【单选题】
A vSphere Administrator is in the process of configuring replication for a virtual machine, but is not able to select the Recovery Point Objective (RPO) value of 5 minutes. Which statement could explain why the RPO value cannot be lower than 15 minutes?___
A. The OS quiescing option is selected for Replication options.
B. The virtual machine hardware version is not compatible.
C. The target and source sites use different types of datastores.
D. The target and source sites are not using VMFS 6.0 datastore.
查看试卷，进入试卷练习
微信扫一扫，开始刷题
相关试题
【单选题】
What advanced parameter defines a custom isolation IP address for a vSphere HA cluster?___
A. das.usedefaultisolationaddress
B. das.isolationshutdowntimeout
C. fdm.isolationpolicydelaysec
D. das.isolationaddress
【单选题】
Which method is supported for backing up the virtual machine that contains vCenter Server?___
A. differential
B. incremental
C. full image
D. individual disks
【单选题】
A vSphere Administrator must ensure that a user is able to view and manage the system configuration in vSphere Web Client. In the vCenter Single Sign-On domain, which group should the user be a part of?___
A. SystemConfiguration.BashShellAdministrators
B. ComponentManager. Administrators
C. Administrators
D. SystemConfiguration.Administrators
【单选题】
What is the minimum number of hosts that must contribute capacity to a non-ROBO single site VMware vSAN cluster?___
【单选题】
Which guest operating system supports PVRDMA?___
A. Windows (32-Bit)
B. Linux (32-Bit)
C. Windows (64-Bit)
D. Linux (64-Bit)
【单选题】
What is the correct way to replace the certificate on an existing vCenter Server that is part of a vCenter HA configuration?___
A. Put the vCenter HA in Maintenance mode, replace the certificate, exit Maintenance mode.
B. Shut down Passive and Witness nodes and replace the certificate on the Active node.
C. Remove the Passive and Witness nodes, replace the certificate, reconfigure the cluster.
D. Replace the certificate while all nodes are participating in the cluster.
【单选题】
The vSphere Data Protection performance analysis results in the “Conditionally Passed” status. What can cause this condition?___
A. The results did not meet the minimum performance expectations.
B. The read, write, and seek tests were successful.
C. The read and write tests were successful but the seek test failed.
D. The read and write tests were successful but the seek test skipped.
【单选题】
A vSphere Administrator wants to reserve 0.5 Gbps for virtual machines on each uplink on a disturbed switch that has 10 uplinks. What is the quota that should be reserved for the network resource pool?___
A. 10 Gbps
B. 5 Gbps
C. 100 Gbps
D. 0.5 Gbps
【单选题】
A vSphere administrator manages a cluster which includes critical and non-critical virtual machines. The cluster requires different permissions for contractors and non-contractors. How can the administrator exclude the contractor group from some of the critical VMs?___
A. Apply permission for both contractors and non-contractors on the cluster level.
B. Apply permission for both contractors and non-contractors on the cluster level. Remove permission on the critical VMs for contractors.
C. Remove permission for contractors on the cluster level. Apply permission on the critical VMs for noncontractors.
D. Apply permission for both contractors and non-contractors on the VMs. Remove permission on the critical VMs for contractors.
【单选题】
In an ESXi 6.5 cluster only "NFS datastore has running or registered virtual machines" returns. A vSphere HA cluster with four hosts has admission control configured to tolerate one host failure. Which statement is true if a fifth host is added?___
A. CPU and Memory capacity will be set to 50%.
B. CPU and Memory capacity will be set to 30%.
C. CPU and Memory capacity will be set to 25%.
D. CPU and Memory capacity will be set to 20%.
【单选题】
Which command can be run to troubleshoot connectivity problems with vmkernal network interfaces?___
A. esxcli network
B. vmkping
C. net-status
D. vicfg-vmknic
【单选题】
What counter should an administrator check to determine if a virtual machine is ballooning?___
A. swapinRate
B. vmmemctltarget
C. swapped
D. vmmemctl
【单选题】
By default, how often is the vCenter vpx user password automatically changed?___
A. 15 days
B. 60 days
C. 30 days
D. 45 days
【单选题】
Which metric in the Exhibit would identify high latency for a virtual machine operating system?___
A. QAVG/cmd
B. KAVG/cmd
C. DAVG/cmd
D. GAVG/cmd
【单选题】
What VM Monitoring setting would ensure that the failure interval for a virtual machine is defined as 120 seconds?___
A. High
B. Normal
C. Low
D. Medium
【单选题】
The business managers have asked the IT administrator to ensure configuration compliance in the vSphere infrastructure. The IT administrator wants to use Host Profiles to accomplish this, but is unable to do so. Why is the administrator unable to use Host Profiles?___
