【多选题】
An administrator is configuring the Failover Order option on a vSphere Distributed Switch. Which two options should be used with IP-hash load balancing? (Choose two.)___
A. Active Uplinks
B. Standby Uplinks
C. Unused Uplinks
D. Override Failover Order
查看试卷,进入试卷练习
微信扫一扫,开始刷题
相关试题
【多选题】
An administrator is configuring the Maximum Transmission Unit value on a vSphere Distributed Switch. Which two options are typical values for ESXi networking? (Choose two.)___
A. 1492
B. 1500
C. 9000
D. 9089
【多选题】
Which two configurable options apply to both virtual machine CPU and memory allocation? (Choose two.)___
A. Reservation
B. Shares
C. Resource Pool
D. Reserve All
【多选题】
When attempting to power on a Virtual Machine you observe the following error: <Cannot open the disk '/vmfs/volumes/volume/vm/vm-000002.vmdk' or one of the snapshot disks it depends on.> Which three actions will be the best solutions to address this problem? (Choose three.)___
A. Verify that the virtual machine's disk files are present.
B. Investigate the host and virtual machine log files.
C. Verify the vmdk descriptor files and if required, recreate them.
D. Delete the disk file preventing the power on operation.
E. Migrate or register the virtual machine to a different host.
【多选题】
An administrator has been tasked with enabling High Availability ___ on a cluster in a vSphere 6.x environment with default settings. The cluster configures properly and there are no errors. The next day when powering on a virtual machine, an error is presented: <Not Enough Failover Resources>. Which three scenarios are likely causes of this error message? (Choose three.)(CDE)
A. The default VM Monitoring Sensitivity is set too high.
B. There are not enough datastore heartbeat datastores configured by default.
C. The default slot size in the cluster is set too high.
D. There are virtual machines with large CPU reservations.
E. A host is in maintenance mode for a replacement of a failed Hard Drive.
【多选题】
vMotion can be performed between which three physical boundaries? (Choose three.)___
A. Between two vCenter Server Systems
B. Between two vSphere Distributed Virtual Switches
C. Between two vCenter Server Datacenter objects
D. Between two VMware NSX Layer 4 segments
E. Between two NFS datastores
【多选题】
An administrator configures vSphere Replication for a virtual machine and enables multiple point in time (PIT) instances under the recovery settings in the Configure Replication wizard. Which two statements are correct for vSphere Replication with multiple point in time instances enabled? (Choose two.)___
A. vSphere Replication retains a number of snapshot instances of the virtual machine on the target site based on the retention policy that you specify.
B. vSphere Replication uses the virtual machine's snapshot instances to define the target site Point in Time instance based on the retention policy that you specify.
C. vSphere Replication does not support virtual machines with snapshots.
D. vSphere Replication supports virtual machines with snapshots.
【多选题】
An administrator is virtualizing a physical application server and adding it to an existing multi-tiered vApp. The application license is currently tied to the physical NIC's MAC address, so the administrator needs to ensure the license will function properly in the virtual machine. Which two actions can the administrator take to satisfy this task? (Choose two.)___
A. Set the MAC address for the vNIC in the guest operating system.
B. Install the physical server's NIC into the ESXi host.
C. Configure the MAC address for the vNIC using the vSphere Web Client.
D. Assign the physical server NIC's MAC address in the vSphere Distributed Switch.
【多选题】
Which two Fibre Channel zoning options are supported with vSphere 6.x? (Choose two.)___
A. Single-Initiator
B. Single-Initiator-Single-Target
C. Multiple-Initiators-Single-Target
D. Multiple-Initiators-Multiple-Targets
【多选题】
An administrator is attempting to remove an ESXi 6.x host from a vSphere Distributed Switch (vDS). When the administrator attempts to remove the host, the following error is observed: <The resource '16' is still in use.> What three steps are needed to successfully remove the host from the switch? (Choose three.)___
A. Select Manage Ports on the vDS for the host.
B. Locate all ports currently in use on the vDS for the host.
C. Migrate or delete any vmkernel or virtual machine adapters associated with the switch.
D. Remove all network cards from the switch before trying to remove the host.
E. Create a standard switch for everything to be automatically be migrated to.
【多选题】
Which two Virtual SAN related actions might start resynchronization of virtual machine objects? (Choose two.)___
