【单选题】
Assuming a mirrored (RAID-1) object configuration, how many hosts must contribute storage in a non-stretched VMware vSAN cluster to satisfy the “Number of failures to tolerate” policy option?“n” is the desired “Number of failures to tolerate” value for all options.___
A. 2n+2
B. 2n
C. 2n+1
D. 3n
查看试卷，进入试卷练习
微信扫一扫，开始刷题
相关试题
【单选题】
An administrator must change the statistics level for short-term performance monitoring and wants to collect metrics for all counters, excluding minimum and maximum rollup values. What would be the statistics level?___
A. Level 3
B. Level 1
C. Level 2
D. Level 4
【单选题】
In a vSphere environment, two resource pools are created as shown in the Exhibit. Each VM is configured with 1 GB of memory. When the administrator tried to power on VM3, the operation failed. What action in the resource pool settings will allow VM3 to power on successfully?___
A. Deselect Expandable Memory Reservation
B. Increase Memory Reservation
C. Deselect Expandable CPU Reservation
D. Increase the CPU Reservation
【单选题】
Which network is used by vSphere HA when VMware vSAN is enabled?___
A. Management network
B. vSphere Replication network
C. vMotion network
D. VSAN network
【单选题】
Which statement is correct when migrating from a Windows vCenter Server to the vCenter Server Appliance 6.5?___
A. Migration deployments do not migrate local OS users from the source vCenter Server.
B. Migration deployments support DHCP on the source vCenter Server.
C. Migration deployments allow the source vCenter Server to remain powered on afterwards.
D. Migration deployments support custom ports for all services on the source vCenter Server.
【单选题】
How can failback of a recovered virtual machine in vSphere Replication be performed?___
A. No action required, because failback is automatically performed to the source site.
B. Configure a new replication in the reverse direction at the target site.
C. Disable or Stop the virtual machine replication on the source site.
D. Power off and unregister the virtual machine on the target site.
【单选题】
After upgrading the vSphere infrastructure and VMware Tools to version 6.5, the “Upgrade VM Compatibility” option is grayed out in the vSphere Web Client. (See Exhibit.) What must the administrator do to enable the VM compatibility upgrade?___
A. VMware Tools should be upgraded last.
B. Restart the ESXi server.
C. Uninstall VMware Tools.
D. Power off the virtual machine.
【单选题】
What availability mode does vCenter HA provide?___
A. Active-Passive
B. Active-Standby
C. Active-Active
D. Load-balanced
【单选题】
In which scenario will vSphere DRS balance resources when set to Fully Automated?___
A. Hosts with only shared storage
B. Hosts are part of a vSphere HA cluster
C. Power Management is set to Balanced on hosts
D. Hosts with shared or non-shared storage
【单选题】
What VMware technology can be used to move physical servers to the vSphere infrastructure?___
A. VMware vMotion
B. VMware Converter
C. VMware vCenter Server
D. OVF transport
【单选题】
Upgrading vCenter Server with Microsoft SQL database fails with the following error message: The DB User entered does not have the required permissions needed to install and configure vCenter Server with the selected DB. Please correct the following error(s): %sWhat could cause this error?___
A. incorrect ports open on SQL Server
B. incorrect database on the SQL server
C. incorrect compatibility mode on the SQL server
D. incorrect permission on SQL Server database
【单选题】
What is a potential downside of having more than four paths per datastore?___
A. limits the storage protocols
B. increases storage latency for VM
C. limits the path selection policies
D. limits the number of LUNs per host
【单选题】
Which feature facilitates the sharing of templates via vCenter Server?___
A. Content Library
B. OVF
C. folders
D. vApp
【单选题】
A vSphere Administrator is in the process of configuring replication for a virtual machine, but is not able to select the Recovery Point Objective (RPO) value of 5 minutes. Which statement could explain why the RPO value cannot be lower than 15 minutes?___
