【判断题】
刮削大型机床导轨面时，应在将导轨面上的零件全部拆除后进行，以保证刮削质量
查看试卷，进入试卷练习
微信扫一扫，开始刷题
相关试题
【判断题】
要安排好培训计划，做好上课的准备工作，做到有组织，有计划地进行培训，做到定时间，定地点，定内容，定进度，定要求，有练习，有考核
【判断题】
轨道制作主要是轨道调直和接头，调直后对轨道进行编号，两条轨道上从端部或伸缩缝处算起，轨道接头至少要对齐，以使运转平稳
【判断题】
为实现电动机连续正转运行需采用具有接触器自锁的控制线路和手动正转控制回路
【判断题】
在修理带传动机构时，发现带轮孔超差额0.08mm，造成配合过松，一般可用镀铬法来加大轴颈尺寸
【判断题】
用经纬仪和平行光管测量机床转台分度误差时，应用专用心轴配装在转台中心孔中将经纬仪和心轴紧固联接在一起
【判断题】
采用双螺母螺纹式调整滚珠丝杠轴向间隙的方法结构紧凑，调整方便，应用广泛
【判断题】
若自准直仪上读数鼓轮每格角值分度值为1"，则其线值分度值可用0.05mm/m表示
【判断题】
所有的紫色酒精，在 1 米内不准点有明火，不准放在暖气片上
【判断题】
固定式装配适用于单件和小批量模具的装配，以及装配精度要求较高，需要调整的部位较多的装配
【判断题】
我国对企业发生的事故，坚持“四不放过”原则进行处理
【判断题】
在机械设备中，凸轮表面误差将会引起扭转振动
【单选题】
What happens to the status of users already logged into ESXi Shell when a vSphere administrator enables lockdown mode?___
A. Users remain logged in and can run commands, except to disable lockdown mode.
B. Users remain logged in and can run commands, including disabling lockdown mode.
C. Users are immediately logged out of ESXi Shell.
D. Users are logged out after a timeout specified by the vSphere administrator.
【单选题】
What is the effective vSphere licensing level during the 60 day evaluation period?___
A. vSphere Foundation Essentials Plus
B. vSphere Standard
C. vSphere Enterprise
D. vSphere
E. nterprise Plus
【单选题】
To comply with security requirements, an administrator with a vCenter Server Appliance needs to force logoff of the vSphere web client after 10 minutes of inactivity.What should the administrator do to meet the requirement?___
A. Edit: /var/lib/vmware/vsphere-client/webclient.properties, modify session.timeout=10
B. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=600
C. Edit: /var/lib/vmware/vsphere-client/webclient.properties modify session.timeout=600
D. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=10
【单选题】
An administrator enables High Availability (HA) on a Virtual SAN cluster.Which network is used for HA Network Heatbeat configuration?___
A. The Management network.
B. The vMotion network.
C. The Virtual SAN network.
D. The Provisioning Traffic network.
【单选题】
A user wants to monitor a business-critical virtual machine to ensure that it doesn't run out of resources. What metric could be monitored in vRealize Operations to address this concern?___
A. Time Remaining badge
B. Compliance badge
C. Reclaimable Waste badge
D. Density badge
【单选题】
An administrator has recently installed a new ESXi 6.x Host, and during the configuration notices sporadic network problems. To check whether the issue occurred sometime during the configuration, the administrator would like to reset the system.How can this be accomplished in the shortest amount of time?___
A. Run the ESXi installer again and reinstall the host.
B. Select the Reset System Configuration option from the vSphere Client when connected directly to the host.
C. From the
D. irect Console User Interface, select Reset System Configuration.
【单选题】
A vApp is running out of compute resources when overall activity is high within the resource pool. At other times, everything is fine.What should be done to resolve this issue?___
A. Increase the size of the resource pool Shares.
B. Set the vApp's CPU and Memory Reservation Type to Expandable.
C. Set the vApp's CPU and Memory Limit to Unlimited.
D. Create a new resource pool with the existing hardware configuration.
【单选题】
A virtual machine has been renamed and an administrator is unable to find files with the new virtual machine name in the datastore.What is the reason for this?___
