【单选题】
You want to deploy a vApp and dynamically assign IP addresses without a DHCP server on the network. Which action would you take to accomplish this task? ___
A. Enable IP pools.
B. Configure a local DHCP server in the vApp.
C. Enable NAT on the vApp router.
D. Configure the guest OS for workgroup and WINS.
查看试卷，进入试卷练习
微信扫一扫，开始刷题
相关试题
【单选题】
What is the optimal configuration when building a virtual machine for a single-threaded Windows application? ___
A. Deploy single-threaded applications on uniprocessor virtual machines.
B. Deploy single-threaded applications on symmetric multi-processor virtual machines.
C. Tune single-threaded applications to take advantage of symmetric multi-processor resources.
D. Tune Single-threaded applications at the hypervisor level.
【单选题】
An administrator has created the resource pool configuration shown in the Exhibit. Based on the exhibit, which virtual machine(s) can be successfully powered on? ___
A. VM-M1 only
B. VM-K1 only
C. VM-K1 and VM-K2 only
D. VM-K1, VM-K2, and VM-M1
【单选题】
Which vSphere 6 Enterprise Edition feature will allow an organization to ensure that critical multi-threaded applications have the maximum possible uptime? ___
A. Fault Tolerance
B. High Availability
C. Distributed Resource Scheduler
D. App HA
【单选题】
An administrator has a virtual machine that requires four times the compute resources than other virtual machines on the same ESXi 6.x host. How should the administrator configure the virtual machine settings, in order to be prepared for any resource contention? ___
A. Set the shares of the priority virtual machine to High and the rest to Low.
B. Set the shares of the priority virtual machine to High.
C. Set the shares of the priority virtual machine to High and the rest to Normal.
D. Set the shares of the priority virtual machine to Normal and the rest to Low.
【单选题】
Which type of Adapter does not require vmkernel networking? ___
A. Independent Hardware iSCSI Adapter
B. Dependent Hardware iSCSI Adapter
C. Software iSCSI Adapter
D. Software FCoE Adapter
【单选题】
During the installation of ESXi 6.0, the following error message is reported: Hardware Virtualization is not a feature of the CPU, or is not enabled in the BIOS. Which condition would generate this message? ___
A. LAHF/SAHF is not enabled in the BIOS.
B. NX/XD is not enabled in the BIOS.
C. SSE3 is not enabled in the BIOS.
D. Hyperthreading is not enabled in the BIOS.
【单选题】
An administrator is unable to login to vCenter Server when using the vSphere web client. The administrator successfully accessed vCenter Server using the client earlier the same day. What is the most appropriate first step the administrator should take to resolve this issue? ___
A. Verify the web browser being used has Adobe Flash plugin version 11.5 or later
B. Verify the vCenter Single Sign-On service is running on the vCenter Server
C. Verify the vSphere Web Server service is running on the vCenter Server
D. Verify the administrator has permissions configured in vCenter Server
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets two conditions: <high virtual CPU> <high active memory consumption> The alarm is malfunctioning and triggering when either condition is met instead of both. What can be done to correct the issue? ___
A. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
What must be enabled to ensure that VM Component Protection (VMCP) works in a High Availability cluster? ___
A. VMware Tools Virtual Machine Communication Interface (VMCI)
B. Fault Tolerance
C. Atomic Test and Set (ATS)
D. All Paths Down (APD) Timeout
【单选题】
An administrator wants to add a web server to an existing multi-tier application consisting of three virtual machines: <A web server> <A database server An application server> The web server should be added to the application when the primary web server reaches: <70% vCPU utilization> <55% active memory> Which option will achieve this result? ___
A. Create a virtual machine alarm with an action to run a script that starts a new instance of the web server.
B. Create a host cpu and memory alarm with an action to run a script that starts a new instance of the webserver.
C. Configure HA application monitoring for the web server and set it to trigger deployment of a new instance of the web server.
