【多选题】
A physical Windows 2008 R2 Server is converted to a virtual machine using VMware vCenter Converter. Upon completion of the conversion and subsequent power on operation, the virtual machine fails to boot and the message below is observed in the Console of the virtual machine: <STOP 0x0000007B INACCESSIBLE_BOOT_DEVICE>. Which two potential issues may be causing this boot failure? (Choose two.)___
A. An incorrect SCSI controller was selected during conversion.
B. Incompatible software drivers were migrated into the virtual machine from the source machine.
C. The vmdk file backing the virtual machine was thick provisioned.
D. A snapshot was taken immediately after the conversion completed.
查看试卷，进入试卷练习
微信扫一扫，开始刷题
相关试题
【多选题】
An administrator is configuring the Failover Order option on a vSphere Distributed Switch. Which two options should be used with IP-hash load balancing? (Choose two.)___
A. Active Uplinks
B. Standby Uplinks
C. Unused Uplinks
D. Override Failover Order
【多选题】
An administrator is configuring the Maximum Transmission Unit value on a vSphere Distributed Switch. Which two options are typical values for ESXi networking? (Choose two.)___
A. 1492
B. 1500
C. 9000
D. 9089
【多选题】
Which two configurable options apply to both virtual machine CPU and memory allocation? (Choose two.)___
A. Reservation
B. Shares
C. Resource Pool
D. Reserve All
【多选题】
When attempting to power on a Virtual Machine you observe the following error: <Cannot open the disk '/vmfs/volumes/volume/vm/vm-000002.vmdk' or one of the snapshot disks it depends on.> Which three actions will be the best solutions to address this problem? (Choose three.)___
A. Verify that the virtual machine's disk files are present.
B. Investigate the host and virtual machine log files.
C. Verify the vmdk descriptor files and if required, recreate them.
D. Delete the disk file preventing the power on operation.
E. Migrate or register the virtual machine to a different host.
【多选题】
An administrator has been tasked with enabling High Availability ___ on a cluster in a vSphere 6.x environment with default settings. The cluster configures properly and there are no errors. The next day when powering on a virtual machine, an error is presented: <Not Enough Failover Resources>. Which three scenarios are likely causes of this error message? (Choose three.)(CDE)
A. The default VM Monitoring Sensitivity is set too high.
B. There are not enough datastore heartbeat datastores configured by default.
C. The default slot size in the cluster is set too high.
D. There are virtual machines with large CPU reservations.
E. A host is in maintenance mode for a replacement of a failed Hard Drive.
【多选题】
vMotion can be performed between which three physical boundaries? (Choose three.)___
A. Between two vCenter Server Systems
B. Between two vSphere Distributed Virtual Switches
C. Between two vCenter Server Datacenter objects
D. Between two VMware NSX Layer 4 segments
E. Between two NFS datastores
【多选题】
An administrator configures vSphere Replication for a virtual machine and enables multiple point in time (PIT) instances under the recovery settings in the Configure Replication wizard. Which two statements are correct for vSphere Replication with multiple point in time instances enabled? (Choose two.)___
A. vSphere Replication retains a number of snapshot instances of the virtual machine on the target site based on the retention policy that you specify.
B. vSphere Replication uses the virtual machine's snapshot instances to define the target site Point in Time instance based on the retention policy that you specify.
C. vSphere Replication does not support virtual machines with snapshots.
D. vSphere Replication supports virtual machines with snapshots.
【多选题】
An administrator is virtualizing a physical application server and adding it to an existing multi-tiered vApp. The application license is currently tied to the physical NIC's MAC address, so the administrator needs to ensure the license will function properly in the virtual machine. Which two actions can the administrator take to satisfy this task? (Choose two.)___
A. Set the MAC address for the vNIC in the guest operating system.
B. Install the physical server's NIC into the ESXi host.
C. Configure the MAC address for the vNIC using the vSphere Web Client.
D. Assign the physical server NIC's MAC address in the vSphere Distributed Switch.
【多选题】
Which two Fibre Channel zoning options are supported with vSphere 6.x? (Choose two.)___
A. Single-Initiator
B. Single-Initiator-Single-Target
C. Multiple-Initiators-Single-Target
D. Multiple-Initiators-Multiple-Targets
【多选题】
An administrator is attempting to remove an ESXi 6.x host from a vSphere Distributed Switch (vDS). When the administrator attempts to remove the host, the following error is observed: <The resource '16' is still in use.> What three steps are needed to successfully remove the host from the switch? (Choose three.)___
