【判断题】
用经纬仪和平行光管测量机床转台分度误差时，应用专用心轴配装在转台中心孔中将经纬仪和心轴紧固联接在一起
查看试卷，进入试卷练习
微信扫一扫，开始刷题
相关试题
【判断题】
采用双螺母螺纹式调整滚珠丝杠轴向间隙的方法结构紧凑，调整方便，应用广泛
【判断题】
若自准直仪上读数鼓轮每格角值分度值为1"，则其线值分度值可用0.05mm/m表示
【判断题】
所有的紫色酒精，在 1 米内不准点有明火，不准放在暖气片上
【判断题】
固定式装配适用于单件和小批量模具的装配，以及装配精度要求较高，需要调整的部位较多的装配
【判断题】
我国对企业发生的事故，坚持“四不放过”原则进行处理
【判断题】
在机械设备中，凸轮表面误差将会引起扭转振动
【单选题】
What happens to the status of users already logged into ESXi Shell when a vSphere administrator enables lockdown mode?___
A. Users remain logged in and can run commands, except to disable lockdown mode.
B. Users remain logged in and can run commands, including disabling lockdown mode.
C. Users are immediately logged out of ESXi Shell.
D. Users are logged out after a timeout specified by the vSphere administrator.
【单选题】
What is the effective vSphere licensing level during the 60 day evaluation period?___
A. vSphere Foundation Essentials Plus
B. vSphere Standard
C. vSphere Enterprise
D. vSphere
E. nterprise Plus
【单选题】
To comply with security requirements, an administrator with a vCenter Server Appliance needs to force logoff of the vSphere web client after 10 minutes of inactivity.What should the administrator do to meet the requirement?___
A. Edit: /var/lib/vmware/vsphere-client/webclient.properties, modify session.timeout=10
B. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=600
C. Edit: /var/lib/vmware/vsphere-client/webclient.properties modify session.timeout=600
D. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=10
【单选题】
An administrator enables High Availability (HA) on a Virtual SAN cluster.Which network is used for HA Network Heatbeat configuration?___
A. The Management network.
B. The vMotion network.
C. The Virtual SAN network.
D. The Provisioning Traffic network.
【单选题】
A user wants to monitor a business-critical virtual machine to ensure that it doesn't run out of resources. What metric could be monitored in vRealize Operations to address this concern?___
A. Time Remaining badge
B. Compliance badge
C. Reclaimable Waste badge
D. Density badge
【单选题】
An administrator has recently installed a new ESXi 6.x Host, and during the configuration notices sporadic network problems. To check whether the issue occurred sometime during the configuration, the administrator would like to reset the system.How can this be accomplished in the shortest amount of time?___
A. Run the ESXi installer again and reinstall the host.
B. Select the Reset System Configuration option from the vSphere Client when connected directly to the host.
C. From the
D. irect Console User Interface, select Reset System Configuration.
【单选题】
A vApp is running out of compute resources when overall activity is high within the resource pool. At other times, everything is fine.What should be done to resolve this issue?___
A. Increase the size of the resource pool Shares.
B. Set the vApp's CPU and Memory Reservation Type to Expandable.
C. Set the vApp's CPU and Memory Limit to Unlimited.
D. Create a new resource pool with the existing hardware configuration.
【单选题】
A virtual machine has been renamed and an administrator is unable to find files with the new virtual machine name in the datastore.What is the reason for this?___
A. The names of the files on the datastore do not change.
B. The names of the files on the datastore have been corrupted.
C. The virtual machine needs to be re-added to the inventory.
D. The Distributed Resource Scheduler moved the virtual machine to another host.
【单选题】
An administrator has configured network connectivity for a new virtual machine, as shown in the Exhibit.What will occur with the network traffic of this virtual machine when communicating externally from vSwitch1?___
A. The virtual machine will communicate on both uplinks
B. The virtual machine will only communicate on vmnic1
C. The virtual machine will only communicate on vmnic2
D. The virtual machine will fail to communicate externally
【单选题】
An administrator is unable to create the first group in a new vRealize Operations environment. What is the likely cause of the problem?___
A. There are no group types defined.
B. The group is not defined in SSO.
C. There are more than 32 group types defined.
D. The description for the group is not provided.
【单选题】
A new vApp was built and tested in the corporate headquarters datacenter running vSphere 6.x. What condition would explain why the virtual machine is failing to boot in an offsite datacenter running on vSphere 5.5?___
