相关试题
【判断题】
在机械设备中，凸轮表面误差将会引起扭转振动
【单选题】
What happens to the status of users already logged into ESXi Shell when a vSphere administrator enables lockdown mode?___
A. Users remain logged in and can run commands, except to disable lockdown mode.
B. Users remain logged in and can run commands, including disabling lockdown mode.
C. Users are immediately logged out of ESXi Shell.
D. Users are logged out after a timeout specified by the vSphere administrator.
【单选题】
What is the effective vSphere licensing level during the 60 day evaluation period?___
A. vSphere Foundation Essentials Plus
B. vSphere Standard
C. vSphere Enterprise
D. vSphere
E. nterprise Plus
【单选题】
To comply with security requirements, an administrator with a vCenter Server Appliance needs to force logoff of the vSphere web client after 10 minutes of inactivity.What should the administrator do to meet the requirement?___
A. Edit: /var/lib/vmware/vsphere-client/webclient.properties, modify session.timeout=10
B. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=600
C. Edit: /var/lib/vmware/vsphere-client/webclient.properties modify session.timeout=600
D. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=10
【单选题】
An administrator enables High Availability (HA) on a Virtual SAN cluster.Which network is used for HA Network Heatbeat configuration?___
A. The Management network.
B. The vMotion network.
C. The Virtual SAN network.
D. The Provisioning Traffic network.
【单选题】
A user wants to monitor a business-critical virtual machine to ensure that it doesn't run out of resources. What metric could be monitored in vRealize Operations to address this concern?___
A. Time Remaining badge
B. Compliance badge
C. Reclaimable Waste badge
D. Density badge
【单选题】
An administrator has recently installed a new ESXi 6.x Host, and during the configuration notices sporadic network problems. To check whether the issue occurred sometime during the configuration, the administrator would like to reset the system.How can this be accomplished in the shortest amount of time?___
A. Run the ESXi installer again and reinstall the host.
B. Select the Reset System Configuration option from the vSphere Client when connected directly to the host.
C. From the
D. irect Console User Interface, select Reset System Configuration.
【单选题】
A vApp is running out of compute resources when overall activity is high within the resource pool. At other times, everything is fine.What should be done to resolve this issue?___
A. Increase the size of the resource pool Shares.
B. Set the vApp's CPU and Memory Reservation Type to Expandable.
C. Set the vApp's CPU and Memory Limit to Unlimited.
D. Create a new resource pool with the existing hardware configuration.
【单选题】
A virtual machine has been renamed and an administrator is unable to find files with the new virtual machine name in the datastore.What is the reason for this?___
A. The names of the files on the datastore do not change.
B. The names of the files on the datastore have been corrupted.
C. The virtual machine needs to be re-added to the inventory.
D. The Distributed Resource Scheduler moved the virtual machine to another host.
【单选题】
An administrator has configured network connectivity for a new virtual machine, as shown in the Exhibit.What will occur with the network traffic of this virtual machine when communicating externally from vSwitch1?___
A. The virtual machine will communicate on both uplinks
B. The virtual machine will only communicate on vmnic1
C. The virtual machine will only communicate on vmnic2
D. The virtual machine will fail to communicate externally
【单选题】
An administrator is unable to create the first group in a new vRealize Operations environment. What is the likely cause of the problem?___
A. There are no group types defined.
B. The group is not defined in SSO.
C. There are more than 32 group types defined.
D. The description for the group is not provided.
【单选题】
A new vApp was built and tested in the corporate headquarters datacenter running vSphere 6.x. What condition would explain why the virtual machine is failing to boot in an offsite datacenter running on vSphere 5.5?___
A. The virtual machine was built with the default hardware version.
B. The VMFS 5 datastore is not compatible with virtual machines configured with vSphere 6.x.
C. a
D. RS 5.5 cluster cannot run virtual machines configured with vSphere 6.x.
【单选题】
An administrator is evaluating whether to deploy vCenter Server on a Windows server or on a vCenter Server appliance. The administrator has the following requirements: <A web browser will be utilized to manage the vSphere environment.> <16 ESXi hosts will be deployed.> <Licenses must be shared with a vCenter Server at another site.> <An external Oracle 10g database server will be used to host the vCenter Server database.> Why will the administrator need to deploy vCenter Server on a Windows server?___
A. Linked Mode is a requirement for the solution.
B. Oracle 10g is a requirement for the solution.
C. The vSphere web client is a requirement for the solution.
D. Management of more than 5 hosts is a requirement for the solution.
【单选题】
What is a benefit of using VMware Data Protection ?___
A. Provides support for guest-level backups and restores of Microsoft SQL Servers, Exchange Servers, and Share Point Servers.
