【单选题】
An administrator reports that the System Event log data is only available for 24 hours when reviewing the Hardware Status tab. Which condition could be responsible for the loss of data?___
A. A Reset event log was executed.
B. The statistical collection level was set to a value of 1.
C. The boot disk of the host is corrupt.
D. Syslog has been configured at the vCenter Server level.
查看试卷，进入试卷练习
微信扫一扫，开始刷题
相关试题
【单选题】
During an upgrade, the ESXi 6.x installer finds an existing version of ESXi and a VMFS3 volume. No virtual machines exist on the host or VMFS3 volume. The requirement is to upgrade to VMFS5. Which option should be chosen to meet this requirement?___
A. Upgrade ESXi and preserve the VMFS datastore
B. Install ESXi and preserve the VMFS datastore
C. Install ESXi and overwrite the VMFS datastore
D. Upgrade
E. SXi and overwrite the VMFS datastore
【单选题】
A vSphere 6.x Standard Switch is configured with 4 virtual machine portgroups, as shown in the exhibit. Which portgroup would be utilized by default when creating a new virtual machine?___
A. Access Network
B. DMZ Network
C. VM Network
D. Virtual Machine Network
【单选题】
Which vSphere 6.x feature will allow an organization to utilize native snapshots?___
A. Virtual Volumes
B. Virtual SAN
C. VMFS3
D. VMFS5
【单选题】
An administrator is creating a new vSphere Distributed Switch that will be utilized with a specific vSphere Cluster. The cluster itself contains a mix of ESXi 5.x and 6.x Hosts. Which Distributed Switch version should be created to support this configuration?___
A. Distributed Switch: 6.0.0
B. Distributed Switch: 5.0.0
C. Distributed Switch: 5.1.0
D. Distributed Switch: 5.5.0
【单选题】
Which load balancing policy, previously limited to vSphere Distributed Switches, is now available on vSphere Standard Switches with vSphere 6.x?___
A. Route based on physical NIC workload
B. Route based on IP Hash
C. Route based on the originating virtual port
D. Route based on Source MAC Hash
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
An administrator has just completed performing an interactive installation of ESXi 6.x and is booting the host. How is the network initially configured?___
A. The network is configured by Automatic Private IP Addressing (APIPA).
B. The network is configured based on the settings detected in DNS.
C. The network is configured with the address as specified in the installer.
D. The network is automatically configured by DHCP.
【单选题】
You have just installed an ESXi 6.x Host. As part of your company security regulations, a security banner must be presented on the console of the host. How can this action be accomplished?___
A. Configure the Advanced Settings > Annotations screen of the ESXi host.
B. This is configured from the Direct Console User Interface configuration menu.
C. It is not possible to configure a security banner for the ESXi host.
D. From vCenter Server, this setting is configured globally in the vCenter Server configuration.
【单选题】
An administrator is only able to see the Health Badge when using the vRealize Operations user interface. What is the likely cause of this behavior?___
A. The vRealize Operations Foundation License is in use.
B. The vmware-sps service failed to start.
C. The vRealize Operations Standard License is in use.
D. The vmware-rbd-watchdog service failed to start.
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets either of these conditions: <High virtual CPU> <High active memory consumption.> <The alarm is only triggering when both of the conditions are met.> What can be done to correct the alarm behavior?___
A. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory and link them together with ESXCLI.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is attempting to restore a number of files in a directory within the Operating System of a virtual machine. How can the administrator restore the files from a previous backup? ___
A. Use the File Level Restore option from the selected backup of the virtual machine in the vSphere Web Client.
B. Connect to the File Level Restore tool from a web browser in the virtual machine.
C. Connect to the File Level Restore tool from the VMware
D. ata Protection appliance.
【单选题】
After selecting an object in vRealize Operations, how can a user compare the badge values of related child objects? ___
A. Use the Scoreboard tab
B. Use the Relationship tab
C. Use the Members tab
D. Use the Overview tab
【单选题】
You want to deploy a vApp and dynamically assign IP addresses without a DHCP server on the network. Which action would you take to accomplish this task? ___