A. The infrastructure uses a vSphere Standard license.
B. The infrastructure has servers with various CPU families.
C. The user has only the “Administrator” role.
D. Host Profiles apply only to storage settings.
【单选题】
What is the result of a “Consolidate” action on a virtual machine?___
A. All snapshots on the virtual machines will be deleted.
B. The virtual machine will be reverted to its last snapshot.
C. Redundant delta disks will be combined and deleted.
D. A new snapshot with memory state will be created.
【单选题】
A Telco customer is implementing NFV using vSphere as the virtualization platform. Which feature can help achieve a high packet rate with lower CPU consumption?___
A. Network I/O Control
B. SplitRX
C. ERSPAN
D. LACP
【单选题】
What is the VMware-recommended best practice for Fibre Channel zoning?___
A. soft zoning
B. single-initiator-multiple-target zoning
C. single-initiator zoning
D. single-initiator-single-target zoning
【单选题】
How can a vSphere administrator ensure that a set of virtual machines run on different hosts in a DRS cluster?___
A. Use a VM-Host affinity rule.
B. Add the VMs to a vApp.
C. Use a VM-VM affinity rule.
D. Place the VMs in different folders.
【单选题】
vCenter Server Appliance Instance can be backed up using which Client Interface?___
A. vSphere Client Interface
B. vSphere Web Client Interface
C. VMware Host Client Interface
D. Virtual Appliance Management Interface
【单选题】
What tool can capture network traffic at the uplinks, or vSwitch, or virtual port levels?___
A. tcpdump-uw
B. wireshark
C. pktcap-uw
D. pcap
【单选题】
Which storage feature always requires the use of third-party software on ESXi?___
A. Hardware Acceleration for NAS devices
B. VVOL
C. Hardware Acceleration for Block
D. evices
【单选题】
An ESXi host's VMCA-Signed certificate has expired. How can the certificate be renewed?___
A. In the vSphere Web Client, browse to the host in question. Click the Manage tab and select settings. Select System and click Certificate, then click the Renew button.
B. In the vSphere Web Client, browse to the host in question. Click the Manage tab and select settings. Select System and click Certificate, then click the Refresh CA Certificates button.
C. Run the command /sbin/generate-certificates on the affected host.
D. Disconnect the host from vCenter Server and reconnect it.
【单选题】
Which is the correct order for upgrading vSphere components?___
A. vCenter Server, ESXi hosts, VMware Tools, Virtual Machine hardware
B. VMware Tools, Virtual Machine hardware, ESXi hosts, vCenter Server
C. vCenter Server, Virtual Machine hardware, VMware tools, ESXi hosts
D. ESXi hosts, vCenter Server, Virtual Machine hardware, VMware Tools
【单选题】
Which iSCSI initiator type can be used with any network interface card?___
A. Software iSCSI initiator
B. Software FCoE adapter
C. Hardware Independent iSCSI initiator
D. Hardware Dependent iSCSI initiator
【单选题】
An administrator is attempting to power on a virtual machine with 32GB of memory. The operation fails with the following error: <Could not power on VM: No space left on device> <Checking the space on the virtual machine's datastore, there is 30GB free.> Which action would allow the VM to power on?___
A. Set a 2GB memory reservation on the VM.
B. Mount the virtual disk from the affected VM on to another virtual machine and free up space from within the OS.
C. Enable vSphere HD admission control on the cluster in which the VM resides.
D. Set a 2GB memory limit on the VM.
【单选题】
An administrator attempts to manually reclaim space on thin-provisioned VMFS6 volumes but finds that no additional space is being recovered. Which could be causing this?___
A. vSphere 6.5 does not support manual UNMAP.
B. The manual UNMAP operation has been moved to the vSphere web client.
C. The VASA version is use is incompatible.
D. UNMAP is automated for VMFS6.
【单选题】
An administrator has upgraded to vSphere 6.5 and also wants to use Kerberos authentication for NFS. Which can be done to the existing NFSv3 volumes to enable this feature?___
A. Perform a storage rescan on VMFS volumes.
B. Unmount the NFSv3 datastore, and then mount as NFSv4.1 datastore.
C. Nothing. All NFSv3 mounted datastores are upgraded automatically during vSphere upgrades.
D. Perform a scan of new storage devices.
【单选题】
An administrator wants to restore the vCenter Server Appliance 6.5 from backup. Where can this be accomplished?___
A. from the ESXi Host Client
B. from the VMware vSphere Appliance Management Interface
C. from within the VMware vSphere Web Client
D. from the vCenter Server Appliance Installer
【单选题】
The administrator wants to power on VM-K2, which has a 2GHz CPU reservation. VM-M1, VM-M2, and VM-K1 are all powered on. VM-K2 is not powered on. The exhibit shows the parent and child resource reservations. If Resource Pool RP-KID is configured with an expandable reservation, which statement is true?___