A. The virtual machine was built with the default hardware version.
B. The VMFS 5 datastore is not compatible with virtual machines configured with vSphere 6.x.
C. a
D. RS 5.5 cluster cannot run virtual machines configured with vSphere 6.x.
【单选题】
An administrator is evaluating whether to deploy vCenter Server on a Windows server or on a vCenter Server appliance. The administrator has the following requirements: <A web browser will be utilized to manage the vSphere environment.> <16 ESXi hosts will be deployed.> <Licenses must be shared with a vCenter Server at another site.> <An external Oracle 10g database server will be used to host the vCenter Server database.> Why will the administrator need to deploy vCenter Server on a Windows server?___
A. Linked Mode is a requirement for the solution.
B. Oracle 10g is a requirement for the solution.
C. The vSphere web client is a requirement for the solution.
D. Management of more than 5 hosts is a requirement for the solution.
【单选题】
What is a benefit of using VMware Data Protection ?___
A. Provides support for guest-level backups and restores of Microsoft SQL Servers, Exchange Servers, and Share Point Servers.
B. Provides support for advanced storage services including replication, encryption, deduplication, and compression.
C. Provides direct access to VDP configuration integrated into the vSphere Client.
D. Reduces disk space consumed by virtual machine data using deduplication.
【单选题】
An administrator enables vSphere High Availability (HA) on an existing cluster with a large number of hosts and virtual machines. The administrator notices that the setup of vSphere HA on some of the hosts is failing. What step, if taken, might resolve this issue?___
A. Increase the value of the config.vpxd.das.electionWaitTimeSec setting.
B. Set the value of vpxd.das.aamMemoryLimit to 256.
C. Set the value of the das.useDefaultIsolationAddress setting to False.
D. Increase the value of the das.iostatsinterval setting.
【单选题】
An ESXi 6.x host consists of 24 logical cores. Hyperthreading is enabled on the host. What is the maximum number of vCPUs that can be assigned to a virtual machine on this host?___
【单选题】
By default, each ESXi 6.x host is provisioned with a certificate from which root certificate authority?___
A. RedHat Certificate Authority
B. VMware Certificate Authority
C. DigiCert Certificate Authority
D. Verisign Certificate Authority
【单选题】
An administrator is adding an NFS datastore as shown in the Exhibit. What is the purpose of the Servers to be added list?___
A. It contains the IP addresses of the NFS Storage Server to provide multipathing capability.
B. It contains the IP addresses of the ESXi hosts that mount the datastore.
C. It contains the IP addresses used for
D. ynamic Discovery of targets.
【单选题】
An administrator reports that the System Event log data is only available for 24 hours when reviewing the Hardware Status tab. Which condition could be responsible for the loss of data?___
A. A Reset event log was executed.
B. The statistical collection level was set to a value of 1.
C. The boot disk of the host is corrupt.
D. Syslog has been configured at the vCenter Server level.
【单选题】
During an upgrade, the ESXi 6.x installer finds an existing version of ESXi and a VMFS3 volume. No virtual machines exist on the host or VMFS3 volume. The requirement is to upgrade to VMFS5. Which option should be chosen to meet this requirement?___
A. Upgrade ESXi and preserve the VMFS datastore
B. Install ESXi and preserve the VMFS datastore
C. Install ESXi and overwrite the VMFS datastore
D. Upgrade
E. SXi and overwrite the VMFS datastore
【单选题】
A vSphere 6.x Standard Switch is configured with 4 virtual machine portgroups, as shown in the exhibit. Which portgroup would be utilized by default when creating a new virtual machine?___
A. Access Network
B. DMZ Network
C. VM Network
D. Virtual Machine Network
【单选题】
Which vSphere 6.x feature will allow an organization to utilize native snapshots?___
A. Virtual Volumes
B. Virtual SAN
C. VMFS3
D. VMFS5
【单选题】
An administrator is creating a new vSphere Distributed Switch that will be utilized with a specific vSphere Cluster. The cluster itself contains a mix of ESXi 5.x and 6.x Hosts. Which Distributed Switch version should be created to support this configuration?___
A. Distributed Switch: 6.0.0
B. Distributed Switch: 5.0.0
C. Distributed Switch: 5.1.0
D. Distributed Switch: 5.5.0
【单选题】
Which load balancing policy, previously limited to vSphere Distributed Switches, is now available on vSphere Standard Switches with vSphere 6.x?___
A. Route based on physical NIC workload
B. Route based on IP Hash
C. Route based on the originating virtual port
D. Route based on Source MAC Hash
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
An administrator has just completed performing an interactive installation of ESXi 6.x and is booting the host. How is the network initially configured?___
