刷题
导入试题
【多选题】
关于依法治国与以德治国的关系,下列说法正确的有___。
A. 法律是成文的道德,道德是内心的法律
B. 要强化道德对法治的支撑作用
C. 要把道德要求贯彻到法治建设之中
D. 要用法治手段解决道德领域突出问题
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
ABCD
解析
暂无解析
相关试题
【多选题】
坚持全面从严治党,必须___,统筹推进党的各项建设,不断增强党的执政能力。
A. 以党章为根本遵循
B. 把党的政治建设摆在首位
C. 思想建党和制度治党同向发力
D. 抓住“关键少数”
E. 以宪法为准绳
【多选题】
党的十九大报告提出,夺取反腐败斗争压倒性胜利,要坚持___,坚持重遏制、强高压、长震慑,坚持受贿行贿一起查,坚决防止党内形成利益集团。
A. 无禁区
B. 全覆盖
C. 零容忍
D. 广覆盖
【多选题】
党对统一战线的领导主要是政治领导,即___的领导,主要体现为党委领导不是部门领导、集体领导而不是个人领导。
A. 政治原则
B. 政治方向
C. 重大方针政策
D. 具体工作
【多选题】
党的纪律主要包括政治纪律、组织纪律、___、工作纪律和生活纪律。
A. 廉洁纪律
B. 干部纪律
C. 作风纪律
D. 群众纪律
【单选题】
The two main islands of the British Isles are .
A. A. Great Britain and Ireland
B. B. Great Britain and Scotland
C. C. Great Britain and Wales
D. D. Great Britain and England
【单选题】
2. is the capital city of Scotland.
A. A. Belfast
B. B. Edinburgh
C. C. Aberdeen
D. D. Cardiff
【单选题】
According to a 2005 estimate, Britain now has a population of over million.
A. A. 160
B. B. 600
C. C. 60
D. D. 16
【单选题】
Among the four parts of the United Kingdom, is the smallest.
A. A. England
B. B. Scotland
C. C. Wales
D. D. Northern Ireland
【单选题】
Almost a quarter of the British population lives in England.
A. A. northeastern
B. B. southeastern
C. C. northwestern
D. D. southwestern
【单选题】
English belongs to the group of Indo-European family of languages.
A. A. Celtic
B. B. Indo-Iranian
C. C. Germanic
D. D. Roman
【单选题】
The introduction of Christianity to Britain added the first element of words to English.
A. A. Danish and Finnish
B. B. Dutch and German
C. C. French and Italian
D. D. Latin and Greek
【单选题】
The evolution of Middle English was reinforced by the influence.
A. A. Norman
B. B. Dutch
C. C. German
D. D. Danish
【单选题】
In Britain, the parliamentary general election is held every years.
A. A. three
B. B. four
C. C. five
D. D. six
【单选题】
has a distinct legal system based on Roman law.
A. A. Wales
B. B. England
C. C. Scotland
D. D. Northern Ireland
【单选题】
Generally speaking, the British Parliament operates on a system.
A. A. single-party
B. B. two-party
C. C. three-party
D. D. multi-party
【单选题】
The policies of the Conservative Party areThe policies of the Conservative Party are characterized by pragmatism and .
A. A. government intervention
B. B. nationalization of enterprises
C. C. social reform
D. D. a belief in individualism
【单选题】
The Labor Party affected the British society greatly in that it .
A. A. set up the National Health Service
B. B. improved public transportation
C. C. abolished the old tax system
D. D. enhanced the economic development
【单选题】
The British economy achieved global dominance by the .
A. A. 1860s
B. B. 1870s
C. C. 1880s
D. D.1890s
【单选题】
In , the British Parliament passed two important acts to establish a welfare state.
A. A. 1945
B. B. 1946
C. C. 1947
D. D. 1948
【单选题】
The in the early 1970s worsened an already stagnant economy in Britain.
