相关试题
【判断题】
镦粗加工工艺最好用于塑性好,延展性大的金属材料台阶轴或双联齿轮等毛坯件加工
【判断题】
为了保证大型设备基础的承载能力,一般采用钢筋温凝土整体浇灌的结构
【判断题】
多段床身接合面刮削时,将被刮的接合面端用枕木垫高的目的是便于刮研
【判断题】
更换清单,由主管工艺人员提出,由备件人员核定出价格,更换件包括机械,电器,液(气)压的备配件和外购件
【判断题】
任何提高劳动生产率的措施,都必须以经济效益为前提
【判断题】
精密机床导轨在的粗糙度要求是:每25mm×25mm在16~20点
【判断题】
工作台要牢固平稳,平台周围要保持整洁,通行要方便,1米内禁止堆放物件
【判断题】
两孔轴线相交成 90°角,一个孔直径为φ20mm,另一个孔直径是φ30mm,应该先钻穿直径大的孔
【判断题】
碳素工具钢和合金工具钢用于制造中、低速成型刀具
【判断题】
经纬仪整平时,经反复调整,直到仪器转到任意位置时,水准气泡最大偏离值小于二分之一格为止
【判断题】
刮削大型机床导轨面时,应在将导轨面上的零件全部拆除后进行,以保证刮削质量
【判断题】
要安排好培训计划,做好上课的准备工作,做到有组织,有计划地进行培训,做到定时间,定地点,定内容,定进度,定要求,有练习,有考核
【判断题】
轨道制作主要是轨道调直和接头,调直后对轨道进行编号,两条轨道上从端部或伸缩缝处算起,轨道接头至少要对齐,以使运转平稳
【判断题】
为实现电动机连续正转运行需采用具有接触器自锁的控制线路和手动正转控制回路
【判断题】
在修理带传动机构时,发现带轮孔超差额0.08mm,造成配合过松,一般可用镀铬法来加大轴颈尺寸
【判断题】
用经纬仪和平行光管测量机床转台分度误差时,应用专用心轴配装在转台中心孔中将经纬仪和心轴紧固联接在一起
【判断题】
采用双螺母螺纹式调整滚珠丝杠轴向间隙的方法结构紧凑,调整方便,应用广泛
【判断题】
若自准直仪上读数鼓轮每格角值分度值为1",则其线值分度值可用0.05mm/m表示
【判断题】
所有的紫色酒精,在 1 米内不准点有明火,不准放在暖气片上
【判断题】
固定式装配适用于单件和小批量模具的装配,以及装配精度要求较高,需要调整的部位较多的装配
【判断题】
我国对企业发生的事故,坚持“四不放过”原则进行处理
【判断题】
在机械设备中,凸轮表面误差将会引起扭转振动
【单选题】
What happens to the status of users already logged into ESXi Shell when a vSphere administrator enables lockdown mode?___
A. Users remain logged in and can run commands, except to disable lockdown mode.
B. Users remain logged in and can run commands, including disabling lockdown mode.
C. Users are immediately logged out of ESXi Shell.
D. Users are logged out after a timeout specified by the vSphere administrator.
【单选题】
What is the effective vSphere licensing level during the 60 day evaluation period?___
A. vSphere Foundation Essentials Plus
B. vSphere Standard
C. vSphere Enterprise
D. vSphere
E. nterprise Plus
【单选题】
To comply with security requirements, an administrator with a vCenter Server Appliance needs to force logoff of the vSphere web client after 10 minutes of inactivity.What should the administrator do to meet the requirement?___
A. Edit: /var/lib/vmware/vsphere-client/webclient.properties, modify session.timeout=10
B. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=600
C. Edit: /var/lib/vmware/vsphere-client/webclient.properties modify session.timeout=600
D. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=10
【单选题】
An administrator enables High Availability (HA) on a Virtual SAN cluster.Which network is used for HA Network Heatbeat configuration?___
A. The Management network.
B. The vMotion network.
C. The Virtual SAN network.
D. The Provisioning Traffic network.
【单选题】
A user wants to monitor a business-critical virtual machine to ensure that it doesn't run out of resources. What metric could be monitored in vRealize Operations to address this concern?___
A. Time Remaining badge
B. Compliance badge
C. Reclaimable Waste badge
D. Density badge
【单选题】
An administrator has recently installed a new ESXi 6.x Host, and during the configuration notices sporadic network problems. To check whether the issue occurred sometime during the configuration, the administrator would like to reset the system.How can this be accomplished in the shortest amount of time?___
