【单选题】
The business managers have asked the IT administrator to ensure configuration compliance in the vSphere infrastructure. The IT administrator wants to use Host Profiles to accomplish this, but is unable to do so. Why is the administrator unable to use Host Profiles?___
A. The infrastructure uses a vSphere Standard license.
B. The infrastructure has servers with various CPU families.
C. The user has only the “Administrator” role.
D. Host Profiles apply only to storage settings.
查看试卷，进入试卷练习
微信扫一扫，开始刷题
相关试题
【单选题】
What is the result of a “Consolidate” action on a virtual machine?___
A. All snapshots on the virtual machines will be deleted.
B. The virtual machine will be reverted to its last snapshot.
C. Redundant delta disks will be combined and deleted.
D. A new snapshot with memory state will be created.
【单选题】
A Telco customer is implementing NFV using vSphere as the virtualization platform. Which feature can help achieve a high packet rate with lower CPU consumption?___
A. Network I/O Control
B. SplitRX
C. ERSPAN
D. LACP
【单选题】
What is the VMware-recommended best practice for Fibre Channel zoning?___
A. soft zoning
B. single-initiator-multiple-target zoning
C. single-initiator zoning
D. single-initiator-single-target zoning
【单选题】
How can a vSphere administrator ensure that a set of virtual machines run on different hosts in a DRS cluster?___
A. Use a VM-Host affinity rule.
B. Add the VMs to a vApp.
C. Use a VM-VM affinity rule.
D. Place the VMs in different folders.
【单选题】
vCenter Server Appliance Instance can be backed up using which Client Interface?___
A. vSphere Client Interface
B. vSphere Web Client Interface
C. VMware Host Client Interface
D. Virtual Appliance Management Interface
【单选题】
What tool can capture network traffic at the uplinks, or vSwitch, or virtual port levels?___
A. tcpdump-uw
B. wireshark
C. pktcap-uw
D. pcap
【单选题】
Which storage feature always requires the use of third-party software on ESXi?___
A. Hardware Acceleration for NAS devices
B. VVOL
C. Hardware Acceleration for Block
D. evices
【单选题】
An ESXi host's VMCA-Signed certificate has expired. How can the certificate be renewed?___
A. In the vSphere Web Client, browse to the host in question. Click the Manage tab and select settings. Select System and click Certificate, then click the Renew button.
B. In the vSphere Web Client, browse to the host in question. Click the Manage tab and select settings. Select System and click Certificate, then click the Refresh CA Certificates button.
C. Run the command /sbin/generate-certificates on the affected host.
D. Disconnect the host from vCenter Server and reconnect it.
【单选题】
Which is the correct order for upgrading vSphere components?___
A. vCenter Server, ESXi hosts, VMware Tools, Virtual Machine hardware
B. VMware Tools, Virtual Machine hardware, ESXi hosts, vCenter Server
C. vCenter Server, Virtual Machine hardware, VMware tools, ESXi hosts
D. ESXi hosts, vCenter Server, Virtual Machine hardware, VMware Tools
【单选题】
Which iSCSI initiator type can be used with any network interface card?___
A. Software iSCSI initiator
B. Software FCoE adapter
C. Hardware Independent iSCSI initiator
D. Hardware Dependent iSCSI initiator
【单选题】
An administrator is attempting to power on a virtual machine with 32GB of memory. The operation fails with the following error: <Could not power on VM: No space left on device> <Checking the space on the virtual machine's datastore, there is 30GB free.> Which action would allow the VM to power on?___
A. Set a 2GB memory reservation on the VM.
B. Mount the virtual disk from the affected VM on to another virtual machine and free up space from within the OS.
C. Enable vSphere HD admission control on the cluster in which the VM resides.
D. Set a 2GB memory limit on the VM.
【单选题】
An administrator attempts to manually reclaim space on thin-provisioned VMFS6 volumes but finds that no additional space is being recovered. Which could be causing this?___
