刷题
导入试题
【判断题】
轴承预紧的目的是提高轴承支承的刚度,提高轴的旋转精度,降低轴的震动和噪声,降低轴之间的摩擦
A. 对
B. 错
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
A
解析
暂无解析
相关试题
【判断题】
经纬仪光学对中误差一般应小于1mm
A. 对
B. 错
【判断题】
转子材质的不均匀将会影响高速机械转子精度
A. 对
B. 错
【判断题】
镦粗加工工艺最好用于塑性好,延展性大的金属材料台阶轴或双联齿轮等毛坯件加工
A. 对
B. 错
【判断题】
为了保证大型设备基础的承载能力,一般采用钢筋温凝土整体浇灌的结构
A. 对
B. 错
【判断题】
多段床身接合面刮削时,将被刮的接合面端用枕木垫高的目的是便于刮研
A. 对
B. 错
【判断题】
更换清单,由主管工艺人员提出,由备件人员核定出价格,更换件包括机械,电器,液(气)压的备配件和外购件
A. 对
B. 错
【判断题】
任何提高劳动生产率的措施,都必须以经济效益为前提
A. 对
B. 错
【判断题】
精密机床导轨在的粗糙度要求是:每25mm×25mm在16~20点
A. 对
B. 错
【判断题】
工作台要牢固平稳,平台周围要保持整洁,通行要方便,1米内禁止堆放物件
A. 对
B. 错
【判断题】
两孔轴线相交成 90°角,一个孔直径为φ20mm,另一个孔直径是φ30mm,应该先钻穿直径大的孔
A. 对
B. 错
【判断题】
碳素工具钢和合金工具钢用于制造中、低速成型刀具
A. 对
B. 错
【判断题】
经纬仪整平时,经反复调整,直到仪器转到任意位置时,水准气泡最大偏离值小于二分之一格为止
A. 对
B. 错
【判断题】
刮削大型机床导轨面时,应在将导轨面上的零件全部拆除后进行,以保证刮削质量
A. 对
B. 错
【判断题】
要安排好培训计划,做好上课的准备工作,做到有组织,有计划地进行培训,做到定时间,定地点,定内容,定进度,定要求,有练习,有考核
A. 对
B. 错
【判断题】
轨道制作主要是轨道调直和接头,调直后对轨道进行编号,两条轨道上从端部或伸缩缝处算起,轨道接头至少要对齐,以使运转平稳
A. 对
B. 错
【判断题】
为实现电动机连续正转运行需采用具有接触器自锁的控制线路和手动正转控制回路
A. 对
B. 错
【判断题】
在修理带传动机构时,发现带轮孔超差额0.08mm,造成配合过松,一般可用镀铬法来加大轴颈尺寸
A. 对
B. 错
【判断题】
用经纬仪和平行光管测量机床转台分度误差时,应用专用心轴配装在转台中心孔中将经纬仪和心轴紧固联接在一起
A. 对
B. 错
【判断题】
采用双螺母螺纹式调整滚珠丝杠轴向间隙的方法结构紧凑,调整方便,应用广泛
A. 对
B. 错
【判断题】
若自准直仪上读数鼓轮每格角值分度值为1",则其线值分度值可用0.05mm/m表示
A. 对
B. 错
【判断题】
所有的紫色酒精,在 1 米内不准点有明火,不准放在暖气片上
A. 对
B. 错
【判断题】
固定式装配适用于单件和小批量模具的装配,以及装配精度要求较高,需要调整的部位较多的装配
A. 对
B. 错
【判断题】
我国对企业发生的事故,坚持“四不放过”原则进行处理
A. 对
B. 错
【判断题】
齿轮的齿侧间隙分为12 个等级
A. 对
B. 错
【判断题】
在机械设备中,凸轮表面误差将会引起扭转振动
A. 对
B. 错
【单选题】
What happens to the status of users already logged into ESXi Shell when a vSphere administrator enables lockdown mode?___
