【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
查看试卷，进入试卷练习
微信扫一扫，开始刷题
相关试题
【单选题】
An administrator has just completed performing an interactive installation of ESXi 6.x and is booting the host. How is the network initially configured?___
A. The network is configured by Automatic Private IP Addressing (APIPA).
B. The network is configured based on the settings detected in DNS.
C. The network is configured with the address as specified in the installer.
D. The network is automatically configured by DHCP.
【单选题】
You have just installed an ESXi 6.x Host. As part of your company security regulations, a security banner must be presented on the console of the host. How can this action be accomplished?___
A. Configure the Advanced Settings > Annotations screen of the ESXi host.
B. This is configured from the Direct Console User Interface configuration menu.
C. It is not possible to configure a security banner for the ESXi host.
D. From vCenter Server, this setting is configured globally in the vCenter Server configuration.
【单选题】
An administrator is only able to see the Health Badge when using the vRealize Operations user interface. What is the likely cause of this behavior?___
A. The vRealize Operations Foundation License is in use.
B. The vmware-sps service failed to start.
C. The vRealize Operations Standard License is in use.
D. The vmware-rbd-watchdog service failed to start.
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets either of these conditions: <High virtual CPU> <High active memory consumption.> <The alarm is only triggering when both of the conditions are met.> What can be done to correct the alarm behavior?___
A. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory and link them together with ESXCLI.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is attempting to restore a number of files in a directory within the Operating System of a virtual machine. How can the administrator restore the files from a previous backup? ___
A. Use the File Level Restore option from the selected backup of the virtual machine in the vSphere Web Client.
B. Connect to the File Level Restore tool from a web browser in the virtual machine.
C. Connect to the File Level Restore tool from the VMware
D. ata Protection appliance.
【单选题】
After selecting an object in vRealize Operations, how can a user compare the badge values of related child objects? ___
A. Use the Scoreboard tab
B. Use the Relationship tab
C. Use the Members tab
D. Use the Overview tab
【单选题】
You want to deploy a vApp and dynamically assign IP addresses without a DHCP server on the network. Which action would you take to accomplish this task? ___
A. Enable IP pools.
B. Configure a local DHCP server in the vApp.
C. Enable NAT on the vApp router.
D. Configure the guest OS for workgroup and WINS.
【单选题】
What is the optimal configuration when building a virtual machine for a single-threaded Windows application? ___
A. Deploy single-threaded applications on uniprocessor virtual machines.
B. Deploy single-threaded applications on symmetric multi-processor virtual machines.
C. Tune single-threaded applications to take advantage of symmetric multi-processor resources.
D. Tune Single-threaded applications at the hypervisor level.
【单选题】
An administrator has created the resource pool configuration shown in the Exhibit. Based on the exhibit, which virtual machine(s) can be successfully powered on? ___
A. VM-M1 only
B. VM-K1 only
C. VM-K1 and VM-K2 only
D. VM-K1, VM-K2, and VM-M1
【单选题】
Which vSphere 6 Enterprise Edition feature will allow an organization to ensure that critical multi-threaded applications have the maximum possible uptime? ___
A. Fault Tolerance
B. High Availability
C. Distributed Resource Scheduler
D. App HA
【单选题】
An administrator has a virtual machine that requires four times the compute resources than other virtual machines on the same ESXi 6.x host. How should the administrator configure the virtual machine settings, in order to be prepared for any resource contention? ___
A. Set the shares of the priority virtual machine to High and the rest to Low.
B. Set the shares of the priority virtual machine to High.
C. Set the shares of the priority virtual machine to High and the rest to Normal.
D. Set the shares of the priority virtual machine to Normal and the rest to Low.
【单选题】
Which type of Adapter does not require vmkernel networking? ___
A. Independent Hardware iSCSI Adapter
B. Dependent Hardware iSCSI Adapter
C. Software iSCSI Adapter
D. Software FCoE Adapter
【单选题】
During the installation of ESXi 6.0, the following error message is reported: Hardware Virtualization is not a feature of the CPU, or is not enabled in the BIOS. Which condition would generate this message? ___
