【判断题】
为了保证大型设备基础的承载能力，一般采用钢筋温凝土整体浇灌的结构
查看试卷，进入试卷练习
微信扫一扫，开始刷题
相关试题
【判断题】
多段床身接合面刮削时，将被刮的接合面端用枕木垫高的目的是便于刮研
【判断题】
更换清单，由主管工艺人员提出，由备件人员核定出价格，更换件包括机械，电器，液(气)压的备配件和外购件
【判断题】
任何提高劳动生产率的措施，都必须以经济效益为前提
【判断题】
精密机床导轨在的粗糙度要求是：每25mm×25mm在16～20点
【判断题】
工作台要牢固平稳，平台周围要保持整洁，通行要方便，１米内禁止堆放物件
【判断题】
两孔轴线相交成 90°角，一个孔直径为φ20mm，另一个孔直径是φ30mm，应该先钻穿直径大的孔
【判断题】
碳素工具钢和合金工具钢用于制造中、低速成型刀具
【判断题】
经纬仪整平时，经反复调整，直到仪器转到任意位置时，水准气泡最大偏离值小于二分之一格为止
【判断题】
刮削大型机床导轨面时，应在将导轨面上的零件全部拆除后进行，以保证刮削质量
【判断题】
要安排好培训计划，做好上课的准备工作，做到有组织，有计划地进行培训，做到定时间，定地点，定内容，定进度，定要求，有练习，有考核
【判断题】
轨道制作主要是轨道调直和接头，调直后对轨道进行编号，两条轨道上从端部或伸缩缝处算起，轨道接头至少要对齐，以使运转平稳
【判断题】
为实现电动机连续正转运行需采用具有接触器自锁的控制线路和手动正转控制回路
【判断题】
在修理带传动机构时，发现带轮孔超差额0.08mm，造成配合过松，一般可用镀铬法来加大轴颈尺寸
【判断题】
用经纬仪和平行光管测量机床转台分度误差时，应用专用心轴配装在转台中心孔中将经纬仪和心轴紧固联接在一起
【判断题】
采用双螺母螺纹式调整滚珠丝杠轴向间隙的方法结构紧凑，调整方便，应用广泛
【判断题】
若自准直仪上读数鼓轮每格角值分度值为1"，则其线值分度值可用0.05mm/m表示
【判断题】
所有的紫色酒精，在 1 米内不准点有明火，不准放在暖气片上
【判断题】
固定式装配适用于单件和小批量模具的装配，以及装配精度要求较高，需要调整的部位较多的装配
【判断题】
我国对企业发生的事故，坚持“四不放过”原则进行处理
【判断题】
在机械设备中，凸轮表面误差将会引起扭转振动
【单选题】
What happens to the status of users already logged into ESXi Shell when a vSphere administrator enables lockdown mode?___
A. Users remain logged in and can run commands, except to disable lockdown mode.
B. Users remain logged in and can run commands, including disabling lockdown mode.
C. Users are immediately logged out of ESXi Shell.
D. Users are logged out after a timeout specified by the vSphere administrator.
【单选题】
What is the effective vSphere licensing level during the 60 day evaluation period?___
A. vSphere Foundation Essentials Plus
B. vSphere Standard
C. vSphere Enterprise
D. vSphere
E. nterprise Plus
【单选题】
To comply with security requirements, an administrator with a vCenter Server Appliance needs to force logoff of the vSphere web client after 10 minutes of inactivity.What should the administrator do to meet the requirement?___
A. Edit: /var/lib/vmware/vsphere-client/webclient.properties, modify session.timeout=10
B. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=600
C. Edit: /var/lib/vmware/vsphere-client/webclient.properties modify session.timeout=600
D. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=10
【单选题】
An administrator enables High Availability (HA) on a Virtual SAN cluster.Which network is used for HA Network Heatbeat configuration?___
