Switch: 5.5.0
【单选题】
Which load balancing policy, previously limited to vSphere Distributed Switches, is now available on vSphere Standard Switches with vSphere 6.x?___
A. Route based on physical NIC workload
B. Route based on IP Hash
C. Route based on the originating virtual port
D. Route based on Source MAC Hash
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
An administrator has just completed performing an interactive installation of ESXi 6.x and is booting the host. How is the network initially configured?___
A. The network is configured by Automatic Private IP Addressing (APIPA).
B. The network is configured based on the settings detected in DNS.
C. The network is configured with the address as specified in the installer.
D. The network is automatically configured by DHCP.
【单选题】
You have just installed an ESXi 6.x Host. As part of your company security regulations, a security banner must be presented on the console of the host. How can this action be accomplished?___
A. Configure the Advanced Settings > Annotations screen of the ESXi host.
B. This is configured from the Direct Console User Interface configuration menu.
C. It is not possible to configure a security banner for the ESXi host.
D. From vCenter Server, this setting is configured globally in the vCenter Server configuration.
【单选题】
An administrator is only able to see the Health Badge when using the vRealize Operations user interface. What is the likely cause of this behavior?___
A. The vRealize Operations Foundation License is in use.
B. The vmware-sps service failed to start.
C. The vRealize Operations Standard License is in use.
D. The vmware-rbd-watchdog service failed to start.
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets either of these conditions: <High virtual CPU> <High active memory consumption.> <The alarm is only triggering when both of the conditions are met.> What can be done to correct the alarm behavior?___
A. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory and link them together with ESXCLI.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is attempting to restore a number of files in a directory within the Operating System of a virtual machine. How can the administrator restore the files from a previous backup? ___
A. Use the File Level Restore option from the selected backup of the virtual machine in the vSphere Web Client.
B. Connect to the File Level Restore tool from a web browser in the virtual machine.
C. Connect to the File Level Restore tool from the VMware
D. ata Protection appliance.
【单选题】
After selecting an object in vRealize Operations, how can a user compare the badge values of related child objects? ___
A. Use the Scoreboard tab
B. Use the Relationship tab
C. Use the Members tab
D. Use the Overview tab
【单选题】
You want to deploy a vApp and dynamically assign IP addresses without a DHCP server on the network. Which action would you take to accomplish this task? ___
A. Enable IP pools.
B. Configure a local DHCP server in the vApp.
C. Enable NAT on the vApp router.
D. Configure the guest OS for workgroup and WINS.
【单选题】
What is the optimal configuration when building a virtual machine for a single-threaded Windows application? ___
A. Deploy single-threaded applications on uniprocessor virtual machines.
B. Deploy single-threaded applications on symmetric multi-processor virtual machines.
C. Tune single-threaded applications to take advantage of symmetric multi-processor resources.
D. Tune Single-threaded applications at the hypervisor level.
【单选题】
An administrator has created the resource pool configuration shown in the Exhibit. Based on the exhibit, which virtual machine(s) can be successfully powered on? ___
A. VM-M1 only
B. VM-K1 only
C. VM-K1 and VM-K2 only
D. VM-K1, VM-K2, and VM-M1
【单选题】
Which vSphere 6 Enterprise Edition feature will allow an organization to ensure that critical multi-threaded applications have the maximum possible uptime? ___
A. Fault Tolerance
B. High Availability
C. Distributed Resource Scheduler
D. App HA
【单选题】
An administrator has a virtual machine that requires four times the compute resources than other virtual machines on the same ESXi 6.x host. How should the administrator configure the virtual machine settings, in order to be prepared for any resource contention? ___
A. Set the shares of the priority virtual machine to High and the rest to Low.
B. Set the shares of the priority virtual machine to High.
C. Set the shares of the priority virtual machine to High and the rest to Normal.
D. Set the shares of the priority virtual machine to Normal and the rest to Low.
【单选题】
Which type of Adapter does not require vmkernel networking? ___
A. Independent Hardware iSCSI Adapter
B. Dependent Hardware iSCSI Adapter
C. Software iSCSI Adapter
D. Software FCoE Adapter
【单选题】
During the installation of ESXi 6.0, the following error message is reported: Hardware Virtualization is not a feature of the CPU, or is not enabled in the BIOS. Which condition would generate this message? ___