A. LAHF/SAHF is not enabled in the BIOS.
B. NX/XD is not enabled in the BIOS.
C. SSE3 is not enabled in the BIOS.
D. Hyperthreading is not enabled in the BIOS.
【单选题】
An administrator is unable to login to vCenter Server when using the vSphere web client. The administrator successfully accessed vCenter Server using the client earlier the same day. What is the most appropriate first step the administrator should take to resolve this issue? ___
A. Verify the web browser being used has Adobe Flash plugin version 11.5 or later
B. Verify the vCenter Single Sign-On service is running on the vCenter Server
C. Verify the vSphere Web Server service is running on the vCenter Server
D. Verify the administrator has permissions configured in vCenter Server
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets two conditions: <high virtual CPU> <high active memory consumption> The alarm is malfunctioning and triggering when either condition is met instead of both. What can be done to correct the issue? ___
A. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
What must be enabled to ensure that VM Component Protection (VMCP) works in a High Availability cluster? ___
A. VMware Tools Virtual Machine Communication Interface (VMCI)
B. Fault Tolerance
C. Atomic Test and Set (ATS)
D. All Paths Down (APD) Timeout
【单选题】
An administrator wants to add a web server to an existing multi-tier application consisting of three virtual machines: <A web server> <A database server An application server> The web server should be added to the application when the primary web server reaches: <70% vCPU utilization> <55% active memory> Which option will achieve this result? ___
A. Create a virtual machine alarm with an action to run a script that starts a new instance of the web server.
B. Create a host cpu and memory alarm with an action to run a script that starts a new instance of the webserver.
C. Configure HA application monitoring for the web server and set it to trigger deployment of a new instance of the web server.
D. Configure Fault Tolerance on the virtual machine and leave the secondary machine disabled until needed.
【单选题】
An administrator has an application that requires connection directly to PCI devices through a virtual machine. What is a limitation of this configuration? ___
A. Devices must be reserved for PCI passthrough on at least one host on which the virtual machine will run.
B. Snapshots are not supported with DirectPath I/O passthrough devices.
C. A maximum of 18 PCI vSphere
D. irectPath devices can be added to a virtual machine.
【单选题】
The vSphere administrator is configuring directory services for an ESXi host: What should the vSphere administrator do to configure the host to use CAM services? ___
A. Check the Use vSphere Authentication Proxy checkbox.
B. Set Select Directory Service Type to CAM services.
C. Specify CAM$ for the
D. omain.
【单选题】
Which statement is true regarding the licensing of vCenter Server? ___
A. The license for vCenter Server must be provided at the time of installation.
B. Changing the license assigned to vCenter Server requires a restart of the vCenter Server service.
C. Virtual machines can still be powered on if the vCenter Server license expires.
D. Licensing for a single vCenter Server installation is determined by the number of managed virtual machines.
【单选题】
When configuring vSphere Replication for a virtual machine, what is the lowest Recovery Point Objective (RPO) that can be selected? ___
A. 1 min
B. 5 min
C. 10 min
D. 15min
【单选题】
A developer needs to create a multi-tier development stack for a home lab. Which vSphere product will support the architecture required for the least software cost? ___
A. vSphere Hypervisor
B. vSphere Essentials
C. VMware Player
D. VMware Workstation
【单选题】
An administrator is installing Windows into a virtual machine. The DVD has been mounted on the Host and configured for the virtual machine as shown in the Exhibit. Based on the exhibit, when the virtual machine is booted, why would it attempt to search for a PXE server? ___