A. Run the ESXi installer again and reinstall the host.
B. Select the Reset System Configuration option from the vSphere Client when connected directly to the host.
C. From the
D. irect Console User Interface, select Reset System Configuration.
【单选题】
A vApp is running out of compute resources when overall activity is high within the resource pool. At other times, everything is fine.What should be done to resolve this issue?___
A. Increase the size of the resource pool Shares.
B. Set the vApp's CPU and Memory Reservation Type to Expandable.
C. Set the vApp's CPU and Memory Limit to Unlimited.
D. Create a new resource pool with the existing hardware configuration.
【单选题】
A virtual machine has been renamed and an administrator is unable to find files with the new virtual machine name in the datastore.What is the reason for this?___
A. The names of the files on the datastore do not change.
B. The names of the files on the datastore have been corrupted.
C. The virtual machine needs to be re-added to the inventory.
D. The Distributed Resource Scheduler moved the virtual machine to another host.
【单选题】
An administrator has configured network connectivity for a new virtual machine, as shown in the Exhibit.What will occur with the network traffic of this virtual machine when communicating externally from vSwitch1?___
A. The virtual machine will communicate on both uplinks
B. The virtual machine will only communicate on vmnic1
C. The virtual machine will only communicate on vmnic2
D. The virtual machine will fail to communicate externally
【单选题】
An administrator is unable to create the first group in a new vRealize Operations environment. What is the likely cause of the problem?___
A. There are no group types defined.
B. The group is not defined in SSO.
C. There are more than 32 group types defined.
D. The description for the group is not provided.
【单选题】
A new vApp was built and tested in the corporate headquarters datacenter running vSphere 6.x. What condition would explain why the virtual machine is failing to boot in an offsite datacenter running on vSphere 5.5?___
A. The virtual machine was built with the default hardware version.
B. The VMFS 5 datastore is not compatible with virtual machines configured with vSphere 6.x.
C. a
D. RS 5.5 cluster cannot run virtual machines configured with vSphere 6.x.
【单选题】
An administrator is evaluating whether to deploy vCenter Server on a Windows server or on a vCenter Server appliance. The administrator has the following requirements: <A web browser will be utilized to manage the vSphere environment.> <16 ESXi hosts will be deployed.> <Licenses must be shared with a vCenter Server at another site.> <An external Oracle 10g database server will be used to host the vCenter Server database.> Why will the administrator need to deploy vCenter Server on a Windows server?___
A. Linked Mode is a requirement for the solution.
B. Oracle 10g is a requirement for the solution.
C. The vSphere web client is a requirement for the solution.
D. Management of more than 5 hosts is a requirement for the solution.
【单选题】
What is a benefit of using VMware Data Protection ?___
A. Provides support for guest-level backups and restores of Microsoft SQL Servers, Exchange Servers, and Share Point Servers.
B. Provides support for advanced storage services including replication, encryption, deduplication, and compression.
C. Provides direct access to VDP configuration integrated into the vSphere Client.
D. Reduces disk space consumed by virtual machine data using deduplication.
【单选题】
An administrator enables vSphere High Availability (HA) on an existing cluster with a large number of hosts and virtual machines. The administrator notices that the setup of vSphere HA on some of the hosts is failing. What step, if taken, might resolve this issue?___
A. Increase the value of the config.vpxd.das.electionWaitTimeSec setting.
B. Set the value of vpxd.das.aamMemoryLimit to 256.
C. Set the value of the das.useDefaultIsolationAddress setting to False.
D. Increase the value of the das.iostatsinterval setting.
【单选题】
An ESXi 6.x host consists of 24 logical cores. Hyperthreading is enabled on the host. What is the maximum number of vCPUs that can be assigned to a virtual machine on this host?___
【单选题】
By default, each ESXi 6.x host is provisioned with a certificate from which root certificate authority?___
A. RedHat Certificate Authority
B. VMware Certificate Authority
C. DigiCert Certificate Authority
D. Verisign Certificate Authority
【单选题】
An administrator is adding an NFS datastore as shown in the Exhibit. What is the purpose of the Servers to be added list?___
