刷题
导入试题
【判断题】
电源供给异常会导致电磁离合器烧坏
A. 对
B. 错
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
B
解析
暂无解析
相关试题
【判断题】
轴承预紧的目的是提高轴承支承的刚度,提高轴的旋转精度,降低轴的震动和噪声,降低轴之间的摩擦
A. 对
B. 错
【判断题】
经纬仪光学对中误差一般应小于1mm
A. 对
B. 错
【判断题】
转子材质的不均匀将会影响高速机械转子精度
A. 对
B. 错
【判断题】
镦粗加工工艺最好用于塑性好,延展性大的金属材料台阶轴或双联齿轮等毛坯件加工
A. 对
B. 错
【判断题】
为了保证大型设备基础的承载能力,一般采用钢筋温凝土整体浇灌的结构
A. 对
B. 错
【判断题】
多段床身接合面刮削时,将被刮的接合面端用枕木垫高的目的是便于刮研
A. 对
B. 错
【判断题】
更换清单,由主管工艺人员提出,由备件人员核定出价格,更换件包括机械,电器,液(气)压的备配件和外购件
A. 对
B. 错
【判断题】
任何提高劳动生产率的措施,都必须以经济效益为前提
A. 对
B. 错
【判断题】
精密机床导轨在的粗糙度要求是:每25mm×25mm在16~20点
A. 对
B. 错
【判断题】
工作台要牢固平稳,平台周围要保持整洁,通行要方便,1米内禁止堆放物件
A. 对
B. 错
【判断题】
两孔轴线相交成 90°角,一个孔直径为φ20mm,另一个孔直径是φ30mm,应该先钻穿直径大的孔
A. 对
B. 错
【判断题】
碳素工具钢和合金工具钢用于制造中、低速成型刀具
A. 对
B. 错
【判断题】
经纬仪整平时,经反复调整,直到仪器转到任意位置时,水准气泡最大偏离值小于二分之一格为止
A. 对
B. 错
【判断题】
刮削大型机床导轨面时,应在将导轨面上的零件全部拆除后进行,以保证刮削质量
A. 对
B. 错
【判断题】
要安排好培训计划,做好上课的准备工作,做到有组织,有计划地进行培训,做到定时间,定地点,定内容,定进度,定要求,有练习,有考核
A. 对
B. 错
【判断题】
轨道制作主要是轨道调直和接头,调直后对轨道进行编号,两条轨道上从端部或伸缩缝处算起,轨道接头至少要对齐,以使运转平稳
A. 对
B. 错
【判断题】
为实现电动机连续正转运行需采用具有接触器自锁的控制线路和手动正转控制回路
A. 对
B. 错
【判断题】
在修理带传动机构时,发现带轮孔超差额0.08mm,造成配合过松,一般可用镀铬法来加大轴颈尺寸
A. 对
B. 错
【判断题】
用经纬仪和平行光管测量机床转台分度误差时,应用专用心轴配装在转台中心孔中将经纬仪和心轴紧固联接在一起
A. 对
B. 错
【判断题】
采用双螺母螺纹式调整滚珠丝杠轴向间隙的方法结构紧凑,调整方便,应用广泛
A. 对
B. 错
【判断题】
若自准直仪上读数鼓轮每格角值分度值为1",则其线值分度值可用0.05mm/m表示
A. 对
B. 错
【判断题】
所有的紫色酒精,在 1 米内不准点有明火,不准放在暖气片上
A. 对
B. 错
【判断题】
固定式装配适用于单件和小批量模具的装配,以及装配精度要求较高,需要调整的部位较多的装配
A. 对
B. 错
【判断题】
我国对企业发生的事故,坚持“四不放过”原则进行处理
A. 对
B. 错
【判断题】
齿轮的齿侧间隙分为12 个等级
A. 对
B. 错
【判断题】
在机械设备中,凸轮表面误差将会引起扭转振动
A. 对
B. 错
【单选题】
What happens to the status of users already logged into ESXi Shell when a vSphere administrator enables lockdown mode?___
A. Users remain logged in and can run commands, except to disable lockdown mode.
B. Users remain logged in and can run commands, including disabling lockdown mode.
C. Users are immediately logged out of ESXi Shell.
D. Users are logged out after a timeout specified by the vSphere administrator.
【单选题】
What is the effective vSphere licensing level during the 60 day evaluation period?___
A. vSphere Foundation Essentials Plus
B. vSphere Standard
C. vSphere Enterprise
D. vSphere
E. nterprise Plus
【单选题】
To comply with security requirements, an administrator with a vCenter Server Appliance needs to force logoff of the vSphere web client after 10 minutes of inactivity.What should the administrator do to meet the requirement?___
A. Edit: /var/lib/vmware/vsphere-client/webclient.properties, modify session.timeout=10
B. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=600
C. Edit: /var/lib/vmware/vsphere-client/webclient.properties modify session.timeout=600
D. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=10
【单选题】
An administrator enables High Availability (HA) on a Virtual SAN cluster.Which network is used for HA Network Heatbeat configuration?___