A. The CD/DVD device is not connected.
B. The ISO is in the incorrect storage location.
C. The OS minimum requirements have not been met.
D. The CD/DVD device is not set to Client Device.
【单选题】
What component must be installed prior to deploying a vCenter Server in vSphere 6.x? ___
A. vCenter Identity Services
B. Platform Services Controller
C. vCenter Single Sign-On
D. Client Integration Plug-In
【单选题】
What is a valid plug-in status for a plug-in that has been added to a vSphere client? ___
A. Disabled
B. Unknown
C. Stopped
D. Installed
【单选题】
Users of an application are reporting performance issues. The following performance values are observed in the vSphere Web Client: <Host CPU utilization is 90%> <Virtual Machine memory utilization is consistently greater than 90% CPU Ready values are higher than 20%> What could be the cause of the application performance issue? ___
A. The host is lacking the CPU resources required to meet the demand.
B. The host is lacking the memory resources required to meet the demand.
C. The virtual machine is lacking the CPU resources required to meet the demand.
D. The virtual machine is lacking the memory resources required to meet the demand.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is re-provisioning an ESXi host and moving it to another datacenter. Which DCUI option should the administrator use to revert the system configuration to the default settings? ___
A. Reset System Configuration
B. Rebuild Default System Configuration
C. Revert System Configuration
D. Renew Default System Configuration
【单选题】
An administrator has just completed installing an ESXi 6.x host, but doesn't know what address has been configured. Where is the ESXi host IP address configured? ___
A. RVC console
B. Direct Console User Interface
C. vSphere Web Client
D. vSphere Client
【单选题】
When is it possible to place a VMFS5 datastore in maintenance mode? ___
A. When it is a member of a Storage DRS cluster
B. When it is a member of Virtual SAN cluster
C. When it is a member of a multi-extent datastore
D. When it is a member of a Virtual Volume
【单选题】
Immediately after installing ESXi, an administrator observes that the Configure Lockdown Mode option is grayed out in the Direct Console User Interface (DCUI). What is the most likely explanation? ___
A. The host has not yet been added to a vCenter Server.
B. The BIOS on the host does not have NX/XD enabled.
C. The ESXi host is running in evaluation mode.
D. The host requires a reboot before this feature is available.
【单选题】
Immediately after installing ESXi, an administrator observes that the Configure Lockdown Mode option is grayed out in the Direct Console User Interface (DCUI). What is the most likely explanation? ___
A. The host has not yet been added to a vCenter Server.
B. The BIOS on the host does not have NX/XD enabled.
C. The ESXi host is running in evaluation mode.
D. The host requires a reboot before this feature is available.
【单选题】
Which Single Sign-On deployment mode should an administrator use for two 6.x vCenter Servers configured with linked mode? ___
A. Basic Single Sign-On with vCenter Server Heartbeat
B. Multisite Single Sign-On
C. Basic Single Sign-On
D. Single Sign-On with Linked Mode
【单选题】
What is required when changing a virtual machine name using the vSphere Web Client? ___
A. Verify connectivity to the ESXi host where the virtual machine is running and its inventory list is accessible.
B. Verify in which datastore the virtual machine resides and that you have access and its inventory list is accessible.
C. Verify that virtual machine files are stored in the same datastore and can be accessed in the datastore browser list.
D. Verify the virtual machine is not running in Fault Tolerant mode and that it is not in a Distributed Resource Scheduler cluster.
【单选题】
An administrator deploys vRealize Operations into a vSphere 6.x environment. After the deployment, the administrator notices that badges are not appearing. What is a likely cause of this behavior? ___
