【单选题】
An administrator is installing Windows into a virtual machine. The DVD has been mounted on the Host and configured for the virtual machine as shown in the Exhibit. Based on the exhibit, when the virtual machine is booted, why would it attempt to search for a PXE server? ___
A. The CD/DVD device is not connected.
B. The ISO is in the incorrect storage location.
C. The OS minimum requirements have not been met.
D. The CD/DVD device is not set to Client Device.
查看试卷，进入试卷练习
微信扫一扫，开始刷题
相关试题
【单选题】
What component must be installed prior to deploying a vCenter Server in vSphere 6.x? ___
A. vCenter Identity Services
B. Platform Services Controller
C. vCenter Single Sign-On
D. Client Integration Plug-In
【单选题】
What is a valid plug-in status for a plug-in that has been added to a vSphere client? ___
A. Disabled
B. Unknown
C. Stopped
D. Installed
【单选题】
Users of an application are reporting performance issues. The following performance values are observed in the vSphere Web Client: <Host CPU utilization is 90%> <Virtual Machine memory utilization is consistently greater than 90% CPU Ready values are higher than 20%> What could be the cause of the application performance issue? ___
A. The host is lacking the CPU resources required to meet the demand.
B. The host is lacking the memory resources required to meet the demand.
C. The virtual machine is lacking the CPU resources required to meet the demand.
D. The virtual machine is lacking the memory resources required to meet the demand.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is re-provisioning an ESXi host and moving it to another datacenter. Which DCUI option should the administrator use to revert the system configuration to the default settings? ___
A. Reset System Configuration
B. Rebuild Default System Configuration
C. Revert System Configuration
D. Renew Default System Configuration
【单选题】
An administrator has just completed installing an ESXi 6.x host, but doesn't know what address has been configured. Where is the ESXi host IP address configured? ___
A. RVC console
B. Direct Console User Interface
C. vSphere Web Client
D. vSphere Client
【单选题】
When is it possible to place a VMFS5 datastore in maintenance mode? ___
A. When it is a member of a Storage DRS cluster
B. When it is a member of Virtual SAN cluster
C. When it is a member of a multi-extent datastore
D. When it is a member of a Virtual Volume
【单选题】
Immediately after installing ESXi, an administrator observes that the Configure Lockdown Mode option is grayed out in the Direct Console User Interface (DCUI). What is the most likely explanation? ___
A. The host has not yet been added to a vCenter Server.
B. The BIOS on the host does not have NX/XD enabled.
C. The ESXi host is running in evaluation mode.
D. The host requires a reboot before this feature is available.
【单选题】
Immediately after installing ESXi, an administrator observes that the Configure Lockdown Mode option is grayed out in the Direct Console User Interface (DCUI). What is the most likely explanation? ___
A. The host has not yet been added to a vCenter Server.
B. The BIOS on the host does not have NX/XD enabled.
C. The ESXi host is running in evaluation mode.
D. The host requires a reboot before this feature is available.
【单选题】
Which Single Sign-On deployment mode should an administrator use for two 6.x vCenter Servers configured with linked mode? ___
A. Basic Single Sign-On with vCenter Server Heartbeat
B. Multisite Single Sign-On
C. Basic Single Sign-On
D. Single Sign-On with Linked Mode
【单选题】
What is required when changing a virtual machine name using the vSphere Web Client? ___
A. Verify connectivity to the ESXi host where the virtual machine is running and its inventory list is accessible.
B. Verify in which datastore the virtual machine resides and that you have access and its inventory list is accessible.
C. Verify that virtual machine files are stored in the same datastore and can be accessed in the datastore browser list.
D. Verify the virtual machine is not running in Fault Tolerant mode and that it is not in a Distributed Resource Scheduler cluster.