A. Select Manage Ports on the vDS for the host.
B. Locate all ports currently in use on the vDS for the host.
C. Migrate or delete any vmkernel or virtual machine adapters associated with the switch.
D. Remove all network cards from the switch before trying to remove the host.
E. Create a standard switch for everything to be automatically be migrated to.
【多选题】
Which two Virtual SAN related actions might start resynchronization of virtual machine objects? (Choose two.)___
A. Editing a virtual machine storage policy to increase the number of replicas.
B. Editing a virtual machine storage policy to reduce the number of replicas.
C. Editing a virtual machine storage policy to increase the number of disk stripes.
D. Editing a virtual machine storage policy to reduce the number of disk stripes.
【多选题】
An administrator is troubleshooting basic network connectivity issues. Which two scenarios are potential issues that this administrator might face? (Choose two.)___
A. The vSwitch is not attached to the correct physical network.
B. The portgroup is not configured to use correct VLAN.
C. Traffic shaping is configured incorrectly.
D. Jumbo frames is configured incorrectly.
【多选题】
Which three items should be validated prior to installing ESXi 6.x? (Choose three.)___
A. Remote Storage has been disconnected.
B. Installation media is available.
C. Server hardware clock is set to UTC.
D. Storage has been partitioned with a VMFS volume.
E. Network cards have been setup to use Jumbo
F. rames.
【多选题】
An administrator is performing an interactive installation of ESXi 6.x. Which three options are available for installation? (Choose three.)___
A. DVD
B. USB
C. PXE
D. Scripted
E. Auto Deploy
【多选题】
After installation of a host in your test environment, you need to move it to production. The only major change that needs to be made is that the hostname of the server needs to change. What are two ways that an administrator can change the host name without editing configuration files on the host directly? (Choose two.)___
A. Login to the Direct Console User Interface and change it from here.
B. Edit the Default TCP/IP Configuration from the vSphere Web Client.
C. Use the Ruby vSphere Client to send a script to the ESXi host that updates the hostname.
D. Update the information in DNS and the
E. SXi host will automatically update with these changes.
【多选题】
An administrator has unsuccessfully attempted several times to install an Operating System inside a virtual machine. The administrator finds that the installation fails at random intervals. Which two actions can be taken to resolve this issue? (Choose two.)___
A. Verify the md5sum and if invalid, download the installation files again.
B. Attempt the installation an additional time.
C. Attempt to use a different installation media or installation method.
D. Create a new virtual machine and attempt the installation with the existing media.
【多选题】
VMware tools is failing to install on a Microsoft Windows virtual machine. What are two possible situations that would prevent the installation? (Choose two.)___
A. The VMware tools installation media is corrupt.
B. The incorrect Operating System was selected in the virtual machine options.
C. The software prerequisites have not been installed.
D. The prerequisite services have not been started.
【多选题】
As part of a multisite Single Sign-On (SSO) deployment what two steps are required to ensure that a change to one Single Sign-On instance is propagated to the other instances? (Choose two.)___
A. Schedule a Replication Task on the primary instance
B. Select the first instance during the installation of subsequent instances
C. During the installation of each instance choose Linked-Mode
D. Enable Synchronize to Active Directory on each instance
【多选题】
You need to add an object to an existing vApp using the vSphere Web Client. How is this accomplished?___
A. Create an Object Inside the vApp.
B. Add an Object to a vApp.
C. Add an Object to the
D. atastore the vApp is located in.
【多选题】
Which three steps must be taken to use vSphere Update Manager 6.x to upgrade an ESXi 5.5 host to vSphere 6.x? (Choose three.)___
A. Download an ESXi Image.
B. Configure the vSphere Update Manager Download Service.
C. Create a baseline and attach it to the ESXi Host.
D. Scan the vCenter Content Library for the
E. SXi Image.
【多选题】
Which two options would allow a database administrator, with no access to the vSphere infrastructure, to connect to a virtual machine? (Choose two.)___