D. Configure Fault Tolerance on the virtual machine and leave the secondary machine disabled until needed.
【单选题】
An administrator has an application that requires connection directly to PCI devices through a virtual machine. What is a limitation of this configuration? ___
A. Devices must be reserved for PCI passthrough on at least one host on which the virtual machine will run.
B. Snapshots are not supported with DirectPath I/O passthrough devices.
C. A maximum of 18 PCI vSphere
D. irectPath devices can be added to a virtual machine.
【单选题】
The vSphere administrator is configuring directory services for an ESXi host: What should the vSphere administrator do to configure the host to use CAM services? ___
A. Check the Use vSphere Authentication Proxy checkbox.
B. Set Select Directory Service Type to CAM services.
C. Specify CAM$ for the
D. omain.
【单选题】
Which statement is true regarding the licensing of vCenter Server? ___
A. The license for vCenter Server must be provided at the time of installation.
B. Changing the license assigned to vCenter Server requires a restart of the vCenter Server service.
C. Virtual machines can still be powered on if the vCenter Server license expires.
D. Licensing for a single vCenter Server installation is determined by the number of managed virtual machines.
【单选题】
When configuring vSphere Replication for a virtual machine, what is the lowest Recovery Point Objective (RPO) that can be selected? ___
A. 1 min
B. 5 min
C. 10 min
D. 15min
【单选题】
A developer needs to create a multi-tier development stack for a home lab. Which vSphere product will support the architecture required for the least software cost? ___
A. vSphere Hypervisor
B. vSphere Essentials
C. VMware Player
D. VMware Workstation
【单选题】
An administrator is installing Windows into a virtual machine. The DVD has been mounted on the Host and configured for the virtual machine as shown in the Exhibit. Based on the exhibit, when the virtual machine is booted, why would it attempt to search for a PXE server? ___
A. The CD/DVD device is not connected.
B. The ISO is in the incorrect storage location.
C. The OS minimum requirements have not been met.
D. The CD/DVD device is not set to Client Device.
【单选题】
What component must be installed prior to deploying a vCenter Server in vSphere 6.x? ___
A. vCenter Identity Services
B. Platform Services Controller
C. vCenter Single Sign-On
D. Client Integration Plug-In
【单选题】
What is a valid plug-in status for a plug-in that has been added to a vSphere client? ___
A. Disabled
B. Unknown
C. Stopped
D. Installed
【单选题】
Users of an application are reporting performance issues. The following performance values are observed in the vSphere Web Client: <Host CPU utilization is 90%> <Virtual Machine memory utilization is consistently greater than 90% CPU Ready values are higher than 20%> What could be the cause of the application performance issue? ___
A. The host is lacking the CPU resources required to meet the demand.
B. The host is lacking the memory resources required to meet the demand.
C. The virtual machine is lacking the CPU resources required to meet the demand.
D. The virtual machine is lacking the memory resources required to meet the demand.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is re-provisioning an ESXi host and moving it to another datacenter. Which DCUI option should the administrator use to revert the system configuration to the default settings? ___
A. Reset System Configuration
B. Rebuild Default System Configuration
C. Revert System Configuration
D. Renew Default System Configuration
【单选题】
An administrator has just completed installing an ESXi 6.x host, but doesn't know what address has been configured. Where is the ESXi host IP address configured? ___
A. RVC console
B. Direct Console User Interface
C. vSphere Web Client
D. vSphere Client
【单选题】
When is it possible to place a VMFS5 datastore in maintenance mode? ___
A. When it is a member of a Storage DRS cluster
B. When it is a member of Virtual SAN cluster
C. When it is a member of a multi-extent datastore
D. When it is a member of a Virtual Volume
【单选题】
Immediately after installing ESXi, an administrator observes that the Configure Lockdown Mode option is grayed out in the Direct Console User Interface (DCUI). What is the most likely explanation? ___
A. The host has not yet been added to a vCenter Server.
B. The BIOS on the host does not have NX/XD enabled.
C. The ESXi host is running in evaluation mode.
D. The host requires a reboot before this feature is available.
【单选题】
Immediately after installing ESXi, an administrator observes that the Configure Lockdown Mode option is grayed out in the Direct Console User Interface (DCUI). What is the most likely explanation? ___
