【多选题】
An administrator is attempting to power on a virtual machine, but is unable to do so. Which two reasons are probable causes of the failure? (Choose two.)___
A. Storage access to the virtual machine swap file has been lost.
B. One of the virtual machine VMDK files is locked.
C. Virtual machine is running CentOS 7.0 64-bit.
D. Virtual machine has Hyper-Threading enabled.
查看试卷,进入试卷练习
微信扫一扫,开始刷题
相关试题
【多选题】
An administrator has configured a host profile so that ESXi 6.x hosts will point to the corporate NTP server for time synchronization. The NTP server is located at 10.0.30.213, but time has not been synchronized properly across the ESXi hosts. The administrator reviews Host Profile settings as shown in the Exhibit. Which two steps are required to resolve the issue? (Choose two.)___
A. Correct the NTP server IP address.
B. Check the host for host profile compliance.
C. Remediate the host based on the updated host profile.
D. Change the NTP server to the FQDN as IP Addresses are not supported.
【多选题】
An administrator is attempting to migrate a large Hadoop virtual machine using vMotion. The administrator notices a delay when the machine is quiesced. The Hadoop virtual machine is processing many transactions a second to an in-memory database. Which two actions would help reduce the amount of time needed to perform a vMotion on this virtual machine? (Choose two.)___
A. Use multiple NICs for the vMotion vmkernel port.
B. Use a 10Gbps Network card for the vMotion vmkernel port.
C. Add an additional management network to help transmit the data quicker.
D. Disable Fault Tolerance before performing the vMotion.
【多选题】
An administrator is installing a new network card in an ESXi 6.x host that is part of a vSphere cluster. When the host is placed into maintenance mode, the vSphere Web Client displays the progress bar at 2% for over 30 minutes. Which two are likely reasons for this occurrence? (Choose two.)___
A. Maintenance mode is unable to migrate all virtual machines from the host.
B. There is a large number of virtual machines that must be migrated from the host.
C. VMware High Availability is in the process of reconfiguring the cluster.
D. Each virtual machine on the
E. SXi host must be reconfigured to recognize the new adapter.
【多选题】
Which two events happen when Distributed Resource Scheduler (DRS) is disabled? (Choose two.)___
A. The cluster's resource pool heirarchy and affinity rules are re-established when DRS is turned back on.
B. The cluster's resource pool hierarchy and affinity rules are not re-established when DRS is turned back on.
C. The cluster's resource pools are removed from the cluster.
D. The cluster's resource pools are removed from the cluster and assigned to the hosts.
【多选题】
Which two networking connection types can be configured on a virtual switch? (Choose two.)___
A. Virtual machine portgroups
B. VMkernel services (such as NFS, iSCSI, or vMotion) to the physical network
C. Web services over the Management Network
D. NFS and FCoE storage services
【多选题】
An administrator creates a DRS cluster of eight ESXi 6.x hosts. There are 10 virtual machines balanced across the hosts. An attempt to place the first host into maintenance mode fails. What are two reasons that the host failed to enter maintenance mode? (Choose two.)___
A. The DRS cluster Automation Level is set to Partially Automated mode.
B. One of the virtual machines on the ESXi Host entering maintenance mode is configured with a DRS Host affinity rule Should run on hosts in group.
C. One of the virtual machines on the ESXi Host entering maintenance mode is configured with a DRS Host affinity rule Must run on hosts in group.
D. One of the virtual machines on the
E. SXi Host entering maintenance mode is configured with an individual Automation Level set to Partially Automated.
【多选题】
When modifying a vApp, which two vSphere entities can be added? (Choose two.)___
A. A resource pool
B. A network pool
C. A vApp
D. A folder
【多选题】
From which two locations in the inventory hierarchy can you deploy a virtual machine using a template? (Choose two.)___
A. Directly from the template.
B. From a compute resource.
C. From an existing virtual machine.
D. From a Datastore.
【多选题】
A company has decided to implement Virtual SAN within their vSphere 6.x environment. The Virtual SAN cluster will be composed of three ESXi 6.x hosts that are on the Virtual SAN Ready Node list. Each ESXi host includes: <Two SAS Controllers that support Passthrough Mode> < Four Solid State Drives (SSDs) 1TB in size each> <20 SAS Magnetic Disks (MDs) 1TB in size each> <The SSDs and MDs are evenly split between the two SAS controllers>. The company will pilot a Virtual SAN cluster utilizing VMware best practices while maximizing storage capacity. The Virtual SAN cluster will use Manual Mode. Which two Disk Group configurations would meet the stated configuration requirements? (Choose two.)___
A. 4 disk groups with 1 SSD and 5 MDs each
B. 2 disk groups with 1 SSD and 7 MDs each
C. 2 disk groups with 2 SSDs and 7 MDs each
D. 2 disk groups with 1 SSD and 10 MDs each
【多选题】
A physical Windows 2008 R2 Server is converted to a virtual machine using VMware vCenter Converter. Upon completion of the conversion and subsequent power on operation, the virtual machine fails to boot and the message below is observed in the Console of the virtual machine: <STOP 0x0000007B INACCESSIBLE_BOOT_DEVICE>. Which two potential issues may be causing this boot failure? (Choose two.)___