A. vSphere 6.5 does not support manual UNMAP.
B. The manual UNMAP operation has been moved to the vSphere web client.
C. The VASA version is use is incompatible.
D. UNMAP is automated for VMFS6.
【单选题】
An administrator has upgraded to vSphere 6.5 and also wants to use Kerberos authentication for NFS. Which can be done to the existing NFSv3 volumes to enable this feature?___
A. Perform a storage rescan on VMFS volumes.
B. Unmount the NFSv3 datastore, and then mount as NFSv4.1 datastore.
C. Nothing. All NFSv3 mounted datastores are upgraded automatically during vSphere upgrades.
D. Perform a scan of new storage devices.
【单选题】
An administrator wants to restore the vCenter Server Appliance 6.5 from backup. Where can this be accomplished?___
A. from the ESXi Host Client
B. from the VMware vSphere Appliance Management Interface
C. from within the VMware vSphere Web Client
D. from the vCenter Server Appliance Installer
【单选题】
The administrator wants to power on VM-K2, which has a 2GHz CPU reservation. VM-M1, VM-M2, and VM-K1 are all powered on. VM-K2 is not powered on. The exhibit shows the parent and child resource reservations. If Resource Pool RP-KID is configured with an expandable reservation, which statement is true?___
A. VM-K2 will be unable to power on because there are insufficient resources.
B. VM-K2 will be able to power on since resource pool RP-KID has 2GHz available.
C. VM-K2 will be unable to power on because only 2GHz are reserved for RP-KID.
D. VM-K2 will receive resource priority and will be able to power on this scenario.
【单选题】
Which is the block size on the VMFS6 datastore?___
A. All small and large file blocks are 8MB.
B. All small and large file blocks are 1MB.
C. Small file blocks are 512KB. large file blocks are 64MB.
D. Small file blocks are 1MB, large file blocks are 512MB.
【单选题】
When installing vCenter Converter Standalone, why must an administrator perform a client-server installation instead of a local installation?___
A. to manage conversion tasks remotely
B. to convert virtual machines as well as physical machines
C. to allow installation of the Converter agent on remote source machines
D. to hot clone physical or virtual machines
【单选题】
Which is required by vCenter Converter Standalone to convert a physical Red Hat Enterprise Linux 7 machine to a virtual machine?___
A. The Linux machine must be powered off.
B. The Linux machine must have the SSH daemon started.
C. The Linux machine must use a static IP address.
D. The Linux machine must have a fully-qualified domain name.
【单选题】
An administrator is troubleshooting network communications between a vCenter Server and an ESXi 6.5 host. Which log shows the related events between these components?___
A. /var/log/fdm.log
B. /var/log/vpxa.log
C. /var/log/hostd.log
D. /var/log/auth.log
【单选题】
An administrator has recently upgraded from vSphere 6.0 to 6.5, and can no longer see the software iSCSI named vmhba33. Which could be the reason for this?___
A. The upgrade has changed the vmhba name.
B. vSphere 6.5 automates iSCSI configurations.
C. vSphere 6.5 no longer supports software iSCSI.
D. The upgrade has deleted the vmhba.
【单选题】
An administrator is trying to vMotion a VM from his datacenter to a recovery site. Which is the maximum allowed RTT (Round-Trip Time) latency between source and destination host?___
A. 100 milliseconds
B. 150 milliseconds
C. 15 milliseconds
D. 10 milliseconds
【单选题】
Which is required for configuring iSCSI Software Adapter network port binding?___
A. VMkernel of the iSCSI traffic must be load balanced using Route based on IP Hash algorithm.
B. VMkernel of the iSCSI traffic must be load balanced using Route based on Source Virtual Port ID algorithm.
C. VMkernel of the iSCSI traffic must be load balanced using Route based on Source MAC Hash algorithm.
D. VMkernel of the iSCSI traffic must be bound to only one active network adapter.
【单选题】
In vSphere Data Protection 6.1, which is the function of a Backup Verification job?___
A. None. Backup Verification job is not a feature of vSphere Data Protection
B. It is a manual task -Power it on -Verify the guest OS -Check started applications
C. It is an automatic process -Restore a virtual machine -Power it on -Verify that the guest OS is booted by communicating with the Backup Verification agent
D. It is an automatic process -Restore a virtual machine -Power it on -Verify that the guest OC is booted by detecting the VMware ToolsTM "heartbeats"
【单选题】
An administrator has enabled vSphere Distributed Switch Health Check. The hosts connected to that Distributed Switch all display an alert:< vSphere Distributed Switch MTU supported status > .The administrator has all of the VMkernel ports MTU sizes set to 1600. Which action will remedy this problem?___