A. The Management network.
B. The vMotion network.
C. The Virtual SAN network.
D. The Provisioning Traffic network.
【单选题】
A user wants to monitor a business-critical virtual machine to ensure that it doesn't run out of resources. What metric could be monitored in vRealize Operations to address this concern?___
A. Time Remaining badge
B. Compliance badge
C. Reclaimable Waste badge
D. Density badge
【单选题】
An administrator has recently installed a new ESXi 6.x Host, and during the configuration notices sporadic network problems. To check whether the issue occurred sometime during the configuration, the administrator would like to reset the system.How can this be accomplished in the shortest amount of time?___
A. Run the ESXi installer again and reinstall the host.
B. Select the Reset System Configuration option from the vSphere Client when connected directly to the host.
C. From the
D. irect Console User Interface, select Reset System Configuration.
【单选题】
A vApp is running out of compute resources when overall activity is high within the resource pool. At other times, everything is fine.What should be done to resolve this issue?___
A. Increase the size of the resource pool Shares.
B. Set the vApp's CPU and Memory Reservation Type to Expandable.
C. Set the vApp's CPU and Memory Limit to Unlimited.
D. Create a new resource pool with the existing hardware configuration.
【单选题】
A virtual machine has been renamed and an administrator is unable to find files with the new virtual machine name in the datastore.What is the reason for this?___
A. The names of the files on the datastore do not change.
B. The names of the files on the datastore have been corrupted.
C. The virtual machine needs to be re-added to the inventory.
D. The Distributed Resource Scheduler moved the virtual machine to another host.
【单选题】
An administrator has configured network connectivity for a new virtual machine, as shown in the Exhibit.What will occur with the network traffic of this virtual machine when communicating externally from vSwitch1?___
A. The virtual machine will communicate on both uplinks
B. The virtual machine will only communicate on vmnic1
C. The virtual machine will only communicate on vmnic2
D. The virtual machine will fail to communicate externally
【单选题】
An administrator is unable to create the first group in a new vRealize Operations environment. What is the likely cause of the problem?___
A. There are no group types defined.
B. The group is not defined in SSO.
C. There are more than 32 group types defined.
D. The description for the group is not provided.
【单选题】
A new vApp was built and tested in the corporate headquarters datacenter running vSphere 6.x. What condition would explain why the virtual machine is failing to boot in an offsite datacenter running on vSphere 5.5?___
A. The virtual machine was built with the default hardware version.
B. The VMFS 5 datastore is not compatible with virtual machines configured with vSphere 6.x.
C. a
D. RS 5.5 cluster cannot run virtual machines configured with vSphere 6.x.
【单选题】
An administrator is evaluating whether to deploy vCenter Server on a Windows server or on a vCenter Server appliance. The administrator has the following requirements: <A web browser will be utilized to manage the vSphere environment.> <16 ESXi hosts will be deployed.> <Licenses must be shared with a vCenter Server at another site.> <An external Oracle 10g database server will be used to host the vCenter Server database.> Why will the administrator need to deploy vCenter Server on a Windows server?___
A. Linked Mode is a requirement for the solution.
B. Oracle 10g is a requirement for the solution.
C. The vSphere web client is a requirement for the solution.
D. Management of more than 5 hosts is a requirement for the solution.
【单选题】
What is a benefit of using VMware Data Protection ?___
A. Provides support for guest-level backups and restores of Microsoft SQL Servers, Exchange Servers, and Share Point Servers.
B. Provides support for advanced storage services including replication, encryption, deduplication, and compression.
C. Provides direct access to VDP configuration integrated into the vSphere Client.
D. Reduces disk space consumed by virtual machine data using deduplication.
【单选题】
An administrator enables vSphere High Availability (HA) on an existing cluster with a large number of hosts and virtual machines. The administrator notices that the setup of vSphere HA on some of the hosts is failing. What step, if taken, might resolve this issue?___