A. An incorrect SCSI controller was selected during conversion.
B. Incompatible software drivers were migrated into the virtual machine from the source machine.
C. The vmdk file backing the virtual machine was thick provisioned.
D. A snapshot was taken immediately after the conversion completed.
【多选题】
An administrator is configuring the Failover Order option on a vSphere Distributed Switch. Which two options should be used with IP-hash load balancing? (Choose two.)___
A. Active Uplinks
B. Standby Uplinks
C. Unused Uplinks
D. Override Failover Order
【多选题】
An administrator is configuring the Maximum Transmission Unit value on a vSphere Distributed Switch. Which two options are typical values for ESXi networking? (Choose two.)___
A. 1492
B. 1500
C. 9000
D. 9089
【多选题】
Which two configurable options apply to both virtual machine CPU and memory allocation? (Choose two.)___
A. Reservation
B. Shares
C. Resource Pool
D. Reserve All
【多选题】
When attempting to power on a Virtual Machine you observe the following error: <Cannot open the disk '/vmfs/volumes/volume/vm/vm-000002.vmdk' or one of the snapshot disks it depends on.> Which three actions will be the best solutions to address this problem? (Choose three.)___
A. Verify that the virtual machine's disk files are present.
B. Investigate the host and virtual machine log files.
C. Verify the vmdk descriptor files and if required, recreate them.
D. Delete the disk file preventing the power on operation.
E. Migrate or register the virtual machine to a different host.
【多选题】
An administrator has been tasked with enabling High Availability ___ on a cluster in a vSphere 6.x environment with default settings. The cluster configures properly and there are no errors. The next day when powering on a virtual machine, an error is presented: <Not Enough Failover Resources>. Which three scenarios are likely causes of this error message? (Choose three.)(CDE)
A. The default VM Monitoring Sensitivity is set too high.
B. There are not enough datastore heartbeat datastores configured by default.
C. The default slot size in the cluster is set too high.
D. There are virtual machines with large CPU reservations.
E. A host is in maintenance mode for a replacement of a failed Hard Drive.
【多选题】
vMotion can be performed between which three physical boundaries? (Choose three.)___
A. Between two vCenter Server Systems
B. Between two vSphere Distributed Virtual Switches
C. Between two vCenter Server Datacenter objects
D. Between two VMware NSX Layer 4 segments
E. Between two NFS datastores
【多选题】
An administrator configures vSphere Replication for a virtual machine and enables multiple point in time (PIT) instances under the recovery settings in the Configure Replication wizard. Which two statements are correct for vSphere Replication with multiple point in time instances enabled? (Choose two.)___
A. vSphere Replication retains a number of snapshot instances of the virtual machine on the target site based on the retention policy that you specify.
B. vSphere Replication uses the virtual machine's snapshot instances to define the target site Point in Time instance based on the retention policy that you specify.
C. vSphere Replication does not support virtual machines with snapshots.
D. vSphere Replication supports virtual machines with snapshots.
【多选题】
An administrator is virtualizing a physical application server and adding it to an existing multi-tiered vApp. The application license is currently tied to the physical NIC's MAC address, so the administrator needs to ensure the license will function properly in the virtual machine. Which two actions can the administrator take to satisfy this task? (Choose two.)___
A. Set the MAC address for the vNIC in the guest operating system.
B. Install the physical server's NIC into the ESXi host.
C. Configure the MAC address for the vNIC using the vSphere Web Client.
D. Assign the physical server NIC's MAC address in the vSphere Distributed Switch.
【多选题】
Which two Fibre Channel zoning options are supported with vSphere 6.x? (Choose two.)___
A. Single-Initiator
B. Single-Initiator-Single-Target
C. Multiple-Initiators-Single-Target
D. Multiple-Initiators-Multiple-Targets
【多选题】
An administrator is attempting to remove an ESXi 6.x host from a vSphere Distributed Switch (vDS). When the administrator attempts to remove the host, the following error is observed: <The resource '16' is still in use.> What three steps are needed to successfully remove the host from the switch? (Choose three.)___
