刷题
导入试题
【单选题】
An ESXi 6.x host consists of 24 logical cores. Hyperthreading is enabled on the host. What is the maximum number of vCPUs that can be assigned to a virtual machine on this host?___
A. 24
B. 48
C. 64
D. 128
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
A
解析
暂无解析
相关试题
【单选题】
By default, each ESXi 6.x host is provisioned with a certificate from which root certificate authority?___
A. RedHat Certificate Authority
B. VMware Certificate Authority
C. DigiCert Certificate Authority
D. Verisign Certificate Authority
【单选题】
An administrator is adding an NFS datastore as shown in the Exhibit. What is the purpose of the Servers to be added list?___
A. It contains the IP addresses of the NFS Storage Server to provide multipathing capability.
B. It contains the IP addresses of the ESXi hosts that mount the datastore.
C. It contains the IP addresses used for
D. ynamic Discovery of targets.
【单选题】
An administrator reports that the System Event log data is only available for 24 hours when reviewing the Hardware Status tab. Which condition could be responsible for the loss of data?___
A. A Reset event log was executed.
B. The statistical collection level was set to a value of 1.
C. The boot disk of the host is corrupt.
D. Syslog has been configured at the vCenter Server level.
【单选题】
During an upgrade, the ESXi 6.x installer finds an existing version of ESXi and a VMFS3 volume. No virtual machines exist on the host or VMFS3 volume. The requirement is to upgrade to VMFS5. Which option should be chosen to meet this requirement?___
A. Upgrade ESXi and preserve the VMFS datastore
B. Install ESXi and preserve the VMFS datastore
C. Install ESXi and overwrite the VMFS datastore
D. Upgrade
E. SXi and overwrite the VMFS datastore
【单选题】
A vSphere 6.x Standard Switch is configured with 4 virtual machine portgroups, as shown in the exhibit. Which portgroup would be utilized by default when creating a new virtual machine?___
A. Access Network
B. DMZ Network
C. VM Network
D. Virtual Machine Network
【单选题】
Which vSphere 6.x feature will allow an organization to utilize native snapshots?___
A. Virtual Volumes
B. Virtual SAN
C. VMFS3
D. VMFS5
【单选题】
An administrator is creating a new vSphere Distributed Switch that will be utilized with a specific vSphere Cluster. The cluster itself contains a mix of ESXi 5.x and 6.x Hosts. Which Distributed Switch version should be created to support this configuration?___
A. Distributed Switch: 6.0.0
B. Distributed Switch: 5.0.0
C. Distributed Switch: 5.1.0
D. Distributed Switch: 5.5.0
【单选题】
Which load balancing policy, previously limited to vSphere Distributed Switches, is now available on vSphere Standard Switches with vSphere 6.x?___
A. Route based on physical NIC workload
B. Route based on IP Hash
C. Route based on the originating virtual port
D. Route based on Source MAC Hash
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
An administrator has just completed performing an interactive installation of ESXi 6.x and is booting the host. How is the network initially configured?___
A. The network is configured by Automatic Private IP Addressing (APIPA).
B. The network is configured based on the settings detected in DNS.
C. The network is configured with the address as specified in the installer.
D. The network is automatically configured by DHCP.
【单选题】
You have just installed an ESXi 6.x Host. As part of your company security regulations, a security banner must be presented on the console of the host. How can this action be accomplished?___
A. Configure the Advanced Settings > Annotations screen of the ESXi host.
B. This is configured from the Direct Console User Interface configuration menu.
C. It is not possible to configure a security banner for the ESXi host.
D. From vCenter Server, this setting is configured globally in the vCenter Server configuration.
【单选题】
An administrator is only able to see the Health Badge when using the vRealize Operations user interface. What is the likely cause of this behavior?___
A. The vRealize Operations Foundation License is in use.
B. The vmware-sps service failed to start.
C. The vRealize Operations Standard License is in use.
D. The vmware-rbd-watchdog service failed to start.
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets either of these conditions: <High virtual CPU> <High active memory consumption.> <The alarm is only triggering when both of the conditions are met.> What can be done to correct the alarm behavior?___
A. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory and link them together with ESXCLI.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is attempting to restore a number of files in a directory within the Operating System of a virtual machine. How can the administrator restore the files from a previous backup? ___