A. LAHF/SAHF is not enabled in the BIOS.
B. NX/XD is not enabled in the BIOS.
C. SSE3 is not enabled in the BIOS.
D. Hyperthreading is not enabled in the BIOS.
【单选题】
An administrator is unable to login to vCenter Server when using the vSphere web client. The administrator successfully accessed vCenter Server using the client earlier the same day. What is the most appropriate first step the administrator should take to resolve this issue? ___
A. Verify the web browser being used has Adobe Flash plugin version 11.5 or later
B. Verify the vCenter Single Sign-On service is running on the vCenter Server
C. Verify the vSphere Web Server service is running on the vCenter Server
D. Verify the administrator has permissions configured in vCenter Server
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets two conditions: <high virtual CPU> <high active memory consumption> The alarm is malfunctioning and triggering when either condition is met instead of both. What can be done to correct the issue? ___
A. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
What must be enabled to ensure that VM Component Protection (VMCP) works in a High Availability cluster? ___
A. VMware Tools Virtual Machine Communication Interface (VMCI)
B. Fault Tolerance
C. Atomic Test and Set (ATS)
D. All Paths Down (APD) Timeout
【单选题】
An administrator wants to add a web server to an existing multi-tier application consisting of three virtual machines: <A web server> <A database server An application server> The web server should be added to the application when the primary web server reaches: <70% vCPU utilization> <55% active memory> Which option will achieve this result? ___
A. Create a virtual machine alarm with an action to run a script that starts a new instance of the web server.
B. Create a host cpu and memory alarm with an action to run a script that starts a new instance of the webserver.
C. Configure HA application monitoring for the web server and set it to trigger deployment of a new instance of the web server.
D. Configure Fault Tolerance on the virtual machine and leave the secondary machine disabled until needed.
【单选题】
An administrator has an application that requires connection directly to PCI devices through a virtual machine. What is a limitation of this configuration? ___
A. Devices must be reserved for PCI passthrough on at least one host on which the virtual machine will run.
B. Snapshots are not supported with DirectPath I/O passthrough devices.
C. A maximum of 18 PCI vSphere
D. irectPath devices can be added to a virtual machine.
【单选题】
The vSphere administrator is configuring directory services for an ESXi host: What should the vSphere administrator do to configure the host to use CAM services? ___
A. Check the Use vSphere Authentication Proxy checkbox.
B. Set Select Directory Service Type to CAM services.
C. Specify CAM$ for the
D. omain.
【单选题】
Which statement is true regarding the licensing of vCenter Server? ___
A. The license for vCenter Server must be provided at the time of installation.
B. Changing the license assigned to vCenter Server requires a restart of the vCenter Server service.
C. Virtual machines can still be powered on if the vCenter Server license expires.
D. Licensing for a single vCenter Server installation is determined by the number of managed virtual machines.
【单选题】
When configuring vSphere Replication for a virtual machine, what is the lowest Recovery Point Objective (RPO) that can be selected? ___
A. 1 min
B. 5 min
C. 10 min
D. 15min
【单选题】
A developer needs to create a multi-tier development stack for a home lab. Which vSphere product will support the architecture required for the least software cost? ___
A. vSphere Hypervisor
B. vSphere Essentials
C. VMware Player
D. VMware Workstation
【单选题】
An administrator is installing Windows into a virtual machine. The DVD has been mounted on the Host and configured for the virtual machine as shown in the Exhibit. Based on the exhibit, when the virtual machine is booted, why would it attempt to search for a PXE server? ___
A. The CD/DVD device is not connected.
B. The ISO is in the incorrect storage location.
C. The OS minimum requirements have not been met.
D. The CD/DVD device is not set to Client Device.
【单选题】
What component must be installed prior to deploying a vCenter Server in vSphere 6.x? ___
A. vCenter Identity Services
B. Platform Services Controller
C. vCenter Single Sign-On
D. Client Integration Plug-In
【单选题】
What is a valid plug-in status for a plug-in that has been added to a vSphere client? ___
A. Disabled
B. Unknown
C. Stopped
D. Installed
【单选题】
Users of an application are reporting performance issues. The following performance values are observed in the vSphere Web Client: <Host CPU utilization is 90%> <Virtual Machine memory utilization is consistently greater than 90% CPU Ready values are higher than 20%> What could be the cause of the application performance issue? ___
A. The host is lacking the CPU resources required to meet the demand.
B. The host is lacking the memory resources required to meet the demand.
C. The virtual machine is lacking the CPU resources required to meet the demand.
D. The virtual machine is lacking the memory resources required to meet the demand.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is re-provisioning an ESXi host and moving it to another datacenter. Which DCUI option should the administrator use to revert the system configuration to the default settings? ___
A. Reset System Configuration
B. Rebuild Default System Configuration
C. Revert System Configuration
D. Renew Default System Configuration
【单选题】
An administrator has just completed installing an ESXi 6.x host, but doesn't know what address has been configured. Where is the ESXi host IP address configured? ___
A. RVC console
B. Direct Console User Interface
C. vSphere Web Client
D. vSphere Client
【单选题】
When is it possible to place a VMFS5 datastore in maintenance mode? ___
A. When it is a member of a Storage DRS cluster
B. When it is a member of Virtual SAN cluster
C. When it is a member of a multi-extent datastore
D. When it is a member of a Virtual Volume
【单选题】
Immediately after installing ESXi, an administrator observes that the Configure Lockdown Mode option is grayed out in the Direct Console User Interface (DCUI). What is the most likely explanation? ___