A. Users remain logged in and can run commands, except to disable lockdown mode.
B. Users remain logged in and can run commands, including disabling lockdown mode.
C. Users are immediately logged out of ESXi Shell.
D. Users are logged out after a timeout specified by the vSphere administrator.
【单选题】
What is the effective vSphere licensing level during the 60 day evaluation period?___
A. vSphere Foundation Essentials Plus
B. vSphere Standard
C. vSphere Enterprise
D. vSphere
E. nterprise Plus
【单选题】
To comply with security requirements, an administrator with a vCenter Server Appliance needs to force logoff of the vSphere web client after 10 minutes of inactivity.What should the administrator do to meet the requirement?___
A. Edit: /var/lib/vmware/vsphere-client/webclient.properties, modify session.timeout=10
B. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=600
C. Edit: /var/lib/vmware/vsphere-client/webclient.properties modify session.timeout=600
D. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=10
【单选题】
An administrator enables High Availability (HA) on a Virtual SAN cluster.Which network is used for HA Network Heatbeat configuration?___
A. The Management network.
B. The vMotion network.
C. The Virtual SAN network.
D. The Provisioning Traffic network.
【单选题】
A user wants to monitor a business-critical virtual machine to ensure that it doesn't run out of resources. What metric could be monitored in vRealize Operations to address this concern?___
A. Time Remaining badge
B. Compliance badge
C. Reclaimable Waste badge
D. Density badge
【单选题】
An administrator has recently installed a new ESXi 6.x Host, and during the configuration notices sporadic network problems. To check whether the issue occurred sometime during the configuration, the administrator would like to reset the system.How can this be accomplished in the shortest amount of time?___
A. Run the ESXi installer again and reinstall the host.
B. Select the Reset System Configuration option from the vSphere Client when connected directly to the host.
C. From the
D. irect Console User Interface, select Reset System Configuration.
【单选题】
A vApp is running out of compute resources when overall activity is high within the resource pool. At other times, everything is fine.What should be done to resolve this issue?___
A. Increase the size of the resource pool Shares.
B. Set the vApp's CPU and Memory Reservation Type to Expandable.
C. Set the vApp's CPU and Memory Limit to Unlimited.
D. Create a new resource pool with the existing hardware configuration.
【单选题】
A virtual machine has been renamed and an administrator is unable to find files with the new virtual machine name in the datastore.What is the reason for this?___
A. The names of the files on the datastore do not change.
B. The names of the files on the datastore have been corrupted.
C. The virtual machine needs to be re-added to the inventory.
D. The Distributed Resource Scheduler moved the virtual machine to another host.
【单选题】
An administrator has configured network connectivity for a new virtual machine, as shown in the Exhibit.What will occur with the network traffic of this virtual machine when communicating externally from vSwitch1?___
A. The virtual machine will communicate on both uplinks
B. The virtual machine will only communicate on vmnic1
C. The virtual machine will only communicate on vmnic2
D. The virtual machine will fail to communicate externally
【单选题】
An administrator is unable to create the first group in a new vRealize Operations environment. What is the likely cause of the problem?___
A. There are no group types defined.
B. The group is not defined in SSO.
C. There are more than 32 group types defined.
D. The description for the group is not provided.
【单选题】
A new vApp was built and tested in the corporate headquarters datacenter running vSphere 6.x. What condition would explain why the virtual machine is failing to boot in an offsite datacenter running on vSphere 5.5?___
A. The virtual machine was built with the default hardware version.
B. The VMFS 5 datastore is not compatible with virtual machines configured with vSphere 6.x.
C. a
D. RS 5.5 cluster cannot run virtual machines configured with vSphere 6.x.
【单选题】
An administrator is evaluating whether to deploy vCenter Server on a Windows server or on a vCenter Server appliance. The administrator has the following requirements: <A web browser will be utilized to manage the vSphere environment.> <16 ESXi hosts will be deployed.> <Licenses must be shared with a vCenter Server at another site.> <An external Oracle 10g database server will be used to host the vCenter Server database.> Why will the administrator need to deploy vCenter Server on a Windows server?___
A. Linked Mode is a requirement for the solution.
B. Oracle 10g is a requirement for the solution.
C. The vSphere web client is a requirement for the solution.
D. Management of more than 5 hosts is a requirement for the solution.
【单选题】
What is a benefit of using VMware Data Protection ?___
A. Provides support for guest-level backups and restores of Microsoft SQL Servers, Exchange Servers, and Share Point Servers.