A. Enable IP pools.
B. Configure a local DHCP server in the vApp.
C. Enable NAT on the vApp router.
D. Configure the guest OS for workgroup and WINS.
【单选题】
What is the optimal configuration when building a virtual machine for a single-threaded Windows application? ___
A. Deploy single-threaded applications on uniprocessor virtual machines.
B. Deploy single-threaded applications on symmetric multi-processor virtual machines.
C. Tune single-threaded applications to take advantage of symmetric multi-processor resources.
D. Tune Single-threaded applications at the hypervisor level.
【单选题】
An administrator has created the resource pool configuration shown in the Exhibit. Based on the exhibit, which virtual machine(s) can be successfully powered on? ___
A. VM-M1 only
B. VM-K1 only
C. VM-K1 and VM-K2 only
D. VM-K1, VM-K2, and VM-M1
【单选题】
Which vSphere 6 Enterprise Edition feature will allow an organization to ensure that critical multi-threaded applications have the maximum possible uptime? ___
A. Fault Tolerance
B. High Availability
C. Distributed Resource Scheduler
D. App HA
【单选题】
An administrator has a virtual machine that requires four times the compute resources than other virtual machines on the same ESXi 6.x host. How should the administrator configure the virtual machine settings, in order to be prepared for any resource contention? ___
A. Set the shares of the priority virtual machine to High and the rest to Low.
B. Set the shares of the priority virtual machine to High.
C. Set the shares of the priority virtual machine to High and the rest to Normal.
D. Set the shares of the priority virtual machine to Normal and the rest to Low.
【单选题】
Which type of Adapter does not require vmkernel networking? ___
A. Independent Hardware iSCSI Adapter
B. Dependent Hardware iSCSI Adapter
C. Software iSCSI Adapter
D. Software FCoE Adapter
【单选题】
During the installation of ESXi 6.0, the following error message is reported: Hardware Virtualization is not a feature of the CPU, or is not enabled in the BIOS. Which condition would generate this message? ___
A. LAHF/SAHF is not enabled in the BIOS.
B. NX/XD is not enabled in the BIOS.
C. SSE3 is not enabled in the BIOS.
D. Hyperthreading is not enabled in the BIOS.
【单选题】
An administrator is unable to login to vCenter Server when using the vSphere web client. The administrator successfully accessed vCenter Server using the client earlier the same day. What is the most appropriate first step the administrator should take to resolve this issue? ___
A. Verify the web browser being used has Adobe Flash plugin version 11.5 or later
B. Verify the vCenter Single Sign-On service is running on the vCenter Server
C. Verify the vSphere Web Server service is running on the vCenter Server
D. Verify the administrator has permissions configured in vCenter Server
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets two conditions: <high virtual CPU> <high active memory consumption> The alarm is malfunctioning and triggering when either condition is met instead of both. What can be done to correct the issue? ___
A. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
What must be enabled to ensure that VM Component Protection (VMCP) works in a High Availability cluster? ___
A. VMware Tools Virtual Machine Communication Interface (VMCI)
B. Fault Tolerance
C. Atomic Test and Set (ATS)
D. All Paths Down (APD) Timeout
【单选题】
An administrator wants to add a web server to an existing multi-tier application consisting of three virtual machines: <A web server> <A database server An application server> The web server should be added to the application when the primary web server reaches: <70% vCPU utilization> <55% active memory> Which option will achieve this result? ___
A. Create a virtual machine alarm with an action to run a script that starts a new instance of the web server.
B. Create a host cpu and memory alarm with an action to run a script that starts a new instance of the webserver.
C. Configure HA application monitoring for the web server and set it to trigger deployment of a new instance of the web server.
