刷题
导入试题
【判断题】
在修理带传动机构时,发现带轮孔超差额0.08mm,造成配合过松,一般可用镀铬法来加大轴颈尺寸
A. 对
B. 错
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
A
解析
暂无解析
相关试题
【判断题】
用经纬仪和平行光管测量机床转台分度误差时,应用专用心轴配装在转台中心孔中将经纬仪和心轴紧固联接在一起
A. 对
B. 错
【判断题】
采用双螺母螺纹式调整滚珠丝杠轴向间隙的方法结构紧凑,调整方便,应用广泛
A. 对
B. 错
【判断题】
若自准直仪上读数鼓轮每格角值分度值为1",则其线值分度值可用0.05mm/m表示
A. 对
B. 错
【判断题】
所有的紫色酒精,在 1 米内不准点有明火,不准放在暖气片上
A. 对
B. 错
【判断题】
固定式装配适用于单件和小批量模具的装配,以及装配精度要求较高,需要调整的部位较多的装配
A. 对
B. 错
【判断题】
我国对企业发生的事故,坚持“四不放过”原则进行处理
A. 对
B. 错
【判断题】
齿轮的齿侧间隙分为12 个等级
A. 对
B. 错
【判断题】
在机械设备中,凸轮表面误差将会引起扭转振动
A. 对
B. 错
【单选题】
What happens to the status of users already logged into ESXi Shell when a vSphere administrator enables lockdown mode?___
A. Users remain logged in and can run commands, except to disable lockdown mode.
B. Users remain logged in and can run commands, including disabling lockdown mode.
C. Users are immediately logged out of ESXi Shell.
D. Users are logged out after a timeout specified by the vSphere administrator.
【单选题】
What is the effective vSphere licensing level during the 60 day evaluation period?___
A. vSphere Foundation Essentials Plus
B. vSphere Standard
C. vSphere Enterprise
D. vSphere
E. nterprise Plus
【单选题】
To comply with security requirements, an administrator with a vCenter Server Appliance needs to force logoff of the vSphere web client after 10 minutes of inactivity.What should the administrator do to meet the requirement?___
A. Edit: /var/lib/vmware/vsphere-client/webclient.properties, modify session.timeout=10
B. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=600
C. Edit: /var/lib/vmware/vsphere-client/webclient.properties modify session.timeout=600
D. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=10
【单选题】
An administrator enables High Availability (HA) on a Virtual SAN cluster.Which network is used for HA Network Heatbeat configuration?___
A. The Management network.
B. The vMotion network.
C. The Virtual SAN network.
D. The Provisioning Traffic network.
【单选题】
A user wants to monitor a business-critical virtual machine to ensure that it doesn't run out of resources. What metric could be monitored in vRealize Operations to address this concern?___
A. Time Remaining badge
B. Compliance badge
C. Reclaimable Waste badge
D. Density badge
【单选题】
An administrator has recently installed a new ESXi 6.x Host, and during the configuration notices sporadic network problems. To check whether the issue occurred sometime during the configuration, the administrator would like to reset the system.How can this be accomplished in the shortest amount of time?___
A. Run the ESXi installer again and reinstall the host.
B. Select the Reset System Configuration option from the vSphere Client when connected directly to the host.
C. From the
D. irect Console User Interface, select Reset System Configuration.
【单选题】
A vApp is running out of compute resources when overall activity is high within the resource pool. At other times, everything is fine.What should be done to resolve this issue?___
A. Increase the size of the resource pool Shares.
B. Set the vApp's CPU and Memory Reservation Type to Expandable.
C. Set the vApp's CPU and Memory Limit to Unlimited.
D. Create a new resource pool with the existing hardware configuration.
【单选题】
A virtual machine has been renamed and an administrator is unable to find files with the new virtual machine name in the datastore.What is the reason for this?___
A. The names of the files on the datastore do not change.
B. The names of the files on the datastore have been corrupted.
C. The virtual machine needs to be re-added to the inventory.
D. The Distributed Resource Scheduler moved the virtual machine to another host.
【单选题】
An administrator has configured network connectivity for a new virtual machine, as shown in the Exhibit.What will occur with the network traffic of this virtual machine when communicating externally from vSwitch1?___
A. The virtual machine will communicate on both uplinks
B. The virtual machine will only communicate on vmnic1
C. The virtual machine will only communicate on vmnic2
D. The virtual machine will fail to communicate externally
【单选题】
An administrator is unable to create the first group in a new vRealize Operations environment. What is the likely cause of the problem?___