A. Use the File Level Restore option from the selected backup of the virtual machine in the vSphere Web Client.
B. Connect to the File Level Restore tool from a web browser in the virtual machine.
C. Connect to the File Level Restore tool from the VMware
D. ata Protection appliance.
【单选题】
After selecting an object in vRealize Operations, how can a user compare the badge values of related child objects? ___
A. Use the Scoreboard tab
B. Use the Relationship tab
C. Use the Members tab
D. Use the Overview tab
【单选题】
You want to deploy a vApp and dynamically assign IP addresses without a DHCP server on the network. Which action would you take to accomplish this task? ___
A. Enable IP pools.
B. Configure a local DHCP server in the vApp.
C. Enable NAT on the vApp router.
D. Configure the guest OS for workgroup and WINS.
【单选题】
What is the optimal configuration when building a virtual machine for a single-threaded Windows application? ___
A. Deploy single-threaded applications on uniprocessor virtual machines.
B. Deploy single-threaded applications on symmetric multi-processor virtual machines.
C. Tune single-threaded applications to take advantage of symmetric multi-processor resources.
D. Tune Single-threaded applications at the hypervisor level.
【单选题】
An administrator has created the resource pool configuration shown in the Exhibit. Based on the exhibit, which virtual machine(s) can be successfully powered on? ___
A. VM-M1 only
B. VM-K1 only
C. VM-K1 and VM-K2 only
D. VM-K1, VM-K2, and VM-M1
【单选题】
Which vSphere 6 Enterprise Edition feature will allow an organization to ensure that critical multi-threaded applications have the maximum possible uptime? ___
A. Fault Tolerance
B. High Availability
C. Distributed Resource Scheduler
D. App HA
【单选题】
An administrator has a virtual machine that requires four times the compute resources than other virtual machines on the same ESXi 6.x host. How should the administrator configure the virtual machine settings, in order to be prepared for any resource contention? ___
A. Set the shares of the priority virtual machine to High and the rest to Low.
B. Set the shares of the priority virtual machine to High.
C. Set the shares of the priority virtual machine to High and the rest to Normal.
D. Set the shares of the priority virtual machine to Normal and the rest to Low.
【单选题】
Which type of Adapter does not require vmkernel networking? ___
A. Independent Hardware iSCSI Adapter
B. Dependent Hardware iSCSI Adapter
C. Software iSCSI Adapter
D. Software FCoE Adapter
【单选题】
During the installation of ESXi 6.0, the following error message is reported: Hardware Virtualization is not a feature of the CPU, or is not enabled in the BIOS. Which condition would generate this message? ___
A. LAHF/SAHF is not enabled in the BIOS.
B. NX/XD is not enabled in the BIOS.
C. SSE3 is not enabled in the BIOS.
D. Hyperthreading is not enabled in the BIOS.
【单选题】
An administrator is unable to login to vCenter Server when using the vSphere web client. The administrator successfully accessed vCenter Server using the client earlier the same day. What is the most appropriate first step the administrator should take to resolve this issue? ___
A. Verify the web browser being used has Adobe Flash plugin version 11.5 or later
B. Verify the vCenter Single Sign-On service is running on the vCenter Server
C. Verify the vSphere Web Server service is running on the vCenter Server
D. Verify the administrator has permissions configured in vCenter Server
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets two conditions: <high virtual CPU> <high active memory consumption> The alarm is malfunctioning and triggering when either condition is met instead of both. What can be done to correct the issue? ___
A. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
What must be enabled to ensure that VM Component Protection (VMCP) works in a High Availability cluster? ___
A. VMware Tools Virtual Machine Communication Interface (VMCI)
B. Fault Tolerance
C. Atomic Test and Set (ATS)
D. All Paths Down (APD) Timeout
【单选题】
An administrator wants to add a web server to an existing multi-tier application consisting of three virtual machines: <A web server> <A database server An application server> The web server should be added to the application when the primary web server reaches: <70% vCPU utilization> <55% active memory> Which option will achieve this result? ___
A. Create a virtual machine alarm with an action to run a script that starts a new instance of the web server.
B. Create a host cpu and memory alarm with an action to run a script that starts a new instance of the webserver.
C. Configure HA application monitoring for the web server and set it to trigger deployment of a new instance of the web server.