B. Provides support for advanced storage services including replication, encryption, deduplication, and compression.
C. Provides direct access to VDP configuration integrated into the vSphere Client.
D. Reduces disk space consumed by virtual machine data using deduplication.
【单选题】
An administrator enables vSphere High Availability (HA) on an existing cluster with a large number of hosts and virtual machines. The administrator notices that the setup of vSphere HA on some of the hosts is failing. What step, if taken, might resolve this issue?___
A. Increase the value of the config.vpxd.das.electionWaitTimeSec setting.
B. Set the value of vpxd.das.aamMemoryLimit to 256.
C. Set the value of the das.useDefaultIsolationAddress setting to False.
D. Increase the value of the das.iostatsinterval setting.
【单选题】
An ESXi 6.x host consists of 24 logical cores. Hyperthreading is enabled on the host. What is the maximum number of vCPUs that can be assigned to a virtual machine on this host?___
【单选题】
By default, each ESXi 6.x host is provisioned with a certificate from which root certificate authority?___
A. RedHat Certificate Authority
B. VMware Certificate Authority
C. DigiCert Certificate Authority
D. Verisign Certificate Authority
【单选题】
An administrator is adding an NFS datastore as shown in the Exhibit. What is the purpose of the Servers to be added list?___
A. It contains the IP addresses of the NFS Storage Server to provide multipathing capability.
B. It contains the IP addresses of the ESXi hosts that mount the datastore.
C. It contains the IP addresses used for
D. ynamic Discovery of targets.
【单选题】
An administrator reports that the System Event log data is only available for 24 hours when reviewing the Hardware Status tab. Which condition could be responsible for the loss of data?___
A. A Reset event log was executed.
B. The statistical collection level was set to a value of 1.
C. The boot disk of the host is corrupt.
D. Syslog has been configured at the vCenter Server level.
【单选题】
During an upgrade, the ESXi 6.x installer finds an existing version of ESXi and a VMFS3 volume. No virtual machines exist on the host or VMFS3 volume. The requirement is to upgrade to VMFS5. Which option should be chosen to meet this requirement?___
A. Upgrade ESXi and preserve the VMFS datastore
B. Install ESXi and preserve the VMFS datastore
C. Install ESXi and overwrite the VMFS datastore
D. Upgrade
E. SXi and overwrite the VMFS datastore
【单选题】
A vSphere 6.x Standard Switch is configured with 4 virtual machine portgroups, as shown in the exhibit. Which portgroup would be utilized by default when creating a new virtual machine?___
A. Access Network
B. DMZ Network
C. VM Network
D. Virtual Machine Network
【单选题】
Which vSphere 6.x feature will allow an organization to utilize native snapshots?___
A. Virtual Volumes
B. Virtual SAN
C. VMFS3
D. VMFS5
【单选题】
An administrator is creating a new vSphere Distributed Switch that will be utilized with a specific vSphere Cluster. The cluster itself contains a mix of ESXi 5.x and 6.x Hosts. Which Distributed Switch version should be created to support this configuration?___
A. Distributed Switch: 6.0.0
B. Distributed Switch: 5.0.0
C. Distributed Switch: 5.1.0
D. Distributed Switch: 5.5.0
【单选题】
Which load balancing policy, previously limited to vSphere Distributed Switches, is now available on vSphere Standard Switches with vSphere 6.x?___
A. Route based on physical NIC workload
B. Route based on IP Hash
C. Route based on the originating virtual port
D. Route based on Source MAC Hash
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
An administrator has just completed performing an interactive installation of ESXi 6.x and is booting the host. How is the network initially configured?___
A. The network is configured by Automatic Private IP Addressing (APIPA).
B. The network is configured based on the settings detected in DNS.
C. The network is configured with the address as specified in the installer.
D. The network is automatically configured by DHCP.
【单选题】
You have just installed an ESXi 6.x Host. As part of your company security regulations, a security banner must be presented on the console of the host. How can this action be accomplished?___