A. There are no group types defined.
B. The group is not defined in SSO.
C. There are more than 32 group types defined.
D. The description for the group is not provided.
【单选题】
A new vApp was built and tested in the corporate headquarters datacenter running vSphere 6.x. What condition would explain why the virtual machine is failing to boot in an offsite datacenter running on vSphere 5.5?___
A. The virtual machine was built with the default hardware version.
B. The VMFS 5 datastore is not compatible with virtual machines configured with vSphere 6.x.
C. a
D. RS 5.5 cluster cannot run virtual machines configured with vSphere 6.x.
【单选题】
An administrator is evaluating whether to deploy vCenter Server on a Windows server or on a vCenter Server appliance. The administrator has the following requirements: <A web browser will be utilized to manage the vSphere environment.> <16 ESXi hosts will be deployed.> <Licenses must be shared with a vCenter Server at another site.> <An external Oracle 10g database server will be used to host the vCenter Server database.> Why will the administrator need to deploy vCenter Server on a Windows server?___
A. Linked Mode is a requirement for the solution.
B. Oracle 10g is a requirement for the solution.
C. The vSphere web client is a requirement for the solution.
D. Management of more than 5 hosts is a requirement for the solution.
【单选题】
What is a benefit of using VMware Data Protection ?___
A. Provides support for guest-level backups and restores of Microsoft SQL Servers, Exchange Servers, and Share Point Servers.
B. Provides support for advanced storage services including replication, encryption, deduplication, and compression.
C. Provides direct access to VDP configuration integrated into the vSphere Client.
D. Reduces disk space consumed by virtual machine data using deduplication.
【单选题】
An administrator enables vSphere High Availability (HA) on an existing cluster with a large number of hosts and virtual machines. The administrator notices that the setup of vSphere HA on some of the hosts is failing. What step, if taken, might resolve this issue?___
A. Increase the value of the config.vpxd.das.electionWaitTimeSec setting.
B. Set the value of vpxd.das.aamMemoryLimit to 256.
C. Set the value of the das.useDefaultIsolationAddress setting to False.
D. Increase the value of the das.iostatsinterval setting.
【单选题】
An ESXi 6.x host consists of 24 logical cores. Hyperthreading is enabled on the host. What is the maximum number of vCPUs that can be assigned to a virtual machine on this host?___
A. 24
B. 48
C. 64
D. 128
【单选题】
By default, each ESXi 6.x host is provisioned with a certificate from which root certificate authority?___
A. RedHat Certificate Authority
B. VMware Certificate Authority
C. DigiCert Certificate Authority
D. Verisign Certificate Authority
【单选题】
An administrator is adding an NFS datastore as shown in the Exhibit. What is the purpose of the Servers to be added list?___
A. It contains the IP addresses of the NFS Storage Server to provide multipathing capability.
B. It contains the IP addresses of the ESXi hosts that mount the datastore.
C. It contains the IP addresses used for
D. ynamic Discovery of targets.
【单选题】
An administrator reports that the System Event log data is only available for 24 hours when reviewing the Hardware Status tab. Which condition could be responsible for the loss of data?___
A. A Reset event log was executed.
B. The statistical collection level was set to a value of 1.
C. The boot disk of the host is corrupt.
D. Syslog has been configured at the vCenter Server level.
【单选题】
During an upgrade, the ESXi 6.x installer finds an existing version of ESXi and a VMFS3 volume. No virtual machines exist on the host or VMFS3 volume. The requirement is to upgrade to VMFS5. Which option should be chosen to meet this requirement?___
A. Upgrade ESXi and preserve the VMFS datastore
B. Install ESXi and preserve the VMFS datastore
C. Install ESXi and overwrite the VMFS datastore
D. Upgrade
E. SXi and overwrite the VMFS datastore
【单选题】
A vSphere 6.x Standard Switch is configured with 4 virtual machine portgroups, as shown in the exhibit. Which portgroup would be utilized by default when creating a new virtual machine?___
A. Access Network
B. DMZ Network
C. VM Network
D. Virtual Machine Network
【单选题】
Which vSphere 6.x feature will allow an organization to utilize native snapshots?___
A. Virtual Volumes
B. Virtual SAN
C. VMFS3
D. VMFS5
【单选题】
An administrator is creating a new vSphere Distributed Switch that will be utilized with a specific vSphere Cluster. The cluster itself contains a mix of ESXi 5.x and 6.x Hosts. Which Distributed Switch version should be created to support this configuration?___
A. Distributed Switch: 6.0.0
B. Distributed Switch: 5.0.0
C. Distributed Switch: 5.1.0
D. Distributed Switch: 5.5.0
【单选题】
Which load balancing policy, previously limited to vSphere Distributed Switches, is now available on vSphere Standard Switches with vSphere 6.x?___
A. Route based on physical NIC workload
B. Route based on IP Hash
C. Route based on the originating virtual port
D. Route based on Source MAC Hash
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
An administrator has just completed performing an interactive installation of ESXi 6.x and is booting the host. How is the network initially configured?___
