【判断题】
采用双螺母螺纹式调整滚珠丝杠轴向间隙的方法结构紧凑，调整方便，应用广泛
查看试卷，进入试卷练习
微信扫一扫，开始刷题
相关试题
【判断题】
若自准直仪上读数鼓轮每格角值分度值为1"，则其线值分度值可用0.05mm/m表示
【判断题】
所有的紫色酒精，在 1 米内不准点有明火，不准放在暖气片上
【判断题】
固定式装配适用于单件和小批量模具的装配，以及装配精度要求较高，需要调整的部位较多的装配
【判断题】
我国对企业发生的事故，坚持“四不放过”原则进行处理
【判断题】
在机械设备中，凸轮表面误差将会引起扭转振动
【单选题】
What happens to the status of users already logged into ESXi Shell when a vSphere administrator enables lockdown mode?___
A. Users remain logged in and can run commands, except to disable lockdown mode.
B. Users remain logged in and can run commands, including disabling lockdown mode.
C. Users are immediately logged out of ESXi Shell.
D. Users are logged out after a timeout specified by the vSphere administrator.
【单选题】
What is the effective vSphere licensing level during the 60 day evaluation period?___
A. vSphere Foundation Essentials Plus
B. vSphere Standard
C. vSphere Enterprise
D. vSphere
E. nterprise Plus
【单选题】
To comply with security requirements, an administrator with a vCenter Server Appliance needs to force logoff of the vSphere web client after 10 minutes of inactivity.What should the administrator do to meet the requirement?___
A. Edit: /var/lib/vmware/vsphere-client/webclient.properties, modify session.timeout=10
B. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=600
C. Edit: /var/lib/vmware/vsphere-client/webclient.properties modify session.timeout=600
D. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=10
【单选题】
An administrator enables High Availability (HA) on a Virtual SAN cluster.Which network is used for HA Network Heatbeat configuration?___
A. The Management network.
B. The vMotion network.
C. The Virtual SAN network.
D. The Provisioning Traffic network.
【单选题】
A user wants to monitor a business-critical virtual machine to ensure that it doesn't run out of resources. What metric could be monitored in vRealize Operations to address this concern?___
A. Time Remaining badge
B. Compliance badge
C. Reclaimable Waste badge
D. Density badge
【单选题】
An administrator has recently installed a new ESXi 6.x Host, and during the configuration notices sporadic network problems. To check whether the issue occurred sometime during the configuration, the administrator would like to reset the system.How can this be accomplished in the shortest amount of time?___
A. Run the ESXi installer again and reinstall the host.
B. Select the Reset System Configuration option from the vSphere Client when connected directly to the host.
C. From the
D. irect Console User Interface, select Reset System Configuration.
【单选题】
A vApp is running out of compute resources when overall activity is high within the resource pool. At other times, everything is fine.What should be done to resolve this issue?___
A. Increase the size of the resource pool Shares.
B. Set the vApp's CPU and Memory Reservation Type to Expandable.
C. Set the vApp's CPU and Memory Limit to Unlimited.
D. Create a new resource pool with the existing hardware configuration.
【单选题】
A virtual machine has been renamed and an administrator is unable to find files with the new virtual machine name in the datastore.What is the reason for this?___
A. The names of the files on the datastore do not change.
B. The names of the files on the datastore have been corrupted.
C. The virtual machine needs to be re-added to the inventory.
D. The Distributed Resource Scheduler moved the virtual machine to another host.
【单选题】
An administrator has configured network connectivity for a new virtual machine, as shown in the Exhibit.What will occur with the network traffic of this virtual machine when communicating externally from vSwitch1?___
A. The virtual machine will communicate on both uplinks
B. The virtual machine will only communicate on vmnic1
C. The virtual machine will only communicate on vmnic2
D. The virtual machine will fail to communicate externally
【单选题】
An administrator is unable to create the first group in a new vRealize Operations environment. What is the likely cause of the problem?___
