【单选题】
Which metric in the Exhibit would identify high latency for a virtual machine operating system?___
A. QAVG/cmd
B. KAVG/cmd
C. DAVG/cmd
D. GAVG/cmd
查看试卷，进入试卷练习
微信扫一扫，开始刷题
相关试题
【单选题】
What VM Monitoring setting would ensure that the failure interval for a virtual machine is defined as 120 seconds?___
A. High
B. Normal
C. Low
D. Medium
【单选题】
The business managers have asked the IT administrator to ensure configuration compliance in the vSphere infrastructure. The IT administrator wants to use Host Profiles to accomplish this, but is unable to do so. Why is the administrator unable to use Host Profiles?___
A. The infrastructure uses a vSphere Standard license.
B. The infrastructure has servers with various CPU families.
C. The user has only the “Administrator” role.
D. Host Profiles apply only to storage settings.
【单选题】
What is the result of a “Consolidate” action on a virtual machine?___
A. All snapshots on the virtual machines will be deleted.
B. The virtual machine will be reverted to its last snapshot.
C. Redundant delta disks will be combined and deleted.
D. A new snapshot with memory state will be created.
【单选题】
A Telco customer is implementing NFV using vSphere as the virtualization platform. Which feature can help achieve a high packet rate with lower CPU consumption?___
A. Network I/O Control
B. SplitRX
C. ERSPAN
D. LACP
【单选题】
What is the VMware-recommended best practice for Fibre Channel zoning?___
A. soft zoning
B. single-initiator-multiple-target zoning
C. single-initiator zoning
D. single-initiator-single-target zoning
【单选题】
How can a vSphere administrator ensure that a set of virtual machines run on different hosts in a DRS cluster?___
A. Use a VM-Host affinity rule.
B. Add the VMs to a vApp.
C. Use a VM-VM affinity rule.
D. Place the VMs in different folders.
【单选题】
vCenter Server Appliance Instance can be backed up using which Client Interface?___
A. vSphere Client Interface
B. vSphere Web Client Interface
C. VMware Host Client Interface
D. Virtual Appliance Management Interface
【单选题】
What tool can capture network traffic at the uplinks, or vSwitch, or virtual port levels?___
A. tcpdump-uw
B. wireshark
C. pktcap-uw
D. pcap
【单选题】
Which storage feature always requires the use of third-party software on ESXi?___
A. Hardware Acceleration for NAS devices
B. VVOL
C. Hardware Acceleration for Block
D. evices
【单选题】
An ESXi host's VMCA-Signed certificate has expired. How can the certificate be renewed?___
A. In the vSphere Web Client, browse to the host in question. Click the Manage tab and select settings. Select System and click Certificate, then click the Renew button.
B. In the vSphere Web Client, browse to the host in question. Click the Manage tab and select settings. Select System and click Certificate, then click the Refresh CA Certificates button.
C. Run the command /sbin/generate-certificates on the affected host.
D. Disconnect the host from vCenter Server and reconnect it.
【单选题】
Which is the correct order for upgrading vSphere components?___
A. vCenter Server, ESXi hosts, VMware Tools, Virtual Machine hardware
B. VMware Tools, Virtual Machine hardware, ESXi hosts, vCenter Server
C. vCenter Server, Virtual Machine hardware, VMware tools, ESXi hosts
D. ESXi hosts, vCenter Server, Virtual Machine hardware, VMware Tools
【单选题】
Which iSCSI initiator type can be used with any network interface card?___
A. Software iSCSI initiator
B. Software FCoE adapter
C. Hardware Independent iSCSI initiator
D. Hardware Dependent iSCSI initiator
【单选题】
An administrator is attempting to power on a virtual machine with 32GB of memory. The operation fails with the following error: <Could not power on VM: No space left on device> <Checking the space on the virtual machine's datastore, there is 30GB free.> Which action would allow the VM to power on?___