A. Configure the Advanced Settings > Annotations screen of the ESXi host.
B. This is configured from the Direct Console User Interface configuration menu.
C. It is not possible to configure a security banner for the ESXi host.
D. From vCenter Server, this setting is configured globally in the vCenter Server configuration.
【单选题】
An administrator is only able to see the Health Badge when using the vRealize Operations user interface. What is the likely cause of this behavior?___
A. The vRealize Operations Foundation License is in use.
B. The vmware-sps service failed to start.
C. The vRealize Operations Standard License is in use.
D. The vmware-rbd-watchdog service failed to start.
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets either of these conditions: <High virtual CPU> <High active memory consumption.> <The alarm is only triggering when both of the conditions are met.> What can be done to correct the alarm behavior?___
A. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory and link them together with ESXCLI.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is attempting to restore a number of files in a directory within the Operating System of a virtual machine. How can the administrator restore the files from a previous backup? ___
A. Use the File Level Restore option from the selected backup of the virtual machine in the vSphere Web Client.
B. Connect to the File Level Restore tool from a web browser in the virtual machine.
C. Connect to the File Level Restore tool from the VMware
D. ata Protection appliance.
【单选题】
After selecting an object in vRealize Operations, how can a user compare the badge values of related child objects? ___
A. Use the Scoreboard tab
B. Use the Relationship tab
C. Use the Members tab
D. Use the Overview tab
【单选题】
You want to deploy a vApp and dynamically assign IP addresses without a DHCP server on the network. Which action would you take to accomplish this task? ___
A. Enable IP pools.
B. Configure a local DHCP server in the vApp.
C. Enable NAT on the vApp router.
D. Configure the guest OS for workgroup and WINS.
【单选题】
What is the optimal configuration when building a virtual machine for a single-threaded Windows application? ___
A. Deploy single-threaded applications on uniprocessor virtual machines.
B. Deploy single-threaded applications on symmetric multi-processor virtual machines.
C. Tune single-threaded applications to take advantage of symmetric multi-processor resources.
D. Tune Single-threaded applications at the hypervisor level.
【单选题】
An administrator has created the resource pool configuration shown in the Exhibit. Based on the exhibit, which virtual machine(s) can be successfully powered on? ___
A. VM-M1 only
B. VM-K1 only
C. VM-K1 and VM-K2 only
D. VM-K1, VM-K2, and VM-M1
【单选题】
Which vSphere 6 Enterprise Edition feature will allow an organization to ensure that critical multi-threaded applications have the maximum possible uptime? ___
A. Fault Tolerance
B. High Availability
C. Distributed Resource Scheduler
D. App HA
【单选题】
An administrator has a virtual machine that requires four times the compute resources than other virtual machines on the same ESXi 6.x host. How should the administrator configure the virtual machine settings, in order to be prepared for any resource contention? ___
A. Set the shares of the priority virtual machine to High and the rest to Low.
B. Set the shares of the priority virtual machine to High.
C. Set the shares of the priority virtual machine to High and the rest to Normal.
D. Set the shares of the priority virtual machine to Normal and the rest to Low.
【单选题】
Which type of Adapter does not require vmkernel networking? ___
A. Independent Hardware iSCSI Adapter
B. Dependent Hardware iSCSI Adapter
C. Software iSCSI Adapter
D. Software FCoE Adapter
【单选题】
During the installation of ESXi 6.0, the following error message is reported: Hardware Virtualization is not a feature of the CPU, or is not enabled in the BIOS. Which condition would generate this message? ___