A. The network is configured by Automatic Private IP Addressing (APIPA).
B. The network is configured based on the settings detected in DNS.
C. The network is configured with the address as specified in the installer.
D. The network is automatically configured by DHCP.
【单选题】
You have just installed an ESXi 6.x Host. As part of your company security regulations, a security banner must be presented on the console of the host. How can this action be accomplished?___
A. Configure the Advanced Settings > Annotations screen of the ESXi host.
B. This is configured from the Direct Console User Interface configuration menu.
C. It is not possible to configure a security banner for the ESXi host.
D. From vCenter Server, this setting is configured globally in the vCenter Server configuration.
【单选题】
An administrator is only able to see the Health Badge when using the vRealize Operations user interface. What is the likely cause of this behavior?___
A. The vRealize Operations Foundation License is in use.
B. The vmware-sps service failed to start.
C. The vRealize Operations Standard License is in use.
D. The vmware-rbd-watchdog service failed to start.
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets either of these conditions: <High virtual CPU> <High active memory consumption.> <The alarm is only triggering when both of the conditions are met.> What can be done to correct the alarm behavior?___
A. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory and link them together with ESXCLI.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is attempting to restore a number of files in a directory within the Operating System of a virtual machine. How can the administrator restore the files from a previous backup? ___
A. Use the File Level Restore option from the selected backup of the virtual machine in the vSphere Web Client.
B. Connect to the File Level Restore tool from a web browser in the virtual machine.
C. Connect to the File Level Restore tool from the VMware
D. ata Protection appliance.
【单选题】
After selecting an object in vRealize Operations, how can a user compare the badge values of related child objects? ___
A. Use the Scoreboard tab
B. Use the Relationship tab
C. Use the Members tab
D. Use the Overview tab
【单选题】
You want to deploy a vApp and dynamically assign IP addresses without a DHCP server on the network. Which action would you take to accomplish this task? ___
A. Enable IP pools.
B. Configure a local DHCP server in the vApp.
C. Enable NAT on the vApp router.
D. Configure the guest OS for workgroup and WINS.
推荐试题
【单选题】
反推门的作动筒液压来自何处？___
A. HCU；
B. HMU；
C. ECU。
D.
【单选题】
反推由ECU控制，ECU的信号来自于何处？___
A. 发动机油门上的两个反推手柄；
B. EIU；
C. FMGC。
D.
【单选题】
风扇包皮上有：___
A. 起动valve勤务口盖；
B. 起动valve勤务口盖和滑油箱勤务口盖；
C. 滑油箱勤务口盖。
D.
【单选题】
风扇电气连接面板在：___
A. 风扇包皮左侧上部；
B. 风扇包皮右侧上部；
C. 在吊架上的前后安装点间。
D.
【单选题】
风扇和核心机由什么冷却？___
A. 冲压空气；
B. 风扇引气；
C. 冲压空气冷却风扇，风扇引气冷却核心机。
D.
【单选题】
高压燃油关断valve关闭指令怎样传送？___
A. 直接从主电门来；
B. 主电门经过ECU；
C. 主电门经过ECU和EIU。
D.
【单选题】
高压涡轮支撑结构衬环的温度由哪一个计算机监控？___
A. EIU；
B. ECU；
C. FMGC。
D.
【单选题】
何时出现滑油温度高警告？___
A. 140度到155度之间超过15分钟；
B. 155度以上；
C. A+B。
D.
【单选题】
何时出现推力手柄故障警告？___
A. 当一个推力手柄上两个传感器失效时；
B. 当一个推力手柄上一个传感器失效时；
C. 当两个推力手柄上各有一个传感器失效时。
D.
【单选题】
何时可操纵反推系统?___
A. 地面；
B. 地面和空中；
C. 空中。
D.
【单选题】
滑油系统封严利用空气压力，增压空气来自何处？___
A. 4级高压压气机引气；
B. 9级高压压气机引气；
C. 风扇排气。
D.
【单选题】
滑油系统为？___
A. 干槽式；
B. 湿槽式；
C. 都不是。
D.
【单选题】
滑油系统中防虹吸所使用的空气来自于何处？___
A. 前油槽；
B. 后油槽；
C. 发动机引气。
D.