A. Select Manage Ports on the vDS for the host.
B. Locate all ports currently in use on the vDS for the host.
C. Migrate or delete any vmkernel or virtual machine adapters associated with the switch.
D. Remove all network cards from the switch before trying to remove the host.
E. Create a standard switch for everything to be automatically be migrated to.
【多选题】
Which two Virtual SAN related actions might start resynchronization of virtual machine objects? (Choose two.)___
A. Editing a virtual machine storage policy to increase the number of replicas.
B. Editing a virtual machine storage policy to reduce the number of replicas.
C. Editing a virtual machine storage policy to increase the number of disk stripes.
D. Editing a virtual machine storage policy to reduce the number of disk stripes.
【多选题】
An administrator is troubleshooting basic network connectivity issues. Which two scenarios are potential issues that this administrator might face? (Choose two.)___
A. The vSwitch is not attached to the correct physical network.
B. The portgroup is not configured to use correct VLAN.
C. Traffic shaping is configured incorrectly.
D. Jumbo frames is configured incorrectly.
【多选题】
Which three items should be validated prior to installing ESXi 6.x? (Choose three.)___
A. Remote Storage has been disconnected.
B. Installation media is available.
C. Server hardware clock is set to UTC.
D. Storage has been partitioned with a VMFS volume.
E. Network cards have been setup to use Jumbo
F. rames.
【多选题】
An administrator is performing an interactive installation of ESXi 6.x. Which three options are available for installation? (Choose three.)___
A. DVD
B. USB
C. PXE
D. Scripted
E. Auto Deploy
【多选题】
After installation of a host in your test environment, you need to move it to production. The only major change that needs to be made is that the hostname of the server needs to change. What are two ways that an administrator can change the host name without editing configuration files on the host directly? (Choose two.)___
A. Login to the Direct Console User Interface and change it from here.
B. Edit the Default TCP/IP Configuration from the vSphere Web Client.
C. Use the Ruby vSphere Client to send a script to the ESXi host that updates the hostname.
D. Update the information in DNS and the
E. SXi host will automatically update with these changes.
【多选题】
An administrator has unsuccessfully attempted several times to install an Operating System inside a virtual machine. The administrator finds that the installation fails at random intervals. Which two actions can be taken to resolve this issue? (Choose two.)___
A. Verify the md5sum and if invalid, download the installation files again.
B. Attempt the installation an additional time.
C. Attempt to use a different installation media or installation method.
D. Create a new virtual machine and attempt the installation with the existing media.
【多选题】
VMware tools is failing to install on a Microsoft Windows virtual machine. What are two possible situations that would prevent the installation? (Choose two.)___
A. The VMware tools installation media is corrupt.
B. The incorrect Operating System was selected in the virtual machine options.
C. The software prerequisites have not been installed.
D. The prerequisite services have not been started.
【多选题】
As part of a multisite Single Sign-On (SSO) deployment what two steps are required to ensure that a change to one Single Sign-On instance is propagated to the other instances? (Choose two.)___
A. Schedule a Replication Task on the primary instance
B. Select the first instance during the installation of subsequent instances
C. During the installation of each instance choose Linked-Mode
D. Enable Synchronize to Active Directory on each instance
【多选题】
You need to add an object to an existing vApp using the vSphere Web Client. How is this accomplished?___
A. Create an Object Inside the vApp.
B. Add an Object to a vApp.
C. Add an Object to the
D. atastore the vApp is located in.
【多选题】
Which three steps must be taken to use vSphere Update Manager 6.x to upgrade an ESXi 5.5 host to vSphere 6.x? (Choose three.)___
A. Download an ESXi Image.
B. Configure the vSphere Update Manager Download Service.
C. Create a baseline and attach it to the ESXi Host.
D. Scan the vCenter Content Library for the
E. SXi Image.
【多选题】
Which two options would allow a database administrator, with no access to the vSphere infrastructure, to connect to a virtual machine? (Choose two.)___
