【单选题】
What happens to the status of users already logged into ESXi Shell when a vSphere administrator enables lockdown mode?___
A. Users remain logged in and can run commands, except to disable lockdown mode.
B. Users remain logged in and can run commands, including disabling lockdown mode.
C. Users are immediately logged out of ESXi Shell.
D. Users are logged out after a timeout specified by the vSphere administrator.
查看试卷，进入试卷练习
微信扫一扫，开始刷题
相关试题
【单选题】
What is the effective vSphere licensing level during the 60 day evaluation period?___
A. vSphere Foundation Essentials Plus
B. vSphere Standard
C. vSphere Enterprise
D. vSphere
E. nterprise Plus
【单选题】
To comply with security requirements, an administrator with a vCenter Server Appliance needs to force logoff of the vSphere web client after 10 minutes of inactivity.What should the administrator do to meet the requirement?___
A. Edit: /var/lib/vmware/vsphere-client/webclient.properties, modify session.timeout=10
B. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=600
C. Edit: /var/lib/vmware/vsphere-client/webclient.properties modify session.timeout=600
D. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=10
【单选题】
An administrator enables High Availability (HA) on a Virtual SAN cluster.Which network is used for HA Network Heatbeat configuration?___
A. The Management network.
B. The vMotion network.
C. The Virtual SAN network.
D. The Provisioning Traffic network.
【单选题】
A user wants to monitor a business-critical virtual machine to ensure that it doesn't run out of resources. What metric could be monitored in vRealize Operations to address this concern?___
A. Time Remaining badge
B. Compliance badge
C. Reclaimable Waste badge
D. Density badge
【单选题】
An administrator has recently installed a new ESXi 6.x Host, and during the configuration notices sporadic network problems. To check whether the issue occurred sometime during the configuration, the administrator would like to reset the system.How can this be accomplished in the shortest amount of time?___
A. Run the ESXi installer again and reinstall the host.
B. Select the Reset System Configuration option from the vSphere Client when connected directly to the host.
C. From the
D. irect Console User Interface, select Reset System Configuration.
【单选题】
A vApp is running out of compute resources when overall activity is high within the resource pool. At other times, everything is fine.What should be done to resolve this issue?___
A. Increase the size of the resource pool Shares.
B. Set the vApp's CPU and Memory Reservation Type to Expandable.
C. Set the vApp's CPU and Memory Limit to Unlimited.
D. Create a new resource pool with the existing hardware configuration.
【单选题】
A virtual machine has been renamed and an administrator is unable to find files with the new virtual machine name in the datastore.What is the reason for this?___
A. The names of the files on the datastore do not change.
B. The names of the files on the datastore have been corrupted.
C. The virtual machine needs to be re-added to the inventory.
D. The Distributed Resource Scheduler moved the virtual machine to another host.
【单选题】
An administrator has configured network connectivity for a new virtual machine, as shown in the Exhibit.What will occur with the network traffic of this virtual machine when communicating externally from vSwitch1?___
A. The virtual machine will communicate on both uplinks
B. The virtual machine will only communicate on vmnic1
C. The virtual machine will only communicate on vmnic2
D. The virtual machine will fail to communicate externally
【单选题】
An administrator is unable to create the first group in a new vRealize Operations environment. What is the likely cause of the problem?___
A. There are no group types defined.
B. The group is not defined in SSO.
C. There are more than 32 group types defined.
D. The description for the group is not provided.
【单选题】
A new vApp was built and tested in the corporate headquarters datacenter running vSphere 6.x. What condition would explain why the virtual machine is failing to boot in an offsite datacenter running on vSphere 5.5?___
A. The virtual machine was built with the default hardware version.
B. The VMFS 5 datastore is not compatible with virtual machines configured with vSphere 6.x.
C. a
D. RS 5.5 cluster cannot run virtual machines configured with vSphere 6.x.
【单选题】
An administrator is evaluating whether to deploy vCenter Server on a Windows server or on a vCenter Server appliance. The administrator has the following requirements: <A web browser will be utilized to manage the vSphere environment.> <16 ESXi hosts will be deployed.> <Licenses must be shared with a vCenter Server at another site.> <An external Oracle 10g database server will be used to host the vCenter Server database.> Why will the administrator need to deploy vCenter Server on a Windows server?___
A. Linked Mode is a requirement for the solution.
B. Oracle 10g is a requirement for the solution.
C. The vSphere web client is a requirement for the solution.
D. Management of more than 5 hosts is a requirement for the solution.
【单选题】
What is a benefit of using VMware Data Protection ?___
A. Provides support for guest-level backups and restores of Microsoft SQL Servers, Exchange Servers, and Share Point Servers.