A. Editing a virtual machine storage policy to increase the number of replicas.
B. Editing a virtual machine storage policy to reduce the number of replicas.
C. Editing a virtual machine storage policy to increase the number of disk stripes.
D. Editing a virtual machine storage policy to reduce the number of disk stripes.
【多选题】
An administrator is troubleshooting basic network connectivity issues. Which two scenarios are potential issues that this administrator might face? (Choose two.)___
A. The vSwitch is not attached to the correct physical network.
B. The portgroup is not configured to use correct VLAN.
C. Traffic shaping is configured incorrectly.
D. Jumbo frames is configured incorrectly.
【多选题】
Which three items should be validated prior to installing ESXi 6.x? (Choose three.)___
A. Remote Storage has been disconnected.
B. Installation media is available.
C. Server hardware clock is set to UTC.
D. Storage has been partitioned with a VMFS volume.
E. Network cards have been setup to use Jumbo
F. rames.
【多选题】
An administrator is performing an interactive installation of ESXi 6.x. Which three options are available for installation? (Choose three.)___
A. DVD
B. USB
C. PXE
D. Scripted
E. Auto Deploy
【多选题】
After installation of a host in your test environment, you need to move it to production. The only major change that needs to be made is that the hostname of the server needs to change. What are two ways that an administrator can change the host name without editing configuration files on the host directly? (Choose two.)___
A. Login to the Direct Console User Interface and change it from here.
B. Edit the Default TCP/IP Configuration from the vSphere Web Client.
C. Use the Ruby vSphere Client to send a script to the ESXi host that updates the hostname.
D. Update the information in DNS and the
E. SXi host will automatically update with these changes.
【多选题】
An administrator has unsuccessfully attempted several times to install an Operating System inside a virtual machine. The administrator finds that the installation fails at random intervals. Which two actions can be taken to resolve this issue? (Choose two.)___
A. Verify the md5sum and if invalid, download the installation files again.
B. Attempt the installation an additional time.
C. Attempt to use a different installation media or installation method.
D. Create a new virtual machine and attempt the installation with the existing media.
【多选题】
VMware tools is failing to install on a Microsoft Windows virtual machine. What are two possible situations that would prevent the installation? (Choose two.)___
A. The VMware tools installation media is corrupt.
B. The incorrect Operating System was selected in the virtual machine options.
C. The software prerequisites have not been installed.
D. The prerequisite services have not been started.
【多选题】
As part of a multisite Single Sign-On (SSO) deployment what two steps are required to ensure that a change to one Single Sign-On instance is propagated to the other instances? (Choose two.)___
A. Schedule a Replication Task on the primary instance
B. Select the first instance during the installation of subsequent instances
C. During the installation of each instance choose Linked-Mode
D. Enable Synchronize to Active Directory on each instance
【多选题】
You need to add an object to an existing vApp using the vSphere Web Client. How is this accomplished?___
A. Create an Object Inside the vApp.
B. Add an Object to a vApp.
C. Add an Object to the
D. atastore the vApp is located in.
【多选题】
Which three steps must be taken to use vSphere Update Manager 6.x to upgrade an ESXi 5.5 host to vSphere 6.x? (Choose three.)___
A. Download an ESXi Image.
B. Configure the vSphere Update Manager Download Service.
C. Create a baseline and attach it to the ESXi Host.
D. Scan the vCenter Content Library for the
E. SXi Image.
【多选题】
Which two options would allow a database administrator, with no access to the vSphere infrastructure, to connect to a virtual machine? (Choose two.)___