A. Use the Virtual Machine Remote Console (VMRC).
B. Use Remote Desktop Protocol (RDP) to connect.
C. Ask the vSphere administrator to grant permission to access the console through vCenter Server.
D. Ask the vSphere administrator to grant permission to access with the Horizon View Direct Connect Client.
【多选题】
Which three are architecture components of vRealize Operations? (Choose three.)___
A. Identity Server
B. Administrative Server
C. Analytics Server
D. Database Server
E. Connection Broker
【单选题】
金克拉金克拉撒旦蒂萨里大儿童家爱丽丝打开就撒开绿灯技术的（）
A. 手动阀手动阀
B. 撒旦
C. 反对法
D. 第三方
【单选题】
金克拉金克拉撒退热贴开绿灯技术的（）
A. 是否
B. 阿斯顿
C. 撒旦
D. 感到反感
【单选题】
而非热舞法国会开绿灯技术的（）
A. 撒的
B. 热个股分化
C. 返回
D. 而我认为
【单选题】
十大富豪不给发货返回返回返回（）
A. dfdfgd
B. 梵蒂冈梵蒂冈
C. 广泛大概
D. 热
【多选题】
马克思主义哲学所讲的静止是指___
A. 运动的一种特殊形式
B. 绝对不动
C. 排斥运动
D. 事物处于量变状态
E. 事物在特定参考系中未发生位置变动
【多选题】
物质和运动的关系是___
A. 运动是物质的固有属性
B. 物质是运动的承担者
C. 运动是物质的存在方式
D. 运动不一定是物质的运动
E. 物质不一定都在运动
【多选题】
社会的物质性体现在___
A. 劳动是社会产生和存在的决定性因素
B. 在社会中不存在精神的现象和活动
C. 物质资料的产生是社会历史的前提
D. 全部社会生活在本质上是实践的
E. 社会生活中不存在物质关系以外的其他关系
【多选题】
意识的能动作用表现在___
A. 反映客观世界
B. 创造物质世界
C. 通过实践改造客观世界
D. 创造理论体系
E. 为自然界创造秩序
【多选题】
金克拉金克拉撒旦蒂萨里大儿童家爱丽丝打开就撒开绿灯技术的（）
A. 手动阀手动阀
B. 撒旦
C. 反对法
D. 第三方
【多选题】
金克拉金克拉撒退热贴开绿灯技术的（）
A. 是否
B. 阿斯顿
C. 撒旦
D. 感到反感
【多选题】
而非热舞法国会开绿灯技术的（）
A. 撒的
B. 热个股分化
C. 返回
D. 而我认为
【多选题】
十大富豪不给发货返回返回返回（）
A. dfdfgd
B. 梵蒂冈梵蒂冈
C. 广泛大概
D. 热
【判断题】
金克拉金克拉撒旦蒂萨里大儿童家爱丽丝打开就撒开绿灯技术的（）
推荐试题
【单选题】
裂解气压缩机停车后，对分离系统的处理不正确的是___。
A. 碳二加氢反应器紧急停车
B. 甲烷化反应器紧急停车
C. 碳三反应器紧急停车
D. 停止罐区乙烯外送
【单选题】
裂解气压缩机停车后，对分离系统的处理错误的是___。
A. 冷箱系统紧急停车处理
B. 乙烯精馏塔全回流运转
C. 丙烯精馏塔全回流运转
D. 脱丙烷塔全回流运转
【单选题】
裂解气压缩机停车后，对分离系统的处理不正确的是___。
A. 碳二加氢反应器紧急停车
B. 甲烷化反应器紧急停车
C. 碳三反应器紧急停车
D. 脱甲烷塔汽提操作
【单选题】
乙烯压缩机停车后，对分离系统的处理正确的是___。
A. 停乙烯塔运行
B. 停丙烯塔运行
C. 停火炬系统
D. 丙烯外送停止
【单选题】
乙烯制冷压缩机停车后，对分离系统的处理正确的是___。
A. 碳二加氢反应器紧急停车
B. 甲烷化反应器紧急停车
C. 碳三反应器紧急停车
D. 维护膨胀机正常运行
【单选题】
乙烯制冷压缩机停车后，对分离系统的处理不正确的是___。
A. 脱甲烷塔汽提操作
B. 停碳二加氢
C. 维护膨胀机正常运行
D. 立即停甲烷化反应器
【单选题】
碳二加氢反应器因故停车，对分离系统处理正确的是___。
A. 乙烯精馏塔全回流运转
B. 脱乙烷塔紧急停车
C. 分离热区停车处理
D. 停止所有产品外送
【单选题】
碳二加氢反应器因故停车，下列处理不正确的是___。
A. 乙烯精馏塔全回流运转
B. 低压脱丙烷塔正常运行
C. 脱乙烷塔保证灵敏板温度，塔釜产品正常外送
D. 脱乙烷塔回流运行
【单选题】
甲烷化反应器因故停车，如分离系统有外供氢气，则下列处理正确的是___。
A. 乙烯精馏塔全回流运转