【单选题】
An administrator deploys vRealize Operations into a vSphere 6.x environment. After the deployment, the administrator notices that badges are not appearing. What is a likely cause of this behavior? ___
A. Badges do not appear until you register vRealize Operations with vCenter Server.
B. Badges do not appear until you register a vCenter Server in vRealize Operations.
C. The vRealize Operations appliance needs to be redeployed.
D. The vCenter Server appliance needs to be redeployed.
【单选题】
How are ports scaled on vSphere Standard Switches (vSS)? ___
A. Ports on a vSS can be dynamically scaled up and down.
B. Ports on a vSS can only be statically scaled up or down.
C. Ports on a vSS can only be dynamically scaled down.
D. Ports on a vSS can only be dynamically scaled up.
【单选题】
A High Availability (HA) cluster is configured to respond to a given number of host failures. The cluster contains virtual machines configured with these settings: VM1 has a 1GHz CPU reservation and no Memory reservation VM2 has a 2GHz CPU reservation and no Memory reservation VM3 has no CPU reservation and no Memory reservation . Given this information, what is the correct slot size for the cluster? ___
A. The CPU Reservation should be set to 32MHz and the memory reservation should be set to 32MB plus memory overhead.
B. The CPU reservation should be set to 1 GHz and the memory reservation should be set to 0MB plus memory overhead.
C. The CPU reservation should be set to 2 GHz, and the memory reservation should be set to 0MB plus the virtual machine memory overhead.
D. The CPU reservation should be set to 2 GHz, and the memory reservation should be set to 32MB, plus the virtual machine memory overhead.
【单选题】
An administrator is planning a vSphere infrastructure with the following specific networking requirements: <The ability to shape inbound (RX) traffic> <Support for Private VLANs (PVLANs)> <Support for LLDP (Link Layer Discovery Protocol)>. What is the minimum vSphere Edition that will support these requirements? ___
A. vSphere Essentials Plus
B. vSphere Standard
C. vSphere Enterprise
D. vSphere
E. nterprise Plus
【单选题】
When you add an ESXi 6.x host to a new Cluster, which vSphere object owns the CPU and Memory resources of the hosts? ___
A. vCenter Server
B. Datacenter
C. Cluster
D. Host
【单选题】
A user is trying to retrieve objects from a SharePoint server and finds the request is taking an excessive amount of time. An administrator tries to isolate the issue and notes the following: Application performance is poor when compared to virtual machines on other hosts. Performance improves when the virtual machine is moved to another host. The virtual machine encounters higher than expected CPU %Ready times. What conclusion can be reached regarding the performance issues for this virtual machine? ___
A. Host Power Management is directly impacting virtual machine performance.
B. The virtual machine has a large number of snapshots.
C. The Path Selection Policy for the storage device is set differently on the affected host.
D. Network I/O control is configured for the portgroup.
【单选题】
A virtual machine template is accidently removed from the vCenter Server Inventory. Which method would be used to recover the template back into the environment?___
A. Use the datastore browser to locate the template, then right click and add the .vmtx file to inventory.
B. Use the datastore browser to locate the template, then right click and add the .vmx file to inventory.
C. Using the Managed Object Browser and adding the template from the ManagedObjectReference:GuestFileManager object.
D. Using the Managed Object Browser and adding the template from the ManagedObjectReference:VirtualDiskManager object.
【单选题】
A vSphere administrator needs to backup a virtual machine that has a Microsoft SQL Server Database installed. Which solution allows for an application quiesce to occur during backup?___
A. VMware vCenter Converter
B. VMware vCenter Site Recovery Manager
C. VMware vSphere Replication
D. VMware vSphere Data Protection Advanced
【单选题】
An administrator is migrating a virtual machine from a Test cluster to a Production cluster. The two environments do not have any shared storage. What is the easiest way to accomplish this task? ___
A. Perform a Storage vMotion.
B. Perform a regular vMotion.
C. Perform a Virtual to Virtual migration.
D. Perform a backup and restore using VMware Data Protection.
【单选题】
An administrator must determine an appropriate backup solution, given these conditions: 50 of the virtual machines are in a resource pool named Finance. 50 of the virtual machines are in a resource pool named QA. Which solution allows an administrator the ability to backup 100 virtual machines? ___
A. Use Snapshot Manager on the vCenter Server to backup the virtual machines.
B. Use the VMware Consolidated Backup (vcb) tool on the ESXi Host to backup the virtual machines.
C. Use the VMware Data Recovery (VDR) Appliance on the vCenter Server to backup the virtual machines.
D. Use the VMware Data Protection (VDP) Appliance on one of the
E. SXi Hosts to backup the virtual machines.
【单选题】
What is a benefit of using Enhanced vMotion Compatibility for an environment? ___