A. The Management network.
B. The vMotion network.
C. The Virtual SAN network.
D. The Provisioning Traffic network.
【单选题】
A user wants to monitor a business-critical virtual machine to ensure that it doesn't run out of resources. What metric could be monitored in vRealize Operations to address this concern?___
A. Time Remaining badge
B. Compliance badge
C. Reclaimable Waste badge
D. Density badge
【单选题】
An administrator has recently installed a new ESXi 6.x Host, and during the configuration notices sporadic network problems. To check whether the issue occurred sometime during the configuration, the administrator would like to reset the system.How can this be accomplished in the shortest amount of time?___
A. Run the ESXi installer again and reinstall the host.
B. Select the Reset System Configuration option from the vSphere Client when connected directly to the host.
C. From the
D. irect Console User Interface, select Reset System Configuration.
【单选题】
A vApp is running out of compute resources when overall activity is high within the resource pool. At other times, everything is fine.What should be done to resolve this issue?___
A. Increase the size of the resource pool Shares.
B. Set the vApp's CPU and Memory Reservation Type to Expandable.
C. Set the vApp's CPU and Memory Limit to Unlimited.
D. Create a new resource pool with the existing hardware configuration.
【单选题】
A virtual machine has been renamed and an administrator is unable to find files with the new virtual machine name in the datastore.What is the reason for this?___
A. The names of the files on the datastore do not change.
B. The names of the files on the datastore have been corrupted.
C. The virtual machine needs to be re-added to the inventory.
D. The Distributed Resource Scheduler moved the virtual machine to another host.
【单选题】
An administrator has configured network connectivity for a new virtual machine, as shown in the Exhibit.What will occur with the network traffic of this virtual machine when communicating externally from vSwitch1?___
A. The virtual machine will communicate on both uplinks
B. The virtual machine will only communicate on vmnic1
C. The virtual machine will only communicate on vmnic2
D. The virtual machine will fail to communicate externally
【单选题】
An administrator is unable to create the first group in a new vRealize Operations environment. What is the likely cause of the problem?___
A. There are no group types defined.
B. The group is not defined in SSO.
C. There are more than 32 group types defined.
D. The description for the group is not provided.
【单选题】
A new vApp was built and tested in the corporate headquarters datacenter running vSphere 6.x. What condition would explain why the virtual machine is failing to boot in an offsite datacenter running on vSphere 5.5?___
A. The virtual machine was built with the default hardware version.
B. The VMFS 5 datastore is not compatible with virtual machines configured with vSphere 6.x.
C. a
D. RS 5.5 cluster cannot run virtual machines configured with vSphere 6.x.
【单选题】
An administrator is evaluating whether to deploy vCenter Server on a Windows server or on a vCenter Server appliance. The administrator has the following requirements: <A web browser will be utilized to manage the vSphere environment.> <16 ESXi hosts will be deployed.> <Licenses must be shared with a vCenter Server at another site.> <An external Oracle 10g database server will be used to host the vCenter Server database.> Why will the administrator need to deploy vCenter Server on a Windows server?___
A. Linked Mode is a requirement for the solution.
B. Oracle 10g is a requirement for the solution.
C. The vSphere web client is a requirement for the solution.
D. Management of more than 5 hosts is a requirement for the solution.
【单选题】
What is a benefit of using VMware Data Protection ?___
A. Provides support for guest-level backups and restores of Microsoft SQL Servers, Exchange Servers, and Share Point Servers.
B. Provides support for advanced storage services including replication, encryption, deduplication, and compression.
C. Provides direct access to VDP configuration integrated into the vSphere Client.
D. Reduces disk space consumed by virtual machine data using deduplication.
【单选题】
An administrator enables vSphere High Availability (HA) on an existing cluster with a large number of hosts and virtual machines. The administrator notices that the setup of vSphere HA on some of the hosts is failing. What step, if taken, might resolve this issue?___