B. Provides support for advanced storage services including replication, encryption, deduplication, and compression.
C. Provides direct access to VDP configuration integrated into the vSphere Client.
D. Reduces disk space consumed by virtual machine data using deduplication.
【单选题】
An administrator enables vSphere High Availability (HA) on an existing cluster with a large number of hosts and virtual machines. The administrator notices that the setup of vSphere HA on some of the hosts is failing. What step, if taken, might resolve this issue?___
A. Increase the value of the config.vpxd.das.electionWaitTimeSec setting.
B. Set the value of vpxd.das.aamMemoryLimit to 256.
C. Set the value of the das.useDefaultIsolationAddress setting to False.
D. Increase the value of the das.iostatsinterval setting.
【单选题】
An ESXi 6.x host consists of 24 logical cores. Hyperthreading is enabled on the host. What is the maximum number of vCPUs that can be assigned to a virtual machine on this host?___
A. 24
B. 48
C. 64
D. 128
推荐试题
【单选题】
四输入的译码器,其输出端最多为___。
A. 4个
B. 8个
C. 10个
D. 16个
【单选题】
当74LS148的输入端按顺序输入11011101时,输出为___。
A. 101
B. 010
C. 001
D. 110
【单选题】
用三线-八线译码器74LS138和辅助门电路实现逻辑函数Y=a2+a1a2,应___。
A. 用与非门,Y=y0y1y4y5y6y7
B. 用与门,Y=y2y3
C. 用或门,Y=y2+y3
D. 用或门,Y=y0+y1+y4+y5+y6+y7
【单选题】
37时序逻辑电路中一定包含___。
A. 触发器
B. 组合逻辑电路
C. 移位寄存器
D. 译码器
【单选题】
仅具有置“0”和置“1”功能的触发器是___。
A. 基本RS触发器
B. 钟控RS触发器
C. D触发器
D. JK触发器
【单选题】
由与非门组成的基本RS触发器不允许输入的变量组合为___。
A. 00
B. 01
C. 10
D. 11
【单选题】
40仅具有保持和翻转功能的触发器是___。
A. JK触发器
B. T触发器
C. D触发器
D. T' 触发器
【单选题】
触发器由门电路构成,但它不同于门电路功能,主要特点是___。
A. 具有翻转功能
B. 具有保持功能
C. 具有记忆功能
【单选题】
TTL集成触发器直接置0端[]和直接置1端[]在触发器正常工作时应___。
A. =1,=0
B. =0,=1
C. 保持高电平“1”
D. 保持低电平“0”
【单选题】
按逻辑功能的不同,双稳态触发器可分为___。
A. RS、JK、D、T等
B. 主从型和维持阻塞型
C. TTL型和MOS型
D. 上述均包括
【单选题】
同步计数器和异步计数器比较,同步计数器的显著优点是___。
A. 工作速度高
B. 触发器利用率高
C. 电路简单
D. 不受时钟CP控制。
【单选题】
把一个五进制计数器与一个四进制计数器串联可得到___进制计数器。
A. 4
B. 5
C. 9
D. 20
【单选题】
下列逻辑电路中为时序逻辑电路的是___ 。