A. Use the Virtual Machine Remote Console (VMRC).
B. Use Remote Desktop Protocol (RDP) to connect.
C. Ask the vSphere administrator to grant permission to access the console through vCenter Server.
D. Ask the vSphere administrator to grant permission to access with the Horizon View Direct Connect Client.
【多选题】
Which three are architecture components of vRealize Operations? (Choose three.)___
A. Identity Server
B. Administrative Server
C. Analytics Server
D. Database Server
E. Connection Broker
【单选题】
金克拉金克拉撒旦蒂萨里大儿童家爱丽丝打开就撒开绿灯技术的()
A. 手动阀手动阀
B. 撒旦
C. 反对法
D. 第三方
【单选题】
金克拉金克拉撒退热贴开绿灯技术的()
A. 是否
B. 阿斯顿
C. 撒旦
D. 感到反感
【单选题】
而非热舞法国会开绿灯技术的()
A. 撒的
B. 热个股分化
C. 返回
D. 而我认为
【单选题】
十大富豪不给发货返回返回返回()
A. dfdfgd
B. 梵蒂冈梵蒂冈
C. 广泛大概
D. 热
【多选题】
马克思主义哲学所讲的静止是指___
A. 运动的一种特殊形式
B. 绝对不动
C. 排斥运动
D. 事物处于量变状态
E. 事物在特定参考系中未发生位置变动
【多选题】
物质和运动的关系是___
A. 运动是物质的固有属性
B. 物质是运动的承担者
C. 运动是物质的存在方式
D. 运动不一定是物质的运动
E. 物质不一定都在运动
【多选题】
社会的物质性体现在___
A. 劳动是社会产生和存在的决定性因素
B. 在社会中不存在精神的现象和活动
C. 物质资料的产生是社会历史的前提
D. 全部社会生活在本质上是实践的
E. 社会生活中不存在物质关系以外的其他关系
【多选题】
意识的能动作用表现在___
A. 反映客观世界
B. 创造物质世界
C. 通过实践改造客观世界
D. 创造理论体系
E. 为自然界创造秩序
推荐试题
【多选题】
以下描述ECC路由的说法,正确的有:___。
A. 网管通过TCP/IP协议与网关网元通信;网关网元和非网关网元之间通过ECC路由通信。
B. 链型网中,如果非网关网元的主控板不在位,则该网元及其后的网元都不能登录。
C. 如果网关网元的主控板不在位,则所有该网关网元管理的网元都不能登录。
D. 网络中所有网元的IP地址都必须和网管计算机的网卡的IP地址在同一网段,否则不能登入。
【多选题】
PTN3900用EG16做处理板时,对应的接口板类型可以为:___
A. ETFC
B. EFG2
C. POD41
D. D75
【多选题】
关于PTN的调测,以下哪些说法是正确的:___
A. PTN网元即使在网元处于安装态时网元配置数据上载操作仍然可以成功
B. 通过MDS2610,我们可以进行网元IP、ID和网元名称的设置;还可以进行光口光功率测量和单板状态的检查;同时还可以用MDS2610下发命令配置脚本
C. 我们可以用MDS 2610清空PTN网元的数据库
D. PTN可以采用DC工具对网元进行升级,可以使用集成在网管的DC工具,也可以使用独立部署的DC工具
【多选题】
关于PTN控制平面,以下哪些说法是正确的?:___
A. FRR可以设置多条bypass隧道;APS只能配置一条保护隧道
B. PTN动态tunnel的标签是用LDP协议分配的,动态PW标签是用RSVP-TE协议分配的
C. 目前,PTN的MPLS tunnel的是单向的
D. 网元ID在PTN控制平面中起到唯一标识这台网元,并在控制平面的信令协商中起作用
【多选题】
关于PTN的XDSL特性,以下哪些说法是正确的___
A. PTN盒式设备的XDSL板有ADS2和SHD4,其中SHD4单板有ATM和EFM两种模式
B. PTN盒式设备的ADS2板支持多路绑定的功能
C. PTN的offload场景,有基于EFM转发和基于IP转发的offload应用场景
D. 在两端PTN设备上创建动态tunnel时,需要在DSLAM设备上配置命令允许BPDU报文通过
【多选题】
以下关于PTN DCN的说法中那些是正确的:___
A. PTN的网元ID,网元IP和LSR ID和DCN都有关系
B. PTN的DCN通道传送的是非网关网元和网关网元之间的网管信息
C. PTN的DCN路由是通过ISIS协议学到的
D. PTN的POD41单板,EFG2单板,EX2单板上的两个口默认DCN都是使能的
【多选题】
PTN设备支持的以下时钟中,那些是需要中间各个节点都支持该类型时钟的___
A. 同步以太时钟