A. Use the Virtual Machine Remote Console (VMRC).
B. Use Remote Desktop Protocol (RDP) to connect.
C. Ask the vSphere administrator to grant permission to access the console through vCenter Server.
D. Ask the vSphere administrator to grant permission to access with the Horizon View Direct Connect Client.
【多选题】
Which three are architecture components of vRealize Operations? (Choose three.)___
A. Identity Server
B. Administrative Server
C. Analytics Server
D. Database Server
E. Connection Broker
【单选题】
金克拉金克拉撒旦蒂萨里大儿童家爱丽丝打开就撒开绿灯技术的()
A. 手动阀手动阀
B. 撒旦
C. 反对法
D. 第三方
【单选题】
金克拉金克拉撒退热贴开绿灯技术的()
A. 是否
B. 阿斯顿
C. 撒旦
D. 感到反感
【单选题】
而非热舞法国会开绿灯技术的()
A. 撒的
B. 热个股分化
C. 返回
D. 而我认为
【单选题】
十大富豪不给发货返回返回返回()
A. dfdfgd
B. 梵蒂冈梵蒂冈
C. 广泛大概
D. 热
【多选题】
马克思主义哲学所讲的静止是指___
A. 运动的一种特殊形式
B. 绝对不动
C. 排斥运动
D. 事物处于量变状态
E. 事物在特定参考系中未发生位置变动
【多选题】
物质和运动的关系是___
A. 运动是物质的固有属性
B. 物质是运动的承担者
C. 运动是物质的存在方式
D. 运动不一定是物质的运动
E. 物质不一定都在运动
【多选题】
社会的物质性体现在___
A. 劳动是社会产生和存在的决定性因素
B. 在社会中不存在精神的现象和活动
C. 物质资料的产生是社会历史的前提
D. 全部社会生活在本质上是实践的
E. 社会生活中不存在物质关系以外的其他关系
【多选题】
意识的能动作用表现在___
A. 反映客观世界
B. 创造物质世界
C. 通过实践改造客观世界
D. 创造理论体系
E. 为自然界创造秩序
【多选题】
金克拉金克拉撒旦蒂萨里大儿童家爱丽丝打开就撒开绿灯技术的()
A. 手动阀手动阀
B. 撒旦
C. 反对法
D. 第三方
【多选题】
金克拉金克拉撒退热贴开绿灯技术的()
A. 是否
B. 阿斯顿
C. 撒旦
D. 感到反感
【多选题】
而非热舞法国会开绿灯技术的()
A. 撒的
B. 热个股分化
C. 返回
D. 而我认为
【多选题】
十大富豪不给发货返回返回返回()
A. dfdfgd
B. 梵蒂冈梵蒂冈
C. 广泛大概
D. 热
【判断题】
金克拉金克拉撒旦蒂萨里大儿童家爱丽丝打开就撒开绿灯技术的()
【填空题】
金克拉金克拉撒旦蒂萨里大儿童家爱丽丝打开就撒开绿灯技术的()
推荐试题
【单选题】
当___时,柴油发电机自启动。
A. 机组跳闸;
B. 保安A、B段母线均失压或欠压;
C. 保安电源高电压;
D. 保安电源进线过电流未动作。
【单选题】
当UPS整流器输出电压低于___、直流输入电压低于( A )、逆变器故障、旁路电源故障及冷却风机故障时,UPS均有报警信号。
A. 240V 210V;
B. 220V 220V;
C. 300V 220V;
D. 220V 220V。
【单选题】
柴油发电机组的控制起动、保护、测量、信号系统采用直流电压,断路器控制、操作及其信号采用机组自身提供的直流___电压。
A. 12V;
B. 24V;
C. 36V;
D. 220V。
【单选题】
柴油发电机组备用状态下其的控制方式在应在___位置。
A. 手动;
B. 2自动;
C. 就地;
D. 远方。
【单选题】
当发电机的定子线棒出水温差大于___在确认测温元件正常的情况下应停机处理。
A. 8℃;
B. 10℃;
C. 12℃;
D. 14℃。
【单选题】
在直流电路中,我们把电流流入电源的一端叫做电源的___。
A. 正极;
B. 负极;
C. 端电压;
D. 电势。
【单选题】
蓄电池是一种储能设备,它能把电能转变为___能。
A. 热;
B. 光;
C. 机械;
D. 化学。
【单选题】
把几组参数相同的蓄电池并联接入电路中,它们的___等于各个蓄电池输出电流之和。
A. 总电压;
B. 总电流;
C. 总电阻;
D. 无法计算。
【单选题】
浮充电运行的铅酸蓄电池,单只蓄电池电压应保持在___之间。
A. 1.15±0.05V;
B. 1.65±0.05V;
C. 2.25±0.02V;
D. 2.55±0.05V。
【单选题】
新安装或大修后的铅酸蓄电池进行放电容量试验的目的是为了确定其___。
A. 额定容量;
B. 实际容量;
C. 终止电压;
D. 放电电流。
【单选题】
直流负母线的颜色为___。
A. 黑色;
B. 绿色;