A. Set a 2GB memory reservation on the VM.
B. Mount the virtual disk from the affected VM on to another virtual machine and free up space from within the OS.
C. Enable vSphere HD admission control on the cluster in which the VM resides.
D. Set a 2GB memory limit on the VM.
【单选题】
An administrator attempts to manually reclaim space on thin-provisioned VMFS6 volumes but finds that no additional space is being recovered. Which could be causing this?___
A. vSphere 6.5 does not support manual UNMAP.
B. The manual UNMAP operation has been moved to the vSphere web client.
C. The VASA version is use is incompatible.
D. UNMAP is automated for VMFS6.
【单选题】
An administrator has upgraded to vSphere 6.5 and also wants to use Kerberos authentication for NFS. Which can be done to the existing NFSv3 volumes to enable this feature?___
A. Perform a storage rescan on VMFS volumes.
B. Unmount the NFSv3 datastore, and then mount as NFSv4.1 datastore.
C. Nothing. All NFSv3 mounted datastores are upgraded automatically during vSphere upgrades.
D. Perform a scan of new storage devices.
【单选题】
An administrator wants to restore the vCenter Server Appliance 6.5 from backup. Where can this be accomplished?___
A. from the ESXi Host Client
B. from the VMware vSphere Appliance Management Interface
C. from within the VMware vSphere Web Client
D. from the vCenter Server Appliance Installer
【单选题】
The administrator wants to power on VM-K2, which has a 2GHz CPU reservation. VM-M1, VM-M2, and VM-K1 are all powered on. VM-K2 is not powered on. The exhibit shows the parent and child resource reservations. If Resource Pool RP-KID is configured with an expandable reservation, which statement is true?___
A. VM-K2 will be unable to power on because there are insufficient resources.
B. VM-K2 will be able to power on since resource pool RP-KID has 2GHz available.
C. VM-K2 will be unable to power on because only 2GHz are reserved for RP-KID.
D. VM-K2 will receive resource priority and will be able to power on this scenario.
【单选题】
Which is the block size on the VMFS6 datastore?___
A. All small and large file blocks are 8MB.
B. All small and large file blocks are 1MB.
C. Small file blocks are 512KB. large file blocks are 64MB.
D. Small file blocks are 1MB, large file blocks are 512MB.
【单选题】
When installing vCenter Converter Standalone, why must an administrator perform a client-server installation instead of a local installation?___
A. to manage conversion tasks remotely
B. to convert virtual machines as well as physical machines
C. to allow installation of the Converter agent on remote source machines
D. to hot clone physical or virtual machines
【单选题】
Which is required by vCenter Converter Standalone to convert a physical Red Hat Enterprise Linux 7 machine to a virtual machine?___
A. The Linux machine must be powered off.
B. The Linux machine must have the SSH daemon started.
C. The Linux machine must use a static IP address.
D. The Linux machine must have a fully-qualified domain name.
【单选题】
An administrator is troubleshooting network communications between a vCenter Server and an ESXi 6.5 host. Which log shows the related events between these components?___
A. /var/log/fdm.log
B. /var/log/vpxa.log
C. /var/log/hostd.log
D. /var/log/auth.log
【单选题】
An administrator has recently upgraded from vSphere 6.0 to 6.5, and can no longer see the software iSCSI named vmhba33. Which could be the reason for this?___
A. The upgrade has changed the vmhba name.
B. vSphere 6.5 automates iSCSI configurations.
C. vSphere 6.5 no longer supports software iSCSI.
D. The upgrade has deleted the vmhba.
【单选题】
An administrator is trying to vMotion a VM from his datacenter to a recovery site. Which is the maximum allowed RTT (Round-Trip Time) latency between source and destination host?___
A. 100 milliseconds
B. 150 milliseconds
C. 15 milliseconds
D. 10 milliseconds
【单选题】
Which is required for configuring iSCSI Software Adapter network port binding?___