A. Badges do not appear until you register vRealize Operations with vCenter Server.
B. Badges do not appear until you register a vCenter Server in vRealize Operations.
C. The vRealize Operations appliance needs to be redeployed.
D. The vCenter Server appliance needs to be redeployed.
【单选题】
How are ports scaled on vSphere Standard Switches (vSS)? ___
A. Ports on a vSS can be dynamically scaled up and down.
B. Ports on a vSS can only be statically scaled up or down.
C. Ports on a vSS can only be dynamically scaled down.
D. Ports on a vSS can only be dynamically scaled up.
【单选题】
A High Availability (HA) cluster is configured to respond to a given number of host failures. The cluster contains virtual machines configured with these settings: VM1 has a 1GHz CPU reservation and no Memory reservation VM2 has a 2GHz CPU reservation and no Memory reservation VM3 has no CPU reservation and no Memory reservation . Given this information, what is the correct slot size for the cluster? ___
A. The CPU Reservation should be set to 32MHz and the memory reservation should be set to 32MB plus memory overhead.
B. The CPU reservation should be set to 1 GHz and the memory reservation should be set to 0MB plus memory overhead.
C. The CPU reservation should be set to 2 GHz, and the memory reservation should be set to 0MB plus the virtual machine memory overhead.
D. The CPU reservation should be set to 2 GHz, and the memory reservation should be set to 32MB, plus the virtual machine memory overhead.
【单选题】
An administrator is planning a vSphere infrastructure with the following specific networking requirements: <The ability to shape inbound (RX) traffic> <Support for Private VLANs (PVLANs)> <Support for LLDP (Link Layer Discovery Protocol)>. What is the minimum vSphere Edition that will support these requirements? ___
A. vSphere Essentials Plus
B. vSphere Standard
C. vSphere Enterprise
D. vSphere
E. nterprise Plus
【单选题】
When you add an ESXi 6.x host to a new Cluster, which vSphere object owns the CPU and Memory resources of the hosts? ___