A. EVC masks CPU features to allow compatibility between hosts that are dissimilar.
B. EVC allows for cross platform vMotion to occur.
C. EVC enables Long
D. istance vMotion.
【单选题】
How many Link Aggregation Groups (LAGs) can be configured on a vSphere 6.x Distributed Switch? ___
A. 64
B. 96
C. 128
D. 256
【单选题】
How many Link Aggregation Groups (LAGs) can be configured on a vSphere 6.x Distributed Switch? ___
A. 64
B. 96
C. 128
D. 256
【单选题】
An administrator needs to verify that vMotion operations can be performed in a vSphere data center.What round trip time (RTT) latency is the maximum value that will allow vMotion operations to succeed? ___
A. 50ms RTT
B. 100ms RTT
C. 150ms RTT
D. 200ms RTT
【单选题】
A storage administrator has reported that full utilization of all bandwidth from an ESXi 6.x host is not being seen. In troubleshooting the issue, the Adapter details are shown in the Exhibit. Based on the exhibit, what is cause of the issue? ___
A. The array is not setup to use the correct multipathing policy.
B. There are no virtual machines on the ESXi host.
C. Not all links are used because a path is disabled.
D. Another path needs to be configured.
【单选题】
An administrator is migrating a powered-on virtual machine, as shown in the exhibit. Which option should be selected to perform a Storage vMotion of the VM? ___
A. Change storage only
B. Change VM compute resource only
C. Change both compute resource and storage, changing the compute resource first.
D. Change both compute resource and storage, changing the storage resource first.
【单选题】
An administrator is attempting to enable Storage I/O Control on a datastore, but it is failing. What is the likely reason for this failure? ___
A. The host is connected to a datastore is running on ESX 4.0.
B. The host is connected to a Fibre Channel storage array.
C. The datastore has multiple extents.
D. The datastore is managed by a single vCenter Server.
【单选题】
A mission-critical virtual machine built on vSphere 4.1 needs to be moved to an ESXi 6.x host.Which virtual hardware version is needed to move the virtual machine without upgrading? ___
【单选题】
An administrator is analyzing a virtual machine as shown in the Exhibit. What is the current long term risk for this virtual machine? ___
A. The virtual machine may run out of memory before April 27.
B. The virtual machine may continue to function after April 27.
C. The virtual machine has adequate memory configured for operation for the next 120 days.
D. The virtual machine has adequate memory reservation configured for operation for the next 120 days.
【单选题】
An administrator is monitoring a High Availability (HA) and Distributed Resource Scheduler (DRS) enabled cluster and has noticed that virtual machines in the cluster are being migrated without user intervention. Why is this happening? ___
A. The DRS Automation level is set to Fully Automated.
B. The Automation level is set to Automatic.
C. The
D. PM Threshold is set to Aggressive.
【单选题】
An administrator attempts to migrate a suspended virtual machine to a newly deployed vSphere 6.x cluster. The compatibility check fails. What condition could cause this behavior?___
A. The new vSphere 6.x cluster is running Intel CPUs instead of AMD CPUs.
B. A suspended virtual machine cannot be migrated.
C. The hardware virtualization feature of the CPU is not enabled on the new hosts.
D. A vSphere Distributed Switch is required to migrate a suspended virtual machine.
【单选题】
A vSphere administrator has been using vSphere in evaluation mode and now wants to deploy an environment that provides the same features. Which edition of vSphere provides similar functionality to evaluation mode? ___
A. Enterprise Plus
B. Enterprise
C. Standard
D. Essentials
【单选题】
A vSphere administrator has been using vSphere in evaluation mode and now wants to deploy an environment that provides the same features. Which edition of vSphere provides similar functionality to evaluation mode? ___
A. Enterprise Plus
B. Enterprise
C. Standard
D. Essentials
【单选题】
An administrator has just configured the IP address on an ESXi host from the Direct Console User Interface. How can the configuration be validated as correct without any additional tools?___