D. Configure Fault Tolerance on the virtual machine and leave the secondary machine disabled until needed.
【单选题】
An administrator has an application that requires connection directly to PCI devices through a virtual machine. What is a limitation of this configuration? ___
A. Devices must be reserved for PCI passthrough on at least one host on which the virtual machine will run.
B. Snapshots are not supported with DirectPath I/O passthrough devices.
C. A maximum of 18 PCI vSphere
D. irectPath devices can be added to a virtual machine.
【单选题】
The vSphere administrator is configuring directory services for an ESXi host: What should the vSphere administrator do to configure the host to use CAM services? ___
A. Check the Use vSphere Authentication Proxy checkbox.
B. Set Select Directory Service Type to CAM services.
C. Specify CAM$ for the
D. omain.
【单选题】
Which statement is true regarding the licensing of vCenter Server? ___
A. The license for vCenter Server must be provided at the time of installation.
B. Changing the license assigned to vCenter Server requires a restart of the vCenter Server service.
C. Virtual machines can still be powered on if the vCenter Server license expires.
D. Licensing for a single vCenter Server installation is determined by the number of managed virtual machines.
【单选题】
When configuring vSphere Replication for a virtual machine, what is the lowest Recovery Point Objective (RPO) that can be selected? ___
A. 1 min
B. 5 min
C. 10 min
D. 15min
【单选题】
A developer needs to create a multi-tier development stack for a home lab. Which vSphere product will support the architecture required for the least software cost? ___
A. vSphere Hypervisor
B. vSphere Essentials
C. VMware Player
D. VMware Workstation
【单选题】
An administrator is installing Windows into a virtual machine. The DVD has been mounted on the Host and configured for the virtual machine as shown in the Exhibit. Based on the exhibit, when the virtual machine is booted, why would it attempt to search for a PXE server? ___
A. The CD/DVD device is not connected.
B. The ISO is in the incorrect storage location.
C. The OS minimum requirements have not been met.
D. The CD/DVD device is not set to Client Device.
【单选题】
What component must be installed prior to deploying a vCenter Server in vSphere 6.x? ___
A. vCenter Identity Services
B. Platform Services Controller
C. vCenter Single Sign-On
D. Client Integration Plug-In
【单选题】
What is a valid plug-in status for a plug-in that has been added to a vSphere client? ___
A. Disabled
B. Unknown
C. Stopped
D. Installed
【单选题】
Users of an application are reporting performance issues. The following performance values are observed in the vSphere Web Client: <Host CPU utilization is 90%> <Virtual Machine memory utilization is consistently greater than 90% CPU Ready values are higher than 20%> What could be the cause of the application performance issue? ___
A. The host is lacking the CPU resources required to meet the demand.
B. The host is lacking the memory resources required to meet the demand.
C. The virtual machine is lacking the CPU resources required to meet the demand.
D. The virtual machine is lacking the memory resources required to meet the demand.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is re-provisioning an ESXi host and moving it to another datacenter. Which DCUI option should the administrator use to revert the system configuration to the default settings? ___
A. Reset System Configuration
B. Rebuild Default System Configuration
C. Revert System Configuration
D. Renew Default System Configuration
【单选题】
An administrator has just completed installing an ESXi 6.x host, but doesn't know what address has been configured. Where is the ESXi host IP address configured? ___