A. It contains the IP addresses of the NFS Storage Server to provide multipathing capability.
B. It contains the IP addresses of the ESXi hosts that mount the datastore.
C. It contains the IP addresses used for
D. ynamic Discovery of targets.
推荐试题
【单选题】
消防泵房应设置消防水泵启动信号、流程图、操作法,正常情况下消防水稳高压系统压力应保持在___Mpa。
A. 0.5~1.0
B. 0.5~1.2
C. 0.7~1.0
D. 0.7~1.2
【单选题】
___实测一次消防水系统的实际流量、压力,并做好测试记录。
【单选题】
灭火器材___检查一次,除在检查卡上标注并签名外,还应记录在消防设施检查台帐上。
A. 每周
B. 每月
C. 每季度
D. 每半年
【单选题】
关于灭火器,下列说法错误的是:___
A. 灭火器避免放置在受到烈日曝晒或接近热源。
B. 灭火器避免放置在潮湿、受化学腐蚀物品影响的地点。
C. 检查压力表指针应在绿色区域,如指针在红色区域时应重新更换。
D. 二氧化碳灭火器至少每半年检查一次重量,如低于标明重量的80%时,应重新更换
【单选题】
地上式消火栓和室内消火栓应至少___检查一次。
【单选题】
下列说法错误的是___
A. 值班人员应按时做好运行工艺参数记录工作,做到齐全、准确、及时,并根据生产要求,完成相关数据的统计、依此进行生产工艺分析。
B. 值班人员应及时记录本班生产全部情况,生产中发现问题向调度汇报即可。
C. 值班人员负责按时汇总场站生产信息,填报生产报表,整理生产运行资料。
D. 值班人员必须坚守所在岗位,不得擅离职守。如确需离开,需经主管领导允许后,方能离开。
【单选题】
交接班时,接班人员提前___分钟进站由班长召开班前会,进行班前检查,熟悉生产情况。
【单选题】
关于交接班下列说法错误的是:___
A. 由交接班员工双方按巡回检查路线逐点、逐项交接,对重要生产情况、生产流程等进行重点交接。
B. 交接班员工巡回检查时要做到五到:走到、看到、听到、摸到、闻到。
C. 交接班员工巡回检查时,发现问题要及时处理,不能处理的,要及时向上级汇报,同时填报上报问题记录表。
D. 交接过程中发现的问题由接班人处理。
【单选题】
交接班时,对发现的问题,处理不了的应由___上报。
A. 交班人
B. 接班人
C. 值班班长
D. 值班站长
【单选题】
CNG加气站气瓶首次充装前,用户必须按使用说明书的要求对罐内气体进行处理和分析,采用抽真空处理时,真空度不得低于___mm汞柱。
A. 500
B. 550
C. 600
D. 650
【单选题】
CNG加气站气瓶首次充装前,用户必须按使用说明书的要求对罐内气体进行处理和分析,采用充氮置换处理时,罐内气体含氧量不得大于___%,并且处理单位必须出具证明文件后,方可进行充装。
【单选题】
CNG加气站槽车充装前气瓶剩余压力不得低于___Mpa。
A. 0.05
B. 0.02
C. 0.1
D. 0.5
【单选题】
关于CNG加气母站槽车工艺管理,下列说法错误的是___
A. 仪表(阀门、压力表等)、爆破片装置、安全阀应定期进行检定和维护保养,其中检定报告复印件需留存场站备案
B. 压力表应当选用符合相应国家标准或者行业标准要求的抗震压力表,表盘应清晰可见,刻度极限值应为设计压力的1.5倍至3倍,表盘直径不小于100mm,其精度不低于2.5级
C. 槽车上各个连接件应经常检查和紧固,以防松动和垫圈老化失效,保证设备的安全可靠性。
D. 充装前后槽车上所有子阀均由押运员进行操作,充装人员只负责充装前后槽车罐体总阀的操作。
【单选题】
正常生产期间,值班人员每___巡回检查一次,特殊情况下加密巡检次数。
A. 一小时
B. 两小时
C. 一天
D. 一周
【单选题】
按时对设备和输气工艺进行巡回检查,及时发现设备问题并处理,对于重大设备故障和设备隐患要及时上报___。
A. 值班站长
B. 调控中心
C. 生产运行部
D. 安全环保部
【单选题】
坚持___一次岗位练兵,书面回答与实际相结合,并做好练兵记录。
【单选题】
岗位练兵记录应及时归档保存,保存期为___年
【单选题】
调控中心调度至少每___进行一次对全线压力、温度、流量等数据的分析,以判断数据变化是否正常。通过数据分析确定全线运行状态是否正常和合理。
A. 半小时
B. 一小时
C. 两小时
D. 四小时
【单选题】
关于门卫岗位管理制度,下列说法错误的是:___
A. 坚守岗位、不得擅离职守,做到不脱岗、不睡岗、不串岗、不做与工作无关的事情,时刻掌握进出站的人员及值班室周围的情况。