D. Configure Fault Tolerance on the virtual machine and leave the secondary machine disabled until needed.
【单选题】
An administrator has an application that requires connection directly to PCI devices through a virtual machine. What is a limitation of this configuration? ___
A. Devices must be reserved for PCI passthrough on at least one host on which the virtual machine will run.
B. Snapshots are not supported with DirectPath I/O passthrough devices.
C. A maximum of 18 PCI vSphere
D. irectPath devices can be added to a virtual machine.
【单选题】
The vSphere administrator is configuring directory services for an ESXi host: What should the vSphere administrator do to configure the host to use CAM services? ___
A. Check the Use vSphere Authentication Proxy checkbox.
B. Set Select Directory Service Type to CAM services.
C. Specify CAM$ for the
D. omain.
【单选题】
Which statement is true regarding the licensing of vCenter Server? ___
A. The license for vCenter Server must be provided at the time of installation.
B. Changing the license assigned to vCenter Server requires a restart of the vCenter Server service.
C. Virtual machines can still be powered on if the vCenter Server license expires.
D. Licensing for a single vCenter Server installation is determined by the number of managed virtual machines.
【单选题】
When configuring vSphere Replication for a virtual machine, what is the lowest Recovery Point Objective (RPO) that can be selected? ___
A. 1 min
B. 5 min
C. 10 min
D. 15min
【单选题】
A developer needs to create a multi-tier development stack for a home lab. Which vSphere product will support the architecture required for the least software cost? ___
A. vSphere Hypervisor
B. vSphere Essentials
C. VMware Player
D. VMware Workstation
【单选题】
An administrator is installing Windows into a virtual machine. The DVD has been mounted on the Host and configured for the virtual machine as shown in the Exhibit. Based on the exhibit, when the virtual machine is booted, why would it attempt to search for a PXE server? ___
A. The CD/DVD device is not connected.
B. The ISO is in the incorrect storage location.
C. The OS minimum requirements have not been met.
D. The CD/DVD device is not set to Client Device.
【单选题】
What component must be installed prior to deploying a vCenter Server in vSphere 6.x? ___
A. vCenter Identity Services
B. Platform Services Controller
C. vCenter Single Sign-On
D. Client Integration Plug-In
【单选题】
What is a valid plug-in status for a plug-in that has been added to a vSphere client? ___
A. Disabled
B. Unknown
C. Stopped
D. Installed
【单选题】
Users of an application are reporting performance issues. The following performance values are observed in the vSphere Web Client: <Host CPU utilization is 90%> <Virtual Machine memory utilization is consistently greater than 90% CPU Ready values are higher than 20%> What could be the cause of the application performance issue? ___
A. The host is lacking the CPU resources required to meet the demand.
B. The host is lacking the memory resources required to meet the demand.
C. The virtual machine is lacking the CPU resources required to meet the demand.
D. The virtual machine is lacking the memory resources required to meet the demand.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is re-provisioning an ESXi host and moving it to another datacenter. Which DCUI option should the administrator use to revert the system configuration to the default settings? ___
A. Reset System Configuration
B. Rebuild Default System Configuration
C. Revert System Configuration
D. Renew Default System Configuration
【单选题】
An administrator has just completed installing an ESXi 6.x host, but doesn't know what address has been configured. Where is the ESXi host IP address configured? ___
A. RVC console
B. Direct Console User Interface
C. vSphere Web Client
D. vSphere Client
【单选题】
When is it possible to place a VMFS5 datastore in maintenance mode? ___
A. When it is a member of a Storage DRS cluster
B. When it is a member of Virtual SAN cluster
C. When it is a member of a multi-extent datastore
D. When it is a member of a Virtual Volume
【单选题】
Immediately after installing ESXi, an administrator observes that the Configure Lockdown Mode option is grayed out in the Direct Console User Interface (DCUI). What is the most likely explanation? ___