A. The names of the files on the datastore do not change.
B. The names of the files on the datastore have been corrupted.
C. The virtual machine needs to be re-added to the inventory.
D. The Distributed Resource Scheduler moved the virtual machine to another host.
【单选题】
An administrator has configured network connectivity for a new virtual machine, as shown in the Exhibit.What will occur with the network traffic of this virtual machine when communicating externally from vSwitch1?___
A. The virtual machine will communicate on both uplinks
B. The virtual machine will only communicate on vmnic1
C. The virtual machine will only communicate on vmnic2
D. The virtual machine will fail to communicate externally
【单选题】
An administrator is unable to create the first group in a new vRealize Operations environment. What is the likely cause of the problem?___
A. There are no group types defined.
B. The group is not defined in SSO.
C. There are more than 32 group types defined.
D. The description for the group is not provided.
【单选题】
A new vApp was built and tested in the corporate headquarters datacenter running vSphere 6.x. What condition would explain why the virtual machine is failing to boot in an offsite datacenter running on vSphere 5.5?___
A. The virtual machine was built with the default hardware version.
B. The VMFS 5 datastore is not compatible with virtual machines configured with vSphere 6.x.
C. a
D. RS 5.5 cluster cannot run virtual machines configured with vSphere 6.x.
【单选题】
An administrator is evaluating whether to deploy vCenter Server on a Windows server or on a vCenter Server appliance. The administrator has the following requirements: <A web browser will be utilized to manage the vSphere environment.> <16 ESXi hosts will be deployed.> <Licenses must be shared with a vCenter Server at another site.> <An external Oracle 10g database server will be used to host the vCenter Server database.> Why will the administrator need to deploy vCenter Server on a Windows server?___
A. Linked Mode is a requirement for the solution.
B. Oracle 10g is a requirement for the solution.
C. The vSphere web client is a requirement for the solution.
D. Management of more than 5 hosts is a requirement for the solution.
【单选题】
What is a benefit of using VMware Data Protection ?___
A. Provides support for guest-level backups and restores of Microsoft SQL Servers, Exchange Servers, and Share Point Servers.
B. Provides support for advanced storage services including replication, encryption, deduplication, and compression.
C. Provides direct access to VDP configuration integrated into the vSphere Client.
D. Reduces disk space consumed by virtual machine data using deduplication.
【单选题】
An administrator enables vSphere High Availability (HA) on an existing cluster with a large number of hosts and virtual machines. The administrator notices that the setup of vSphere HA on some of the hosts is failing. What step, if taken, might resolve this issue?___
A. Increase the value of the config.vpxd.das.electionWaitTimeSec setting.
B. Set the value of vpxd.das.aamMemoryLimit to 256.
C. Set the value of the das.useDefaultIsolationAddress setting to False.
D. Increase the value of the das.iostatsinterval setting.
【单选题】
An ESXi 6.x host consists of 24 logical cores. Hyperthreading is enabled on the host. What is the maximum number of vCPUs that can be assigned to a virtual machine on this host?___
【单选题】
By default, each ESXi 6.x host is provisioned with a certificate from which root certificate authority?___
A. RedHat Certificate Authority
B. VMware Certificate Authority
C. DigiCert Certificate Authority
D. Verisign Certificate Authority
【单选题】
An administrator is adding an NFS datastore as shown in the Exhibit. What is the purpose of the Servers to be added list?___
A. It contains the IP addresses of the NFS Storage Server to provide multipathing capability.
B. It contains the IP addresses of the ESXi hosts that mount the datastore.
C. It contains the IP addresses used for
D. ynamic Discovery of targets.
【单选题】
An administrator reports that the System Event log data is only available for 24 hours when reviewing the Hardware Status tab. Which condition could be responsible for the loss of data?___