A. There are no group types defined.
B. The group is not defined in SSO.
C. There are more than 32 group types defined.
D. The description for the group is not provided.
【单选题】
A new vApp was built and tested in the corporate headquarters datacenter running vSphere 6.x. What condition would explain why the virtual machine is failing to boot in an offsite datacenter running on vSphere 5.5?___
A. The virtual machine was built with the default hardware version.
B. The VMFS 5 datastore is not compatible with virtual machines configured with vSphere 6.x.
C. a
D. RS 5.5 cluster cannot run virtual machines configured with vSphere 6.x.
【单选题】
An administrator is evaluating whether to deploy vCenter Server on a Windows server or on a vCenter Server appliance. The administrator has the following requirements: <A web browser will be utilized to manage the vSphere environment.> <16 ESXi hosts will be deployed.> <Licenses must be shared with a vCenter Server at another site.> <An external Oracle 10g database server will be used to host the vCenter Server database.> Why will the administrator need to deploy vCenter Server on a Windows server?___
A. Linked Mode is a requirement for the solution.
B. Oracle 10g is a requirement for the solution.
C. The vSphere web client is a requirement for the solution.
D. Management of more than 5 hosts is a requirement for the solution.
【单选题】
What is a benefit of using VMware Data Protection ?___
A. Provides support for guest-level backups and restores of Microsoft SQL Servers, Exchange Servers, and Share Point Servers.
B. Provides support for advanced storage services including replication, encryption, deduplication, and compression.
C. Provides direct access to VDP configuration integrated into the vSphere Client.
D. Reduces disk space consumed by virtual machine data using deduplication.
【单选题】
An administrator enables vSphere High Availability (HA) on an existing cluster with a large number of hosts and virtual machines. The administrator notices that the setup of vSphere HA on some of the hosts is failing. What step, if taken, might resolve this issue?___
A. Increase the value of the config.vpxd.das.electionWaitTimeSec setting.
B. Set the value of vpxd.das.aamMemoryLimit to 256.
C. Set the value of the das.useDefaultIsolationAddress setting to False.
D. Increase the value of the das.iostatsinterval setting.
【单选题】
An ESXi 6.x host consists of 24 logical cores. Hyperthreading is enabled on the host. What is the maximum number of vCPUs that can be assigned to a virtual machine on this host?___
【单选题】
By default, each ESXi 6.x host is provisioned with a certificate from which root certificate authority?___
A. RedHat Certificate Authority
B. VMware Certificate Authority
C. DigiCert Certificate Authority
D. Verisign Certificate Authority
【单选题】
An administrator is adding an NFS datastore as shown in the Exhibit. What is the purpose of the Servers to be added list?___
A. It contains the IP addresses of the NFS Storage Server to provide multipathing capability.
B. It contains the IP addresses of the ESXi hosts that mount the datastore.
C. It contains the IP addresses used for
D. ynamic Discovery of targets.
【单选题】
An administrator reports that the System Event log data is only available for 24 hours when reviewing the Hardware Status tab. Which condition could be responsible for the loss of data?___