B. Provides support for advanced storage services including replication, encryption, deduplication, and compression.
C. Provides direct access to VDP configuration integrated into the vSphere Client.
D. Reduces disk space consumed by virtual machine data using deduplication.
【单选题】
An administrator enables vSphere High Availability (HA) on an existing cluster with a large number of hosts and virtual machines. The administrator notices that the setup of vSphere HA on some of the hosts is failing. What step, if taken, might resolve this issue?___
A. Increase the value of the config.vpxd.das.electionWaitTimeSec setting.
B. Set the value of vpxd.das.aamMemoryLimit to 256.
C. Set the value of the das.useDefaultIsolationAddress setting to False.
D. Increase the value of the das.iostatsinterval setting.
【单选题】
An ESXi 6.x host consists of 24 logical cores. Hyperthreading is enabled on the host. What is the maximum number of vCPUs that can be assigned to a virtual machine on this host?___
【单选题】
By default, each ESXi 6.x host is provisioned with a certificate from which root certificate authority?___
A. RedHat Certificate Authority
B. VMware Certificate Authority
C. DigiCert Certificate Authority
D. Verisign Certificate Authority
【单选题】
An administrator is adding an NFS datastore as shown in the Exhibit. What is the purpose of the Servers to be added list?___
A. It contains the IP addresses of the NFS Storage Server to provide multipathing capability.
B. It contains the IP addresses of the ESXi hosts that mount the datastore.
C. It contains the IP addresses used for
D. ynamic Discovery of targets.
【单选题】
An administrator reports that the System Event log data is only available for 24 hours when reviewing the Hardware Status tab. Which condition could be responsible for the loss of data?___
A. A Reset event log was executed.
B. The statistical collection level was set to a value of 1.
C. The boot disk of the host is corrupt.
D. Syslog has been configured at the vCenter Server level.
【单选题】
During an upgrade, the ESXi 6.x installer finds an existing version of ESXi and a VMFS3 volume. No virtual machines exist on the host or VMFS3 volume. The requirement is to upgrade to VMFS5. Which option should be chosen to meet this requirement?___
A. Upgrade ESXi and preserve the VMFS datastore
B. Install ESXi and preserve the VMFS datastore
C. Install ESXi and overwrite the VMFS datastore
D. Upgrade
E. SXi and overwrite the VMFS datastore
【单选题】
A vSphere 6.x Standard Switch is configured with 4 virtual machine portgroups, as shown in the exhibit. Which portgroup would be utilized by default when creating a new virtual machine?___
A. Access Network
B. DMZ Network
C. VM Network
D. Virtual Machine Network
【单选题】
Which vSphere 6.x feature will allow an organization to utilize native snapshots?___
A. Virtual Volumes
B. Virtual SAN
C. VMFS3
D. VMFS5
【单选题】
An administrator is creating a new vSphere Distributed Switch that will be utilized with a specific vSphere Cluster. The cluster itself contains a mix of ESXi 5.x and 6.x Hosts. Which Distributed Switch version should be created to support this configuration?___
A. Distributed Switch: 6.0.0
B. Distributed Switch: 5.0.0
C. Distributed Switch: 5.1.0
D. Distributed Switch: 5.5.0
【单选题】
Which load balancing policy, previously limited to vSphere Distributed Switches, is now available on vSphere Standard Switches with vSphere 6.x?___
A. Route based on physical NIC workload
B. Route based on IP Hash
C. Route based on the originating virtual port
D. Route based on Source MAC Hash
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
An administrator has just completed performing an interactive installation of ESXi 6.x and is booting the host. How is the network initially configured?___