A. 变量译码器
B. 加法器
C. 数码寄存器
D. 数据选择器
【单选题】
47N个触发器可以构成最大计数长度{进制数}为___ 的计数器。
A. N
B. 2N
C. N2
D. 2N
【单选题】
N个触发器可以构成能寄存___位二进制数码的寄存器。
A. N-1
B. N
C. N+1
D. 2N
【单选题】
49五个D触发器构成环形计数器,其计数长度为___。
A. 5
B. 10
C. 25
D. 32
【单选题】
同步时序电路和异步时序电路比较,其差异在于后者___。
A. 没有触发器
B. 没有统一的时钟脉冲控制
C. 没有稳定状态
D. 输出只与内部状态有关
【单选题】
一位8421BCD码计数器至少需要___个触发器。
A. 3
B. 4
C. 5
D. 10
【单选题】
某电视机水平-垂直扫描发生器需要一个分频器将31500HZ的脉冲转换为60HZ的脉冲,欲构成此分频器至少需要___个触发器。
A. 10
B. 60
C. 525
D. 31500
【单选题】
555定时器属于___
A. 时序逻辑电路
B. 组合逻辑电路
C. 模拟电子电路
【单选题】
54多谐振荡器可产生 ___
A. 正弦波
B. 矩形脉冲
C. 三角波
D. 锯齿波
【单选题】
脉冲整形电路有___。
A. 多谐振荡器
B. 施密特触发器
C. 555定时器
【单选题】
56石英晶体多谐振荡器的突出优点是___ 。
A. 速度高
B. 电路简单
C. 振荡频率稳定
D. 输出波形边沿陡峭
【单选题】
TTL单定时器型号的最后几位数字为___。
A. 555
B. 556
C. 7555
D. 7556
【单选题】
555定时器不可以组成___。
A. 多谐振荡器
B. 单稳态触发器
C. 施密特触发器
D. JK触发器
【单选题】
59以下各电路中,___可以产生脉冲定时。
A. 多谐振荡器
B. 单稳态触发器
C. 施密特触发器
D. 石英晶体多谐振荡器
【单选题】
555定时电路端不用时,应当___。
A. 接高电平
B. 接低电平
C. 通过0.01µF的电容接地
D. 通过小于500Ω的电阻接地
【单选题】
89S51的内部程序存储器与数据存储器容量各为多少?___
A. 64KB、128B
B. 4KB、64KB
C. 4KB、128B
D. 8KB、256B
【单选题】
89S51比89C51多出了哪个功能?___
A. 存储器加倍
B. 具有WDT工能
C. 多了一个8位输入/输出端口
D. 多了一个串行口
【单选题】
6在DIP40封装的8×51芯片里,复位RESET引脚的引脚编号是什么?___
A. 9
B. 19
C. 29
D. 39
【单选题】
7在DIP40封装的8×51芯片里,接地引脚与电源引脚的引脚编号是什么?___
A. 1、21
B. 11.31
C. 20、40
D. 19、39
【单选题】
9在12MHz始终脉冲的8051系统里,一个机器周期有多长?___
A. 1µs
B. 12µs
C. 1ms
D. 12ms
【单选题】
12下列哪个寄存器是8×51内的16位寄存器?___
A. CC
B. C
C. PC
D. R7
【单选题】
14在8×51的输入/输出端口里,哪个输入/输出端口执行在输出功能时没有内部上拉电阻?___
A. P0
B. P1
C. P2
D. P3
【单选题】
8×51的P0采用哪种电路结构?___
A. 集电极开路式输出
B. 基极开路式输出
C. 发射机开路式输出
D. 图腾柱输出
【单选题】
17在8×51里,若要扩展外部存储器时,数据总线连接哪个输入/输出端口?___
A. P0
B. P1
C. P2
D. P3
【单选题】
点亮一般的LED所耗用的电流约为多少?___
A. 1~5µA
B. 10~20µA
C. 1~5mA
D. 10~20mA
【单选题】
19一般地,蜂鸣器属于哪种负载?___
A. 电阻性负载
B. 电感性负载
C. 电容性负载
D. 不导电负载
【单选题】
7405/7406的输出采用哪种电路结构?___
A. 集电极开路式输出
B. 基极开路式输出
C. 发射机开路式输出
D. 图腾柱输出
【单选题】
21在继电器中,NO接点是一种什么接点?___
A. 不使用接点
B. 不存在接点
C. 激磁后即开路的接点
D. 常开接点
欢迎使用我爱刷题
×
微信搜索我爱刷题小程序
温馨提示
×
请在电脑上登陆“www.woaishuati.com”使用