【单选题】
vCenter Server Appliance Instance can be backed up using which Client Interface?___
A. vSphere Client Interface
B. vSphere Web Client Interface
C. VMware Host Client Interface
D. Virtual Appliance Management Interface
查看试卷,进入试卷练习
微信扫一扫,开始刷题
相关试题
【单选题】
What tool can capture network traffic at the uplinks, or vSwitch, or virtual port levels?___
A. tcpdump-uw
B. wireshark
C. pktcap-uw
D. pcap
【单选题】
Which storage feature always requires the use of third-party software on ESXi?___
A. Hardware Acceleration for NAS devices
B. VVOL
C. Hardware Acceleration for Block
D. evices
【单选题】
An ESXi host's VMCA-Signed certificate has expired. How can the certificate be renewed?___
A. In the vSphere Web Client, browse to the host in question. Click the Manage tab and select settings. Select System and click Certificate, then click the Renew button.
B. In the vSphere Web Client, browse to the host in question. Click the Manage tab and select settings. Select System and click Certificate, then click the Refresh CA Certificates button.
C. Run the command /sbin/generate-certificates on the affected host.
D. Disconnect the host from vCenter Server and reconnect it.
【单选题】
Which is the correct order for upgrading vSphere components?___
A. vCenter Server, ESXi hosts, VMware Tools, Virtual Machine hardware
B. VMware Tools, Virtual Machine hardware, ESXi hosts, vCenter Server
C. vCenter Server, Virtual Machine hardware, VMware tools, ESXi hosts
D. ESXi hosts, vCenter Server, Virtual Machine hardware, VMware Tools
【单选题】
Which iSCSI initiator type can be used with any network interface card?___
A. Software iSCSI initiator
B. Software FCoE adapter
C. Hardware Independent iSCSI initiator
D. Hardware Dependent iSCSI initiator
【单选题】
An administrator is attempting to power on a virtual machine with 32GB of memory. The operation fails with the following error: <Could not power on VM: No space left on device> <Checking the space on the virtual machine's datastore, there is 30GB free.> Which action would allow the VM to power on?___
A. Set a 2GB memory reservation on the VM.
B. Mount the virtual disk from the affected VM on to another virtual machine and free up space from within the OS.
C. Enable vSphere HD admission control on the cluster in which the VM resides.
D. Set a 2GB memory limit on the VM.
【单选题】
An administrator attempts to manually reclaim space on thin-provisioned VMFS6 volumes but finds that no additional space is being recovered. Which could be causing this?___
A. vSphere 6.5 does not support manual UNMAP.
B. The manual UNMAP operation has been moved to the vSphere web client.
C. The VASA version is use is incompatible.
D. UNMAP is automated for VMFS6.
【单选题】
An administrator has upgraded to vSphere 6.5 and also wants to use Kerberos authentication for NFS. Which can be done to the existing NFSv3 volumes to enable this feature?___
A. Perform a storage rescan on VMFS volumes.
B. Unmount the NFSv3 datastore, and then mount as NFSv4.1 datastore.
C. Nothing. All NFSv3 mounted datastores are upgraded automatically during vSphere upgrades.
D. Perform a scan of new storage devices.
【单选题】
An administrator wants to restore the vCenter Server Appliance 6.5 from backup. Where can this be accomplished?___
A. from the ESXi Host Client
B. from the VMware vSphere Appliance Management Interface
C. from within the VMware vSphere Web Client
D. from the vCenter Server Appliance Installer
【单选题】
The administrator wants to power on VM-K2, which has a 2GHz CPU reservation. VM-M1, VM-M2, and VM-K1 are all powered on. VM-K2 is not powered on. The exhibit shows the parent and child resource reservations. If Resource Pool RP-KID is configured with an expandable reservation, which statement is true?___