A. VM-K2 will be unable to power on because there are insufficient resources.
B. VM-K2 will be able to power on since resource pool RP-KID has 2GHz available.
C. VM-K2 will be unable to power on because only 2GHz are reserved for RP-KID.
D. VM-K2 will receive resource priority and will be able to power on this scenario.
【单选题】
Which is the block size on the VMFS6 datastore?___
A. All small and large file blocks are 8MB.
B. All small and large file blocks are 1MB.
C. Small file blocks are 512KB. large file blocks are 64MB.
D. Small file blocks are 1MB, large file blocks are 512MB.
【单选题】
When installing vCenter Converter Standalone, why must an administrator perform a client-server installation instead of a local installation?___
A. to manage conversion tasks remotely
B. to convert virtual machines as well as physical machines
C. to allow installation of the Converter agent on remote source machines
D. to hot clone physical or virtual machines
【单选题】
Which is required by vCenter Converter Standalone to convert a physical Red Hat Enterprise Linux 7 machine to a virtual machine?___
A. The Linux machine must be powered off.
B. The Linux machine must have the SSH daemon started.
C. The Linux machine must use a static IP address.
D. The Linux machine must have a fully-qualified domain name.
【单选题】
An administrator is troubleshooting network communications between a vCenter Server and an ESXi 6.5 host. Which log shows the related events between these components?___
A. /var/log/fdm.log
B. /var/log/vpxa.log
C. /var/log/hostd.log
D. /var/log/auth.log
【单选题】
An administrator has recently upgraded from vSphere 6.0 to 6.5, and can no longer see the software iSCSI named vmhba33. Which could be the reason for this?___
A. The upgrade has changed the vmhba name.
B. vSphere 6.5 automates iSCSI configurations.
C. vSphere 6.5 no longer supports software iSCSI.
D. The upgrade has deleted the vmhba.
【单选题】
An administrator is trying to vMotion a VM from his datacenter to a recovery site. Which is the maximum allowed RTT (Round-Trip Time) latency between source and destination host?___
A. 100 milliseconds
B. 150 milliseconds
C. 15 milliseconds
D. 10 milliseconds
【单选题】
Which is required for configuring iSCSI Software Adapter network port binding?___
A. VMkernel of the iSCSI traffic must be load balanced using Route based on IP Hash algorithm.
B. VMkernel of the iSCSI traffic must be load balanced using Route based on Source Virtual Port ID algorithm.
C. VMkernel of the iSCSI traffic must be load balanced using Route based on Source MAC Hash algorithm.
D. VMkernel of the iSCSI traffic must be bound to only one active network adapter.
【单选题】
In vSphere Data Protection 6.1, which is the function of a Backup Verification job?___
A. None. Backup Verification job is not a feature of vSphere Data Protection
B. It is a manual task -Power it on -Verify the guest OS -Check started applications
C. It is an automatic process -Restore a virtual machine -Power it on -Verify that the guest OS is booted by communicating with the Backup Verification agent
D. It is an automatic process -Restore a virtual machine -Power it on -Verify that the guest OC is booted by detecting the VMware ToolsTM "heartbeats"
【单选题】
An administrator has enabled vSphere Distributed Switch Health Check. The hosts connected to that Distributed Switch all display an alert:< vSphere Distributed Switch MTU supported status > .The administrator has all of the VMkernel ports MTU sizes set to 1600. Which action will remedy this problem?___