A. A Reset event log was executed.
B. The statistical collection level was set to a value of 1.
C. The boot disk of the host is corrupt.
D. Syslog has been configured at the vCenter Server level.
【单选题】
During an upgrade, the ESXi 6.x installer finds an existing version of ESXi and a VMFS3 volume. No virtual machines exist on the host or VMFS3 volume. The requirement is to upgrade to VMFS5. Which option should be chosen to meet this requirement?___
A. Upgrade ESXi and preserve the VMFS datastore
B. Install ESXi and preserve the VMFS datastore
C. Install ESXi and overwrite the VMFS datastore
D. Upgrade
E. SXi and overwrite the VMFS datastore
【单选题】
A vSphere 6.x Standard Switch is configured with 4 virtual machine portgroups, as shown in the exhibit. Which portgroup would be utilized by default when creating a new virtual machine?___
A. Access Network
B. DMZ Network
C. VM Network
D. Virtual Machine Network
【单选题】
Which vSphere 6.x feature will allow an organization to utilize native snapshots?___
A. Virtual Volumes
B. Virtual SAN
C. VMFS3
D. VMFS5
【单选题】
An administrator is creating a new vSphere Distributed Switch that will be utilized with a specific vSphere Cluster. The cluster itself contains a mix of ESXi 5.x and 6.x Hosts. Which Distributed Switch version should be created to support this configuration?___
A. Distributed Switch: 6.0.0
B. Distributed Switch: 5.0.0
C. Distributed Switch: 5.1.0
D. Distributed Switch: 5.5.0
【单选题】
Which load balancing policy, previously limited to vSphere Distributed Switches, is now available on vSphere Standard Switches with vSphere 6.x?___
A. Route based on physical NIC workload
B. Route based on IP Hash
C. Route based on the originating virtual port
D. Route based on Source MAC Hash
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
An administrator has just completed performing an interactive installation of ESXi 6.x and is booting the host. How is the network initially configured?___
A. The network is configured by Automatic Private IP Addressing (APIPA).
B. The network is configured based on the settings detected in DNS.
C. The network is configured with the address as specified in the installer.
D. The network is automatically configured by DHCP.
【单选题】
You have just installed an ESXi 6.x Host. As part of your company security regulations, a security banner must be presented on the console of the host. How can this action be accomplished?___
A. Configure the Advanced Settings > Annotations screen of the ESXi host.
B. This is configured from the Direct Console User Interface configuration menu.
C. It is not possible to configure a security banner for the ESXi host.
D. From vCenter Server, this setting is configured globally in the vCenter Server configuration.
【单选题】
An administrator is only able to see the Health Badge when using the vRealize Operations user interface. What is the likely cause of this behavior?___
A. The vRealize Operations Foundation License is in use.
B. The vmware-sps service failed to start.
C. The vRealize Operations Standard License is in use.
D. The vmware-rbd-watchdog service failed to start.
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets either of these conditions: <High virtual CPU> <High active memory consumption.> <The alarm is only triggering when both of the conditions are met.> What can be done to correct the alarm behavior?___
A. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory and link them together with ESXCLI.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is attempting to restore a number of files in a directory within the Operating System of a virtual machine. How can the administrator restore the files from a previous backup? ___
A. Use the File Level Restore option from the selected backup of the virtual machine in the vSphere Web Client.
B. Connect to the File Level Restore tool from a web browser in the virtual machine.
C. Connect to the File Level Restore tool from the VMware
D. ata Protection appliance.
【单选题】
After selecting an object in vRealize Operations, how can a user compare the badge values of related child objects? ___
A. Use the Scoreboard tab
B. Use the Relationship tab
C. Use the Members tab
D. Use the Overview tab
【单选题】
You want to deploy a vApp and dynamically assign IP addresses without a DHCP server on the network. Which action would you take to accomplish this task? ___
A. Enable IP pools.
B. Configure a local DHCP server in the vApp.
C. Enable NAT on the vApp router.
D. Configure the guest OS for workgroup and WINS.
【单选题】
What is the optimal configuration when building a virtual machine for a single-threaded Windows application? ___