A. The host has not yet been added to a vCenter Server.
B. The BIOS on the host does not have NX/XD enabled.
C. The ESXi host is running in evaluation mode.
D. The host requires a reboot before this feature is available.
【单选题】
Immediately after installing ESXi, an administrator observes that the Configure Lockdown Mode option is grayed out in the Direct Console User Interface (DCUI). What is the most likely explanation? ___
A. The host has not yet been added to a vCenter Server.
B. The BIOS on the host does not have NX/XD enabled.
C. The ESXi host is running in evaluation mode.
D. The host requires a reboot before this feature is available.
推荐试题
【单选题】
通信设备用交流电供电时，在通信设备的电源输人端子处测量的电压允许变动范围为额定电压值的___。（易）（基础知识）
A. －5%～＋5%
B. －10%～＋5%
C. －10%～＋10%
D. －15%～＋10%
【单选题】
通信电源设备及重要建筑用电设备用交流电供电时，在设备的电源输人端子处测量的电压允许变动范围为额定电压值的___。（中）（基础知识）
A. －5%～＋5%
B. －10%～＋5%
C. －10%～＋10%
D. －15%～＋10%
【单选题】
DC/AC变换器是___。（易）（基础知识）
A. 直流/直流变换器
B. 整流器
C. 逆变器
D. 变压器
【单选题】
交流用电设备采用三相四线制引入时，零线___。（中）（基础知识）
A. 不准安装熔断器
B. 必须安装熔断器
C. 装与不装熔断器均可
D. 经批准可以安装熔断器
【单选题】
熔断器的温度应低于___。（难）（基础知识）
A. 60℃
B. 70℃
C. 80℃
D. 90℃
【单选题】
高频开关型变流电源设备宜放置在有空调的机房，机房温度不宜超过___。（难）（基础知识）
A. 25℃
B. 27℃
C. 28℃
D. 30℃
【单选题】
计算机可直接执行的指令一般包含操作码和操作对象两部分，它们在机器内部都是以___表示的。（易）（基础知识）
A. 二进制编码的形式
B. ASCII编码形式
C. 八进制编码的形式
D. 汇编符号的形式
【单选题】
一般说来，计算机指令的集合称为___。（易）（基础知识）
A. 机器语言
B. 汇编语言
C. 模拟语言
D. 程序
【单选题】
计算机能直接执行的程序是___。（易）（基础知识）
A. 源程序
B. 机器语言程序
C. BASIC语言程序
D. 高级语言程序
【单选题】
___是控制和管理计算机硬件和软件资源，合理地组织计算机工作流程、方便用户使用的程序集合。（易）（基础知识）
A. 监控程序
B. 操作系统
C. 编译系统
D. 应用程序
【单选题】
当前普遍使用的微机的硬件系统主要由___电子元器件构成。（易）（基础知识）
A. 电子管
B. 晶体管
C. 集成电路
D. 大规模或超大规模集成电路
【单选题】
电子计算机的主要特点是：具有___的功能，运行速度快且进行逻辑判断。（易）（基础知识）
A. 自动编程
B. 模仿人的思维
C. 存储记忆
D. 思考并解决问题
【单选题】
目前, 国际上广泛采用的西文字符编码是___。（易）（基础知识）
A. 五笔字型码
B. 区位码
C. 国际码
D. ASCII码
【单选题】
字母 "B"的 ASCII码值比字母 "b"的 ASCII码值___。（中）（基础知识）
【单选题】
七位ASCII码最多可以表示___个西文符号。（中）（基础知识）
A. 256
B. 128
C. 64