A. VMkernel of the iSCSI traffic must be load balanced using Route based on IP Hash algorithm.
B. VMkernel of the iSCSI traffic must be load balanced using Route based on Source Virtual Port ID algorithm.
C. VMkernel of the iSCSI traffic must be load balanced using Route based on Source MAC Hash algorithm.
D. VMkernel of the iSCSI traffic must be bound to only one active network adapter.
【单选题】
In vSphere Data Protection 6.1, which is the function of a Backup Verification job?___
A. None. Backup Verification job is not a feature of vSphere Data Protection
B. It is a manual task -Power it on -Verify the guest OS -Check started applications
C. It is an automatic process -Restore a virtual machine -Power it on -Verify that the guest OS is booted by communicating with the Backup Verification agent
D. It is an automatic process -Restore a virtual machine -Power it on -Verify that the guest OC is booted by detecting the VMware ToolsTM "heartbeats"
【单选题】
An administrator has enabled vSphere Distributed Switch Health Check. The hosts connected to that Distributed Switch all display an alert:< vSphere Distributed Switch MTU supported status > .The administrator has all of the VMkernel ports MTU sizes set to 1600. Which action will remedy this problem?___
A. Configure the Distributed Switch to MTU 9100.
B. Disconnect and reconnect the physical network cable.
C. Configure the physical switch to MTU 1600.
D. Disable the Distributed Switch MTU.
【单选题】
Which Host Profile Subprofile configuration is used to configure firewall settings for ESXi hosts?___
A. Advanced Configuration Settings
B. General System Settings
C. Security
D. Networking
【单选题】
Where would a vSphere administrator find general vCenter Server logs on a vCenter Server Appliance?___
A. /var/log/vmware/vpxd/
B. /var/log/messages
C. /etc/vmware-vpx/
D. /var/log/vmware/vsan-health/
【单选题】
An administrator wishes to enable network port mirroring based on source port. Which feature should be enabled?___
A. vSphere standard switch port
B. ERSPAN
C. NSX Virtual Wire
D. VLAN
【单选题】
Which CLI command shows the physical uplink status for a vmnic?___
A. esxcli network ip connection list
B. esxcli network ip neighbor list
C. esxcli network nic get
D. esxcli network nic list
【单选题】
Which is the maximum number of block devices (LUNs) that are supported by ESXi hosts that are running version 6.5?___
A. 1024
B. 512
C. 2048
D. 256
【单选题】
When performing a vCenter Server 5.5 for Windows with Microsoft SQL Server Express database migration to vCenter Server Appliance 6.5, which will be the target database?___
A. Microsoft SQL Server Express 2012R2
B. Microsoft SQL Server Standard 2012R2
C. PostgreSQL
D. Oracle DB 11g
【单选题】
An administrator has multiple vCenter Server 6.5 systems but cannot enable Storage I/O Control (SIOC) on a datastore shared by ESXi hosts managed by the vCenter Server systems. Which action should the administrator take to resolve the issue?___
A. Unmount the datastore and then enable SIOC on the vCenter Server system.
B. Configure the datastore to be managed by a single vCenter Server system.
C. Configure Storage DRS and then enable SIOC on the vCenter Server system.
D. Enable Raw Device Mapping (RDM) on the
E. SXi hosts.
【单选题】
“OneAppServer” is a VM template stored in a content library named “LibraryOne”, but the vSphere administrator is not able to use this template for deployment. Why is the administrator unable to deploy OneAppServer?___
A. OneAppServer must be updated before it can be deployed.
B. LibraryOne is a subscribed library and OneAppServer is not downloaded yet.
C. LibraryOne is published and optimized for syncing over HTTP.
D. OneAppServer was imported from a local file on the system.
【单选题】
An administrator sets the Failover Capacity for both CPU and Memory at 25%. Based on the Exhibit below, how much of the cluster’s total CPU resources are still available to power on additional virtual machines?___