A. The host has not yet been added to a vCenter Server.
B. The BIOS on the host does not have NX/XD enabled.
C. The ESXi host is running in evaluation mode.
D. The host requires a reboot before this feature is available.
【单选题】
Immediately after installing ESXi, an administrator observes that the Configure Lockdown Mode option is grayed out in the Direct Console User Interface (DCUI). What is the most likely explanation? ___
A. The host has not yet been added to a vCenter Server.
B. The BIOS on the host does not have NX/XD enabled.
C. The ESXi host is running in evaluation mode.
D. The host requires a reboot before this feature is available.
【单选题】
Which Single Sign-On deployment mode should an administrator use for two 6.x vCenter Servers configured with linked mode? ___
A. Basic Single Sign-On with vCenter Server Heartbeat
B. Multisite Single Sign-On
C. Basic Single Sign-On
D. Single Sign-On with Linked Mode
【单选题】
What is required when changing a virtual machine name using the vSphere Web Client? ___
A. Verify connectivity to the ESXi host where the virtual machine is running and its inventory list is accessible.
B. Verify in which datastore the virtual machine resides and that you have access and its inventory list is accessible.
C. Verify that virtual machine files are stored in the same datastore and can be accessed in the datastore browser list.
D. Verify the virtual machine is not running in Fault Tolerant mode and that it is not in a Distributed Resource Scheduler cluster.
推荐试题
【判断题】
直击法是在焊机开启后,先将焊条末端对准焊缝,然后稍点一下手腕,使焊条轻轻撞击零件,随即提起 2 mm~4 mm,就能使电弧引燃,开始焊接
A. 对
B. 错
【判断题】
焊缝的起头是指焊缝起焊时的操作,应该在引弧后将电弧稍微拉长,对零件起焊部位进行适当预热,并且多次往复运条,达到所需要的熔深和熔宽后再调到正常的弧长进行焊接
A. 对
B. 错
【判断题】
焊缝的收尾是指焊缝结束时的操作
A. 对
B. 错
【判断题】
焊缝的收尾操作时,应保持正常的熔池温度,做无直线运动的横摆点焊动作,逐渐填满熔池后再将电弧拉向一侧熄灭
A. 对
B. 错
【判断题】
立焊操作方便,焊缝成形条件好,容易获得优质焊缝并具有高的生产率,是最合适的位置
A. 对
B. 错
【判断题】
仰焊受熔池液态金属重力的影响,需要对焊接规范控制并采取一定的操作方法才能保证焊缝成形
A. 对
B. 错
【判断题】
一般焊件的厚度越大,选用的焊条直径 d 应越小,同时可选择较大的焊接电流,以提高工作效率
A. 对
B. 错
【判断题】
板厚在 3 mm以下时,焊条直径取值小于或等于板厚
A. 对
B. 错
【判断题】
在中厚板零件的焊接过程中,焊缝往往采用多层焊或多层多道焊完成
A. 对
B. 错
【判断题】