A. Deploy single-threaded applications on uniprocessor virtual machines.
B. Deploy single-threaded applications on symmetric multi-processor virtual machines.
C. Tune single-threaded applications to take advantage of symmetric multi-processor resources.
D. Tune Single-threaded applications at the hypervisor level.
推荐试题
【单选题】
列车整备原则上应使用外接电源供电，用电时间一般不超过___
A. 1 h
B. 2 h
C. 3 h
D. 4 h
【单选题】
新造25T型客车上线运行前，须进行通电、带载试运行，试运行距离原则上不得少于___
A. 500 km
B. 1 000 km
C. 1 500 km
D. 2 000 km
【单选题】
登高作业使用梯子，梯子与地面的倾斜角为___左右，并要有防滑装置
A. 30°
B. 45°
C. 60°
D. 80°
【单选题】
露天工作场所遇有___以上大风时禁止高空作业
【单选题】
使用手提式风钻、电钻，操作时站立位置要适当，钻孔高度不得超过工作者___，不得用力过猛
【单选题】
氧气瓶与乙炔发生器的距离应在___以上
A. 4 m
B. 5 m
C. 6 m
D. 7 m
【单选题】
氧气瓶及乙炔发生器的距离明火应在___以上
A. 5 m
B. 10 m
C. 15 m
D. 20 m
【单选题】
《铁路技术管理规程》是根据___与《铁路运输安全保护条例》制定的
A. 《铁路法》
B. 《劳动法》
C. 《宪法》
D. 《刑法》
【单选题】
铁路基本建设项目中的环境保护、水土保持、劳动安全、劳动卫生及消防等设施，必须和主体工程___
A. 同时设计、同时施工、同时投产
B. 请同时设计、同时施工、同时报废
C. 同时设计、同时投产、同时报废
D. 同时施工、同时投产、同时报废
【单选题】
车辆修程，客车和特种用途车按走行公里进行检修，最高运行速度不超过120 km/h的客车分为___
A. 厂修、辅修、临修
B. 厂修、段修、辅修
C. 段修、辅修、临修
D. 厂修、段修、临修
【单选题】
车辆须装有自动制动机和人力制动机，车辆的下拉杆、交叉杆、抗侧滚扭杆和___必须有保安装置
A. 制动梁、上拉杆
B. 制动梁、横向控制杆
C. 上拉杆、横向油压减振器
D. 制动梁、横向油压减振器
【单选题】
最高运行速度160 km/h及以上的客车应采用___，安装客车行车安全监测系统
A. 密接式车钩
B. 15号车钩
C. 中间体过渡车钩
D. 15号过渡车钩
【单选题】
列车按运输性质分为旅客列车、路用列车和___
A. 行邮行包列车、混合列车、货物列车
B. 行邮行包列车、混合列车、军用列车
C. 行邮行包列车、军用列车、货物列车
D. 货物列车、混合列车、军用列车
【单选题】
列车按运行等级分为：特快行邮列车、快速行邮列车、行包列车、军用列车、货物列车、路用列车和___
A. 特快旅客列车、快速旅客列车、低速旅客列车
B. 特快旅客列车、快速旅客列车、普通旅客列车
C. 特快旅客列车、普通旅客列车、低速旅客列车
D. 快速旅客列车、普通旅客列车、低速旅客列车
【单选题】
___须加锁
A. 乘坐旅客的车辆、与餐车相连接的客车端门、编挂在列车尾部的客车后端门
B. 乘坐旅客的车辆、与餐车相连接的客车端门、与机车、货车相连接的客车端门
C. 乘坐旅客的车辆、编挂在列车尾部的客车后端门、与机车、货车相连接的客车端门
D. 与机车、货车相连接的客车端门、与餐车相连接的客车端门、编挂在列车尾部的客车后端门
【单选题】
列车机车与第一辆车的连挂，由___负责
A. 调车人员
B. 机车乘务组
C. 车辆乘务员
D. 客列检人员
【单选题】
列车机车与第一辆车的车钩、软管、车端电气连接线的摘解，由___负责