A. A Reset event log was executed.
B. The statistical collection level was set to a value of 1.
C. The boot disk of the host is corrupt.
D. Syslog has been configured at the vCenter Server level.
【单选题】
During an upgrade, the ESXi 6.x installer finds an existing version of ESXi and a VMFS3 volume. No virtual machines exist on the host or VMFS3 volume. The requirement is to upgrade to VMFS5. Which option should be chosen to meet this requirement?___
A. Upgrade ESXi and preserve the VMFS datastore
B. Install ESXi and preserve the VMFS datastore
C. Install ESXi and overwrite the VMFS datastore
D. Upgrade
E. SXi and overwrite the VMFS datastore
【单选题】
A vSphere 6.x Standard Switch is configured with 4 virtual machine portgroups, as shown in the exhibit. Which portgroup would be utilized by default when creating a new virtual machine?___
A. Access Network
B. DMZ Network
C. VM Network
D. Virtual Machine Network
【单选题】
Which vSphere 6.x feature will allow an organization to utilize native snapshots?___
A. Virtual Volumes
B. Virtual SAN
C. VMFS3
D. VMFS5
【单选题】
An administrator is creating a new vSphere Distributed Switch that will be utilized with a specific vSphere Cluster. The cluster itself contains a mix of ESXi 5.x and 6.x Hosts. Which Distributed Switch version should be created to support this configuration?___
A. Distributed Switch: 6.0.0
B. Distributed Switch: 5.0.0
C. Distributed Switch: 5.1.0
D. Distributed Switch: 5.5.0
【单选题】
Which load balancing policy, previously limited to vSphere Distributed Switches, is now available on vSphere Standard Switches with vSphere 6.x?___
A. Route based on physical NIC workload
B. Route based on IP Hash
C. Route based on the originating virtual port
D. Route based on Source MAC Hash
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
An administrator has just completed performing an interactive installation of ESXi 6.x and is booting the host. How is the network initially configured?___
A. The network is configured by Automatic Private IP Addressing (APIPA).
B. The network is configured based on the settings detected in DNS.
C. The network is configured with the address as specified in the installer.
D. The network is automatically configured by DHCP.
【单选题】
You have just installed an ESXi 6.x Host. As part of your company security regulations, a security banner must be presented on the console of the host. How can this action be accomplished?___
A. Configure the Advanced Settings > Annotations screen of the ESXi host.