A. LAHF/SAHF is not enabled in the BIOS.
B. NX/XD is not enabled in the BIOS.
C. SSE3 is not enabled in the BIOS.
D. Hyperthreading is not enabled in the BIOS.
推荐试题
【单选题】
"在成本管理信息（V5.0）系统中，编制责任成本预算时，责任成本预算数量：取自___。
A. 总控数量
B. 施工图数量
C. 中标清单数量
D. 物资总计划数量"
【单选题】
"在成本管理信息（V5.0）系统中，企业定额挂接后，调整组价明细，该调组价明细会变成___色，起到提醒的作用。
【单选题】
"在成本管理信息（V5.0）系统中，下列责任成本预算组成，需要先发起流程审批的是___。
A. 合同清单项目费
B. 临时工程费
C. 机械费和周转料费
D. 现场经费和其他"
【单选题】
"在成本管理信息（V5.0）系统中，流任务程发布成功后，执行暂停操作，可让这个流程不再向前执行，直到【恢复】为止。选中一条流程，点击左上的红色___按钮，即可挂起当前流程。
A. 恢复
B. 撤销
C. 暂停
D. 重新发起"
【单选题】
"在成本管理信息（V5.0）系统中，设置权限时，系统会为职责设定一些默认的基本操作功能权限，这些权限是___删除的。其它手动添加的功能权限可以删除。
A. 大部分能
B. 能
C. 不能
D. 大部分不能"
【单选题】
"成本管理信息系统V5.0具有“任务办理时限”的机制，即要求在规定时间内完成审批任务。超出“任务办理时限”的任务，则会列入___中。
A. 预警任务表
B. 督办任务表
C. 滞后任务表
D. 超时任务表"
【单选题】
"在成本管理信息（V5.0）系统中，材料结算审批单中，结算类型分为：有合同结算和___。
A. 无合同结算
B. 二三项料结算
C. 网购材料结算
D. 主要材料结算"
【单选题】
"在成本管理信息（V5.0）系统中，下列流程属于非流程任务表单的是___。
A. 劳务合同评审
B. 清单分解审批
C. 业主合同登记
D. 债务集中支付"
【单选题】
"在成本管理信息（V5.0）系统中，在客户端完成补充合同清单录入后，点击保存、上传，在网页端发起___流程。
A. 合同清单修正
B. 合同清单审批
C. 补充合同清单修正
D. 补充合同清单审批"
【单选题】
"在成本管理信息（V5.0）系统中，合同价款分劈初始审批未审批完成，不允许发起补充审批流程，合同价款分劈补充审批流程可以发起___次。
A. 一次
B. 二次
C. 多次
D. 不需要审批"
【单选题】
"成本管理信息系统升级到V5.0后，能够实现四个快速，以下不属于的是___。
A. 标前成本快测功能
B. 责任成本预算快速编
C. 项目成本快速预警
D. 各项台账快速更新。
【单选题】
"成本管理信息系统V5.0开发了移动APP，以下关于移动APP说法错误的是___。
A. ，可以进行劳务合同的审批。
B. 有联系人功能。
C. 可以审批劳务结算。
D. 可以审批清单分解"
【单选题】
"在成本管理信息（V5.0）系统中，项目可按___发起内部验工计价章节汇总表。
A. 月度
B. 季度
C. 年度
D. 以上都可以。"
【单选题】
"在成本管理信息（V5.0）系统中，项目部在编制物资计划的时候物资库中没有的物资可以进行新增，新增后的物资经由 ___审核后可以使用。
A. 公司技术中心
B. 公司工管中心
C. 公司物设部
D. 管理员。"
【单选题】
"在成本管理管理信息（V5.0）系统中，系统主要涉及的业务部门有 ___。
A. 工程部
B. 所有成本相关部门
C. 工经部
D. 物机部"
【单选题】
"在成本管理信息（V5.0）系统中，临时工程预算审批一个项目部可以发起 ___ 次 。
【单选题】
"在成本管理信息（V5.0）系统中，机械配置方案中___，按照摊销计算成本。
A. 租赁机械
B. 调拨机械
C. 自有机械
D. 其他机械"
【单选题】
"在成本管理信息（V5.0）系统中，项目在发起责任成本计价时，完成数据录入后，汇总表数据是通过以下哪种操作才能实现数据的显示___。
A. 计算以上合计
B. 计算合计
C. 计算汇总
D. 保存和上传"
【单选题】
"在成本管理信息（V5.0）系统中，责任成本计价中合同内明细表中的折算数量是由系统自动加载出，该数据取自一下那个数据___。
A. 业主验工计价
B. 内部验工计价
C. 收方结算数量折算数量
D. 劳务结算数量折算数量"
【单选题】
"在成本管理信息（V5.0）系统中，进行清单分解时，新增清单分解的方式包括___ 。
A. 自由分解
B. 从企业定额中选取
C. 自由分解和从企业定额中选取
D. 复制原清单项目"
【单选题】