A. RVC console
B. Direct Console User Interface
C. vSphere Web Client
D. vSphere Client
推荐试题
【单选题】
(B737ng)关于驾驶舱空调空气分配系统中风挡及驾驶员脚部空气外流活门B737各系列工作原理说法正确的是___
A. 737-345和737NG一样
B. 737-345和737-700一样,但和737-800不同
C. 737-345和737-800一样,但和737-700不同
D. 737-345和737NG不一样
【单选题】
(B737ng)关于前外流活门哪条是错误的:___
A. A. 再循环风扇工作,前放气活门一定关闭
B. B. 再循环风扇工作,前放气活门不一定打开
C. C. 后外流门全开,前外流门一定打开
D. D. 后外流门全关,前外流门一定关闭
【单选题】
(B737ng)关于座舱高度的说法正确的是 ___
A. A. 飞机在地面不增压时,座舱高度与飞行高度不在同一个海拔高度
B. B. 飞机在巡航时,座跄高度低于飞行高度.
C. C. 飞机在巡航时,座舱高度高于飞行高度.
D. D. 以上都不正确.
【单选题】
(B737ng)驾驶仓的掺混空气可以来自;___
A. 空调混合室
B. 右空调组件
C. 左空调组件
D. 以上都对
【单选题】
(B737ng)空调ACM在制冷过程中收集的水分通过喷嘴排放到哪里___
A. 充压进气管道
B. 主热交换器
C. 涡轮
D. 压气机
【单选题】
(B737ng)空调温度控制系统中,哪一个控制盒只有737-800有,而737-700没有___
A. 组件/区域温度控制器
B. ACAU(空调附件控制盒)
C. 客舱温度控制器
D. 以上都对
【单选题】
(B737ng)空气循环机(即压缩机与涡轮的组合)的作用是 ___
A. A. 为空调系统冷却引气
B. B. 为空调系统调节引气
C. C. 为客舱增压系统压缩引气
D. D. 除空调系统中水分
【单选题】
(B737ng)空气循环机包括___
A. 压气机和热交换器
B. 冷凝器和热交换器
C. 压气机和冷却涡轮
D. 涡轮和涡轮风扇
【单选题】
(B737ng)空气循环机的滑油量少于满油量的时需加滑油 ___
A. A.1/4
B. B.1/2
C. C.3/4
D. D.5/8
【单选题】
(B737ng)空气循环机压缩机出口过热电门过热温度设定在___
A. 425 F
B. 390 F
C. 490 F
D. 250 F
【单选题】
(B737ng)空中飞行时热交换器的冷气流来自___
A. 冲压空气
B. 涡轮风扇引入的冷空气
C. 再循环风扇引入的冷空气
D. 发动机压气机的冷空气
【单选题】
(B737ng)如果空调自动控制失效,驾驶员可以通过P5板人工控制各区域温度的B737机型是___
A. 737-300/500
B. 737-700
C. 737-800
D. A&B
【单选题】
(B737ng)设备冷却系统中的低流量探测器探测到什么情况会发出警告:___
A. 设备冷却空气的流量过低
B. 设备冷却空气温度过高
C. 设备冷却空气温度过低
D. A OR B
【单选题】
(B737ng)水分离器的作用是 ___
A. 在进入涡轮前去除空气里的水分
B. 在空调系统中增加空气的水分含量
C. 在空调系统中增加水里的空气
D. 在空调系统的空气中去除多余的湿气
【单选题】
(B737ng)所谓非计划下降指的是___
A. 进入不正确的下降程序
B. 指飞机没有上升到飞行员认可的高度就下降
C. 飞行员选择的程序与正常的程序不同步
D. 指飞机没有进入等压程序就下降
【单选题】
(B737ng)下列关于压力控制器的说法正确的是 ___
A. A. 在地面状态,压力控制器不控制座跄高度.
B. B. 空中和地面状态,压力控制器都控制座舱高度.
C. C. AUTO FAIL(自动失效)灯亮表明,压力控制器故障,需转换到备用方式.
D. D. 拆下压力控制器,仍可用人工方式控制座舱压力.
【单选题】
(B737ng)下面关于前外流活门的说法错误的是:___
A. 再循环风扇工作,前放气活门不一定打开
B. 再循环风扇工作,前放气活门一定关闭
C. 后外流门全关,前外流门一定关闭
D. 后外流门全开,前外流门一定打开
【单选题】
(B737ng)现代大中型飞机空调组件的制冷方式属于___
A. 空气循环冷却系统
B. 冲压空气循环冷却系统
C. 蒸发循环冷却系统
D. 空气循环涡轮冷却系统和冲压空气热交换冷却系统
【单选题】
(B737ng)一个座舱压力控制器使用下列哪些调节参数:( )___