B. This is configured from the Direct Console User Interface configuration menu.
C. It is not possible to configure a security banner for the ESXi host.
D. From vCenter Server, this setting is configured globally in the vCenter Server configuration.
【单选题】
An administrator is only able to see the Health Badge when using the vRealize Operations user interface. What is the likely cause of this behavior?___
A. The vRealize Operations Foundation License is in use.
B. The vmware-sps service failed to start.
C. The vRealize Operations Standard License is in use.
D. The vmware-rbd-watchdog service failed to start.
推荐试题
【多选题】
试分析列车高压故障时，空调紧急通风的响应过程。___
A. 当功能选择开关处于“测试1、测试2、自动、22℃、24℃、26℃、28℃”档位时，若控制盘检测到主回路电源故障，控制器断开所有吸合的接触器，机组停止运行；
B. 延时10S，控制盘向紧急通风逆变器发送紧急通风信号，接触器EMFK吸合，送风机由紧急通风逆变器供电工作；
C. 当主回路电源恢复，控制盘取消紧急通风信号，接触器EMFK断开；主电路电源恢复后--延时5s，机组进入正常运行状态；
D. 若主回路电源一直未恢复，则紧急通风逆变器工作90min后，控制盘取消紧急通风信号，接触器EMFK断开，机组处于待机状态，直到电源恢复正常后机组重新运行。
【多选题】
有电无气如何升弓？___
A. 当蓄电池电压104v，主风缸风压<4.5bar时
B. 合=72-S101，激活列车
C. 合主控钥匙，司机台激活；
D. 按压受电弓升弓按钮；
E. 到B车升弓柜，用方孔钥匙打开柜门，取出脚踏泵，将两位三通阀旋钮打至垂直位置；
F. 踩压脚踏泵至气压5.5bar受电弓应升起，电客车所有照明（受电弓未升起时只有紧急照明）为正常照明，高压设备工作，压缩机打风，另一端的受电弓自动升起；
G. 将两位三通阀旋钮打至横向位，锁闭好柜门。
【多选题】
无电有气如何升弓？___
A. 当蓄电池电压<104v, 主风缸风压4.5bar
B. 到B车升弓柜，用方孔钥匙打开柜门
C. 将两位三通阀旋钮打至垂直位置，该端受电弓升起；
D. 司机按压司机室继电器柜中的=31-S104（充电机应急启动）至蓄电池电压104V后，(期间可尝试激活蓄电池)合=72-S101，激活列车；
E. 司机按压受电弓“升弓”按钮，受电弓保持升起；
F. 将两位三通阀旋钮打至横向位，锁闭好柜门。
【多选题】
无电无气如何升弓？___
A. 当控制电压<104v,主风缸风压<4.5bar
B. 到B车升弓柜，用方孔钥匙打开柜门，取出脚踏泵；
C. 将两位三通阀旋钮打至垂直位置
D. 司机操作脚踏泵至气压5.5bar，受电弓应升起；
E. 司机按压A车继电器柜面板上充电机应急启动按钮=31-S104 ，A车辅助逆变器风机启动；
F. 辅助逆变器开始工作并对蓄电池进行快速充电，此时合=72-S101，观察司机室蓄电池电压上升超过104V 且电压稳定；
G. 激活列车及司机室，按升弓按钮=21-S102 ，确认升弓显示灯按钮和HMI 显示屏上受电弓状态正确、网压显示正常，等待空压机打气完毕（主风缸气压升至9bar）；
H. 将两位三通阀旋钮打至横向位，锁闭好柜门。
【多选题】
静调电源柜送电操作顺序。___
A. 静调电源柜电缆接头接到车间电源插座。
B. 合上车辆的列车激活开关。
C. 合上静调电源柜总控电源开关。
D. 打开电子锁使静调电源柜控制回路得电。
E. 按下合闸按钮，送电。
【多选题】
描述静调电源柜断电操作顺序。___
A. 按下静调电源柜分闸按钮。
B. 分断列车激活开关。
C. 断开电子锁使静调电源柜控制回路断电。
D. 断开静调电源柜总控电源开关。
E. 断开静调电源柜电缆接头与车间电源插座连接。
【多选题】
在年检作业中，如何检查高速断路器？___
A. 检查高速断路器无损坏、无污垢；
B. 底座螺栓防松线清晰无错位；
C. 高速断路器灭弧罩安装紧固螺栓防松线清晰无错位；
D. 辅助触点端盖内六角紧固螺栓防松线清晰无错位
E. 高速断路器进、出线排紧固螺栓齐全，防松线清晰无错位。
【多选题】
在年检作业中，如何检查接触器(KM1、KM2)状态？___
A. 拆下灭弧罩，灭弧罩应无机械损坏或金属粉尘，否则更换或清除；
B. 接触器主触头外观良好、动作灵活、安装紧固。
【多选题】
在年检作业中，如何检查牵引电机？___
A. 检查进气口和排气口，进、出风滤网紧固螺栓防松线清晰无错位；滤网无堵塞。
B. 检查牵引电机悬挂及电缆、电源盒状态，电机悬挂件防松线清晰无错位；电机机座无裂纹；电缆、电源盒外观无破损、放电烧痕，三相电缆固定螺栓无松动。
C. 检查温度传感器和速度传感器，速度传感器和温度传感器安装稳固，传感器线缆外观无破损、断裂现象。
D. 吹扫进气滤网和出气滤网，用压缩空气清洁进、出气滤网和联轴节。
E. 重新润滑轴承，用壳牌能得力（Shell RETINAX）LX2抗摩擦轴承润滑脂重新润滑深沟球轴承（约 19 g）、圆柱滚子轴承（约 16 g）。
【多选题】
试分析跳主断的原因？ ___