A. VM-K2 will be unable to power on because there are insufficient resources.
B. VM-K2 will be able to power on since resource pool RP-KID has 2GHz available.
C. VM-K2 will be unable to power on because only 2GHz are reserved for RP-KID.
D. VM-K2 will receive resource priority and will be able to power on this scenario.
【单选题】
Which is the block size on the VMFS6 datastore?___
A. All small and large file blocks are 8MB.
B. All small and large file blocks are 1MB.
C. Small file blocks are 512KB. large file blocks are 64MB.
D. Small file blocks are 1MB, large file blocks are 512MB.
【单选题】
When installing vCenter Converter Standalone, why must an administrator perform a client-server installation instead of a local installation?___
A. to manage conversion tasks remotely
B. to convert virtual machines as well as physical machines
C. to allow installation of the Converter agent on remote source machines
D. to hot clone physical or virtual machines
【单选题】
Which is required by vCenter Converter Standalone to convert a physical Red Hat Enterprise Linux 7 machine to a virtual machine?___
A. The Linux machine must be powered off.
B. The Linux machine must have the SSH daemon started.
C. The Linux machine must use a static IP address.
D. The Linux machine must have a fully-qualified domain name.
【单选题】
An administrator is troubleshooting network communications between a vCenter Server and an ESXi 6.5 host. Which log shows the related events between these components?___
A. /var/log/fdm.log
B. /var/log/vpxa.log
C. /var/log/hostd.log
D. /var/log/auth.log
【单选题】
An administrator has recently upgraded from vSphere 6.0 to 6.5, and can no longer see the software iSCSI named vmhba33. Which could be the reason for this?___
A. The upgrade has changed the vmhba name.
B. vSphere 6.5 automates iSCSI configurations.
C. vSphere 6.5 no longer supports software iSCSI.
D. The upgrade has deleted the vmhba.
【单选题】
An administrator is trying to vMotion a VM from his datacenter to a recovery site. Which is the maximum allowed RTT (Round-Trip Time) latency between source and destination host?___
A. 100 milliseconds
B. 150 milliseconds
C. 15 milliseconds
D. 10 milliseconds
【单选题】
Which is required for configuring iSCSI Software Adapter network port binding?___
A. VMkernel of the iSCSI traffic must be load balanced using Route based on IP Hash algorithm.
B. VMkernel of the iSCSI traffic must be load balanced using Route based on Source Virtual Port ID algorithm.
C. VMkernel of the iSCSI traffic must be load balanced using Route based on Source MAC Hash algorithm.
D. VMkernel of the iSCSI traffic must be bound to only one active network adapter.
【单选题】
In vSphere Data Protection 6.1, which is the function of a Backup Verification job?___
A. None. Backup Verification job is not a feature of vSphere Data Protection
B. It is a manual task -Power it on -Verify the guest OS -Check started applications
C. It is an automatic process -Restore a virtual machine -Power it on -Verify that the guest OS is booted by communicating with the Backup Verification agent
D. It is an automatic process -Restore a virtual machine -Power it on -Verify that the guest OC is booted by detecting the VMware ToolsTM "heartbeats"
【单选题】
An administrator has enabled vSphere Distributed Switch Health Check. The hosts connected to that Distributed Switch all display an alert:< vSphere Distributed Switch MTU supported status > .The administrator has all of the VMkernel ports MTU sizes set to 1600. Which action will remedy this problem?___