"在成本管理信息（V5.0）系统中，在劳务管理模块中，发布劳务合同审批流程，加载出合同评审表后，合同文件通过以下哪种方式录入___
A. 自行上传
B. 选取内置合同文本
C. 自行上传或选取内置文本
D. 不需要上传"
【单选题】
"在成本管理信息（V5.0）系统中，在劳务管理模块中，发布劳务合同审批流程，加载出合同评审表后，合同文件需选用系统内置的合同文本，但是当同类型的合同文本存在多个时如何选择。___
A. 可以随意选用
B. 优先选用局文本
C. 可以选用公司文本
D. 优选选用公司文本"
【单选题】
"在成本管理信息（V5.0）系统中，在劳务管理模块中，发布劳务合同审批流程，加载出合同评审表后，合同细目中当劳务分包单价大于限价时，在劳务合同审批时，单价显示为___字体，以示预警。
【单选题】
"在成本管理信息（V5.0）系统中，以下关于已完工程验收单说法错误的是。___
A. 已完工程验收单是劳务结算的前置流程
B. 已完工程验收单在主材核算流程未发起前可以发起多次
C. 已完工程验收单在主材核算流程发起后还可以多次发起，主材核算的数据随之调整。
D. 已完工程验收单中的开累收方数量不得超合同签订的数量。"
【单选题】
"在成本管理信息（V5.0）系统中，主材开累超耗核算表在系统中属于劳务管理，实际操作中是由哪一个部门来负责___ 。
A. 项目工程部
B. 项目工经部
C. 项目物机部
D. 项目财务部"
【单选题】
"在成本管理信息（V5.0）系统中，分包结算表中___是财务最高可支付金额。
A. 结算金额
B. 开累价税合计金额
C. 暂定合同价
D. 价税合计金额"
【单选题】
"在成本管理信息（V5.0）系统中，分包结算表中的调价补差列，下列说法正确的是。___
A. 该列数据可以随填写数据
B. 当线上和线下数据不一致时通过该列来调整
C. 当签订补充合同时对主合同的单价进行调整时计算
D. 当签订补充合同时对主合同的单价进行调整并勾选已结算数量补差时系统自动结算的数据。"
【单选题】
"在成本管理信息（V5.0）系统中，物资结算数量不能超。___
A. 收方数量
B. 进场数量
C. 合同数量
D. 设计数量"
【单选题】
"在成本管理信息（V5.0）系统中，二三项料采购合同的单位可以按___来填。
【单选题】
"在成本管理信息（V5.0）系统中，辅助材料采购合同：进场数量不能超过。___
A. 收方数量
B. 进场数量
C. 合同数量
D. 设计数量
【单选题】
"在成本管理信息（V5.0）系统中，无合同租赁结算的结算金额不能超过___元。
A. 100
B. 500
C. 1000
D. 5000"
【单选题】
"在成本管理信息（V5.0）系统中，周转材料采购合同：进场数量不能超过___。
A. 收方数量
B. 进场数量
C. 合同数量
D. 设计数量"
【单选题】
"在成本管理信息（V5.0）系统中，现场经费全周期预算补充可以发起___次。
【单选题】
"在成本管理信息（V5.0）系统中，债务支付申请表中“公司核准”栏的数据取自劳务费用验工计价单中的哪个数据。___
A. 本期工程量结算合计
B. 工程应扣款
C. 结算金额合计
D. 扣保留金"
【单选题】
"在成本管理信息（V5.0）系统中，各种数量关系为___。
A. 总控数量≥合同数量≥收方数量≥结算数量
B. 总控数量≥收方数量≥结算数量≥合同数量
C. 合同数量≥总控数量≥收方数量≥结算数量
D. 总控数量≥合同数量≥结算数量≥收方数量"
【单选题】
"在成本管理信息（V5.0）系统中，以下关于系统流程的说法正确的是___。
A. 系统流程由各系统管理员进行设置
B. 系统流程已经固化，公司系统管理员无权限修改
C. 系统流程已经发起不得撤销
D. 系统中已经走完的流程，不可以删除。"
【单选题】
"在成本管理信息（V5.0）系统中，系统应用考核评分汇总表中，以下哪项为局指（代局指）和所属分部评分存在关联的___。
A. 劳务合同
B. 结算审批
C. 结算付款
D. 验工计价"
【单选题】
"成本管理信息系统（V5.0）中，如果要实现与共享之前数据的关联，下列那部操作需系统管理进行___。
A. 进行核算机构对应
B. 进行部门对应
C. 进行人员对应
D. 共享流程发起"
【多选题】
"根据《中铁四局集团工程项目验工计价管理办法》（中铁四成本（2016）451号），合同外验工计价主要包括___。
A. 变更设计
B. 材料调差
C. 经济签证
D. 索赔"
【多选题】
"根据《中铁四局集团工程项目验工计价管理办法》（中铁四成本（2016）451号），以下___属于内部验工计价的主要依据。
A. 局批准下达的合同价款分劈文件
B. 业主批复的当期对外验工计价资料
C. 符合设计文件要求、与实际完成相符的当期工程数量
D. 局审批下达的末次清算分劈方案"