A. The OS quiescing option is selected for Replication options.
B. The virtual machine hardware version is not compatible.
C. The target and source sites use different types of datastores.
D. The target and source sites are not using VMFS 6.0 datastore.
【单选题】
What advanced parameter defines a custom isolation IP address for a vSphere HA cluster?___
A. das.usedefaultisolationaddress
B. das.isolationshutdowntimeout
C. fdm.isolationpolicydelaysec
D. das.isolationaddress
【单选题】
Which method is supported for backing up the virtual machine that contains vCenter Server?___
A. differential
B. incremental
C. full image
D. individual disks
【单选题】
A vSphere Administrator must ensure that a user is able to view and manage the system configuration in vSphere Web Client. In the vCenter Single Sign-On domain, which group should the user be a part of?___
A. SystemConfiguration.BashShellAdministrators
B. ComponentManager. Administrators
C. Administrators
D. SystemConfiguration.Administrators
【单选题】
What is the minimum number of hosts that must contribute capacity to a non-ROBO single site VMware vSAN cluster?___
【单选题】
Which guest operating system supports PVRDMA?___
A. Windows (32-Bit)
B. Linux (32-Bit)
C. Windows (64-Bit)
D. Linux (64-Bit)
【单选题】
What is the correct way to replace the certificate on an existing vCenter Server that is part of a vCenter HA configuration?___
A. Put the vCenter HA in Maintenance mode, replace the certificate, exit Maintenance mode.
B. Shut down Passive and Witness nodes and replace the certificate on the Active node.
C. Remove the Passive and Witness nodes, replace the certificate, reconfigure the cluster.
D. Replace the certificate while all nodes are participating in the cluster.
【单选题】
The vSphere Data Protection performance analysis results in the “Conditionally Passed” status. What can cause this condition?___
A. The results did not meet the minimum performance expectations.
B. The read, write, and seek tests were successful.
C. The read and write tests were successful but the seek test failed.
D. The read and write tests were successful but the seek test skipped.
【单选题】
A vSphere Administrator wants to reserve 0.5 Gbps for virtual machines on each uplink on a disturbed switch that has 10 uplinks. What is the quota that should be reserved for the network resource pool?___
A. 10 Gbps
B. 5 Gbps
C. 100 Gbps
D. 0.5 Gbps
【单选题】
A vSphere administrator manages a cluster which includes critical and non-critical virtual machines. The cluster requires different permissions for contractors and non-contractors. How can the administrator exclude the contractor group from some of the critical VMs?___
A. Apply permission for both contractors and non-contractors on the cluster level.
B. Apply permission for both contractors and non-contractors on the cluster level. Remove permission on the critical VMs for contractors.
C. Remove permission for contractors on the cluster level. Apply permission on the critical VMs for noncontractors.
D. Apply permission for both contractors and non-contractors on the VMs. Remove permission on the critical VMs for contractors.
【单选题】
In an ESXi 6.5 cluster only "NFS datastore has running or registered virtual machines" returns. A vSphere HA cluster with four hosts has admission control configured to tolerate one host failure. Which statement is true if a fifth host is added?___
A. CPU and Memory capacity will be set to 50%.
B. CPU and Memory capacity will be set to 30%.
C. CPU and Memory capacity will be set to 25%.
D. CPU and Memory capacity will be set to 20%.
【单选题】
Which command can be run to troubleshoot connectivity problems with vmkernal network interfaces?___
A. esxcli network
B. vmkping
C. net-status
D. vicfg-vmknic
【单选题】
What counter should an administrator check to determine if a virtual machine is ballooning?___
A. swapinRate
B. vmmemctltarget
C. swapped
D. vmmemctl
【单选题】
By default, how often is the vCenter vpx user password automatically changed?___
A. 15 days
B. 60 days
C. 30 days
D. 45 days
【单选题】
Which metric in the Exhibit would identify high latency for a virtual machine operating system?___
A. QAVG/cmd
B. KAVG/cmd
C. DAVG/cmd
D. GAVG/cmd
【单选题】
What VM Monitoring setting would ensure that the failure interval for a virtual machine is defined as 120 seconds?___
A. High
B. Normal
C. Low
D. Medium
【单选题】
The business managers have asked the IT administrator to ensure configuration compliance in the vSphere infrastructure. The IT administrator wants to use Host Profiles to accomplish this, but is unable to do so. Why is the administrator unable to use Host Profiles?___