A. Configure the Distributed Switch to MTU 9100.
B. Disconnect and reconnect the physical network cable.
C. Configure the physical switch to MTU 1600.
D. Disable the Distributed Switch MTU.
【单选题】
Which Host Profile Subprofile configuration is used to configure firewall settings for ESXi hosts?___
A. Advanced Configuration Settings
B. General System Settings
C. Security
D. Networking
【单选题】
Where would a vSphere administrator find general vCenter Server logs on a vCenter Server Appliance?___
A. /var/log/vmware/vpxd/
B. /var/log/messages
C. /etc/vmware-vpx/
D. /var/log/vmware/vsan-health/
【单选题】
An administrator wishes to enable network port mirroring based on source port. Which feature should be enabled?___
A. vSphere standard switch port
B. ERSPAN
C. NSX Virtual Wire
D. VLAN
【单选题】
Which CLI command shows the physical uplink status for a vmnic?___
A. esxcli network ip connection list
B. esxcli network ip neighbor list
C. esxcli network nic get
D. esxcli network nic list
【单选题】
Which is the maximum number of block devices (LUNs) that are supported by ESXi hosts that are running version 6.5?___
A. 1024
B. 512
C. 2048
D. 256
【单选题】
When performing a vCenter Server 5.5 for Windows with Microsoft SQL Server Express database migration to vCenter Server Appliance 6.5, which will be the target database?___
A. Microsoft SQL Server Express 2012R2
B. Microsoft SQL Server Standard 2012R2
C. PostgreSQL
D. Oracle DB 11g
【单选题】
An administrator has multiple vCenter Server 6.5 systems but cannot enable Storage I/O Control (SIOC) on a datastore shared by ESXi hosts managed by the vCenter Server systems. Which action should the administrator take to resolve the issue?___
A. Unmount the datastore and then enable SIOC on the vCenter Server system.
B. Configure the datastore to be managed by a single vCenter Server system.
C. Configure Storage DRS and then enable SIOC on the vCenter Server system.
D. Enable Raw Device Mapping (RDM) on the
E. SXi hosts.
【单选题】
“OneAppServer” is a VM template stored in a content library named “LibraryOne”, but the vSphere administrator is not able to use this template for deployment. Why is the administrator unable to deploy OneAppServer?___
A. OneAppServer must be updated before it can be deployed.
B. LibraryOne is a subscribed library and OneAppServer is not downloaded yet.
C. LibraryOne is published and optimized for syncing over HTTP.
D. OneAppServer was imported from a local file on the system.
【单选题】
An administrator sets the Failover Capacity for both CPU and Memory at 25%. Based on the Exhibit below, how much of the cluster’s total CPU resources are still available to power on additional virtual machines?___
A. 45%
B. 25%
C. 70%
D. 60%
【单选题】
Which statement applies to the vSphere Replication appliance?___
A. Only one vSphere Replication appliance can be deployed per vCenter Server instance.
B. VMware Tools in the vSphere Replication appliance can be upgraded.
C. A single vSphere Replication appliance can manage a maximum of 4000 replications.
D. vSphere Replication is available only with the vSphere
E. ssentials Plus license.
【单选题】
Which esxcli namespace can a vSphere Administrator use to adjust the queue depth?___
A. esxcli system module parameters
B. esxcli storage core device
C. esxcli system module set
D. esxcli storage core adapter
【单选题】
Which statement regarding datastore clusters meets VMware’s recommended best practices?___