B. 碳三反应器停止注氢
C. 碳二加氢反应器停车
D. 分离系统只对甲烷化系统处理，其余正常运转
【单选题】
甲烷化反应器停车后，分离系统如没有外供氢气，则下列处理正确的是___。
A. 碳二加氢反应器停车
B. 乙烯精馏塔全回流
C. 碳三加氢反应器停止注氢
D. 丙烯精馏塔正常运行
【单选题】
氢气干燥器进料阀填料处漏氢气，现场人员一次处理正确的是___。
A. 接氮气稀释
B. 用蒸汽保护
C. 不做任何处理
D. 通知班长
【单选题】
丙烯精馏塔塔顶冷凝器内漏时，处理方法正确的是___。
A. 换热器切出检修
B. 不需处理
C. 降负荷即可
D. 停车检修
【单选题】
正常情况下发现冷泵机械封轻微泄漏时，工艺上处理正确的是___。
A. 将泵切出系统倒空，上报检修
B. 用水冲洗
C. 用氮气保护
D. 无须处理
【单选题】
精馏塔顶温高正确的处理方法是___。
A. 适当增大回流量
B. 增加进料量
C. 减小回流
D. 提高灵敏板温度
【单选题】
精馏塔顶温高正确的处理方法是___。
A. 降低塔釜液面
B. 提高加热量
C. 减小塔顶回流
D. 减小加热量
【单选题】
精馏塔塔釜液面空时正确的处理方法是___。
A. 减小进料量
B. 减小回流
C. 减小塔釜采出量
D. 提高塔釜加热
【单选题】
精馏塔塔釜液面空时不正确的处理方法是___。
A. 减小加热量
B. 增加回流
C. 减小塔釜采出量
D. 提高塔釜加热
【单选题】
精馏塔压差高的处理方法正确的是___。
A. 降低采出量
B. 降低釜液面
C. 保证产品质量的同时，适当减小回流
D. 提高灵敏板温度
【单选题】
精馏塔压差高的处理方法不正确的是___。
A. 适当增大采出量
B. 适当提塔釜液面
C. 保证产品质量的同时，适当减小回流
D. 适当降加热
【单选题】
1标准大气压等于___帕斯卡。
A. 98100
B. 10000
C. 101330
D. 103300
【单选题】
关于绝对压强、表压、大气压、真空度的关系，下列表达式正确的是___。
A. 绝对压强=表压-大气压
B. 绝对压强=大气压-表压
C. 真空度=大气压强-绝对压强
D. 表压=大气压强-绝对压强
【多选题】
下列描述正确的是:___
A. 可燃液体的闪点越低，火灾危险越小。
B. 可燃物质的自燃点越高，则火灾危险性越大。
C. 可燃液体的闪点越低，火灾危险越大。
D. 可燃物质的自燃点越高，则火灾危险性越小
【多选题】
根据润滑剂状态的不同，可分为以下几大类___
A. 润滑油
B. 润滑脂
C. 固体润滑剂
D. 气体润滑剂
【多选题】
易燃液体的危险特性包括___
A. 易燃性
B. 蒸汽易爆性
C. 流体扩散性
D. 毒害性
【多选题】
下列选项中，描述气力输送特点正确的是___
A. 产生高压气体是气力输送的用途之一
B. 利用气体在管道内的流动输送粉粒状固体
C. 空气是最常用的输送介质
D. 气力输送机械与液体输送机械的工作原理基本相同
【多选题】
热传播的形式有:___
A. 热传导
B. 热辐射
C. 热损失
D. 热对流
【多选题】
设备外壁温度较高时,其向周围环境介质散发热量的方式有___｡
A. 热传导
B. 对流传导
C. 热辐射
D. 蒸发
【多选题】
现代石油化工生产特点是:___
A. 生产装置规模大、集中布局、立体交叉
B. 连续化、自动化生产，科技含量高
C. 易燃易爆、有毒有害
D. 高温高压、
【多选题】
离心泵轴承一般分为___｡
A. 滑动轴承
B. 推力轴承
C. 直线轴承
D. 滚动轴承
【多选题】
列管式换热器包括___
A. 喷淋式
B. 固定管板式
C. 浮头式
D. U型管式
【多选题】
下类介质可用泵来输送的是___
A. 液态介质
B. 液、固混合介质
C. 气态介质
D. 固态介质
【多选题】
下列各类泵当中，属于容积泵的是___
A. 柱塞泵
B. 隔膜泵
C. 螺杆泵
D. 齿轮泵
【多选题】
属于润滑油“五定”的内容有。___
A. 定点
B. 定质、定量
C. 定期
D. 定人
【多选题】
润滑油有___的作用。
A. 润滑作用
B. 冷却作用
C. 清洗作用
D. 密封作用
【多选题】
润滑油带水时，应作的处理有。___
A. 投用润滑油滤油机
B. 置换润滑油
C. 油箱静置分层，排水
D. 不需处理
【多选题】
精馏塔根据结构大致可分为( )塔和( )塔两大类。___
【多选题】
漏电保护装置主要用于___。
A. 防止人身触电事故
B. 防止中断供电
C. 减少线路损耗
D. 防止漏电火灾事故
【多选题】
下列属于电气火灾灭火器的是___
A. 干粉灭火器
B. CO2灭火器
C. 泡沫灭火器
D. 1211灭火器
【多选题】
DCS是分散控制系统，又叫集中分散控制系统，它是利用___实现过程控制和过程管理的控制系统
A. 计算机技术
B. 控制技术
C. 通信技术
D. 图形显示技术