A. The network is configured by Automatic Private IP Addressing (APIPA).
B. The network is configured based on the settings detected in DNS.
C. The network is configured with the address as specified in the installer.
D. The network is automatically configured by DHCP.
【单选题】
You have just installed an ESXi 6.x Host. As part of your company security regulations, a security banner must be presented on the console of the host. How can this action be accomplished?___
A. Configure the Advanced Settings > Annotations screen of the ESXi host.
B. This is configured from the Direct Console User Interface configuration menu.
C. It is not possible to configure a security banner for the ESXi host.
D. From vCenter Server, this setting is configured globally in the vCenter Server configuration.
【单选题】
An administrator is only able to see the Health Badge when using the vRealize Operations user interface. What is the likely cause of this behavior?___
A. The vRealize Operations Foundation License is in use.
B. The vmware-sps service failed to start.
C. The vRealize Operations Standard License is in use.
D. The vmware-rbd-watchdog service failed to start.
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets either of these conditions: <High virtual CPU> <High active memory consumption.> <The alarm is only triggering when both of the conditions are met.> What can be done to correct the alarm behavior?___
A. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory and link them together with ESXCLI.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is attempting to restore a number of files in a directory within the Operating System of a virtual machine. How can the administrator restore the files from a previous backup? ___
A. Use the File Level Restore option from the selected backup of the virtual machine in the vSphere Web Client.
B. Connect to the File Level Restore tool from a web browser in the virtual machine.
C. Connect to the File Level Restore tool from the VMware
D. ata Protection appliance.
【单选题】
After selecting an object in vRealize Operations, how can a user compare the badge values of related child objects? ___
A. Use the Scoreboard tab
B. Use the Relationship tab
C. Use the Members tab
D. Use the Overview tab
【单选题】
You want to deploy a vApp and dynamically assign IP addresses without a DHCP server on the network. Which action would you take to accomplish this task? ___
A. Enable IP pools.
B. Configure a local DHCP server in the vApp.
C. Enable NAT on the vApp router.
D. Configure the guest OS for workgroup and WINS.
【单选题】
What is the optimal configuration when building a virtual machine for a single-threaded Windows application? ___
A. Deploy single-threaded applications on uniprocessor virtual machines.
B. Deploy single-threaded applications on symmetric multi-processor virtual machines.
C. Tune single-threaded applications to take advantage of symmetric multi-processor resources.
D. Tune Single-threaded applications at the hypervisor level.
【单选题】
An administrator has created the resource pool configuration shown in the Exhibit. Based on the exhibit, which virtual machine(s) can be successfully powered on? ___
A. VM-M1 only
B. VM-K1 only
C. VM-K1 and VM-K2 only
D. VM-K1, VM-K2, and VM-M1
【单选题】
Which vSphere 6 Enterprise Edition feature will allow an organization to ensure that critical multi-threaded applications have the maximum possible uptime? ___
A. Fault Tolerance
B. High Availability
C. Distributed Resource Scheduler
D. App HA
【单选题】
An administrator has a virtual machine that requires four times the compute resources than other virtual machines on the same ESXi 6.x host. How should the administrator configure the virtual machine settings, in order to be prepared for any resource contention? ___
A. Set the shares of the priority virtual machine to High and the rest to Low.
B. Set the shares of the priority virtual machine to High.
C. Set the shares of the priority virtual machine to High and the rest to Normal.
D. Set the shares of the priority virtual machine to Normal and the rest to Low.
【单选题】
Which type of Adapter does not require vmkernel networking? ___
A. Independent Hardware iSCSI Adapter
B. Dependent Hardware iSCSI Adapter
C. Software iSCSI Adapter
D. Software FCoE Adapter
【单选题】
During the installation of ESXi 6.0, the following error message is reported: Hardware Virtualization is not a feature of the CPU, or is not enabled in the BIOS. Which condition would generate this message? ___