A. 客列检人员
B. 机车乘务组
C. 车辆乘务员
D. 调车人员
【单选题】
列车机车与第一辆车的车钩、软管的摘解，无客列检作业时，由___负责
A. 客列检人员
B. 机车乘务组
C. 车辆乘务员
D. 调车人员
【单选题】
车辆乘务员代值乘运转车长时应携带的行车备品包括列车无线调度通信设备、手信号旗、手信号灯和___
A. 火炬、短路铜线、万用表
B. 火炬、短路铜线、响墩
C. 火炬、响墩、万用表
D. 短路铜线、响墩、万用表
【单选题】
进站色灯信号机显示一个黄色灯光，准许列车经道岔直向位置进入站内___
A. 侧线准备停车
B. 正线准备停车
C. 正线准备通过
D. 侧线准备通过
【单选题】
调车作业中，在空线上推进运行时，不准超过___
A. 5 km/h
B. 15 km/h
C. 30 km/h
D. 40 km/h
【单选题】
接近被连挂的车辆时，调车速度规定为___
A. 3 km/h
B. 不超过3 km/h
C. 5 km/h
D. 不超过5 km/h
【单选题】
发车表示器经常不着灯，显示___表示运转车长准许发车
A. 一个绿色灯光
B. 一个月白色灯光
C. 一个黄色灯光
D. 两个绿色灯光
【单选题】
半自动闭塞区段，超长列车越过出站信号机但未压上出站方面的轨道电路，发车的行车凭证是___
A. 出站信号机和进行信号
B. 调度命令
C. 路票
D. 出站信号机的进行信号和调度命令
【单选题】
进站，出站，进路，通过及防护信号机，均以显示___信号为定位
【单选题】
遇有施工又必须接发列车的特殊情况时，引导接车并正线通过时，准许列车凭特定引导手信号的显示，以不超过___速度进站
A. 15 km/h
B. 20 km/h
C. 60 km/h
D. 80 km/h
【单选题】
机车鸣笛，呼唤信号的鸣示方式是___
A. 一长一短声
B. 一长二短声
C. 一短一长声
D. 二短一长声
【单选题】
听觉信号，长声为3 s，短声为1 s，音响间隔为1 s，重复鸣示时，须间隔___以上
A. 3 s
B. 4 s
C. 5 s
D. 6 s
【单选题】
车机联控中，对列车运行监控装置故障的列车，车站值班员应于___，及时主动通知机车乘务员
A. 列车接近时
B. 进出站信号开放后
C. 列车从邻站出发后
D. 列车预告发车后
【单选题】
列车在区间发生冲突事故，在事故调查处理委员会人员到达前，___应随乘发往事故地点的第一列救援列车到达事故现场，负责指挥列车有关工作
A. 站长
B. 车站值班员
C. 站长或车站值班员
D. 救援列车主任
【单选题】
铁路线路分类中的特别用途线是指___
A. 安全线
B. 避难线
C. 安全线和避难线
D. 禁溜线和站修线
【单选题】
列车运行手信号显示为夜间高举的绿色灯光上下缓动，其含义是___
A. 通过手信号
B. 发车信号
C. 发车指示信号
D. 列车向前移动信号
【单选题】
列车运行手信号显示为夜间无红色灯光时，用白色灯光上下急剧摇动，含义是___
A. 停车信号
B. 减速信号
C. 取消信号
D. 告知显示错误信号
【单选题】
试验列车自动制动机，利用口笛、号角要求司机缓解时，鸣示方式为___
A. 二短声
B. 三短声
C. 一长声
D. 一长声一短声
【单选题】
电气化铁路区段的列检和乘务作业时，严禁___人员在电气设备处所倚靠或坐卧
【单选题】
车辆段___向铁路局上报客车配属统计情况
【单选题】
铁路局___向铁道部上报客车配属统计情况
【单选题】
客车报废自核准之日起取消配属，并在___内解体完毕
A. 1个月
B. 2个月
C. 3个月
D. 6个月
【单选题】
运用列车质量鉴定时，列车等级分四档，B级列车为___
A. 800～899分
B. 900～1 000分
C. 700～799分
D. 600～699分
【单选题】
铁路局管内运行的旅客列车可按走行公里确定入库检修周期，原则上运行___须入库检修一次
A. 2 000 km
B. 3 000 km
C. 4 000 km
D. 5 000 km