A. The host has not yet been added to a vCenter Server.
B. The BIOS on the host does not have NX/XD enabled.
C. The ESXi host is running in evaluation mode.
D. The host requires a reboot before this feature is available.
【单选题】
Which Single Sign-On deployment mode should an administrator use for two 6.x vCenter Servers configured with linked mode? ___
A. Basic Single Sign-On with vCenter Server Heartbeat
B. Multisite Single Sign-On
C. Basic Single Sign-On
D. Single Sign-On with Linked Mode
【单选题】
What is required when changing a virtual machine name using the vSphere Web Client? ___
A. Verify connectivity to the ESXi host where the virtual machine is running and its inventory list is accessible.
B. Verify in which datastore the virtual machine resides and that you have access and its inventory list is accessible.
C. Verify that virtual machine files are stored in the same datastore and can be accessed in the datastore browser list.
D. Verify the virtual machine is not running in Fault Tolerant mode and that it is not in a Distributed Resource Scheduler cluster.
【单选题】
An administrator deploys vRealize Operations into a vSphere 6.x environment. After the deployment, the administrator notices that badges are not appearing. What is a likely cause of this behavior? ___
A. Badges do not appear until you register vRealize Operations with vCenter Server.
B. Badges do not appear until you register a vCenter Server in vRealize Operations.
C. The vRealize Operations appliance needs to be redeployed.
D. The vCenter Server appliance needs to be redeployed.
【单选题】
How are ports scaled on vSphere Standard Switches (vSS)? ___
A. Ports on a vSS can be dynamically scaled up and down.
B. Ports on a vSS can only be statically scaled up or down.
C. Ports on a vSS can only be dynamically scaled down.
D. Ports on a vSS can only be dynamically scaled up.
【单选题】
A High Availability (HA) cluster is configured to respond to a given number of host failures. The cluster contains virtual machines configured with these settings: VM1 has a 1GHz CPU reservation and no Memory reservation VM2 has a 2GHz CPU reservation and no Memory reservation VM3 has no CPU reservation and no Memory reservation . Given this information, what is the correct slot size for the cluster? ___
A. The CPU Reservation should be set to 32MHz and the memory reservation should be set to 32MB plus memory overhead.
B. The CPU reservation should be set to 1 GHz and the memory reservation should be set to 0MB plus memory overhead.
C. The CPU reservation should be set to 2 GHz, and the memory reservation should be set to 0MB plus the virtual machine memory overhead.
D. The CPU reservation should be set to 2 GHz, and the memory reservation should be set to 32MB, plus the virtual machine memory overhead.
【单选题】
An administrator is planning a vSphere infrastructure with the following specific networking requirements: <The ability to shape inbound (RX) traffic> <Support for Private VLANs (PVLANs)> <Support for LLDP (Link Layer Discovery Protocol)>. What is the minimum vSphere Edition that will support these requirements? ___
A. vSphere Essentials Plus
B. vSphere Standard
C. vSphere Enterprise
D. vSphere
E. nterprise Plus
【单选题】
When you add an ESXi 6.x host to a new Cluster, which vSphere object owns the CPU and Memory resources of the hosts? ___
A. vCenter Server
B. Datacenter
C. Cluster
D. Host
【单选题】
A user is trying to retrieve objects from a SharePoint server and finds the request is taking an excessive amount of time. An administrator tries to isolate the issue and notes the following: Application performance is poor when compared to virtual machines on other hosts. Performance improves when the virtual machine is moved to another host. The virtual machine encounters higher than expected CPU %Ready times. What conclusion can be reached regarding the performance issues for this virtual machine? ___
A. Host Power Management is directly impacting virtual machine performance.
B. The virtual machine has a large number of snapshots.
C. The Path Selection Policy for the storage device is set differently on the affected host.
D. Network I/O control is configured for the portgroup.
【单选题】
A virtual machine template is accidently removed from the vCenter Server Inventory. Which method would be used to recover the template back into the environment?___