B. 疏导出入车辆,清理门卫责任区无关人员和车辆,保证人员、车辆出入有序。
C. 爱护值班室内外设备、设施,发现问题,应及时上报。
D. 严格查验出入人员和车辆的证件,履行进站登记手续,无关人员和车辆只要登记方可进站。
【单选题】
关于防火、防爆十大禁令下列说法错误的是:___
A. 未办理“动火作业许可证”,经领导同意方可在生产区域内进行用火作业。
B. 严禁在生产区域内用黑色金属或易产生火花的工具敲打、撞击和作业。
C. 严禁未经批准的各种机动车辆进入生产区域、生产装置、易燃易爆区。
D. 严禁穿带铁钉的鞋进入生产区域及易燃、易爆装置。
【单选题】
生产信息日报由各站队的值班人员对班上的生产信息进行及时记录,并于每日___前交由输气站调度值班人员进行汇总。
A. 14点
B. 15点
C. 16点
D. 17点
【单选题】
即时汇报是指各站队在事件发生的___内进行报告,详细汇报事件发生的时间、状态、已经采取的措施,发生原因的初步判断等。
A. 10分钟
B. 30分钟
C. 一小时
D. 两小时
【单选题】
调度至少每___在线确认一次SCADA系统报警情况,发现问题及时处理。
A. 5分钟
B. 10分钟
C. 半小时
D. 一小时
【单选题】
调度至少每___进行一次监控画面浏览和分析,以判断画面中流程、设备和通讯状态是否正常,确定全线生产运行的安全
A. 一小时
B. 两小时
C. 12小时
D. 一天
【单选题】
CNG加气母站关于对用户人员管理说法错误的是:___
A. 司机及押运员进入场站需劳保着装,穿戴防静电服,佩戴安全帽。
B. 司机及押运员应在指定区域(司机休息室)进行休息,佩戴劳保用品方可进入充装区域。
C. 司机及押运员应保持休息区域环境卫生,严禁高声喧哗、赌博等。
D. 司机及押运员严禁将打火机、手机等火种和非防爆电子设备带入场站生产区。
【单选题】
五交五不接中五交是指:___
A. 交运行方式;交设备遗留问题;交设备、工具和仪表的运转情况和完好状态;交存在的问题和上级指示;交岗位卫生、岗位工具、用具和消防器材。
B. 交运行方式;交工艺运行参数、岗位资料;交设备遗留问题;交存在的问题和上级指示;交岗位卫生、岗位工具、用具和消防器材。
C. 交运行方式;交工艺运行参数、岗位资料;交设备、工具和仪表的运转情况和完好状态;交设备遗留问题;交岗位卫生、岗位工具、用具和消防器材。
D. 交运行方式;交工艺运行参数、岗位资料;交设备、工具和仪表的运转情况和完好状态;交存在的问题和上级指示;交岗位卫生、岗位工具、用具和消防器材。
【单选题】
消防水泵每天白班试运行一次不少于___分钟、每班盘车一次、定期润滑并做好记录。
【单选题】
用火期间,距用火点__米内严禁排放各类可燃气体,___米内严禁排放各类可燃液体。 ___
A. 10、30
B. 30、15
C. 30、20
D. 10、15
【单选题】
受限空间作业许可证最长不得超过___小时。
A. 8小时
B. 24小时
C. 36小时
D. 72小时
【单选题】
进入受限空间作业,氧含量在___ 时为合格。
A. 18%
B. 19%
C. 21%
D. 19.5%-23.5%
【单选题】
办理进入受限空间作业许可证需对受限空间内下列 ___气体的浓度进行化验分析。
A. 可燃气体
B. 氧气含量
C. 氮气浓度
D. 以上都是
【单选题】
办理进入受限空间作业许可证对受限空间内硫化氢气体的浓度分析,其作业环境中最高允许浓度为___
A. 10mg/m2
B. 15mg/m2
C. 20mg/m2
D. 25mg/m2
【单选题】
在受限空间内施救,在可燃、有毒气性质体不明的情况下,应首先选个体呼吸防护器材为___
A. 过滤式防毒面具
B. 正压式空气呼吸器
C. 自吸式防毒面具
D. 氧气包
【单选题】
在受限空间潮湿容、狭小金属容器内使用手持照明灯具时, 安全电压应小于等于___伏
【单选题】
与其他作业交叉进行时,应按指定的路线上下,不应___作业。
A. 上下垂直
B. 左右交叉
C. 上下交叉
D. 左右平行
【单选题】
雨天和雪天作业时,应采取可靠的防滑、防寒措施;遇有___以上强风、浓雾等恶劣气候,不应进行高处作业、露天攀登与悬空高处作业;暴风雪、台风、暴雨后,应对作业安全设施进行检查,发现问题立即处理。
【单选题】
Ⅳ级高处作业(30m以上)宜配备___工具。
A. 通讯联络
B. 紧急逃生
C. 速降绳索
D. 以上都是
【单选题】
吊装作业按照吊装重物质量m<40t为___吊装作业:
【单选题】
___以上的吊装作业,应编制吊装作业方案。吊装物体质量虽不足40t,但形状复杂、刚度小、长径比大、精密贵重,以及在作业条件特殊的情况下,也应编制吊装作业方案,吊装作业方案应经审批。