A. 差分电流大于50A、充电超时、充电接触器（KM2）卡合、短接接触器（KM1）卡合；
B. 元件故障、硬件判断网压过压、硬件判断直流过压、硬件判断直流过流、斩波1过流、斩波2过流、电源故障、板不在位；
C. 软件判断网压过压、软件判断中间电压过压、MCU生命信号中断、主断线圈减载故障。
【多选题】
DCU软件主要由哪些控制功能软件组成？___
A. 变流器逻辑保护及特性控制
B. 速度处理及斩波控制
C. 粘着利用控制
D. 牵引电机控制
【多选题】
哪些条件均满足时 ，闭合充电接触器。___
A. 主断反馈状态为闭合
B. 方向手柄非零位
C. 网压大于1300V
D. 无斩波开通标志
【多选题】
哪些条件均满足时 ，闭合短接接触器。___
A. 充电接触器反馈状态为闭合已达3s
B. 中间电压不低于1300V且大于网压的85%
C. 方向手柄非零位
【多选题】
简述牵引系统技术术语和中文名称 ___
A. VVVF（牵引逆变器）、
B. SIV（辅助电源箱）、
C. TCMS（列车控制与监控系统）、
D. DCU（传动控制单元）、
E. HV（高压电器箱）、
F. L（滤波电抗器）、
G. BR（制动电阻）
【多选题】
电气牵引设备主要包括哪些，数量各是多少？___
A. 能耗记录仪箱（B车，共2个）、
B. 高压电器箱（B、C车，共4个）、
C. 滤波电抗器箱（B、C车，共4个）、
D. 牵引逆变器箱（B、C车，共4个）、
E. 制动电阻（B、C车，共4个）、
F. 牵引电机（B、C车，共16个）、
G. 接地装置（A、B、C车，共20个）、
H. 齿轮传动装置（B、C车，共4个）、司机控制器（A车，共2个）。
【多选题】
简述辅助系统组成及相应功能___
A. 逆变部分：辅助用电设备大都需要三相50 Hz，380 V/220 V交流电源，因而首先要将波动的直流网压逆变为恒压恒频的三相交流电。
B. 变压器隔离部分：为了安全必须将电网上的高压与低压用电设备，尤其是常需人工操作的控制电源的设备，在电气电位上实现隔离。通常采用变压器进行电气隔离，同时也可通过设计不同的匝比以满足电压值的需要。
C. 直流电源（兼作蓄电池充电器）：车辆上各控制电器都由直流电源DC/DC供电。车辆上蓄电池为紧急用电所需，所以DC110 V控制电源同时也是蓄电池的充电器。
【多选题】
简述列车双弓都无法升弓电气方面可能原因。___
A. 受电弓控制空开跳闸；
B. 司机室未占有；
C. 紧制停车按钮拍下未恢复；
D. 升弓按钮故障；
【多选题】
电客车单节车单侧照明不亮的原因？___
A. 单节车单边两个供电电源模块同时损坏
B. 单节车单侧继电器损坏（如MP车左侧照明为52-K201损坏）
【多选题】
电客车TC1车远光灯不亮的原因？ ___
A. 24V电源模块损坏
B. 远光灯继电器51-K101触点不动作
C. 头灯损坏
【多选题】
辅助系统的交流负载有哪些？___
A. 外接AC220V负载插座；
B. 空调压缩机；
C. 冷凝器风机（冷凝器风扇）；
D. 送风机（含空调通风机，蒸发器风扇）；
E. 电加热器；
F. 设备通风机（制动电阻通风）；
G. 空气压缩机
【单选题】
列车激活后，当方向手柄、牵引手柄都位于“0”位时，列车施加___制动 。
A. 停放制动
B. 常用制动
C. 保持制动
D. 紧急制动
【单选题】
列车激活后，当方向手柄向前、牵引手柄向后时，列车施加___制动。
A. 停放制动
B. 常用制动
C. 保持制动
D. 紧急制动
【单选题】
1-2个转向架气制动切除限速___。
A. 75km/h
B. 60km/h
C. 50km/h
D. 35km/h
【单选题】
3-4个转向架气制动切除限速 ___。
A. 75km/h
B. 60km/h
C. 50km/h
D. 35km/h
【单选题】
5-6个转向架气制动切除限速___。
A. 75km/h
B. 60km/h
C. 50km/h
D. 35km/h
【单选题】
7个及以上转向架气制动切除限速牵引。___。
A. 75km/h
B. 60km/h
C. 50km/h
D. 限制牵引
【单选题】
正线实际运营切除远端B05时间为___。
A. 180秒
B. 210秒
C. 240秒
D. 270秒
【单选题】
故障车门不能切除，列车区间限速（ ）,站台限速___。
A. 40km/h、5km/h
B. 40km/h、10km/h
C. 35km/h、10km/h
D. 35km/h、5km/h
【单选题】
司机室侧门无法关闭，报告OCC请求增派保安或副司机协助扶住故障门，限速___维持运行到终点站退出服务。
A. 50km/h
B. 45km/h
C. 55km/h
D. 60km/h
【单选题】
列车激活后，当方向手柄向后时，非激活端标志灯为___。
【单选题】
一节车___动态地图无显示或混乱可未经修复上线运营。
【单选题】
同一节车___个空调机组通风功能故障，严重故障禁止上线运营。
【单选题】
___及以上BCU中级故障、严重故障禁止上线运营。
【单选题】
___及以上空压机中级故障、严重故障禁止上线运营。
【单选题】
运营中出现单个受电弓降下，重新升弓后故障消除，正确的应对方案___。
A. 当前站退出服务
B. 前方站退出服务
C. 终点站退出服务
D. 继续运营
【单选题】
一个牵引1个动车牵引切除限速___。
A. 75km/h
B. 60km/h
C. 45km/h
D. 30km/h
【单选题】
2个动车牵引切除限速___。
A. 75km/h
B. 60km/h
C. 45km/h
D. 30km/h
【单选题】
3个动车牵引切除限速___。
A. 75km/h
B. 60km/h
C. 45km/h
D. 30km/h
【单选题】
列车断电后重新激活间隔时间为___。
A. 10s
B. 12s
C. 15s
D. 30s