A. Configure the Distributed Switch to MTU 9100.
B. Disconnect and reconnect the physical network cable.
C. Configure the physical switch to MTU 1600.
D. Disable the Distributed Switch MTU.
【单选题】
Which Host Profile Subprofile configuration is used to configure firewall settings for ESXi hosts?___
A. Advanced Configuration Settings
B. General System Settings
C. Security
D. Networking
【单选题】
Where would a vSphere administrator find general vCenter Server logs on a vCenter Server Appliance?___
A. /var/log/vmware/vpxd/
B. /var/log/messages
C. /etc/vmware-vpx/
D. /var/log/vmware/vsan-health/
【单选题】
An administrator wishes to enable network port mirroring based on source port. Which feature should be enabled?___
A. vSphere standard switch port
B. ERSPAN
C. NSX Virtual Wire
D. VLAN
【单选题】
Which CLI command shows the physical uplink status for a vmnic?___
A. esxcli network ip connection list
B. esxcli network ip neighbor list
C. esxcli network nic get
D. esxcli network nic list
【单选题】
Which is the maximum number of block devices (LUNs) that are supported by ESXi hosts that are running version 6.5?___
A. 1024
B. 512
C. 2048
D. 256
【单选题】
When performing a vCenter Server 5.5 for Windows with Microsoft SQL Server Express database migration to vCenter Server Appliance 6.5, which will be the target database?___
A. Microsoft SQL Server Express 2012R2
B. Microsoft SQL Server Standard 2012R2
C. PostgreSQL
D. Oracle DB 11g
【单选题】
An administrator has multiple vCenter Server 6.5 systems but cannot enable Storage I/O Control (SIOC) on a datastore shared by ESXi hosts managed by the vCenter Server systems. Which action should the administrator take to resolve the issue?___
A. Unmount the datastore and then enable SIOC on the vCenter Server system.
B. Configure the datastore to be managed by a single vCenter Server system.
C. Configure Storage DRS and then enable SIOC on the vCenter Server system.
D. Enable Raw Device Mapping (RDM) on the
E. SXi hosts.
【单选题】
“OneAppServer” is a VM template stored in a content library named “LibraryOne”, but the vSphere administrator is not able to use this template for deployment. Why is the administrator unable to deploy OneAppServer?___
A. OneAppServer must be updated before it can be deployed.
B. LibraryOne is a subscribed library and OneAppServer is not downloaded yet.
C. LibraryOne is published and optimized for syncing over HTTP.
D. OneAppServer was imported from a local file on the system.
【单选题】
An administrator sets the Failover Capacity for both CPU and Memory at 25%. Based on the Exhibit below, how much of the cluster’s total CPU resources are still available to power on additional virtual machines?___
A. 45%
B. 25%
C. 70%
D. 60%
【单选题】
Which statement applies to the vSphere Replication appliance?___
A. Only one vSphere Replication appliance can be deployed per vCenter Server instance.
B. VMware Tools in the vSphere Replication appliance can be upgraded.
C. A single vSphere Replication appliance can manage a maximum of 4000 replications.
D. vSphere Replication is available only with the vSphere
E. ssentials Plus license.
【单选题】
Which esxcli namespace can a vSphere Administrator use to adjust the queue depth?___
A. esxcli system module parameters
B. esxcli storage core device
C. esxcli system module set
D. esxcli storage core adapter
【单选题】
Which statement regarding datastore clusters meets VMware’s recommended best practices?___
A. Clusters should contain only datastores presented from the same storage array.
B. Clusters should contain only datastores with equal hardware acceleration capability.
C. Clusters should contain only datastores with the same capacity.
D. Clusters should contain only datastores using the same connection method (iSCSI, FC, etc.).
【单选题】
What VM Monitoring setting would ensure that the maximum reset window for a virtual machine is 24 hours?___
A. Medium
B. Low
C. High
D. Normal
【单选题】
What is the default space threshold for vSphere Storage DRS?___
A. 80%
B. 70%
C. 90%
D. 95%
【单选题】
Which is the correct sequence to upgrade a vSphere infrastructure?___
A. vCenter Server>ESXi host> VMware Tools>VM compatibility
B. ESXi host>vCenter Server> VMware Tools>VM compatibility
C. vCenter host> ESXi host> VM compatibility> VMware Tools
D. ESXi host>vCenter Server> VM compatibility>VMware Tools
【单选题】
An administrator has a large boot from SAN cluster and wants to ensure consistent configuration by using host profiles. What special considerations are required for boot from SAN hosts?___
A. Change the “Device is shared clusterwide” setting to “false” in the host profile.
B. Verify that the boot LUN is correctly identified as the boot device in the host profile.
C. The boot from SAN device must report as a local device.
D. Host profiles are incompatible with boot from SAN hosts.
【单选题】
When using VMware Converter to import a Windows server and improve the consistency of the destination virtual machine, which optional step can be performed immediately prior to powering down the source server?___