A. Add the host to vCenter Server and if it works, then all networking settings are ok.
B. Select the Test Management Network option from the DCUI.
C. Connect to the host with the vSphere Client and click the Test Network option.
D. Use PowerCLI to connect to the host and initiate a network test.
【单选题】
An administrator is installing vCenter Server for an environment that has 40 ESXi 6.x Hosts and 150 virtual machines. Which database would meet the minimal requirements needed for this task? ___
A. vFabric Postgres
B. Microsoft SQL Express 2008
C. Microsoft SQL Server 2014
D. Oracle 11g
【单选题】
What is a requirement when enabling a Virtual SAN cluster in an existing High Availability (HA) and Distributed Resource Scheduler (DRS) Cluster? ___
A. Disable DRS and HA before enabling Virtual SAN
B. Enable DRS before enabling Virtual SAN
C. Disable HA before enabling Virtual SAN
D. Enable Storage DRS before enabling Virtual SAN
【单选题】
The vSphere administrator attempts to connect to an ESXi host via an SSH client and receives the following security alert: The vSphere administrator needs to determine whether the RSA key fingerprint shown in the security alert is the fingerprint of the intended ESXi host. Which tool should the vSphere administrator use? ___
A. Direct Console User Interface
B. vSphere Client
C. vSphere Web Client
D. vSphere Management Assistant
【单选题】
An administrator needs to monitor traffic on vSwitches in a vSphere 6.x environment. Which option, if configured, would accomplish this task? ___
A. Forged Transmits
B. MAC Address Changes
C. Promiscuous Mode
D. Notify Switches
【单选题】
What is true regarding datastores on ESXi 6.x? ___
A. NFS 4.1 datastore does not support Fault Tolerance (FT)
B. VMFS3 and VMFS5 datastores can be newly created
C. NFS datastore can be concurrently mounted using NFS 4.1 on one host and NFS on another
D. NFS 3.0 datastore does not support Fault Tolerance (FT)
推荐试题
【单选题】
厕所系统由谁监控?___
A. 冲洗控制组件自检；
B. CFDS；
C. VSC自检。
D.
【单选题】
当高度压力开关故障时，真空泵是否可以工作？___
A. 可以；
B. 不可以；
C. 起落架替代高度压力开关。
D.
【单选题】
废水量在何处显示?___
A. 厕所服务面板；
B. 前服务员面板；
C. A和B。
D.
【单选题】
废水排泄系统排放什么地方的水?___
A. 污水槽和洗手池
B. 污水槽
C. 洗手池
D.
【单选题】
废水排泄系统为什么安装污水排放valve?___
A. 使污水槽和洗手池被隔开；
B. 防止损失客舱压力；
C. 阻止洗手池被隔离。
D.
【单选题】
加水的最大允许压力是多少？___
A. 25psi；
B. 50psi；
C. 75psi。
D.
【单选题】
前服务员面板可以显示什么？___
A. 饮用水量和污水量；
B. 饮用水量；
C. 污水量。
D.
【单选题】
什么时候可以加水？___
A. 飞机通电时；
B. 飞机无电时；
C. A、B均可。
D.
【单选题】
水valve和冲洗valve由谁监控?___
A. 真空系统控制器；
B. 真空泵；
C. 相应冲洗控制组件自检。
D.
【单选题】
水箱加水时用___
A. 一个手柄，一个加水valve；
B. 一个手柄，两个valve；
C. 二个手柄，两个valve。
D.
【单选题】
饮用水系统的主排放口在___
A. 饮用水服务面板；
B. 前放水面板；
C. 溢水放水面板。
D.
【单选题】
饮用水箱为什么增压?___
A. 易放水；
B. 给水加温；
C. 使水进行分配。
D.
【单选题】
真空泵何时工作?___
A. 在地面；
B. 爬升时上升到16000英尺以上和下降时下降到12000英尺下；
C. 在服务过程中。
D.
【单选题】
真空泵系统控制器的功用是：___
A. 进行系统控制、监控、故障报告；
B. 进行系统控制、监控；
C. 故障报告。
D.