A. 引气压力、外界空气温度和座舱(高度)爬升率。
B. 场压压力、座舱高度和座舱高度变化率。
C. 座舱(高度)爬升率、引气体积和座舱压力。
D. 外界空气温度、座舱(高度)爬升率和座舱压力。
【单选题】
(B737ng)以下哪一个电门位置不是增压控制面板的工作模式___
A. AUTO
B. ALTN
C. MAN
D. MAN AC
【单选题】
(B737ng)由于737-3/4/5的设备冷却管道经常堵塞,737NG在这个系统做了什么改进___
A. 在电子舱设备冷却排气风扇处增加气滤
B. 在电子舱设备冷却供气风扇处增加气滤
C. 增加供气风扇的数量
D. 增加排气风扇的数量
【单选题】
(B737ng)在巡航过程中,“RAM DOOR FULL OPEN”灯亮可能是什么原因引起的?___
A. 冲压空气系统堵塞
B. 热交换器脏
C. 电控失效
D. 以上都有可能
【单选题】
(B737ng)在增压系统中安全释压活门的作用是___
A. 负压释压
B. 正常释压
C. 压力过小时释压
D. 压力过大时释压
【单选题】
(B737ng)增压的外流活门组件内共有几个马达___
A. 1
B. 2
C. 3
D. 4
【单选题】
(B737ng)正常情况下给IRU进行冷却的是:___
A. A. 正常的设备冷却供气风扇
B. B. 备用的设备冷却供气风扇
C. C. 正常的设备冷却排气风扇
D. D. 备用的设备冷却排气风扇
【单选题】
(B737ng)组件过热由哪个部件监控?___
A. 空气循环机(ACM)的压缩机出口过热电门
B. 组件出口管道过热电门
C. 空气循环机(ACM)的涡轮进口过热电门
D. 以上都是
【单选题】
(B737ng)关于再循环风扇___
A. 从前货舱后部接近
B. 安装时确保气流方向要正确
C. 再循环风扇单向活门确保安装的时候方向要正确
D. 以上都对
【单选题】
(B737ng)737NG飞机包括___
A. 737-300/500型飞机
B. 737-500/700型飞机
C. 737-700/800型飞机
D. 737-300/500/700/800型飞机
【单选题】
(B737ng)B737-800是一种:___
A. 宽体,远程喷气客机
B. 宽体,中短程喷气客机
C. 窄体,中短程喷气客机
D. 窄体,远程喷气客机
【单选题】
(B737ng)B737NG系统调节测试应该查哪种手册___
A. FIM
B. AMM PARTⅠ
C. AMM PARTⅡ P501
D. AMM PART Ⅱ P201
【单选题】
(B737ng)B737NG中的简写NG是什么意思___
A. Next Generation (下一代)
B. New Generation (新一代)
C. Next Grade (下一型号)
D. New Grade (新一型号)
【单选题】
(B737ng)飞机的顶点共有几个? ___
A. 3
B. 4
C. 6
D. 7
【单选题】
(B737ng)机上属于什么区域___
A. 100
B. 200
C. 300
D. 400
【单选题】
(B737ng)下列那种机型的机身最短___
A. 737-600
B. 737-700
C. 737-800
D. 737-900
【单选题】
(B737ng)有翼尖小翼的737NG的机型是___
A. 所有737-600
B. 所有737-700
C. 所有737-800
D. 最新的737-800
【单选题】
(B737ng)737NG机头的站位是___
A. STA 0
B. STA 100
C. STA 130
D. STA 178
【单选题】
(B737ng)B737NG的AMM中01-199页码内容说法正确的是___
A. B737NG没有01-199页
B. 用于系统描述
C. 用于部件定位
D. B&C对
【单选题】
(B737ng)B737NG的AMM中SDS描述正确的是___
A. 系统描述部分
B. AMM PARTⅠ
C. 以上都对
D. 以上都错,和AMM PART Ⅱ 没区别
【单选题】
(B737ng)FIM 中初始评估(Initial Evaluation)目的是:___
A. 判断该故障是否是间歇性的
B. 判断该故障可能的原因
C. 列出故障隔离的步骤
D. 列出该任务的参考信息
【单选题】
(B737ng)顶飞机时要确保飞机的水平,我们应该查什么手册___
A. AMM PARTⅠATA 5
B. AMM PARTⅠATA 8
C. AMM PARTⅡATA 5
D. AMM PARTⅡATA 8
欢迎使用我爱刷题
×
微信搜索我爱刷题小程序
温馨提示
×
请在电脑上登陆“www.woaishuati.com”使用