B. 同步SDH时钟
C. CES ACR时钟
D. TOP时钟
【多选题】
SDH网络是由一些SDH网络单元(NE)组成的,并完成___的功能。
A. 同步信息传输
B. 复用
C. 分插
D. 交叉连接
【多选题】
在PTN的五款产品中,支持在“网络侧”用以下哪几种接口组网?___(注意是指网络侧)
A. GE
B. POS STM-4/STM-1
C. XDSL
D. ML-PPP、E1、EIMA、E1
【多选题】
以下关于PTN支持的业务描述正确的是___
A. 目前PTN支持多个ATM连接汇聚映射到一个PW中
B. 目前PTN不支持多个CES业务汇聚映射到一个PW中
C. PTN 设备间可以建立ATM PW 来仿真端到端的ATM 业务
D. 目前PTN支持多个以太业务汇聚映射到一个PW中
【多选题】
与SDH 相比,DWDM 在扩容时:___
A. 更容易中断原来的业务
B. 更容易保护原来的业务
C. 比较方便
D. 系统更复杂
【多选题】
SDH网元内部存在的通信方式主要有___
A. 2M通信
B. 邮箱通信
C. 板间通信
D. 串口通信
【多选题】
SDH体制中集中监控功能的实现由___
A. 段开销
B. 线路编码的冗余码
C. 通道开销
D. 业务净负荷
【多选题】
下面的哪些SDH设备告警和性能能够引发复用段保护发生倒换___
A. TU12-AIS
B. AU-AIS
C. MS-AIS
D. R-LOF
【多选题】
SDH设备可配置成TM网元,它的特点是___
A. 所有光方向到TM的业务必须落地;
B. 只能有一个光方向;
C. 不同光方向的业务不能通过光板直接穿通;不同光方向的业务
D. 光板的最高速率必须低于622M。
【判断题】
PTN网络需要感知PWE3所承载的业务。
【判断题】
PTN的POD41板可以承载IP tunnel。
【判断题】
对于OptiX PTN 3900上TPS保护,如果接口板D75或者D12故障,对应处理母板+子卡(MP1+MQ1)正常,是不能够进行TPS保护的。
【判断题】
当ETFC、POD41、EFG2安装在OptiX PTN 1900的第3至第7槽位时,对应的处理板为CXP,不需要配置其他类子卡。
【判断题】
目前TPS保护倒换支持的处理子卡主要有:MD1,MQ1,CD1。
【判断题】
MPLS OAM中通过CV(Connectivity Verification)/FFD(Fast Failure Detection)可以检测LSP 的连通性,它们可以在三个报文发送周期内检测到LSP链路故障。
【判断题】
在创建PTN tunnel时,我们可以设置tunnel的优先级,有0,1,…7,数值越大,优先级越高。
【判断题】
B1字节位于再生段开销中,可监测出整个STM-N帧在传输中出现了的误码块数,因此高阶通道存在误码时,B1也能检测上报出来。
【判断题】
ITU-T建议,SDH时钟自由振荡的精度优于4.6ppm,属于G.813时钟。
【判断题】
按照ITU-T建议规定,复用段倒换时间要求在50ms之内是有条件的,如:全环节点数少于16个等等。
【判断题】
当SNCP保护环正处于保护倒换状态时,复位设备的SCC板会影响正在运行的业务。
【判断题】
复用段保护中,一般需要设置各网元的复用段协议ID号,为了保证ID不重复,最好的办法是此复用段协议ID号与网元ID号是一样的。
【判断题】
PTN912/910/950的XDSL接口板有SHD4和ADS2类型的单板,它们主要用在PTN网络的用户侧。
【判断题】
目前,PTN中的用户侧到网络侧的CES业务可以支持多条CES业务汇聚到一条PW上。
【判断题】
目前,现在我们用软件测试光口的光功率除了用网管测量外,还可以用MDS2610测量。
【判断题】
PTN的ACR时钟和1588时钟都可以实现时间同步。
【判断题】
对于目前PTN的CES,ATM和以太业务,网管上都支持用PW ping测试。
【单选题】
高级工]25K型空调双层客车AC380VⅠ、Ⅱ路供电电源的分线箱在_______。___
A. 车辆的底部
B. 车辆上下层的楼梯间内
C. 车辆一侧的墙板内
D. 车辆的顶部
【单选题】
高级工]25T客车逆变电源为空调、电加热器以及其他车载交流380V用电设备供电,变压器为_______用电设备供电。___
A. AC220V
B. DC110V
C. AC380V
D. DC48V
【单选题】
高级工]BSP青藏车空调机组的新风温度控制器探头设在_______附近。___
A. 新风过滤网
B. 送风口
C. 回风口
D. 过渡风道下部
【单选题】
高级工]25型空调控制柜[KLC40C-1T1]的1Q是控制电路的_______保护元件。___
【单选题】
高级工]25K型空调客车的空调控制柜[KLC40C22003185466-1T1]能控制_______空调机组。___
A. 2套
B. 1套
C. 全列车
D. 部分车厢
【单选题】
高级工]25K型空调客车的空调控制柜[KLC40C-1T1]中的98,100号线是_______。___
A. 温度控制线
B. 集控线
C. 延时控制线
D. 集中供电线