A. Clusters should contain only datastores presented from the same storage array.
B. Clusters should contain only datastores with equal hardware acceleration capability.
C. Clusters should contain only datastores with the same capacity.
D. Clusters should contain only datastores using the same connection method (iSCSI, FC, etc.).
【单选题】
What VM Monitoring setting would ensure that the maximum reset window for a virtual machine is 24 hours?___
A. Medium
B. Low
C. High
D. Normal
【单选题】
What is the default space threshold for vSphere Storage DRS?___
A. 80%
B. 70%
C. 90%
D. 95%
【单选题】
Which is the correct sequence to upgrade a vSphere infrastructure?___
A. vCenter Server>ESXi host> VMware Tools>VM compatibility
B. ESXi host>vCenter Server> VMware Tools>VM compatibility
C. vCenter host> ESXi host> VM compatibility> VMware Tools
D. ESXi host>vCenter Server> VM compatibility>VMware Tools
【单选题】
An administrator has a large boot from SAN cluster and wants to ensure consistent configuration by using host profiles. What special considerations are required for boot from SAN hosts?___
A. Change the “Device is shared clusterwide” setting to “false” in the host profile.
B. Verify that the boot LUN is correctly identified as the boot device in the host profile.
C. The boot from SAN device must report as a local device.
D. Host profiles are incompatible with boot from SAN hosts.
推荐试题
【单选题】
构件抵抗变形的能力称___。
A. 刚度
B. 强度
C. 稳定性
D. 极限强度
【单选题】
构件抵抗破坏的能力___。
A. 刚度
B. 强度
C. 稳定性
D. 极限强度
【单选题】
构件保持原来平衡状态的能力称___。
A. 刚度
B. 强度
C. 稳定性
D. 极限强度
【单选题】
杆件的变形与杆件的___有关。
A. 外力
B. 外力、截面大小
C. 外力、截面大小、材料
D. 外力、截面大小、杆长、材料
【单选题】
下列与弯曲梁截面上正应力大小无关的因素是 ___
A. 截面尺寸
B. 截面形状
C. 荷载
D. 材料强度
【单选题】
合力等于零的力系称为___。
A. 等效力系
B. 平衡力系
C. 一般力系
D. 互等力系
【单选题】
下列说法正确的是___。
A. 力的三要素为大小、方向、矩心
B. 二力平衡公理适用于变形体
C. 力的作用效应为变形效应
D. 合力不一定大于分力
【单选题】
关于力偶说法正确的是___。
A. 力偶无合力
B. 力偶大小与矩心位置有关
C. 力偶在作用平面内不能任意移动
D. 力偶可以和一个力等效
【单选题】
以下作用力属于约束反力的是___。
A. 重力
B. 支持力
C. 水压力
D. 土压力
【单选题】
以下关于梁的剪力和弯矩说法正确的是___
A. 剪力为零的截面，弯矩也必定为零
B. 剪力最大的截面，弯矩也必定最大
C. 剪力为零的截面，弯矩有极值
D. 剪力最大的截面，弯矩为零
【单选题】
以下关于弯曲正应力说法正确的是___。
A. 截面弯矩越大，弯曲正应力越大
B. 点距离中性轴越远，弯曲正应力越小
C. 截面高度越高，弯曲正应力越大
D. 截面宽度越大，弯曲正应力越大
【单选题】
以下关于弯曲切应力说法正确的是___。
A. 截面剪力越大，弯曲切应力越小