A. Increase the value of the config.vpxd.das.electionWaitTimeSec setting.
B. Set the value of vpxd.das.aamMemoryLimit to 256.
C. Set the value of the das.useDefaultIsolationAddress setting to False.
D. Increase the value of the das.iostatsinterval setting.
【单选题】
An ESXi 6.x host consists of 24 logical cores. Hyperthreading is enabled on the host. What is the maximum number of vCPUs that can be assigned to a virtual machine on this host?___
【单选题】
By default, each ESXi 6.x host is provisioned with a certificate from which root certificate authority?___
A. RedHat Certificate Authority
B. VMware Certificate Authority
C. DigiCert Certificate Authority
D. Verisign Certificate Authority
【单选题】
An administrator is adding an NFS datastore as shown in the Exhibit. What is the purpose of the Servers to be added list?___
A. It contains the IP addresses of the NFS Storage Server to provide multipathing capability.
B. It contains the IP addresses of the ESXi hosts that mount the datastore.
C. It contains the IP addresses used for
D. ynamic Discovery of targets.
【单选题】
An administrator reports that the System Event log data is only available for 24 hours when reviewing the Hardware Status tab. Which condition could be responsible for the loss of data?___
A. A Reset event log was executed.
B. The statistical collection level was set to a value of 1.
C. The boot disk of the host is corrupt.
D. Syslog has been configured at the vCenter Server level.
【单选题】
During an upgrade, the ESXi 6.x installer finds an existing version of ESXi and a VMFS3 volume. No virtual machines exist on the host or VMFS3 volume. The requirement is to upgrade to VMFS5. Which option should be chosen to meet this requirement?___
A. Upgrade ESXi and preserve the VMFS datastore
B. Install ESXi and preserve the VMFS datastore
C. Install ESXi and overwrite the VMFS datastore
D. Upgrade
E. SXi and overwrite the VMFS datastore
推荐试题
【单选题】
边长超过___的洞口，四周设防护栏杆，洞口下张设安全平网。
A. 130cm
B. 150cm
C. 180cm
D. 200cm
【单选题】
梯脚底部应坚实，不得垫高使用。立梯工作角度以___为宜？
A. 60°±5°
B. 65°±5°
C. 70°±5°
D. 75°±5°
【单选题】
使用直爬梯进行攀登作业时，攀登高度以多高为宜？___
【单选题】
支设高度在___以上的柱模板，四周应设斜撑，并应设立操作平台。
A. 2m
B. 2.5m
C. 3m
D. 3.5m
【单选题】
进行各项窗口作业时，操作人员的重心应位于___。
【单选题】
安装管道时必须有已完结构或___为立足点，严禁在安装中的管道上站立和行走。
A. 脚手架
B. 模板
C. 折梯
D. 操作平台
【单选题】
各种垂直运输接料平台，除两侧设防护栏杆外，平台口还应设置___或活动防护栏杆。