C. 蓝色;
D. 赭色。
【单选题】
在寻找直流系统接地时,应使用___。
A. 兆欧表;
B. 低内阻电压表;
C. 高内阻电压表;
D. 验电笔。
【单选题】
蓄电池充电结束后,连续通风___小时以上,室内方可进行明火作业。
A. 2;
B. 1;
C. 半;
D. 1.5。
【单选题】
当发电机的定子线棒出水温差大于___在确认测温元件正常的情况下应停机处理。
A. 8℃;
B. 10℃;
C. 12℃;
D. 14℃。
【单选题】
蓄电池浮充电运行,如果直流母线电压下降,超过许可范围时,则应___恢复电压。
A. 切断部分直流负载;
B. 增加蓄电池投入的个数;
C. 增加浮充电流;
D. 减小浮充电流。
【单选题】
鼠笼式电动机的启动次数应遵照制造厂规定执行,无规定时,一般允许在冷态下启动两次,每次间隔不少于___。
A. 1min;
B. 3min;
C. 5min;
D. 10min。
【单选题】
蓄电池温度上升,当环境温度在___以上时,对环境温度进行降温处置。
A. 20℃;
B. 30℃;
C. 40℃;
D. 50℃。
【单选题】
全密封免维护酸性蓄电池在正常浮充条件下,可___均衡充电。
A. 不进行;
B. 进行;
C. 延时进行;
D. 无明确规定。
【单选题】
发电机定子绝缘电阻测定时需用2500V专用兆欧表对其三相测试___。
A. 15S;
B. 1min;
C. 2min;
D. 3min。
【单选题】
蓄电池与硅整流充电机并联于直流母线上作浮充电运行,当断路器合闸时,突增的大电流负荷___。
A. 主要由蓄电池承担;
B. 主要由硅整流充电机承担;
C. 蓄电池和硅整流充电机各承担1/2;
D. 无法确定。
【单选题】
阀控式密封免维护铅酸蓄电池浮充电应采用___充电法。
A. 半恒流;
B. 恒流;
C. 恒压;
D. 恒压限流。
【单选题】
直流系统正常运行时,必须保证其足够的浮充电流,任何情况下,不得用___单独向各个直流工作母线供电。
A. 蓄电池;
B. 充电装置或备用充电装置;
C. 联络开关;
D. 蓄电池和联络开关。
【单选题】
直流系统单极接地运行时间不能超过___。
A. 1小时;
B. 2小时;
C. 3小时;
D. 4小时。
【单选题】
直流系统发生负极完全接地时,正极对地电压___。
A. 升高到极间电压;
B. 降低;
C. 不变;
D. 略升高。
【单选题】
高厂变低压侧中性点接地方式为___。
A. 直接接地;
B. 间隙接地;
C. 经电阻接地;
D. 不接地。
【单选题】
浮充运行时浮充电机输出电流应等于___。
A. 正常负荷电流;
B. 蓄电池浮充电流;
C. 正常负荷电流和蓄电池浮充电流两者之和;
D. 正常负荷电流和蓄电池浮充电流两者之差。
【单选题】
直流系统接地时,对于断路器合闸电源回路,可采用___寻找接地点。
A. 瞬间停电法;
B. 转移负荷法;
C. 分网法;
D. 任意方法。
【单选题】
直流系统发生两点接地,将会使断路器___。
A. 拒动;
B. 误动作;
C. 误动或拒动;
D. 烧毁。
【单选题】
为了防止发生两点接地,直流系统应装设 ___足够高的绝缘监察装置。
A. 安全性;
B. 灵敏度;
C. 可靠性;
D. 绝缘。
【单选题】
机组220V动力直流系统蓄电池10h放电容量为___。
A. 400Ah;
B. 800Ah;
C. 1200Ah;
D. 1600Ah。
【单选题】
蓄电池正常运行方式是___方式。
A. 充电;
B. 放电;
C. 浮充电;
D. 充电-放电。
【单选题】
发电机过电流保护,一般均采用复合低电压启动。其目的是提高过流保护的___。
A. 可靠性;
B. 快速性;
C. 灵敏性;
D. 选择性。
【单选题】
过电流保护由电流继电器、时间继电器和___组成。
A. 中间继电器;
B. 电压继电器;
C. 防跳继电器;
D. 差动继电器。
【单选题】
当两段直流母线都有___故障时,未消除故障,严禁将母联开关合闸。
A. 短路;
B. 过压;
C. 接地;
D. 欠压。
【单选题】
由反应基波零序电压和利用三次谐波电压构成的100%定子接地保护,其基波零序电压元件的保护范围是___。
A. 由中性点向机端的定子绕组的85%~90%线匝;
B. 由机端向中性点的定子绕组的85%~90%线匝;
C. 100%的定子绕组线匝;
D. 由中性点向机端的定子绕组的50%线匝。
【单选题】
电力系统发生A相金属性接地短路时,故障点的零序电压___。
A. 与A相电压同相位;
B. 与A相电压相位相差180°;
C. 超前于A相电压90°;D、滞后于A相电压90°。
【单选题】
直接作用于跳闸的变压器保护为___。
A. 重瓦斯;
B. 轻瓦斯;
C. 定时限过负荷;
D. 温度高。
【单选题】
微机型保护装置运行环境温度为___。
A. 2~25℃;
B. 5~25℃;
C. 5~30℃;
D. 5~35℃。
【单选题】
鼠笼式电动机的启动次数应遵照厂家规定执行,无规定时,允许在热态下启动___。
A. 1次;
B. 2次;
C. 3次;
D. 4次。
【单选题】
110V直流系统采用___接线方式。
A. 单母线;
B. 单母分段;
C. 单母并列;
D. 双母并列。