B. 点距离中性轴越远，弯曲切应力越小
C. 工字型截面翼缘切应力最大
D. 工字型截面腹板切应力均匀分布
【单选题】
以下关于惯性矩说法正确的是___
A. 惯性矩可能为负值
B. 矩形截面惯性矩与截面宽度无关
C. 空心圆形截面惯性矩比相同面积实心圆形截面小
D. 惯性矩越大，抗弯能力越好
【单选题】
力在坐标轴上的投影是___。
A. 矢量
B. 几何量
C. 代数量
D. 以上都不是
【单选题】
二力杆的受力特征是杆件两端约束反力的方向一定是沿着___方向。
A. 力的作用线
B. 两个作用点的连线
C. 杆件轴线
D. 以上都不是
【单选题】
等截面直杆承受轴向拉力 P 作用，若选用三种不同的截面形状：圆形、正方形、空心圆，试比较材料用量，正确的是___。
A. 正方形截面最费料
B. 圆形截面最省料
C. 空心圆最省料
D. 三者用料相同
【单选题】
某木杆的截面积为 A= 100mm²，在 P＝2KN 的外力作用下，木杆横截面上的正应 力 为 ___。
A. 0.2MPa
B. 2MPa
C. 20MPa
D. 200MPa
【单选题】
某钢杆的截面积为 A=6cm²，在 P=30KN 的外力作用下，钢杆横截面上的正应力为 ___。
A. 0.5MPa
B. 5MPa
C. 50MPa
D. 500MPa
【单选题】
某钢筋混凝土压杆的截面积为 A=400cm²，在 P=600KN 的外力作用下，压杆横截面上的正应力为___。
A. 0.15MPa
B. 1.5MPa
C. 15MPa
D. 150MPa
【单选题】
受压直杆突然发生弯曲而导致折断破坏的现象称为___。
【单选题】
临界力是指压杆在___所受到的最大压力。
A. 稳定状态
B. 临界状态
C. 不稳定状态
D. 破坏状态
【单选题】
下列压杆材料和横截面积均相同，其中临界力最小的是___。
A. 两端铰支
B. 一端固定，一端铰支
C. 两端固定
D. 一端固定，一端自由
【单选题】
下列压杆材料和横截面积均相同，其中临界力最大的是___。
A. 两端铰支
B. 一端固定，一端铰支
C. 两端固定
D. 一端固定，一端自由
【单选题】
临界力越大，压杆的稳定性越___。
A. 差
B. 不变
C. 好
D. 两者没有关系
【单选题】
杆端的约束越强，压杆的临界力就___。
A. 越小
B. 越大
C. 越不易确定
D. 两者没有关系
【单选题】
在两端固定的情况下，压杆的长度系数为___。
A. μ=0.5
B. μ=0.7
C. μ=1
D. μ=2
【单选题】
在两端铰支的情况下，压杆的长度系数为___。
A. μ=0.5
B. μ=0.7
C. μ=1
D. μ=2
【单选题】
在一端固定，一端自由的情况下，压杆的长度系数为___。
A. μ=0.5
B. μ=0.7
C. μ=1
D. μ=2
【单选题】
在下列说法，___是正确的。
A. 内力随外力增大而增大
B. 内力与外力无关
C. 内力随外力的增大而减小
D. 内力沿杆轴是不变的
【单选题】
判断下列结论的正确性___
A. 杆件某截面上的内力是该截面上应力的代数和
B. 杆件某截面上的应力是该截面上内力的平均值
C. 应力是某一点处内力的集度
D. 内力必大于应力
【单选题】
面积不为零的平面图形对于形心轴的___为零。
A. 静矩
B. 惯性矩
C. 惯性半径
D. 惯性积
【单选题】
在下列关于平面图形几何性质的结论中，错误的是___
A. 图形的对称轴必通过形心
B. 图形两个对称轴的交点必为形心
C. 图形对对称轴的静矩为零
D. 使静矩为零的轴一定是对称轴
【单选题】
中性轴是梁的___的交线
A. 纵向对称面与横截面
B. 纵向对称面与中性层
C. 横截面与中性层
D. 横截面与顶面或底面
【单选题】
应用BIM支持和完成装配式工程项目生命周期过程中各种专业任务的专业人员指的是___
A. 装配式BIM标准研究类人员
B. 装配式BIM工具开发类人员
C. 装配式BIM工程应用类人员
D. 装配式BIM教育类人员
【单选题】
下列选项中主要负责组件BIM团队、研究BIM对企业的质量效益和经济效益以及制定BIM实施宏观计划的是___
A. 装配式BIM战略总监
B. 装配式BIM执行经理
C. 装配式BIM技术顾问
D. 装配式BIM操作人员
【单选题】
下列不属于装配式建筑特点的是___。
A. 建设周期短
B. 耐火性好
C. 质量轻、绿色环保
D. 施工精确度不高
【单选题】
新的施工方法可应用于住宅信息传输及接收技术，体现出了装配式的哪一项特点___
【单选题】
下列选项哪一项不属于装配式建筑存在的不足___？
A. 前期一次性成本高
B. 技术水平要求高且高度注重专业协作
C. 需制定相关标准与构造图集
D. 房屋采用新型的供热、制冷技术
【单选题】
为协助管理人员有效决策和精细管理施工现场的进度、成本、质量等信息资料，需要用装配式哪个系列软件___?
A. 装配式BIM机构分析软件
B. 装配式BIM协同平台软件
C. 装配式BIM深化设计软件
D. 装配式BIM建模软件