A. Configure the Distributed Switch to MTU 9100.
B. Disconnect and reconnect the physical network cable.
C. Configure the physical switch to MTU 1600.
D. Disable the Distributed Switch MTU.
推荐试题
【单选题】
555定时器构成的典型应用中不包含___电路。
A. 多谐振荡
B. 施密特振荡
C. 单稳态振荡
D. 存储器
【单选题】
下列不属于555定时器构成的单稳态触发器的典型应用是___。
A. 脉冲定时
B. 脉冲延时
C. 脉冲整形
D. 计数器
【单选题】
555定时器构成的多谐振荡电路的脉冲频率由___决定。
A. 输入信号
B. 输出信号
C. 电路充放电电阻及电容
D. 555定时器结构
【单选题】
555定时器构成的单稳态触发器单稳态脉宽由___决定。
A. 输入信号
B. 输出信号
C. 电路电阻及电容
D. 555定时器结构
【单选题】
当74LS94的控制信号为10时，该集成移位寄存器处于___状态。
A. 左移
B. 右移
C. 保持
D. 并行置数
【单选题】
当74LS94的控制信号为11时，该集成移位寄存器处于___状态。
A. 左移
B. 右移
C. 保持
D. 并行置数
【单选题】
当74LS94的00经非门的输出与SL相连时，电路实现的功能为___。
A. 左移扭环形计数器
B. 右移扭环形计数器
C. 保持
D. 并行置数
【单选题】
移位寄存器可分为___。
A. 左移
B. 右移
C. 可逆
D. 以上都是
【单选题】
当74LS94的控制信号为01时，该集成移位寄存器处于___状态。
A. 左移
B. 右移
C. 保持
D. 并行置数
【单选题】
当74LS94的控制信号为00时，该集成移位寄存器处于___状态。
A. 左移
B. 右移
C. 保持
D. 并行置数
【单选题】
当74L594的Q3经非门的输出与Sr相连时，电路实现的功能为___。
A. 左移扭环形计数器
B. 右移扭环形计数器
C. 保持
D. 并行置数
【单选题】
集成显示译码器是按___来显示的。
A. 高电平
B. 低电平
C. 字型
D. 低阻
【单选题】
集成译码器74[S42是___译码器。
A. 变量
B. 显示
C. 符合
D. 二一十进制
【单选题】
其八个输出为___
A. 高电平
B. 低电平
C. 高阻
D. 低阻
【单选题】
当集成译码器74LSl38的3个使能端都满足要求时，其输出端为___有效。
A. 高电位
B. 低电位
C. 高阻
D. 低阻
【单选题】
集成译码器与七段发光二极管构成___译码器。
A. 变量
B. 逻辑状态
C. 数码显示
D. 数值
【单选题】
集成译码器74LS48可点亮___显示器。
A. 共阴七段
B. 共阳七段
C. 液晶
D. 等离子
【单选题】
集成译码器74LS138与适当门电路配合可构成___功能。
A. 全加法器
B. 计数器
C. 编码器
D. 存储器
【单选题】
集成译码器的___状态不对时，译码器无法工作。
A. 输入端
B. 输出端
C. 清零端
D. 使能端
【单选题】
集成译码器74LS47可点亮___显示器。
A. 共阴七段
B. 共阳七段
C. 液晶
D. 等离子
【单选题】
集成计数器74LS161是___计数器。
A. 二进制同步可预置
B. 二进制异步可预置
C. 二进制同步可清零
D. 二进制异步可清零
【单选题】
集成计数器74LS161是___计数器。
A. 四位二进制加法
B. 四位二进制减法
C. 五位二进制加法
D. 三位二进制加法
【单选题】
集成二一十进制计数器74LS90是___计数器。
A. 异步二一五一十进制加法
B. 同步十进制加法
C. 异步十进制减法
D. 同步十进制可逆
【单选题】
一片集成二一十进制计数器74LS90可构成___进制计数器。
A. 2至10间的任意
B. 5
C. 10
D. 2
【单选题】
一片集成二一十进制计数器74LS160可构成___进制计数器。
A. 2至10间的任意
B. 5
C. 10
D. 2
【单选题】
两片集成计数器74LS192，最多可构成___进制计数器。
【单选题】
两片集成计数器74LS161，最多可构成___进制计数器。
A. 256
B. 16
C. 200
D. 100
【单选题】
集成运放电路___，会损坏运放。
A. 两输入端电压过高
B. 输入电流过大
C. 两输入端短接
D. 两输入端接反
【单选题】
集成运放电路引脚如插反，会___，会损坏运放。
【单选题】
集成运放电路的电源端可外接___，防止其极性接反。
A. 三极管
B. 二极管
C. 场效应管
D. 稳压管
【单选题】
集成运放电路___，会损坏运放。
A. 电源数值过大
B. 输入接反
C. 输出端开路
D. 输出端与输入端直接相连
【单选题】
集成运放电路___，会损坏运放。
A. 输出负载过大
B. 输出开端
C. 输出端开路
D. 输出端与输入端直接相连
【单选题】
微分集成运放电路反馈元件采用的是___元件。
【单选题】
积分集成运放电路反馈元件采用的是___元件。
【单选题】
集成运放电路的两输入端外接___，防止输入信号过大而损坏元件。
A. 三极管
B. 反并联二极管
C. 场效应管
D. 稳压管
【单选题】
集成运放电路的输出端外接___，防止负载过大而损坏元件。
A. 三极管
B. 二极管
C. 场效应管
D. 反串稳压管
【单选题】
集成编码器的___状态不对时，编码器无法工作。
A. 输入端
B. 输出端
C. 清零端
D. 控制端
【单选题】
集成编码器无法工作，首先应检查___的状态。
A. 输入端
B. 输出端
C. 清零端
D. 控制端
【单选题】
集成译码器无法工作，首先应检查___的状态。
A. 输人端
B. 输出端
C. 清零端
D. 使能端
【单选题】
集成或非门被封锁，应检查其多余引脚是否接了___。
A. 悬空
B. 高电平
C. 低电平
D. 并接