A. A. oil crisis
B. B. high inflation rates
C. C. large imports
D. D. unemployment problem
【单选题】
Of the following practices, does not belong to Thatcher’s social welfare reform.
A. A. reducing child benefits
B. B. shortening the unemployment benefits period
C. C. reducing the unemployment
D. D. lowering old age pensions
【单选题】
The Blair government has been successful in all the following aspects except .
A. A. limiting government spending
B. B. keeping inflation under control
C. C. reducing unemployment
D. D. reducing inequality
【单选题】
Britain has devoted of its land area to agriculture.
A. A. 54%
B. B. 64%
C. C. 74%
D. D.84%
【单选题】
Britain’s important fishing areas include all the following except .
A. A. the North Sea
B. B. the English Channelnnel
C. C. The sea area around Ireland
D. D. The sea area between Britain and Ireland
【单选题】
Coal mining industry in Britain provides of the energy consumed in the country.
A. A. 1/3
B. B. 1/4
C. C. 1/5
D. D. 2/3
【单选题】
The car industry in Britain in mostly .
A. A. foreign-owned
B. B. state-owned
C. C. joint-venture
D. D. privately-owned
【单选题】
Of the following sectors in Britain, has experienced spectacular growth since the end of Word War II.
A. A. agriculture
B. B. energy industry
C. C. service industry
D. D. manufacturing industry
【单选题】
Samuel Johnson’s dictionary was influential in establishing a standard form of .
A. A. grammar
B. B. handwriting
C. C. spelling
D. D. pronunciation
【单选题】
At present, nearly of the world’s population communicate in English.
A. A. half
B. B. a quarter
C. C. one third
D. D. one fifth
【单选题】
The attack on Rome ended the Roman occupation in Britain in 410.
A. A. Norman
B. B. Danish
C. C. Celtic
D. D. Germanic
【单选题】
By the late 7th century, became the dominant religion in England.
A. A. Celtic Christianity
B. B. Anglo-Saxon Christianity
C. C. Germanic Christianity
D. D. Roman Christianity
【单选题】
Westminster Abbey was built at the time of .
A. A. St. Augustine
B. B. Edward the Confessor
C. C. William the Conqueror
D. D. Alfred the Great
【单选题】
The marked the establishment of feudalism in England.
A. A. Viking invasion
B. B. signing of the Magna Carta
C. C. Norman Conquest
D. D. Adoption of common law
【单选题】
The end of the Wars of the Roses led to the rule of .
A. A. the House of Valois
B. B. the House of York
C. C. the House of Tudor
D. D. the House of Lancaster
【单选题】
The direct cause for the Religious Reformation was King Henry VIII’s effort to .
A. A. divorce his wife
B. B. break with Rome
C. C. support the Protestants
D. D. declare his supreme power over the church
【单选题】
The English Civil War broke out in 1642 between .
A. A. Protestants and Puritans
B. B. Royalists and Parliamentarians
C. C. nobles and peasants
D. D. aristocrats and Christians
【单选题】
was passed after the Glorious Revolution.
A. A. Bill of Rights
B. B. Act of Supremacy
C. C. Provisions of Oxford
D. D. Magna Carta
【单选题】
The Industrial Revolution was aThe Industrial Revolution was accomplished in Britain by the middle of the century.
A. A. 17th
B. B. 18th
C. C. 19th
D. D. 20th
【单选题】
Britain faced strong challenges in its global imperial dominance by the beginning of the century.
A. A. 17th
B. B. 18th
C. C. 19th
D. D. 20th
【单选题】
As a revising chamber, the House of Lords is expected to the House of Commons.