A. LAHF/SAHF is not enabled in the BIOS.
B. NX/XD is not enabled in the BIOS.
C. SSE3 is not enabled in the BIOS.
D. Hyperthreading is not enabled in the BIOS.
【单选题】
An administrator is unable to login to vCenter Server when using the vSphere web client. The administrator successfully accessed vCenter Server using the client earlier the same day. What is the most appropriate first step the administrator should take to resolve this issue? ___
A. Verify the web browser being used has Adobe Flash plugin version 11.5 or later
B. Verify the vCenter Single Sign-On service is running on the vCenter Server
C. Verify the vSphere Web Server service is running on the vCenter Server
D. Verify the administrator has permissions configured in vCenter Server
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets two conditions: <high virtual CPU> <high active memory consumption> The alarm is malfunctioning and triggering when either condition is met instead of both. What can be done to correct the issue? ___
A. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory.
D. Delete the existing alarm and create a new event based alarm.
推荐试题
【多选题】
定线勘察阶段是查明沿线___，提出设计参数，确定穿越线路。
A. 工程地质
B. 水文地质条件
C. 环境对金属管道的腐蚀程度
D. 走向图
【多选题】
优化穿越线路，在场地条件允许的情况下，应___且（）穿越障碍物，减少地下占用空间；在有利轨迹设计、施工的情况下降低工程造价。
【多选题】
工作井技术要求： 井盖应设置二层子盖，并符合 GB/T 23858 的要求，尺寸标准化，具有___、（）、（）、防滑 、防位移、防坠落等功能；
【多选题】
___的综合会审，是保证工程统一管理的重要措施。
A. 施工图件
B. 相关技术内容
C. 设计图件
D. 技术措施
【多选题】
定向钻铺设直径在___以内的钢管多采用一定厚度的钢板先卷成圆筒，然后再焊接成型，最后再（）。
A. 1.0米
B. 2.0米
C. 作圆
D. 拉直
【多选题】
韧性是指钢管材塑性___和()过程中吸收的能量。
【多选题】
定向钻铺设PE管的设计内容包括：___的设计。
A. 管材运输
B. 焊接
C. 铺设工艺
D. 焊接工艺
【多选题】
为使生产管能顺利拉入孔内，管道的___和导向孔钻杆的()应相一致，避免两角度相左，造成刮孔和增大摩擦力。
A. 入土角
B. 出土角
C. 入射角
D. 出射角
【多选题】
电气操作人员（电工）应穿戴由绝缘材料制成的20KV（最小）的电力___；
A. 工作服
B. 工人靴
C. 手套
D. 安全帽
【多选题】
施工人员不应穿过于宽松的___，以免被机器卷入或牵绊；上岗必须佩戴安全帽。
【多选题】
合理安排电缆段长，尽量减少电缆接头的数量，严禁在变电站___等区域布置电力电缆接头。
A. 电缆夹层
B. 出站沟道
C. 竖井
D. 50米及以下桥架
【多选题】