A. vCenter Server
B. Datacenter
C. Cluster
D. Host
推荐试题
【多选题】
运营单位应在年度演练计划周期结束后 个工作日内，将演练总结报告报送城市轨道交通运营主管部门。演练总结报告应包括、及等内容。___
A. 15
B. 20
C. 演练计划完成情况
D. 演练总体评估情况
E. 整改情况
【多选题】
城市轨道交通运营主管部门应对运营单位应急演练工作情况开展监督，重点检查运营单位 、 、 、 等，对于未按规定开展应急演练、演练 的，要及时督促整改并纳入相关考核。___
A. 演练计划落实情况
B. 演练记录
C. 演练评估
D. 整改情况
E. 流于形式或弄虚作假
【多选题】
为规范城市轨道交通运营险性事件的信息报告与分析工作，提升运营安全管理水平，依据等 、 、 、 、法律、行政法规和相关规定，制定本办法___
A. 《生产安全事故报告和调查处理条例》
B. 《国家城市轨道交通运营突发事件应急预案》
C. 《国务院办公厅关于保障城市轨道交通安全运行的意见》
D. 《城市轨道交通运营管理规定》
【多选题】
等城市轨道交通运营险性事件的信息报告与分析工作适用本办法。___
A. 地铁
B. 轻轨
C. 有轨电车
D. BRT
【多选题】
城市轨道交通运营险性事件是指在城市轨道交通运营过程中因隐患排查治理不到位造成风险失控而发生的，对城市轨道交通 和服务造成 影响的事件___
A. 运营安全
B. 运营服务
C. 较大
D. 较小
【多选题】
城市轨道交通运营险性事件达到国务院规定的事故等级的，按国务院规定的等级和分类标准，分为 、 、 和 。___
A. 特别重大事故
B. 重大事故
C. 较大事故
D. 一般事故
【多选题】
城市轨道交通所在地 或者 指定的城市轨道交通运营主管部门（以下统称城市轨道交通运营主管部门）负责监督管理本行政区域内城市轨道交通运营险性事件的报告与分析工作___
A. 城市交通运输主管部门
B. 城市人民政府
C. 交通运输主管部门
D. 省政府
【多选题】
对跨城市运营的城市轨道交通线路，由线路所在城市的城市轨道交通运营主管部门协商确定运营险性事件与的分工和职责___
A. 定责
B. 报告
C. 分析工作
D. 处罚
【多选题】
发生运营险性事件的，城市轨道交通运营单位（以下简称运营单位）应在 小时内向城市轨道交通运营主管部门报告。城市轨道交通运营主管部门应将信息逐级上报至交通运输部，每级上报时限不超过 小时，重大情况可越级上报。___
【多选题】
其中构成 和 运营安全事故的，按照国务院规定报告。___
A. 特别重大
B. 重大
C. 较大
D. 一般
【多选题】
报告运营险性事件应包括下列内容___
A. 发生单位；发生的时间、地点、现场情况及简要经过；已经造成或者可能造成的伤亡人数（包括下落不明的人数）和初步估计的直接经济损失；
B. 已经采取的措施；对运营造成的影响；
C. 初步原因分析；下一步措施和需要协调事项；
D. 其他应报告的情况
【多选题】
相关单位和个人应配合开展运营险性事件技术分析工作，按要求及时提供相关技术、和，并对所提供材料的真实性负责。___
【多选题】
运营险性事件技术分析工作应坚持客观公正的原则，真实还原事发经过，形成运营险性事件技术分析报告，报告应包括以下内容：___
A. 发生单位概况；发生经过和处置情况；
B. 造成的人员受伤和直接经济损失；
C. 事件发生的原因分析；
D. 事件整改与防范措施有关图文、视频、音频、数据等资料。
【多选题】
运营单位应在形成运营险性事件技术分析报告后 个工作日内，报送至城市轨道交通运营主管部门。城市轨道交通运营主管部门应在收到报告后逐级报送至交通运输部，每级报送时限不超过个 工作日。___
【多选题】
和 运营安全事故调查报告批复后，城市轨道交通运营主管部门应逐级报送至交通运输部，每级报送时限不超过10个工作日。___
A. 特别重大
B. 重大
C. 较大
D. 一般
【多选题】
运营单位应按年度对本单位城市轨道交通运营险性事件的 、 、 、 ，以及既往运营险性事件整改及防范措施实施效果等进行总结评估，形成书面报告并及时报送至城市轨道交通运营主管部门。___
A. 发生情况
B. 发生原因
C. 发展趋势
D. 变化规律
【多选题】
城市轨道交通运营主管部门应督促运营单位及时对本单位发生的运营险性事件制作安全警示片等多种形式的安全警示材料，开展警示教育活动。安全警示片内容应包括运营险性事件 、 、 、 等。___
A. 基本情况
B. 主要原因
C. 造成后果
D. 经验教训
【多选题】
交通运输部根据行业运营安全动态，不定期发布 、 、 ， 、动态跟踪行业安全态势，提出行业安全发展策略。___