A. 45%
B. 25%
C. 70%
D. 60%
【单选题】
Which statement applies to the vSphere Replication appliance?___
A. Only one vSphere Replication appliance can be deployed per vCenter Server instance.
B. VMware Tools in the vSphere Replication appliance can be upgraded.
C. A single vSphere Replication appliance can manage a maximum of 4000 replications.
D. vSphere Replication is available only with the vSphere
E. ssentials Plus license.
【单选题】
Which esxcli namespace can a vSphere Administrator use to adjust the queue depth?___
A. esxcli system module parameters
B. esxcli storage core device
C. esxcli system module set
D. esxcli storage core adapter
【单选题】
Which statement regarding datastore clusters meets VMware’s recommended best practices?___
A. Clusters should contain only datastores presented from the same storage array.
B. Clusters should contain only datastores with equal hardware acceleration capability.
C. Clusters should contain only datastores with the same capacity.
D. Clusters should contain only datastores using the same connection method (iSCSI, FC, etc.).
【单选题】
What VM Monitoring setting would ensure that the maximum reset window for a virtual machine is 24 hours?___
A. Medium
B. Low
C. High
D. Normal
【单选题】
What is the default space threshold for vSphere Storage DRS?___
A. 80%
B. 70%
C. 90%
D. 95%
推荐试题
【多选题】
试分析列车高压故障时，空调紧急通风的响应过程。___
A. 当功能选择开关处于“测试1、测试2、自动、22℃、24℃、26℃、28℃”档位时，若控制盘检测到主回路电源故障，控制器断开所有吸合的接触器，机组停止运行；
B. 延时10S，控制盘向紧急通风逆变器发送紧急通风信号，接触器EMFK吸合，送风机由紧急通风逆变器供电工作；
C. 当主回路电源恢复，控制盘取消紧急通风信号，接触器EMFK断开；主电路电源恢复后--延时5s，机组进入正常运行状态；
D. 若主回路电源一直未恢复，则紧急通风逆变器工作90min后，控制盘取消紧急通风信号，接触器EMFK断开，机组处于待机状态，直到电源恢复正常后机组重新运行。
【多选题】
有电无气如何升弓？___
A. 当蓄电池电压104v，主风缸风压<4.5bar时
B. 合=72-S101，激活列车
C. 合主控钥匙，司机台激活；
D. 按压受电弓升弓按钮；
E. 到B车升弓柜，用方孔钥匙打开柜门，取出脚踏泵，将两位三通阀旋钮打至垂直位置；
F. 踩压脚踏泵至气压5.5bar受电弓应升起，电客车所有照明（受电弓未升起时只有紧急照明）为正常照明，高压设备工作，压缩机打风，另一端的受电弓自动升起；
G. 将两位三通阀旋钮打至横向位，锁闭好柜门。
【多选题】
无电有气如何升弓？___
A. 当蓄电池电压<104v, 主风缸风压4.5bar