A. A. rival
B. B. complement
C. C. criticize
D. D. inspect
推荐试题
【判断题】
任何加工方法所得到的实际参数都不会绝对准确,从零件的功能来看,只要加工误差在零件图要求的误差范围之内,就认为保证了加工精度。任何加工方法所得到的实际参数都不会绝对准确,从零件的功能来看,只要加工误差在零件图要求的误差范围之内,就认为保证了加工精度。
A. 对
B. 错
【判断题】
在机械加工中,采用设计基准作为定位基准,这成为符合基准统一原则。在机械加工中,采用设计基准作为定位基准,这成为符合基准统一原则。
A. 对
B. 错
【判断题】
切削速度对切削温度的影响最大。切削速度对切削温度的影响最大。
A. 对
B. 错
【判断题】
冷作硬化可提高零件的耐磨性和疲劳强度。冷作硬化可提高零件的耐磨性和疲劳强度。
A. 对
B. 错
【判断题】
工件定位的任务首先是夹紧。工件定位的任务首先是夹紧。
A. 对
B. 错
【判断题】
数控加工技术是机械制造技术的一个分支。数控加工技术是机械制造技术的一个分支。
A. 对
B. 错
【判断题】
工件定位时,若夹具上的定位点不足六个,则肯定不会出现过定位。工件定位时,若夹具上的定位点不足六个,则肯定不会出现过定位。
A. 对
B. 错
【判断题】
工件定位时,影响加工要求的自由度必须限制。工件定位时,影响加工要求的自由度必须限制。
A. 对
B. 错
【判断题】
《机械制造技术》课程是国内各类高校本科机械类专业教学的传统且重要的专业技术基础课程之一。《机械制造技术》课程是国内各类高校本科机械类专业教学的传统且重要的专业技术基础课程之一。
A. 对
B. 错
【判断题】
箱体加工时一般都要用箱体上重要的孔作精基准。箱体加工时一般都要用箱体上重要的孔作精基准。
A. 对
B. 错
【判断题】
减小刀具的副后角可提高表面质量。减小刀具的副后角可提高表面质量。
A. 对
B. 错
【判断题】
当工件上两个加工表面之间的位置精度要求比较高时,可以采用两个加工表面互为基准反复加工的方法。当工件上两个加工表面之间的位置精度要求比较高时,可以采用两个加工表面互为基准反复加工的方法。
A. 对
B. 错
【判断题】
系统性误差很难彻底消除,而随机性误差则比较容易减小或消除。系统性误差很难彻底消除,而随机性误差则比较容易减小或消除。
A. 对
B. 错
【判断题】
车床的主运动是刀具的直线运动。车床的主运动是刀具的直线运动。
A. 对
B. 错
【判断题】
机床电机的功率应小于切削总功率。机床电机的功率应小于切削总功率。
A. 对
B. 错
【判断题】
锻压是利用金属的弹性变形,改变坯料的尺寸和形状,并改善其内部组织和力学性能。锻压是利用金属的弹性变形,改变坯料的尺寸和形状,并改善其内部组织和力学性能。
A. 对
B. 错
【判断题】
数控加工技术是机械制造技术的一个分支。数控加工技术是机械制造技术的一个分支。
A. 对
B. 错
【判断题】
机械制造技术课程是一门研究有关机械制造工艺与方法的综合性技术课程。机械制造技术课程是一门研究有关机械制造工艺与方法的综合性技术课程。
A. 对
B. 错
【判断题】
半精加工阶段是继续减小加工余量,为主要表面的精加工做准备的的阶段。半精加工阶段是继续减小加工余量,为主要表面的精加工做准备的的阶段。
A. 对
B. 错
【判断题】
滚齿加工时,滚齿机的切削主运动为分齿运动。滚齿加工时,滚齿机的切削主运动为分齿运动。
A. 对
B. 错
【判断题】
装配调整法为保证装配精度,又有固定调整法和可动调整法两种。装配调整法为保证装配精度,又有固定调整法和可动调整法两种。