A. Use the datastore browser to locate the template, then right click and add the .vmtx file to inventory.
B. Use the datastore browser to locate the template, then right click and add the .vmx file to inventory.
C. Using the Managed Object Browser and adding the template from the ManagedObjectReference:GuestFileManager object.
D. Using the Managed Object Browser and adding the template from the ManagedObjectReference:VirtualDiskManager object.
【单选题】
A vSphere administrator needs to backup a virtual machine that has a Microsoft SQL Server Database installed. Which solution allows for an application quiesce to occur during backup?___
A. VMware vCenter Converter
B. VMware vCenter Site Recovery Manager
C. VMware vSphere Replication
D. VMware vSphere Data Protection Advanced
【单选题】
An administrator is migrating a virtual machine from a Test cluster to a Production cluster. The two environments do not have any shared storage. What is the easiest way to accomplish this task? ___
A. Perform a Storage vMotion.
B. Perform a regular vMotion.
C. Perform a Virtual to Virtual migration.
D. Perform a backup and restore using VMware Data Protection.
【单选题】
An administrator must determine an appropriate backup solution, given these conditions: 50 of the virtual machines are in a resource pool named Finance. 50 of the virtual machines are in a resource pool named QA. Which solution allows an administrator the ability to backup 100 virtual machines? ___
A. Use Snapshot Manager on the vCenter Server to backup the virtual machines.
B. Use the VMware Consolidated Backup (vcb) tool on the ESXi Host to backup the virtual machines.
C. Use the VMware Data Recovery (VDR) Appliance on the vCenter Server to backup the virtual machines.
D. Use the VMware Data Protection (VDP) Appliance on one of the
E. SXi Hosts to backup the virtual machines.
【单选题】
What is a benefit of using Enhanced vMotion Compatibility for an environment? ___
A. EVC masks CPU features to allow compatibility between hosts that are dissimilar.
B. EVC allows for cross platform vMotion to occur.
C. EVC enables Long
D. istance vMotion.
【单选题】
How many Link Aggregation Groups (LAGs) can be configured on a vSphere 6.x Distributed Switch? ___
A. 64
B. 96
C. 128
D. 256
【单选题】
How many Link Aggregation Groups (LAGs) can be configured on a vSphere 6.x Distributed Switch? ___
A. 64
B. 96
C. 128
D. 256
推荐试题
【单选题】
某电视机水平-垂直扫描发生器需要一个分频器将31500HZ的脉冲转换为60HZ的脉冲，欲构成此分频器至少需要___个触发器。
A. 10
B. 60
C. 525
D. 31500
【单选题】
555定时器属于___
A. 时序逻辑电路
B. 组合逻辑电路
C. 模拟电子电路
【单选题】
54多谐振荡器可产生 ___
A. 正弦波
B. 矩形脉冲
C. 三角波
D. 锯齿波
【单选题】
脉冲整形电路有___。
A. 多谐振荡器
B. 施密特触发器