B. 到B车升弓柜，用方孔钥匙打开柜门
C. 将两位三通阀旋钮打至垂直位置，该端受电弓升起；
D. 司机按压司机室继电器柜中的=31-S104（充电机应急启动）至蓄电池电压104V后，(期间可尝试激活蓄电池)合=72-S101，激活列车；
E. 司机按压受电弓“升弓”按钮，受电弓保持升起；
F. 将两位三通阀旋钮打至横向位，锁闭好柜门。
【多选题】
无电无气如何升弓？___
A. 当控制电压<104v,主风缸风压<4.5bar
B. 到B车升弓柜，用方孔钥匙打开柜门，取出脚踏泵；
C. 将两位三通阀旋钮打至垂直位置
D. 司机操作脚踏泵至气压5.5bar，受电弓应升起；
E. 司机按压A车继电器柜面板上充电机应急启动按钮=31-S104 ，A车辅助逆变器风机启动；
F. 辅助逆变器开始工作并对蓄电池进行快速充电，此时合=72-S101，观察司机室蓄电池电压上升超过104V 且电压稳定；
G. 激活列车及司机室，按升弓按钮=21-S102 ，确认升弓显示灯按钮和HMI 显示屏上受电弓状态正确、网压显示正常，等待空压机打气完毕（主风缸气压升至9bar）；
H. 将两位三通阀旋钮打至横向位，锁闭好柜门。
【多选题】
静调电源柜送电操作顺序。___
A. 静调电源柜电缆接头接到车间电源插座。
B. 合上车辆的列车激活开关。
C. 合上静调电源柜总控电源开关。
D. 打开电子锁使静调电源柜控制回路得电。
E. 按下合闸按钮，送电。
【多选题】
描述静调电源柜断电操作顺序。___
A. 按下静调电源柜分闸按钮。
B. 分断列车激活开关。
C. 断开电子锁使静调电源柜控制回路断电。
D. 断开静调电源柜总控电源开关。
E. 断开静调电源柜电缆接头与车间电源插座连接。
【多选题】
在年检作业中，如何检查高速断路器？___
A. 检查高速断路器无损坏、无污垢；
B. 底座螺栓防松线清晰无错位；
C. 高速断路器灭弧罩安装紧固螺栓防松线清晰无错位；
D. 辅助触点端盖内六角紧固螺栓防松线清晰无错位
E. 高速断路器进、出线排紧固螺栓齐全，防松线清晰无错位。
【多选题】
在年检作业中，如何检查接触器(KM1、KM2)状态？___
A. 拆下灭弧罩，灭弧罩应无机械损坏或金属粉尘，否则更换或清除；
B. 接触器主触头外观良好、动作灵活、安装紧固。
【多选题】
在年检作业中，如何检查牵引电机？___
A. 检查进气口和排气口，进、出风滤网紧固螺栓防松线清晰无错位；滤网无堵塞。
B. 检查牵引电机悬挂及电缆、电源盒状态，电机悬挂件防松线清晰无错位；电机机座无裂纹；电缆、电源盒外观无破损、放电烧痕，三相电缆固定螺栓无松动。
C. 检查温度传感器和速度传感器，速度传感器和温度传感器安装稳固，传感器线缆外观无破损、断裂现象。
D. 吹扫进气滤网和出气滤网，用压缩空气清洁进、出气滤网和联轴节。
E. 重新润滑轴承，用壳牌能得力（Shell RETINAX）LX2抗摩擦轴承润滑脂重新润滑深沟球轴承（约 19 g）、圆柱滚子轴承（约 16 g）。
【多选题】
试分析跳主断的原因？ ___
A. 差分电流大于50A、充电超时、充电接触器（KM2）卡合、短接接触器（KM1）卡合；
B. 元件故障、硬件判断网压过压、硬件判断直流过压、硬件判断直流过流、斩波1过流、斩波2过流、电源故障、板不在位；
C. 软件判断网压过压、软件判断中间电压过压、MCU生命信号中断、主断线圈减载故障。
【多选题】
DCU软件主要由哪些控制功能软件组成？___
A. 变流器逻辑保护及特性控制
B. 速度处理及斩波控制
C. 粘着利用控制
D. 牵引电机控制
【多选题】
哪些条件均满足时 ，闭合充电接触器。___
A. 主断反馈状态为闭合
B. 方向手柄非零位
C. 网压大于1300V
D. 无斩波开通标志
【多选题】
哪些条件均满足时 ，闭合短接接触器。___
A. 充电接触器反馈状态为闭合已达3s
B. 中间电压不低于1300V且大于网压的85%
C. 方向手柄非零位
【多选题】
简述牵引系统技术术语和中文名称 ___
A. VVVF（牵引逆变器）、
B. SIV（辅助电源箱）、
C. TCMS（列车控制与监控系统）、
D. DCU（传动控制单元）、
E. HV（高压电器箱）、
F. L（滤波电抗器）、
G. BR（制动电阻）
【多选题】
电气牵引设备主要包括哪些，数量各是多少？___
A. 能耗记录仪箱（B车，共2个）、
B. 高压电器箱（B、C车，共4个）、
C. 滤波电抗器箱（B、C车，共4个）、