A. The network is configured by Automatic Private IP Addressing (APIPA).
B. The network is configured based on the settings detected in DNS.
C. The network is configured with the address as specified in the installer.
D. The network is automatically configured by DHCP.
【单选题】
You have just installed an ESXi 6.x Host. As part of your company security regulations, a security banner must be presented on the console of the host. How can this action be accomplished?___
A. Configure the Advanced Settings > Annotations screen of the ESXi host.
B. This is configured from the Direct Console User Interface configuration menu.
C. It is not possible to configure a security banner for the ESXi host.
D. From vCenter Server, this setting is configured globally in the vCenter Server configuration.
【单选题】
An administrator is only able to see the Health Badge when using the vRealize Operations user interface. What is the likely cause of this behavior?___
A. The vRealize Operations Foundation License is in use.
B. The vmware-sps service failed to start.
C. The vRealize Operations Standard License is in use.
D. The vmware-rbd-watchdog service failed to start.
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets either of these conditions: <High virtual CPU> <High active memory consumption.> <The alarm is only triggering when both of the conditions are met.> What can be done to correct the alarm behavior?___
A. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory and link them together with ESXCLI.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is attempting to restore a number of files in a directory within the Operating System of a virtual machine. How can the administrator restore the files from a previous backup? ___
A. Use the File Level Restore option from the selected backup of the virtual machine in the vSphere Web Client.
B. Connect to the File Level Restore tool from a web browser in the virtual machine.
C. Connect to the File Level Restore tool from the VMware
D. ata Protection appliance.
【单选题】
After selecting an object in vRealize Operations, how can a user compare the badge values of related child objects? ___
A. Use the Scoreboard tab
B. Use the Relationship tab
C. Use the Members tab
D. Use the Overview tab
推荐试题
【单选题】
LKJ-2000型监控记录装置当装置发生防溜报警时一次按压___键。《LKJ2000型列车运行监控记录装置》P267
A. 解锁
B. 警惕
C. 缓解
【单选题】
LKJ-2000型监控记录装置,运行中当过机误差___300m时,装置可以自动校正。《LKJ2000型列车运行监控记录装置》P260
A. 小于
B. 等于
C. 大于
【单选题】
LKJ-2000型监控记录装置查询当前揭示信息,显示机车前方___米以内的揭示。《LKJ2000型列车运行监控记录装置》P262
A. 1000
B. 2000
C. 3000
【单选题】
LKJ-2000型监控记录装置设定参数查询时在查询显示状态,将光标移到“设定参数”按压【确认】键或数字键___。《LKJ2000型列车运行监控记录装置》P264
A. 4
B. 5
C. 6
【单选题】
LKJ-2000型监控记录装置如果错误选择了某条揭示,可将光标移到该揭示项再次按压___键取消对该揭示的选择。《LKJ2000型列车运行监控记录装置》P266。