【单选题】
VACUUMGENERATOR的工作条件___
A. 在地面或空中低于16000英尺
B. 仅在地面
C. 仅在空中低于16000英尺
D. 飞机高度高于16000FT
【单选题】
关于饮用水箱的增压源不正确是___
A. APU引气
B. 发动机引气
C. 地面气源
D. 专用压气机
【单选题】
下列说法不正确的是？___
A. 真空泵是离心式的
B. 废水箱底部的液面传感器是静压式
C. 废水箱顶部的液面传感器是超声波式
D. 马桶座杯由钛合金制成，内侧涂覆不粘涂层
【单选题】
飞机在地面时按压厕所冲水电门，真空泵却没有工作___
A. 真空泵故障
B. 污水勤务面板打开
C. 污水箱已满
D. 以上皆有可能
【单选题】
哪个部件控制真空马桶冲水循环___
A. 冲水电门
B. FCU
C. VSC
D. FAP
【单选题】
污水系统的真空马达何时工作：___
A. 飞机通电即工作
B. 冲水电门按下
C. 高度电门闭合
D. B和C
【单选题】
真空马桶系统由何监控___
A. FCU自检
B. CFDS
C. VSC自检
D. AIDS
【单选题】
污水排放系统中的排放valve的描述正确的是：___
A. 允许隔离排水槽和洗手盆
B. 防止客舱增压空气持续泄漏
C. 防止洗手盆被隔离
D. MEL放行时使用
【单选题】
巡航时按压厕所冲水电门，真空泵却没有工作___
A. 真空泵故障
B. 另一个厕所刚刚按压了冲水电门
C. 高度电门断开
D. 以上皆有可能
【单选题】
厨房水槽和厕所洗手池污水排放valve的功用（）___
A. 隔离厨房水槽和厕所洗手池系统
B. 防止客舱增压空气过多流失
C. 防止异物堵塞管道
D. 放反流
【单选题】
当按压冲洗电门时，真空马达（）___
A. 在空中不工作
B. 在地面或在低高度，高度电门闭合时工作
C. 直接通电，使真空马达工作
D. 给乘务员信号，由乘务员控制真空马达的工作
【单选题】
列描述正确的是（）___
A. 厕所勤务面板打开时，真空马达不工作
B. 当Wasteholdingtank满了以后，真空厕所系统不工作
C. VSV控制和监控厕所系统的工作
D. 以上都正确
【单选题】
水valve和冲洗valve是由哪个监控的（）___
A. VSV
B. FCU
C. CFDS
D. 没有控制器对其进行监控
【单选题】
外接电源可用的情况下，用加水勤务车给飞机水箱加水，当水箱被加满后（）___
A. 溢流valve自动关闭
B. 加水/放水valve自动关闭
C. 溢流valve和加水/放水valve仍在开位，必须通过人工关断
D. 多余的水会通过排放valve排除机外
【单选题】
以下说法正确的是（）___
A. 厕所和厨房用水都来自饮用水箱
B. 厨房用水来自饮用水箱，厕所用水来自污水箱
C. 厕所洗手池用水来自饮用水箱，便池充洗用水来自污水箱
D. 真空厕所不需用水冲洗
【单选题】
饮用水水系统的排放valve（）___
A. 前后排放valve都只能机械控制打开
B. 前排放valve可以电控操作打开
C. 前后、排放valve都只能电控操作打开
D. 后排放valve可电控操作打开
【单选题】
饮用水系统的排放口位置（）___
A. 后饮用水勤务面板
B. 前饮用水排放面板
C. A和B
D. 厕所勤务面板
【单选题】
饮用水箱的描述（）___
A. 不需增压
B. 只能以飞机引气系统的增压
C. 飞机在地面只能以地面增压接头增压
D. 飞机在地面，可以从飞机引气系统或从地面增压接头增压
【单选题】
在什么地面可以检查到水箱的水量（）___
A. 只能在水勤务面板
B. 只能在FAP
C. 既可在水勤务面板，也可在FAP
D. 在ECAM水勤务面板和FAP
【单选题】
319飞机卫生间水龙头的热水是如何得到？___
A. 通过位于水箱附近的加热器
B. 通过位于水龙头下部的一个人工控制的加热恒温器实现的
C. 通过位于水龙头下部的一个自动控制的加热恒温器
D.
【单选题】
在污水排放系统中，共有几个放泄桅杆，几个具有电加热功能？___
【单选题】
在污水排放系统中，排放valve的作用是什么？___
A. 可使卫生间洗手盆、厨房水池隔离
B. 防止洗手盆隔离
C. 防止客舱释压
D.
【单选题】
当高度压力电门失效后，真空马达使用什么信号作为控制的备用信号？___
A. 起落架信号
B. FCU使用内部一缺省的信号
C. 默认断开情况
D.
【单选题】
在地面，真空马达工作条件是什么？___
A. 只要飞机通电
B. 只要高度电门闭合
C. 当高度压力电门闭合，按下冲洗按钮后
D.
【单选题】
马桶勤务面板的安装位置：___
A. 在机头左侧
B. 在机尾左侧
C. 在机尾右侧
D.