A. 对
B. 错
【判断题】
碳钢质量的高低,主要根据钢中有害杂质硫和磷的含量多少来划分的。碳钢质量的高低,主要根据钢中有害杂质硫和磷的含量多少来划分的。
A. 对
B. 错
【判断题】
工件在夹具中定位时,按照定位原则最多限制6个自由度。工件在夹具中定位时,按照定位原则最多限制6个自由度。
A. 对
B. 错
【判断题】
切削过程主要是指被切削材料受挤压、变形和剥离的过程。切削过程主要是指被切削材料受挤压、变形和剥离的过程。
A. 对
B. 错
【判断题】
用压板压紧工件时,垫块的高度应稍低于工件。用压板压紧工件时,垫块的高度应稍低于工件。
A. 对
B. 错
【判断题】
焊接主要应用于型腔复杂尤其是内腔复杂的制件。焊接主要应用于型腔复杂尤其是内腔复杂的制件。
A. 对
B. 错
【判断题】
系统性误差很难彻底消除,而随机性误差则比较容易减小或消除。系统性误差很难彻底消除,而随机性误差则比较容易减小或消除。
A. 对
B. 错
【判断题】
常见的变速机构有塔轮变速机构、齿轮变速机构和离合器变速机构。常见的变速机构有塔轮变速机构、齿轮变速机构和离合器变速机构。
A. 对
B. 错
【判断题】
工件定位时,若夹具上的定位点不足六个,则肯定不会出现过定位。工件定位时,若夹具上的定位点不足六个,则肯定不会出现过定位。
A. 对
B. 错
【判断题】
定位基准需经加工,才能采用V形块定位。定位基准需经加工,才能采用V形块定位。
A. 对
B. 错
【判断题】
任何加工方法所得到的实际参数都不会绝对准确,从零件的功能来看,只要加工误差在零件图要求的误差范围之内,就认为保证了加工精度。任何加工方法所得到的实际参数都不会绝对准确,从零件的功能来看,只要加工误差在零件图要求的误差范围之内,就认为保证了加工精度。
A. 对
B. 错
【判断题】
模锻是在将加热到锻造温度的金属坯料放到固定在模锻设备上的锻模模具生产锻件的方法。模锻是在将加热到锻造温度的金属坯料放到固定在模锻设备上的锻模模具生产锻件的方法。
A. 对
B. 错
【判断题】
车削加工是在车床上利用工件相对于刀具旋转而对工件进行切削加工的方法。车削加工是在车床上利用工件相对于刀具旋转而对工件进行切削加工的方法。
A. 对
B. 错
【判断题】
工件上经刀具切削后形成的表面是过渡表面。工件上经刀具切削后形成的表面是过渡表面。
A. 对
B. 错
【判断题】
特种加工是指那些不属于传动加工工艺范畴的加工工艺方法。特种加工是指那些不属于传动加工工艺范畴的加工工艺方法。
A. 对
B. 错
【判断题】
工艺规程是规定产品或零部件制造工艺过程和操作方法等的工艺文件。工艺规程是规定产品或零部件制造工艺过程和操作方法等的工艺文件。
A. 对
B. 错
【判断题】
在制定零件的加工工艺规程时可以略过零件的工艺分析。在制定零件的加工工艺规程时可以略过零件的工艺分析。
A. 对
B. 错
【判断题】
刨削是以刨刀相对工件的往复直线运动与工作台的连续进给来实现切削加工的。刨削是以刨刀相对工件的往复直线运动与工作台的连续进给来实现切削加工的。
A. 对
B. 错
【判断题】
在粗加工的条件下,一般都会采用效率优先原则。在粗加工的条件下,一般都会采用效率优先原则。
A. 对
B. 错
【判断题】
轴类零件加工顺序安排大体如下:准备毛坯—正火—粗车—半精车—磨内圆。轴类零件加工顺序安排大体如下:准备毛坯—正火—粗车—半精车—磨内圆。
A. 对
B. 错
欢迎使用我爱刷题
×
微信搜索我爱刷题小程序
温馨提示
×
请在电脑上登陆“www.woaishuati.com”使用