C. 555定时器
【单选题】
56石英晶体多谐振荡器的突出优点是___ 。
A. 速度高
B. 电路简单
C. 振荡频率稳定
D. 输出波形边沿陡峭
【单选题】
TTL单定时器型号的最后几位数字为___。
A. 555
B. 556
C. 7555
D. 7556
【单选题】
555定时器不可以组成___。
A. 多谐振荡器
B. 单稳态触发器
C. 施密特触发器
D. JK触发器
【单选题】
59以下各电路中，___可以产生脉冲定时。
A. 多谐振荡器
B. 单稳态触发器
C. 施密特触发器
D. 石英晶体多谐振荡器
【单选题】
555定时电路端不用时，应当___。
A. 接高电平
B. 接低电平
C. 通过0.01µF的电容接地
D. 通过小于500Ω的电阻接地
【单选题】
89S51的内部程序存储器与数据存储器容量各为多少？___
A. 64KB、128B
B. 4KB、64KB
C. 4KB、128B
D. 8KB、256B
【单选题】
89S51比89C51多出了哪个功能？___
A. 存储器加倍
B. 具有WDT工能
C. 多了一个8位输入/输出端口
D. 多了一个串行口
【单选题】
6在DIP40封装的8×51芯片里，复位RESET引脚的引脚编号是什么？___
【单选题】
7在DIP40封装的8×51芯片里，接地引脚与电源引脚的引脚编号是什么？___
A. 1、21
B. 11.31
C. 20、40
D. 19、39
【单选题】
9在12MHz始终脉冲的8051系统里，一个机器周期有多长？___
A. 1µs
B. 12µs
C. 1ms
D. 12ms
【单选题】
12下列哪个寄存器是8×51内的16位寄存器？___
【单选题】
14在8×51的输入/输出端口里，哪个输入/输出端口执行在输出功能时没有内部上拉电阻？___
【单选题】
8×51的P0采用哪种电路结构？___
A. 集电极开路式输出
B. 基极开路式输出
C. 发射机开路式输出
D. 图腾柱输出
【单选题】
17在8×51里，若要扩展外部存储器时，数据总线连接哪个输入/输出端口？___
【单选题】
点亮一般的LED所耗用的电流约为多少？___
A. 1~5µA
B. 10~20µA
C. 1~5mA
D. 10~20mA
【单选题】
19一般地，蜂鸣器属于哪种负载？___
A. 电阻性负载
B. 电感性负载
C. 电容性负载
D. 不导电负载
【单选题】
7405/7406的输出采用哪种电路结构？___
A. 集电极开路式输出
B. 基极开路式输出
C. 发射机开路式输出
D. 图腾柱输出
【单选题】
21在继电器中，NO接点是一种什么接点？___
A. 不使用接点
B. 不存在接点
C. 激磁后即开路的接点
D. 常开接点
【单选题】
22所谓2P的继电器，代表什么意思？___
A. 只有2个接点
B. 两相的负载
C. 两组电源
D. 2组c接点
【单选题】
23共阳极七段数码管显示器的驱动信号有何特色？___
A. 低电平点亮
B. 低电平不亮
C. 高电平点亮
D. 以上皆非
【单选题】
24在8×51的程序里，若要将某个输入/输出端口设置成输入功能，应如何处理？___
A. 先输出高电平到该输入/输出端口
B. 先输出低电平到该输入/输出端口
C. 先读取该输入/输出端口的状态
D. 先保存该输入/输出端口的状态
【单选题】
8×51提供几个外部中断和定时器/计数器中断？___
A. 2,2
B. 3,6
C. 2,3
D. 3,7
【单选题】
8×51的IP缓存器的功能如何？___
A. 设置中断优先级
B. 启动中断功能
C. 设置中断触发信号
D. 定义CPU的网址
【单选题】
28若要让采用低电平触发，则应如何设置？___
A. EX0=0
B. EX0=1
C. IT0=0
D. IT0=1
【单选题】
29在Keil µVision3里进行调试/仿真时，在哪里操作才能触动程序中断？___
A. 在Interrupt System
B. 在Cotorl Box对话框里
C. 直接单击魔术棒按钮即可
D. 直接按0键
【单选题】
30在8×51所提供的中断功能里，下列哪个优先级比较高？___
A. T1
B. RI/TI
C. T0
D. INT0
【单选题】
31在TCON缓存里，IE1的功能是什么？___
A. 触发 IE1中断
B. 指示IE1中断的标志
C. 提高IE1优先等级
D. 取消IE1中断
【单选题】
32在Keil C里，中断子程序与函数又何不同？___
A. 中断子程序不必声明
B. 函数不必声明
C. 中断子程序必须有形式参数
D. 中断子程序一定会有返回值
【单选题】
33若要同时启用INT0及INT1中断功能，则应如何设置？___
A. TCON=0×81
B. IE=0×85
C. IP=0×83
D. IE=0×03
【单选题】
35在8×51的Timer里，若使用Mode 0，其最大计数值为多少个机器周期？___
A. 65636
B. 8192
C. 1024
D. 256
【单选题】
36在12MHz的8×51系统里，哪一种方式一次可定时5ms？___
A. Mode 0及Mode 1
B. Mode 1及Mode 2
C. Mode 2及Mode 3
D. Mode3及Mode 1
【单选题】
37若要让Timer作为外部计数只用，应如何设置？___
A. Gate=0
B. Gate=1
C. C/=0
D. C/=1
【单选题】
39下列哪个不是8×51所提供的省电方式？___
A. PD方式
B. IDL方式
C. LP方式
D. 待机方式
【单选题】
89S51的看门狗有何作用？___
A. 重复执行程序
B. 找回遗失数据
C. 复位系统
D. 防止中毒
【单选题】
41若要启用WDT，则应依次填入WDTRST寄存器哪些数据？___
A. 0xe1、0xe2
B. 0xe1、0x1e
C. 0x1e、0xe1
D. 0x10、0x01
【单选题】
8×51的定时器，在下列哪种方式下具有自动加载功能？___
A. Mode0
B. Mode1
C. Mode2
D. Mode3