【单选题】
滑油箱勤务口盖在何处？___
A. 右侧风扇包皮；
B. 左侧风扇包皮；
C. 左侧反推包皮。
D.
【单选题】
进气道安装有：___
A. 防冰系统；
B. 内话地面插孔及T12探头；
C. A+B。
D.
【单选题】
哪个部件给可调静子叶片动作筒提供压力?___
A. 液压机械组件；
B. 发动机液压泵；
C. 飞机液压源。
D.
【单选题】
哪个系统和EVMU接口？___
A. ECAM-FADEC；
B. ECAM-CFDS；
C. ECAM-ACARS。
D.
【单选题】
哪几个轴承支撑高压转子？___
A. 3#(双轴承)和4#；
B. 2#、4#；
C. 2#、3#(双轴承)。
D.
【单选题】
起动过程中，如果终止起动，ECU将通过什么关闭高压燃油关断valve？___
A. 主电门；
B. EIU；
C. 燃油计量valve。
D.
【单选题】
起动valve是：___
A. 电控气动；
B. 电控电动；
C. 以上都不是。
D.
【单选题】
起动机的操作是：___
A. 电动；
B. 气动；
C. 液压操作。
D.
【单选题】
气动站位495指何处？___
A. 高压压气机出口；
B. 低压涡轮出口；
C. 排气温度测量面。
D.
【单选题】
燃烧级分配valve(BSV)的位置反馈信号送给：___
A. ECU；
B. EIU；
C. ECAM。
D.
【单选题】
燃烧级分配valve（BSV）的位置反馈信号送给何处？___
A. ECU；
B. ECAM；
C. EIU。
D.
【单选题】
燃烧级分配valve（BSV）由何操纵？___
A. 电动马达；
B. ECU的电信号；
C. HMU来的伺服燃油。
D.
【单选题】
燃烧级分配valve位于何处？___
A. 风扇机匣左侧；
B. 风扇机匣右侧；
C. 高压压气机下部。
D.
【单选题】
燃油回油valve的位置电门提供什么信息到ECU?___
A. V1、V2电磁valve位置信号；
B. 燃油回油valve的关断valve位置信号；
C. 燃油回油超压信号。
D.
【单选题】
燃油回油valve由何进行控制操纵？___
A. 由ECU进行电控制，电动马达操纵；
B. 由ECU进行电控制，燃油操纵；
C. 由EIU进行电控制，电动马达操纵。
D.
【单选题】
燃油滤压差为何值时，触发燃油滤堵塞警告？___
A. 11psi；
B. 115psi；
C. 125psi。
D.
【单选题】
人工起动时，飞机状况如何？___
A. APU运转且APU引气接通；
B. 1#、2#FADEC通电；
C. A+B。
D.
【单选题】
如果探测到反推门不正常打开，哪一部计算机会作动自动收藏功能关闭并锁好反推门？___
A. EIU；
B. ECU；
C. FMGC。
D.
【单选题】
实施假起动时，主电门在"ON"位发动机运转不能超过多少秒？___
A. 20秒；
B. 15秒；
C. 10秒。
D.
【单选题】
提供反推系统作动的两个电磁valve由何控制?___
A. 发动机控制组件；
B. 液压控制组件；
C. 推力控制组件。
D.
【单选题】
下面哪种故障需要地面机械员和机组相配合?___
A. 起动valve失效开；
B. 起动valve失效关；
C. A、B都不是。
D.
【单选题】
液压断开面板位于什么位置?___
A. 风扇包皮左侧上部；
B. 风扇包皮右侧上部；
C. 在吊架上的前后安装点之间。
D.
【单选题】
液压控制组件如何控制?___
A. 直接由反推杆控制；
B. 反推杆通过ECU控制；
C. 反推杆通过EIU控制。
D.
【单选题】
用于人工操作起动valve接近盖板在什么位置?___
A. 右侧风扇包皮；
B. 左侧风扇包皮；
C. 左侧反推包皮。
D.
【单选题】
再循环系统中，燃油回油valve的功用是什么?___
A. 在发动机停车时给燃油系统释压；
B. 使燃油更好地过滤；
C. 保持IDG、发动机燃油的温度不超过限制值。
D.
【单选题】
在HMU内，伺服valve由何驱动？___
A. ECU控制的电动马达驱动；
B. ECU控制的扭矩马达液压驱动；
C. 以上都不是。
D.