A. Increase the value of the config.vpxd.das.electionWaitTimeSec setting.
B. Set the value of vpxd.das.aamMemoryLimit to 256.
C. Set the value of the das.useDefaultIsolationAddress setting to False.
D. Increase the value of the das.iostatsinterval setting.
推荐试题
【判断题】
电气设备检修时,工作票的有效期限以(批准的检修期限)为限。
A. 对
B. 错
【判断题】
配电装置中,电气设备的网状遮拦高度不低于( 1.7 ) m,底部离地不应超过 0.1m。
A. 对
B. 错
【判断题】
新敷设的带中间接头的电缆线路,在投入运行(三个月)后,应进行预防性试验。
A. 对
B. 错
【判断题】
用摇表测量电气设备绝缘时,“线路”( L)接线柱应接在(电机绕组或导体)。
A. 对
B. 错
【判断题】
在 10kV 系统中,氧化锌避雷器较多并联在真空开关上,以便限制(截流过电压)。
A. 对
B. 错
【判断题】
电力网按其在电力系统中的作用不同分为输电网和(配电网)。
A. 对
B. 错
【判断题】
负荷开关与(熔断器)配合 , 可保护电力线路。
A. 对
B. 错
【判断题】
电磁操动机构是利用(电磁功)产生的机械操作力矩使开关完成合闸的。
A. 对
B. 错
【判断题】
移动式电气设备的电源线应采用(橡皮绝缘)类型软电缆。
A. 对
B. 错
【判断题】
人体触电时,电流灼伤和电弧烧伤是由于电流的(热量)效应造成的。
A. 对
B. 错
【判断题】
运行中的电压互感器相当于一个(空载运行)的变压器。
A. 对
B. 错
【判断题】
高压电气设备停电检修时,防止检修人员走错位,误入带电间隔及过分接近带电部分 , 一般采用(遮拦)进行防护。
A. 对
B. 错
【判断题】
电气设备由事故转为检修时,应(填写工作票)。
A. 对
B. 错
【判断题】
对于 10kV 电容器的电流速断保护 , 动作时间为( 0)秒。
A. 对
B. 错
【判断题】
跌落式熔断器在短路电流通过后 , 装在管子内的熔体快速(熔断)断开一次系统。
A. 对
B. 错
【判断题】
两只额定电压相同的电阻 , 串联接在电路中 , 其阻值较大的电阻发热(较大)。
A. 对
B. 错
【判断题】
倒闸操作应由二人进行 , 一人唱票与监护 , 另一人(复诵与操作)。
A. 对
B. 错
【判断题】
高压配电线路的电压等级在( 110) kV 及以上。
A. 对
B. 错
【判断题】
电缆终端头,根据现场运行情况每( 1 至 3 年)停电检修一次。
A. 对
B. 错
【判断题】
(兆欧表)仪表属于直读式仪表。
A. 对
B. 错
【判断题】
雷电过电压又称为(外部)过电压。
A. 对
B. 错
【判断题】
35kV 及以上用户受电端电压的波动幅度不应超过额定电压的(± 5%)。
A. 对
B. 错
【判断题】
低压照明用户受电端电压的波动幅度不应超过额定电压的(±( 5%至 10%))。
A. 对
B. 错
【判断题】
在操作隔离开关时 , 发生带负荷误合隔离开关时 , 已经发生弧光即应(宁错不返 , 一合到底)。
A. 对
B. 错
【判断题】
带有储能装置的操作机构在有危及人身和设备安全的紧急情况下可采取紧急措施进行(分闸)。
A. 对
B. 错
【判断题】
用电烙铁焊接时 , 但焊头因氧化而不吃锡时 , 不可(硬烧)。
A. 对
B. 错
【判断题】
我国规定的安全电压额定值等级为( 42V、36V、24V、12V 和 6V)。
A. 对
B. 错
【判断题】
电气设备的绝缘是一个重要的技术指标 , 是安全检查的重要内容 , 电气绝缘检查主要是检查绝缘是否老化破损, 受潮和(绝缘电阻)等。
A. 对
B. 错
【判断题】
按照能量守恒定律,变压器绕组电压高的一侧,电流(小)。
A. 对
B. 错
【判断题】
填写工作票时要字体规范,字迹清楚不得涂改和不得用(铅)笔填写。
A. 对
B. 错
【判断题】
二次回路交流耐压试验电压为 1000V。当回路绝缘电阻值在 10 兆欧以上时,可采用( 2500) V 摇表代替, 试验持续时间为 1min
A. 对
B. 错
【判断题】
用数字万用表的直流电压档测量直流电压时极性接反,则(测出的电压值需取反才是真正电压值)
A. 对
B. 错
【判断题】
万用表测量电阻时,如果被测电阻未接入,则指针指示(∞位)
A. 对
B. 错
【判断题】
操作票填写中,合上或拉开的隔离开关、刀开关统称为(刀闸)
A. 对
B. 错
【判断题】
改变变压器分接开关的位置时,应来回多操作几次, 目的是保证(分接开关接触良好)
A. 对
B. 错
【判断题】
变压器吸潮器内的硅胶吸潮后变为(淡红色)
A. 对
B. 错
【判断题】
运行中的电压互感器相当于一个(空载运行)的变压器
A. 对
B. 错
【判断题】
110kV 及以上的供电系统的接地方式一般采用(大电流)接地方式
A. 对
B. 错
【判断题】
消弧线圈对接地电容电流采用全补偿会引起(串联谐振过电压)
A. 对
B. 错
【判断题】
对于 10kV 的变电所,要求电压互感器组采用( V,V)接线
A. 对
B. 错
欢迎使用我爱刷题
×
微信搜索我爱刷题小程序
温馨提示
×
请在电脑上登陆“www.woaishuati.com”使用