A. The infrastructure uses a vSphere Standard license.
B. The infrastructure has servers with various CPU families.
C. The user has only the “Administrator” role.
D. Host Profiles apply only to storage settings.
【单选题】
What is the result of a “Consolidate” action on a virtual machine?___
A. All snapshots on the virtual machines will be deleted.
B. The virtual machine will be reverted to its last snapshot.
C. Redundant delta disks will be combined and deleted.
D. A new snapshot with memory state will be created.
【单选题】
A Telco customer is implementing NFV using vSphere as the virtualization platform. Which feature can help achieve a high packet rate with lower CPU consumption?___
A. Network I/O Control
B. SplitRX
C. ERSPAN
D. LACP
【单选题】
What is the VMware-recommended best practice for Fibre Channel zoning?___
A. soft zoning
B. single-initiator-multiple-target zoning
C. single-initiator zoning
D. single-initiator-single-target zoning
【单选题】
How can a vSphere administrator ensure that a set of virtual machines run on different hosts in a DRS cluster?___
A. Use a VM-Host affinity rule.
B. Add the VMs to a vApp.
C. Use a VM-VM affinity rule.
D. Place the VMs in different folders.
【单选题】
vCenter Server Appliance Instance can be backed up using which Client Interface?___
A. vSphere Client Interface
B. vSphere Web Client Interface
C. VMware Host Client Interface
D. Virtual Appliance Management Interface
【单选题】
What tool can capture network traffic at the uplinks, or vSwitch, or virtual port levels?___
A. tcpdump-uw
B. wireshark
C. pktcap-uw
D. pcap
【单选题】
Which storage feature always requires the use of third-party software on ESXi?___
A. Hardware Acceleration for NAS devices
B. VVOL
C. Hardware Acceleration for Block
D. evices
【单选题】
An ESXi host's VMCA-Signed certificate has expired. How can the certificate be renewed?___
A. In the vSphere Web Client, browse to the host in question. Click the Manage tab and select settings. Select System and click Certificate, then click the Renew button.
B. In the vSphere Web Client, browse to the host in question. Click the Manage tab and select settings. Select System and click Certificate, then click the Refresh CA Certificates button.
C. Run the command /sbin/generate-certificates on the affected host.
D. Disconnect the host from vCenter Server and reconnect it.
【单选题】
Which is the correct order for upgrading vSphere components?___
A. vCenter Server, ESXi hosts, VMware Tools, Virtual Machine hardware
B. VMware Tools, Virtual Machine hardware, ESXi hosts, vCenter Server
C. vCenter Server, Virtual Machine hardware, VMware tools, ESXi hosts
D. ESXi hosts, vCenter Server, Virtual Machine hardware, VMware Tools
【单选题】
Which iSCSI initiator type can be used with any network interface card?___
A. Software iSCSI initiator
B. Software FCoE adapter
C. Hardware Independent iSCSI initiator
D. Hardware Dependent iSCSI initiator