___电缆非开挖定向钻拖拉管（）工作井不宜布置电力电缆接头。
A. 110kV
B. 220kV
C. 两端
D. 前端
【多选题】
电缆通道及直埋电缆线路工程应严格按照___施工，并同步进行竣工测绘，非开挖工艺的电缆通道应进行三维测绘。应在投运前向运维部门提交竣工资料和图纸。
A. 相关标准
B. 设计要求
C. 施工标准
D. 施工要求
【多选题】
投运___年及以上的非地下变电站接地网，应定期开挖（间隔不大于 5 年），抽检接地网的腐蚀情况，每站抽检（）个点。铜质材料接地体地网整体情况评估合格的不必定期开挖检查。
A. 5
B. 10
C. 5～8
D. 10～15
【多选题】
为防止地网中的大电流流经电缆___，应在开关场二次电缆沟道内沿二次电缆敷设截面积不小于100mm2的专用铜排（缆）。
A. 屏蔽层
B. 绝缘层
C. 100mm2
D. 200m2
【多选题】
专用铜排（缆）的一端在开关场的每个就地___处与主地网相连，另一端在（）的电缆沟道入口处与主地网相连，铜排不要求与电缆支架绝缘。
A. 端子箱
B. 保护室
C. 接地箱
D. 接地室
【多选题】
新投运变电站不同站用变压器低压侧至站用电屏的电缆应尽量___同沟敷设，对无法避免的，则应采取（）措施。
A. 使用
B. 避免
C. 封堵措施
D. 防火隔离
【多选题】
交直流回路（）共用一根电缆，控制电缆___与动力电缆并排铺设。对不满足要求的运行变电站，应采取加装防火隔离措施。
【多选题】
直流电源系统应采用()。两组及以上蓄电池组电缆，应分别铺设在各自独立的通道内，并尽量沿___路径敷设。在穿越电缆竖井时，两组蓄电池电缆应分别加穿金属套管。对不满足要求的运行变电站，应采取防火隔离措施。
A. 阻燃电缆
B. 最短
C. 普通电缆
D. 最长
【多选题】
变压器中、低压侧至配电装置采用电缆连接时，应采用___电缆；运行中的（）电缆，应结合全寿命周期及运行情况进行逐步改造。
A. 单芯
B. 三芯
C. 三相绕包
D. 三相统包
【多选题】
全电缆线路禁止采用重合闸，对于含电缆的混合线路应根据电缆线路___等实际情况采取停用重合闸等措施，防止变压器连续遭受短路冲击。
A. 距离入口的位置
B. 电缆的长度
C. 距离出口的位置
D. 电缆线路的比例
【多选题】
扩孔的目的是将孔径扩大至能容纳所要铺设的生产管线大小要求，最终扩孔直径大小应根据___和（）确定。
A. 地形条件
B. 生产条件
C. 地层条件
D. 生产管道类型
【判断题】
开挖技术是在不开挖地表的条件下或以最小的地表开挖工作量进行各种中小直径地下管线铺设、更换、修复和定位的施工技术。
【判断题】
水平定向钻孔是利用水平定向钻机以不可控钻孔轨迹的施工方法，在相同地层和深度进行钻进，通过导向系统使钻头沿着设计方向（轨迹）钻进并到达设计位置出口。
【判断题】
起始工作坑是为水平定向钻进施工导向孔、扩孔钻进及拉管就位存储、回收泥浆和确定起始入口位置而开挖的工作坑。
【判断题】
出口工作坑是为回收、储存水平定向钻进施工中排出的泥浆和确定出口位置而开挖的工作坑。
【判断题】
穿越是在地表下避开障碍物进行开挖铺设管线。
【判断题】
钻井泥浆是指水和膨润土或聚合物的混合物，有时还需加入某些处理剂主要用于钻进施工中的冷却、润滑钻具、护壁和悬浮携带岩屑。
【判断题】
导向孔是利用水平定向钻机，沿设计轨迹施工完成的初始钻孔。
【判断题】
导向孔轨迹是导向孔钻进时，导向钻头移动路线的变化位置。
【判断题】
入、出土角是在水平定向钻进，施工过程中钻头进入地层或从地层钻出时，钻杆柱与水平面的夹角。
【判断题】
顶角是钻孔轴线在给定点的切线与通过该点与垂直面之间的夹角。
【判断题】
钻孔轴线在水平面上的投影或钻孔轴线在给定点上的切线在水平面上的投影与正北方向之间的夹角。
【判断题】
导向系统是提供方位角、顶角及导向孔施工状态等参数的系统。
【判断题】
扩孔是为达到与水平定向钻进管线铺设相适应的孔径，用回扩钻头缩小孔径的施工过程。
【判断题】
回啦是生产管通过钻杆从钻孔的出土点一侧，沿扩孔后的孔洞，回拉至钻杆入土点一侧的施工过程，亦称拉管就位。
【判断题】
生产管是为各种建设目的而铺设的各类永久性地下管线。
【判断题】
水平定向钻进导向孔施工过程，连续不断地检测有关钻孔信息的测量技术。
【判断题】
工程设计前应进行工程勘察，调查分析施工区域内有关各方面情况，充分掌握现场资料。
【判断题】
非定向钻铺管使用管材通常为钢管、PE管和PVC管等，其材质及性能应符合国家有关现行标准及相应规定。