D. 牵引逆变器箱（B、C车，共4个）、
E. 制动电阻（B、C车，共4个）、
F. 牵引电机（B、C车，共16个）、
G. 接地装置（A、B、C车，共20个）、
H. 齿轮传动装置（B、C车，共4个）、司机控制器（A车，共2个）。
【多选题】
简述辅助系统组成及相应功能___
A. 逆变部分：辅助用电设备大都需要三相50 Hz，380 V/220 V交流电源，因而首先要将波动的直流网压逆变为恒压恒频的三相交流电。
B. 变压器隔离部分：为了安全必须将电网上的高压与低压用电设备，尤其是常需人工操作的控制电源的设备，在电气电位上实现隔离。通常采用变压器进行电气隔离，同时也可通过设计不同的匝比以满足电压值的需要。
C. 直流电源（兼作蓄电池充电器）：车辆上各控制电器都由直流电源DC/DC供电。车辆上蓄电池为紧急用电所需，所以DC110 V控制电源同时也是蓄电池的充电器。
【多选题】
简述列车双弓都无法升弓电气方面可能原因。___
A. 受电弓控制空开跳闸；
B. 司机室未占有；
C. 紧制停车按钮拍下未恢复；
D. 升弓按钮故障；
【多选题】
电客车单节车单侧照明不亮的原因？___
A. 单节车单边两个供电电源模块同时损坏
B. 单节车单侧继电器损坏（如MP车左侧照明为52-K201损坏）
【多选题】
电客车TC1车远光灯不亮的原因？ ___
A. 24V电源模块损坏
B. 远光灯继电器51-K101触点不动作
C. 头灯损坏
【多选题】
辅助系统的交流负载有哪些？___
A. 外接AC220V负载插座；
B. 空调压缩机；
C. 冷凝器风机（冷凝器风扇）；
D. 送风机（含空调通风机，蒸发器风扇）；
E. 电加热器；
F. 设备通风机（制动电阻通风）；
G. 空气压缩机
【单选题】
列车激活后，当方向手柄、牵引手柄都位于“0”位时，列车施加___制动 。
A. 停放制动
B. 常用制动
C. 保持制动
D. 紧急制动
【单选题】
列车激活后，当方向手柄向前、牵引手柄向后时，列车施加___制动。
A. 停放制动
B. 常用制动
C. 保持制动
D. 紧急制动
【单选题】
1-2个转向架气制动切除限速___。
A. 75km/h
B. 60km/h
C. 50km/h
D. 35km/h
【单选题】
3-4个转向架气制动切除限速 ___。
A. 75km/h
B. 60km/h
C. 50km/h
D. 35km/h
【单选题】
5-6个转向架气制动切除限速___。
A. 75km/h
B. 60km/h
C. 50km/h
D. 35km/h
【单选题】
7个及以上转向架气制动切除限速牵引。___。
A. 75km/h
B. 60km/h
C. 50km/h
D. 限制牵引
【单选题】
正线实际运营切除远端B05时间为___。
A. 180秒
B. 210秒
C. 240秒
D. 270秒
【单选题】
故障车门不能切除，列车区间限速（ ）,站台限速___。
A. 40km/h、5km/h
B. 40km/h、10km/h
C. 35km/h、10km/h
D. 35km/h、5km/h
【单选题】
司机室侧门无法关闭，报告OCC请求增派保安或副司机协助扶住故障门，限速___维持运行到终点站退出服务。
A. 50km/h
B. 45km/h
C. 55km/h
D. 60km/h
【单选题】
列车激活后，当方向手柄向后时，非激活端标志灯为___。
【单选题】
一节车___动态地图无显示或混乱可未经修复上线运营。
【单选题】
同一节车___个空调机组通风功能故障，严重故障禁止上线运营。
【单选题】
___及以上BCU中级故障、严重故障禁止上线运营。
【单选题】
___及以上空压机中级故障、严重故障禁止上线运营。
【单选题】
运营中出现单个受电弓降下，重新升弓后故障消除，正确的应对方案___。
A. 当前站退出服务
B. 前方站退出服务
C. 终点站退出服务
D. 继续运营
【单选题】
一个牵引1个动车牵引切除限速___。
A. 75km/h
B. 60km/h
C. 45km/h
D. 30km/h
【单选题】
2个动车牵引切除限速___。
A. 75km/h
B. 60km/h
C. 45km/h
D. 30km/h
【单选题】
3个动车牵引切除限速___。
A. 75km/h
B. 60km/h
C. 45km/h
D. 30km/h
【单选题】
列车断电后重新激活间隔时间为___。
A. 10s
B. 12s
C. 15s
D. 30s