A. 查询
B. 确认
C. 解锁
【单选题】
LKJ-2000型监控记录装置A.B机同时故障时,报警时间达到___监控装置实施紧急制动。《LKJ2000型列车运行监控记录装置》P268
A. 1min
B. 2min
C. 3min
【单选题】
LKJ-2000型监控记录装置施行紧急制动时,不允许司机___。《LKJ2000乘务员手册》P19
A. 解锁
B. 缓解
C. 移动手柄
【单选题】
LKJ-2000型监控记录装置当列车运行速度___允许值时,装置切除机车牵引电流。《LKJ2000乘务员手册》P19
A. 等于
B. 接近
C. 超过
【单选题】
铁路线路直线轨距标准为___ mm。J42
A. 1000
B. 1435
C. 1502
【单选题】
用于侧向接发停车旅客列车的单开道岔,不得小于___号。J46
A. 8
B. 9
C. 12
【单选题】
侧向接发停车货物列车并位于正线的单开道岔,在中间站不得小于___号,在其他车站不得小于9号。J46
A. 8
B. 9
C. 12
【单选题】
高柱出站、高柱进路信号机的显示距离,不得小于___。J69
A. 400 m
B. 800 m
C. 1000 m
【单选题】
不办理通过列车的到发线上的出站、发车进路信号机应采用___。J70
A. 矮型信号机
B. 高柱信号机
C. 通用信号机
【单选题】
进站信号机应设在距进站最外方道岔尖轨尖端(顺向为警冲标)不小于___的地点。J72
A. 50 m
B. 200 m
C. 400 m
【单选题】
出站信号机应设在每一发车线的警冲标___(对向道岔为尖轨尖端外方)适当地点。J73
A. 对称
B. 内方
C. 外方
【单选题】
___信号机应设在闭塞分区或所间区间的分界处。J74
A. 进站
B. 出站
C. 通过
【单选题】
列车运行速度超过120 km/h的半自动闭塞或自动站间闭塞区段,设置两段接近区段,在第一接近区段和第二接近区段的分界处,设___。J76
A. 预告信号机
B. 接近信号机
C. 复示信号机
【单选题】
双线自动闭塞区段,有反方向运行条件时,出站信号机设___。J78
A. 发车表示器
B. 进路表示器
C. 发车线路表示器
【单选题】
驼峰色灯辅助信号机,可兼作出站或___并根据需要装设进路表示器。J84
A. 进站
B. 发车进路
C. 通过
【单选题】
集中联锁以外的脱轨器及引向安全线或避难线的道岔,设___。J86
A. 脱轨表示器
B. 进路表示器
C. 道岔表示器
【单选题】
在列车运行速度超过120 km/h的双线区段,采用速差式自动闭塞,列车紧急制动距离由___及以上闭塞分区长度保证。J94
A. 一个
B. 两个
C. 三个
【单选题】
机车轮对踏面擦伤深度不得超过___mm。J170
A. 0.5
B. 0.7
C. 1
【单选题】
车轮踏面上的缺陷或剥离长度不超过40 mm,深度不超过___mm。J170
A. 0.5
B. 0.7
C. 1
【单选题】
接触网标称电压值为___kV,最高工作电压为27.5 kV,短时(5 min)最高工作电压为29 kV,最低工作电压为19 kV。J197
A. 20
B. 23
C. 25
【单选题】
为保证人身安全,除专业人员执行有关规定外,其他人员(包括所携带的物件)与牵引供电设备带电部分的距离,不得小于___ mm。 J205
A. 1500
B. 1800
C. 2000
【单选题】
在设有接触网的线路上,___攀登车顶及在车辆装载的货物之上作业;如确需作业时,须在指定的线路上,将接触网停电接地并采取安全防护措施后,方准进行。J205
A. 确认安全距离后可以
B. 严禁
C. 可以在有人监护下
【单选题】
在调度集中区段,调度集中控制车站有关行车工作由该区段___指挥。J227
A. 车站值班员
B. 列车调度员
C. 车站值班员和列车调度员共同
【单选题】
指挥列车运行的命令(运行揭示调度命令除外)和口头指示,只能由___发布。J231
A. 车站值班员
B. 机车调度员
C. 列车调度员
【单选题】
双管供风的旅客列车运行途中改为单管供风时,列车调度员___。J231
A. 须发给司机调度命令
B. 给予司机口头指示
C. 通知车辆乘务员即可
【单选题】
驾驶机车的人员,必须持有___颁发的驾驶证。J243
A. 铁路局
B. 铁路总公司
C. 国家铁路局
【单选题】
编组超重列车时,在中间站应得到___的同意,并均须经列车调度员准许。J247
A. 司机
B. 车站值班员
C. 车站调度员
【单选题】
旅客列车列尾装置尾部主机的安装与摘解、风管及电源的连结与摘解,由___人员负责。J254
A. 车辆部门
B. 车务部门
C. 机务部门
【单选题】
货物列车列尾装置尾部主机的安装与摘解,由___人员负责。J254
A. 车辆部门
B. 车务部门
C. 机务部门
【单选题】
补机原则上应挂于本务机车的___,在特殊区段或需途中返回时,经铁路局批准,可挂于列车后部。J256
A. 前位
B. 次位
C. 前位或次位
【单选题】
单机挂车的辆数,线路坡度不超过12‰的区段,以___辆为限;超过12‰的区段,由铁路局规定。J258
A. 5
B. 10
C. 15
【单选题】
单机挂车在区间被迫停车后的防护工作由___负责,开车前应确认附挂辆数和制动主管贯通状态是否良好。J258
A. 机车乘务组
B. 车辆乘务员
C. 车站人员
【单选题】
机车、车辆长度的计算,以前后两钩舌内侧面距离按___m为换算单位(一辆)。J259
A. 10
B. 11
C. 15
【单选题】
特快及快速货物班列自动制动机主管压力为___kPa。
A. 500
B. 550
C. 600
【单选题】
遇机车换挂需将自动制动机列车主管压力由600 kPa改为500 kPa时,摘机前应对列车主管实施一次___kPa的最大减压量操纵。J261
A. 100
B. 140
C. 170
【单选题】
编入货物列车的关门车数超过现车总辆数的___时,按规定计算闸瓦压力,并填发制动效能证明书交与司机。J262
A. 6%
B. 10%
C. 12%
欢迎使用我爱刷题
×
微信搜索我爱刷题小程序
温馨提示
×
请在电脑上登陆“www.woaishuati.com”使用