D. 32
【单选题】
存放一个汉字的国标码需要___字节。（易）（基础知识）
【单选题】
计算机中指令的执行主要由___完成的。（易）（基础知识）
A. 存储器
B. 控制器
C. CPU
D. 总线
【单选题】
计算机能直接识别的程序是___。（易）（基础知识）
A. 源程序
B. 机器语言程序
C. 汇编语言程序
D. 高级语言程序
【单选题】
下面哪一项不是DOS的基本命令___。（易）（基础知识）
A. format
B. copy
C. dir
D. setup
【单选题】
二进制数11011101转换为十进制数是___。（中）（基础知识）
A. 220
B. 221
C. 251
D. 321
【单选题】
一个数字，用十进制表示是18，用二进制表示是___。（中）（基础知识）
A. 10001
B. 100011
C. 10010
D. 111111
【单选题】
交流电的频率允许变动范围为额定值的___。（难）（基础知识）
A. ±3%
B. ±4%
C. ±5%
D. ±6%
【单选题】
交流电的电压波形正弦畸变率应为___。（难）（基础知识）
【单选题】
发电机的额定电压比电网电压高___是考虑到负荷电流导致在线路上产生压降损失。 （难）（基础知识）
【单选题】
在卫星通信的SDMA方式中，分配给每个地球站的是一个特定的___。（中）（消防通信网络与业务系统管理）
【单选题】
3G图像系统接入主要采用数字接入方式，通过___和VPDN加密方式，将3G终端接入到3G图像管理平台。（中）（音视频系统与应急通信管理）
A. 交换机
B. 安全网闸
C. 路由器
D. MCU服务器
【单选题】
3G单兵图传设备车载机柜式部署需占用机柜___高度。（中）（音视频系统与应急通信管理）
【单选题】
下列对静中通的特点描述错误的是___。（中）（音视频系统与应急通信管理）
A. 接电后自动搜索到所收卫星，可换星；
B. 安装携带方便；
C. 不具备防雨、防腐蚀底座；
D. 可以用于接收电视节目和股票信息；
【单选题】
移动通信中的无线信道是指___之间的信息通道。（难）（消防通信网络与业务系统管理）
A. MS与BTS
B. BTS与BSC
C. BSC与MSC
D. MS与BSC
【单选题】
在移动通信中，电磁波覆盖不到的区域叫___。（易）（消防通信网络与业务系统管理）
A. 盲区
B. 位置区
C. 扇形小区
D. 无线小区
【单选题】
交换机采用___逻辑网络拓扑结构。（中）（消防通信网络与业务系统管理）
A. 总线型
B. 星型
C. 网型
D. 环型
E. 树型
【单选题】
程控交换机的话路系统包括___。（易）（消防通信网络与业务系统管理）
A. 用户集线器
B. 远端用户集线器
C. 程序模块
D. 各种中继器
E. 微处理机
【单选题】
程控交换机的控制系统包括___。（易）（消防通信网络与业务系统管理）
A. 微处理机
B. 程序模块
C. 信令设备
D. 用户集线器
E. 各种中继器
【单选题】
IP电话网主要由___组成。（易）（消防通信网络与业务系统管理）
A. IP承载网络
B. IP电话网关
C. IP电话网的管理设备
D. 传统电路交换网的接入部分
E. 程控交换机
【单选题】
程控交换机的话路系统包括___。（易）（消防通信网络与业务系统管理）
A. 用户集线器
B. 远端用户集线器
C. 程序模块
D. 各种中继器
E. 微处理机
【单选题】
程控交换机的控制系统包括___。（易）（消防通信网络与业务系统管理）
A. 微处理机
B. 程序模块
C. 信令设备
D. 用户集线器
E. 各种中继器
【单选题】
IP电话网主要由___组成。（易）（消防通信网络与业务系统管理）
A. IP承载网络
B. IP电话网关
C. IP电话网的管理设备
D. 传统电路交换网的接入部分
E. 程控交换机
【单选题】
消防卫星站使用的卫星属于___卫星。（中）（基础知识）
A. 低轨道卫星
B. 中轨道卫星
C. 同步轨道卫星
D. 倾斜轨道卫星
【单选题】
消防卫星站发射或者接收的电磁波属于___波段。（易）（基础知识）
A. C波段
B. Ku波段
C. L波段
D. Ka波段
【单选题】
正常状态下，卫星站双向通信的延时约是___。（难）（基础知识）
A. 540ms
B. 0.54ms
C. 0.27s
D. 2000ms