A. 安全围栏
B. 安全门
C. 安全立网
D. 竹笆
【单选题】
临边防护栏杆采用钢筋作杆件时，上杆直径不应小于16mm，下杆直径不应小于14 mm，栏杆柱直径不应小于___
A. 14 mm
B. 16 mm
C. 18 mm
D. 20 mm
【单选题】
梯子如需接长使用，必须有可靠的连接措施，连接后梯梁的强度，不应低于___。
A. 单梯梯梁强度的90%
B. 单梯梯梁强度的80%
C. 单梯梯梁强度的70%
D. 单梯梯梁的强度
【单选题】
上下梯子时，必须___梯子，且不得手持器物。
A. 背面
B. 左侧向
C. 右侧向
D. 面向
【单选题】
密目式安全网每10㎝×10㎝=100㎝2面积上有多少个以上的网目？___
A. 800个
B. 1000个
C. 1500个
D. 2000个
【单选题】
安全带的报废年限为多少？___
A. 1-2年
B. 2-3年
C. 3-5年
D. 4-5年
【单选题】
施工现场专用的，电源中性点直接接地的220/380V三相四线制用电工程中，必须采用的接地保护型式是___。
A. TN
B. TN-S
C. TN-C
D. TT
【单选题】
施工现场用电工程中，PE线上每处重复接地的接地电阻值不应大于___。
A. 4Ω
B. 10Ω
C. 15Ω
D. 30Ω
【单选题】
施工现场用电系统中，连接用电设备外露可导电部分的PE线应采用___。
A. 绝缘铜线
B. 绝缘铝线
C. 裸铜线
D. 钢筋
【单选题】
施工现场用电系统中，N线的绝缘色应是___。
【单选题】
在建工程（含脚手架具）周边与10kV外电架空线路边线之间的最小安全操作距离应是___。
【单选题】
施工现场用电工程中，PE线的重复接地点不应少于___。
【单选题】
架空线路的同一横担上，L1___、L2（B）、L3（C）、N、PE五条线的排列次序是面向负荷侧从左起依次为（ B）。
A. L1、、L2、、L3、、N、PE
B. L1、、N、L2、、L3、、PE
C. L1、、L2、、N、L3、、PE
D. PE、N、L1、、L2、、L3
【单选题】
配电柜后面的维护通道宽度，单列布置或双列背对背布置时不应小于___。
A. 1.5m
B. 1.0m
C. 0.8m
D. 0.5m
【单选题】
总配电箱中漏电保护器的额定漏电动作电流IΔ和额定漏电动作时间TΔ的选择要求是___。
A. IΔ>30mA，TΔ=0.1S
B. IΔ=30mA，TΔ>0.1
C. IΔ>30mA，TΔ>0.1S
D. IΔ>30mA，TΔ>0.1S，IΔ·TΔ≯30mA·0.1S
【单选题】
移动式配电箱、开关箱中心点与地面的相对高度可为___。
A. 0.3m
B. 0.6m
C. 0.9m
D. 1.8m
【单选题】
间接接触触电的主要保护措施是在配电装置中设置___。
A. 隔离开关
B. 漏电保护器
C. 断路器
D. 熔断器
【单选题】
开关箱与用电设备的水平距离不宜超过___。
【单选题】
固定式配电箱开关箱中心点与地面的相对高度应为___。
A. 0.5m
B. 1.0m
C. 1.5m
D. 1.8m
【单选题】
一般场所开关箱中漏电保护器，其额定漏电动作电流为___。
A. 10mA
B. 20mA
C. 30mA
D. ≯30mA
【单选题】
潮湿场所开关箱中的漏电保护器，其额定漏电动作电流为___。
A. 15mA
B. ≯15mA
C. 30mA
D. ≯30mA
【单选题】
开关箱中漏电保护器的额定漏电动作时间为___。
A. 0.1s
B. ≯0.1s
C. 0.2s
D. ≯0.2s
【单选题】
露天、潮湿场所或在金属构架上操作时，必须选用___手持式电动工具，并装设防溅的漏电保护器。
A. Ⅰ类
B. Ⅱ类
C. Ⅰ类和Ⅱ类
D. Ⅲ类
【单选题】
电焊机一次侧电源线的长度不应大于___。
A. 3m
B. 5m
C. 10m
D. 15m
【单选题】
电焊机二次线可采用___。
A. 防水橡皮护套铜芯软电缆
B. 绝缘铜线
C. 绝缘铝线
D. 绝缘导线和结构钢筋（作为地线）
【单选题】
施工现场内所有防雷装置的冲击接地电阻值为不得大于___。
A. 1Ω
B. 4Ω
C. 10Ω
D. 30Ω
【单选题】
室内固定式灯具的安装高度应为___。
A. ≥2.5m
B. >2m
C. 2m
D. 1.8m
【单选题】
聚光灯和碘钨灯等高热灯具距易燃物的防护距离为不小于___。
A. 200mm
B. 300mm
C. 500mm
D. 400mm
【单选题】
在潮湿场所施工，照明电源电压不应大于___。
A. 36V
B. 24V
C. 12V
D. 6V
【单选题】
在金属容器内施工，照明电源电压不应大于___。
A. 36V
B. 24V
C. 12V
D. 6V
【单选题】
高空施焊时必须使用标准的___，戴好符合规定的安全帽。
A. 防火焊具
B. 防火安全带
C. 工作服
D. 防火工具
【单选题】
严禁将施焊把线绕在___或搭在背上。
A. 身上
B. 工件上
C. 脚手架上
D. 建筑物上
【单选题】
焊接作业时，___将施焊把线绕在身上或搭在背上。
【单选题】
施焊完成或下班时必须拉闸断电，要留有充分时间观察，确认___后，方可离去。
A. 周围无易爆物
B. 周围无易燃物
C. 已熄灭
D. 无复燃的危险