【单选题】
An administrator is attempting to power on a virtual machine with 32GB of memory. The operation fails with the following error: <Could not power on VM: No space left on device> <Checking the space on the virtual machine's datastore, there is 30GB free.> Which action would allow the VM to power on?___
A. Set a 2GB memory reservation on the VM.
B. Mount the virtual disk from the affected VM on to another virtual machine and free up space from within the OS.
C. Enable vSphere HD admission control on the cluster in which the VM resides.
D. Set a 2GB memory limit on the VM.
推荐试题
【单选题】
37共集电极放大电路中Re的负反馈组态是___。
A. 电压串联负反馈
B. 电流串联负反馈
C. 电压并联负反馈
【单选题】
38为了使放大器带负载能力强，一般引入___负反馈。
【单选题】
41为了提高三极管放大电路的输入电阻，采用___负反馈 i=i1+i2
【单选题】
42为了稳定输出电流，采用___负反馈。
【单选题】
43为了改善放大器的动态性能，应该引入___电路。
A. 直流负反馈
B. 交流负反馈
C. 电压负反馈
D. 电流负反馈
【单选题】
44为了稳定放大器的静态工作点，应该引入___电路。
A. 直流负反馈
B. 交流负反馈
C. 电压负反馈
D. 电流负反馈
【单选题】
45共模抑制比是差分放大电路的一个主要技术指标，它反映放大电路___能力。
A. 放大差模抑制共模
B. 输入电阻高
C. 输出电阻低
【单选题】
46差分放大电路是为了___而设置的。
A. 稳定Au
B. 放大信号
C. 抑制零点漂移
【单选题】
47分析运放的“虚短”是指是___。
A. U-≈U+
B. I-≈I+≈0
C. U0=Ui
D. U-≈U+≈0
【单选题】
48分析运放的“虚断”是指是___。
A. U-≈U+
B. I-≈I+≈0
C. I-≈I+
D. U-≈U+≈0
【单选题】
51两级放大电路，Au1=-40，Au2=-50，若输入电压U1=5mv，则输出电压Uo为 ___
A. -200mv；
B. -250mV；
C. 10V；
D. 100V
【单选题】
52通用型集成运放的输入级多采用___。
A. 共基接法
B. 共集接法
C. 共射接法
D. 差分接法
【单选题】
53理想运放的两个重要性质是___。
A. 虚短与虚地
B. 虚断与虚短
C. 断路与短路
【单选题】
54振荡器的输出信号最初由___而来的。
A. 基本放大器
B. 选频网络
C. 干扰或噪声信号
【单选题】
55产生正弦波自激震荡的稳定条件是___。
A. 引入正反馈
B. |AF|≥1
C. AF=1
【单选题】
56从结构上来看，正弦振荡电路是一个 ___ 。
A. 有输入信号的负反馈放大器；
B. 没有输入信号的带选频网络的正反馈放大器；
C. 没有输入信号的不带选频网络的正反馈放大器。
【单选题】
57对频率稳定度要求较高的振荡器，要采用： ___ 。
A. LC振荡电路；
B. RC振荡电路；
C. RL振荡电路；
D. 石英晶体振荡电路。
【单选题】
58在甲类、乙类、甲乙类放大电路中，其导通角分别为___
A. 小于180 O、180 O、360O
B. 360O、180 O、小于180 O。
C. 180 O、小于180 O、360O
【单选题】
W78XX系和列W79XX系列引脚对应关系为 ___ 。
A. 一致；
B. 1脚与3脚对调，2脚不变；
C. 1、2对调。
【单选题】
60两个β相同的晶体管组成复合管后，其电流放大系数约为 ___ 。
【单选题】
1三极管的开关特性是___。
A. 截止相当于开关接通
B. 放大相当于开关接通
C. 饱和相当于开关接通
D. 截止相当于开关断开，饱和相当于开关接通
【单选题】
2数字集成门电路，目前生产最多应用最普遍的门电路是___
【单选题】
3由一个三极管组成的基本门电路是___。
【单选题】
4在遥测系统中，需通过___把非电量的变化转变为电信号。
A. 电阻器、
B. 电容器、
C. 传感器、
D. 晶体管
【单选题】
5半导体发光数码管由___个条状的发光二极管组成。
【单选题】
6“有0出1，全1出0”属于___
A. 与逻辑
B. 或逻辑
C. 非逻辑
D. 与非逻辑
【单选题】
7二进制数11101转化成十进制数为___
【单选题】
8TTL系列集成芯片工作电源电压的典型值是___。
A. 18V
B. 5V
C. 3V
D. 10V
【单选题】
10以下表达式中符合逻辑运算法则的是___。
A. 1+1=10
B. A+A=2A
C. A+=1.
D. A·=1
【单选题】
11对于TTL与非门闲置输入端的处理，不可以___
A. 与有用输入端并联
B. 通过电阻3kΩ接电源
C. 接地
D. 接电源
【单选题】
12十线/四线优先编码器74LS147所用的输出代码为___。
A. 5421BCD码
B. 格雷码
C. 8421BCD码
D. 余3码
【单选题】
13为实现“线与”逻辑功能，应选用___
A. OC门
B. 与门
C. 异或门
D. 同或门
【单选题】
14和逻辑式A+ABC相等的式子是___
【单选题】
15逻辑函数的表示方法中具有唯一性的是___
A. 真值表
B. 表达式
C. 逻辑图
D. 卡诺图
【单选题】
16与模拟电路相比，数字电路主要的优点是___。
A. 容易设计
B. 通用性强
C. 抗干扰能力强
【单选题】
17某门电路的输入输出波形如图所示，试问此逻辑门的功能是___。
【单选题】
18以下电路中常用于总线应用的有___。
A. TSL门
B. OC门
C. 漏极开路门
D. CMOS与非门
【单选题】
逻辑表达式Y=AB可以用___实现。
A. 正或门
B. 正非门
C. 正与门
D. 负或门
【单选题】
20TTL电路在正逻辑系统中，以下各种输入中___相当于输入逻辑“0”。
A. 悬空
B. 通过电阻2.7kΩ接电源
C. 通过电阻2.7kΩ接地
D. 通过电阻510Ω接地