A. 警示案例
B. 情况通报
C. 分析报告
D. 持续记录
【多选题】
脱轨是指车辆在 、 、 等线路运行时，车轮落下轨面（包括脱轨后又自行复轨）或车轮轮缘顶部高于轨面（因作业需要的除外）而脱离轨道。___
A. 辅助线
B. 正线
C. 配线
D. 车场线
【多选题】
冲突是指在 、 、 等线路，列车、机车车辆相互间或与工程车、设备设施（如车库、站台、车档等）发生冲撞。___
A. 辅助线
B. 正线
C. 配线
D. 车场线
【多选题】
冲突是指在正线、配线、车场线等线路， 、 相互间或与 、 （如车库、站台、车档等）发生冲撞。___
A. 列车
B. 机车车辆
C. 工程车
D. 设备设施
【多选题】
撞击是指在 、 、 等线路，列车或机车车辆在运行过程中与行人、机动车、非机动车及其他障碍物发生碰、撞、轧。其他障碍物是指声屏障、防火门、人防门、防淹门等构筑物及射流风机、电缆、管线等吊挂构件或其他设备脱落侵入限界。___
A. 辅助线
B. 正线
C. 配线
D. 车场线
【多选题】
撞击是指在正线、配线、车场线等线路，列车或机车车辆在运行过程中与 、 、 及 发生碰、撞、轧。其他障碍物是指声屏障、防火门、人防门、防淹门等构筑物及射流风机、电缆、管线等吊挂构件或其他设备脱落侵入限界。___
A. 行人
B. 机动车
C. 非机动车
D. 其他障碍物
【多选题】
其他障碍物是指 、 、 、 等构筑物及射流风机、电缆、管线等吊挂构件或其他设备脱落侵入限界。___
A. 声屏障
B. 防火门
C. 人防门
D. 防淹门
【多选题】
挤岔是指在 、 、 等线路，由于道岔位置不正确、尖轨未能与基本轨密贴，导致列车通过道岔时将尖轨与基本轨挤开或挤坏过程，造成尖轨弯曲变形、转辙机损坏。___
A. 辅助线
B. 正线
C. 配线
D. 车场线
【多选题】
挤岔是指在正线、配线、车场线等线路，由于道岔位置不正确、尖轨未能与基本轨密贴，导致列车通过道岔时将尖轨与基本轨挤开或挤坏过程，造成 。___
A. 尖轨弯曲
B. 尖轨变形
C. 转辙机损坏
D. 钢轨磨损
【多选题】
淹水倒灌是指雨水等通过出入口、风亭、过渡段洞口等倒灌车站和轨行区，导致车站公共区积水浸泡或漫过钢轨轨面。___
A. 车站
B. 轨行区
C. 公共区域
D. 其他
【多选题】
车站、轨行区淹水倒灌是指雨水等通过 等倒灌车站和轨行区，导致车站公共区积水浸泡或漫过钢轨轨面。___
A. 出入口
B. 风亭
C. 过渡段洞口
D. 隧道
【多选题】
大面积停电是指单个及以上 范围全部停电。___
A. 车站
B. 变电所
C. 控制中心
D. 车辆基地
【多选题】
通讯网络瘫痪是指 等中断30分钟（含）以上。___
A. 行车调度指挥通讯
B. 车地无线通讯
C. 通讯网络传输系统
D. 网络系统
【多选题】
信号系统重大故障是指 均无法监控列车运行或 错误持续60分钟（含）以上。___
A. LCP
B. 中央和本地自动监控系统（ATS）
C. 联锁故障
D. 设备故障
【多选题】
电梯和自动扶梯重大故障是指载客电梯运行中发生 ___
A. 冲顶
B. 坠落
C. 电梯轿厢滞留人员90分钟（含）以上
D. 自动扶梯发生逆行、溜梯。
【多选题】
夹人夹物动车是指 ___
A. 乘客夹在列车车门或站台门时动车
B. 物品夹在列车车门或站台门时动车
C. 乘客或物品夹在列车和站台门之间时动车
【多选题】
制定《城市轨道交通行车组织管理办法》的目的包含 。___
A. 规范城市轨道交通行车组织
B. 保障城市轨道交通安全运行
C. 提高服务质量
D. 促进城市轨道交通行业健康发展
【多选题】
等城市轨道交通的行车组织工作适用《城市轨道交通行车组织管理办法》___
【多选题】
城市轨道交通行车组织工作应坚持问题导向，贯彻 的原则。___
A. 高度集中
B. 集中指挥
C. 统一指挥
D. 逐级负责
【多选题】
城市轨道交通运营单位应统筹内部各专业部门，合理制定行车计划，内容包括 。___
A. 列车运行图
B. 车辆运用计划
C. 施工作业计划
D. 乘务计划
【多选题】
运营单位应做好 、信号、机电等设施设备的运行维护工作。___
A. 土建工程
B. 车辆
C. 供电
D. 通信
【多选题】
列车运行图应保持相对稳定，需要常态化 的，运营单位应充分论证运用车数量、线路条件等 设施设备能力及施工维修时间、人员配备需要等情况。___
A. 缩短运营服务时间
B. 延长运营服务时间
C. 缩小行车间隔
D. 扩大行车间隔
【多选题】
行车指挥层级自上而下分为 ，下级服从上级指挥。___
A. 线网监控级
B. 线路控制级
C. 中央控制级
D. 现场执行级