电弧焊机按焊接方法可分为焊条电弧焊机、埋弧焊机、CO2 气体保护焊机、钨极氩弧焊机、熔化极氩弧焊机和等离子弧焊机
A. 对
B. 错
【判断题】
电弧焊机按焊接自动化程度可分为手工电弧焊机、半自动电弧焊机和自动电弧焊机
A. 对
B. 错
【判断题】
电焊机型号BX1—300:B 表示整流弧焊机,X表示下降特性,1表示静铁芯式,300表示额定电流为300A
A. 对
B. 错
【判断题】
为满足大范围的均匀调速和送丝速度的快速响应,一般采用直流伺服电动机驱动。送丝系统有推丝式和拽丝式两种送丝方式
A. 对
B. 错
【判断题】
为了获得稳定的焊接过程,需要合理选择焊接规范参数如电流、电压及焊接速度等,并且保证参数在焊接过程中稳定
A. 对
B. 错
【判断题】
CO2 气瓶灌入的是液态 CO2,在室温下,瓶内剩余空间被汽化的 CO2 充满,饱和压力达到 20 MPa 以上
A. 对
B. 错
【判断题】
减压表用以减压和调节保护气体压力,流量计是标定和调节保护气体流量,两者联合使用,使最终焊枪输出的气体符合焊接规范要求
A. 对
B. 错
【判断题】
气体从气瓶增压输出后,流过电磁气阀,通过橡胶或塑料制软管,进入焊枪,最后由喷嘴输出,把电弧区域的空气机械排开,起到防止污染的作用
A. 对
B. 错
【判断题】
CO2 气体保护焊是一种用 CO2液体作为保护熔化极的电弧焊方法
A. 对
B. 错
【判断题】
CO2 气体保护焊主要用于焊接低碳钢及低合金高强钢,也可以用于焊接耐热钢和不锈钢,可进行自动焊及半自动焊
A. 对
B. 错
【判断题】
钨极氩弧焊是以钨棒作为电弧的一极的电弧焊方法,钨棒在电弧焊中是不熔化的,故又称不熔化极氩弧焊,简称 TIG焊
A. 对
B. 错
【判断题】
由于被惰性气体隔离,焊接区的熔化金属不会受到空气的有害作用,所以钨极氩弧焊可用以焊接易氧化的有色金属如铝、镁及其合金
A. 对
B. 错
【判断题】
埋弧焊电弧产生于堆敷了一层的焊剂下的焊丝与零件之间,受到熔化的焊剂——熔渣以及金属蒸汽形成的气泡壁所包围
A. 对
B. 错
【判断题】
相比焊条电弧焊,埋弧焊的主要优点:焊接电流和电流密度大,生产效率高,是手弧焊生产率的 50~100 倍
A. 对
B. 错
【判断题】
埋弧焊自动化水平高,但有弧光辐射,工人劳动条件不好
A. 对
B. 错
【判断题】
埋弧焊不受到焊剂敷设限制,可以用在空间位置焊缝的焊接
A. 对
B. 错
【判断题】
由于埋弧焊焊剂的成分主要是 MnO 和 SiO2 等金属及非金属氧化物,适合焊铝、钛等易氧化的金属及其合金
A. 对
B. 错
【判断题】
埋弧焊在中、厚板对接、角接接头有广泛应用,14 mm以下板材对接可以不开坡口。埋弧焊也可用于合金材料的堆焊上
A. 对
B. 错
【判断题】
等离子弧按电源供电方式不同,分为两种形式
A. 对
B. 错
【判断题】
非转移型等离子弧:电极接电源正极,喷嘴接负极,而零件不参与导电。电弧是在电极和喷嘴之间产生
A. 对
B. 错
【判断题】
转移型等离子弧: 钨极接电源负极,零件接正极,等离子弧在钨极与零件之间产生
A. 对
B. 错
【判断题】
A. 对
B. 错
【判断题】
气焊是利用气体火焰加热并熔化母体材料和焊丝的焊接方法
A. 对
B. 错
【判断题】
气焊常用于薄板的低碳钢、低合金钢、不锈钢的对接、端接,在熔点较低的铜、铝及其合金的焊接中仍有应用
A. 对
B. 错
【判断题】
中性焰是当氧气与乙炔的混合比为 1~1.2 时,燃烧充分,燃烧过后无剩余氧或乙炔,热量集中,温度可达 2050℃~2150℃
A. 对
B. 错
【判断题】
中性焰焰心是呈亮白色的圆锥体,温度较低;内焰呈暗紫色,温度最高,适用于焊接;外焰颜色从淡紫色逐渐向橙黄色变化,温度下降,热量分散
A. 对
B. 错
【判断题】
碳化焰是指当氧气与乙炔的混合比小于 1 时,部分乙炔未曾燃烧,焰心较长,呈蓝白色,温度最高达 2700℃~3000℃
A. 对
B. 错
【判断题】
氧化焰是指当氧气与乙炔的混合比大于 1.2时,燃烧过后的气体仍有过剩的氧气,焰心短而尖,内焰区氧化反应剧烈,火焰挺直发出“嘶嘶”声,温度可达 2100℃~2300℃
A. 对
B. 错
【判断题】
氧化焰由于火焰具有氧化性,焊接碳钢易产生气体,并出现熔池沸腾现象,很少用于焊接
A. 对
B. 错
【判断题】
电阻焊是将零件组合后通过电极施加压力,利用电流通过零件的接触面及临近区域产生的电阻热将其加热到熔化或塑性状态,使之形成金属结合的方法
A. 对
B. 错
【判断题】
点焊方法:将零件装配成搭接形式,用电极将零件夹紧并通以电流,在电流热作用下,电极之间零件接触处被加热熔化形成焊点
A. 对
B. 错
欢迎使用我爱刷题
×
微信搜索我爱刷题小程序
温馨提示
×
请在电脑上登陆“www.woaishuati.com”使用