A. Perform a final synchronization task.
B. Remove the server from the network.
C. Uninstall production applications.
D. Remove the server from the Active Directory domain.
【单选题】
Restoration of the vCenter Server Appliance is accomplished using which interface?___
A. vSphere Web Client
B. vSphere Client
C. vCenter Server Appliance Management Interface
D. vCenter Server Appliance GUI Installer
【单选题】
When attempting to migrate a virtual machine to another host in the same cluster, the error message, “Select a valid compute resource” returns. What could cause this error?___
A. Both hosts run different versions of ESXi.
B. Both hosts are not sharing the same datastore.
C. VMware Tools is not installed.
D. Virtual machine has an ISO attached.
【单选题】
When will vSphere Data Protection delete the expired backup image of a Platform Service Controller?___
A. Immediately after the retention period has expired.
B. After the expired backup image is restored.
C. During the next backup window following expiry.
D. During the next maintenance window following expiry.
【单选题】
Group A has permission to download files in Content Library. Group B does not have permission to download files in Content Library. If a user is a member of both groups, what will be the result?___
A. The user cannot download file from Content Library.
B. The user can download file from Content Library.
C. The user cannot access Content Library.
D. The user can access Content Library.
推荐试题
【单选题】
FMGS的组件包括:___
A. 两个FMGC-两个MCDU-两个FAC-两个FCU
B. 两个FMGC-两个MCDU-两个FAC-一个FCU
C. 两个FMGC-两个MCDU-两个FAC-两个ECAM
D. 两个FMGC-两个MCDU-两个ECAM-一个FCU
【单选题】
飞机正常供电,MCDU的阴极射线管是暗的而无任何其他警告,这意味着:___
A. FMGC关闭
B. FMGC失效
C. MCDU跳开关拔出
D. MCDU亮度旋钮在暗位
【单选题】
这些信息出现在副驾驶的ND上:“SELECTOFFSIDERANGE/MODE”&“MAPNOTAVAILABLE”___
A. IRS未完全校准
B. 在机长FMGC上输入的飞行计划未传到副驾驶的FMGC
C. 当两个EFIS控制面板未设在同一距离和方式时,只有一个FMGC工作
D. 不确定
【单选题】
如FMGC1和2故障,在两个无线电管理面板上进行导航选择后:___
A. VOR,ILS和ADF接收机1和2可通过无线电管理面板1(RMP1)调谐
B. VOR,ILS和ADF接收机1可通过无线电管理面板1(RMP1)调谐
C. RMP1控制VOR/DME1,ILS和ADF1,RMP2控制VOR/DME2,ILS
D. 不确定
【单选题】
下列哪一个速度方式断开的条件是不对的:___
A. 在FCU高度自动断开
B. 在FCU上拔出速度旋钮人工断开
C. 由设置新的FCU高度断开
D. 不确定
【单选题】
飞机操纵可以是人工或自动,飞机的引导可以是管理或选择。你如何理解这种情况:管理引导-人工操纵-选择速度___
A. FMGC控制F/D,飞行员用侧杆飞行,在速度窗调节速度(旋钮已拔出)
B. 自动驾驶控制飞行,飞行员设置目标参数,FMGC计算并显示目标速度
C. FMGC控制F/D,飞行员设置目标参数,EFCS控制飞行,FMGC计算并显示目标速度
D. 不确定
【单选题】
飞行中,人工更新FMGC中的位置后:___
A. 还需更新IRS位置
B. 飞机运动时不能更新IRS
C.
D.
【单选题】
AP/FD的基本工作方式为:___
A. 俯仰和横滚
B. 垂直速度和航向
C. 高度和导航
D. 速度和航向
【单选题】
在ILS进近时,何时将两部自动驾驶接通:___
A. 当“LAND”在FMA上呈绿色时
B. 当飞机稳定在下滑道截获高度时
C. 只要航道截获
D. 进近按钮按亮
【单选题】
在ILS进近时,导航方式将在何时断开:___
A. 下滑道截获
B. 航向道截获
C. 以上A和B
D. 不确定
【单选题】
将推力杆设在慢车将断开自动推力方式,何时可再次衔接自动推力?___
A. 当推力杆位置改变
B. 当自动推力按钮按下
C. 如果推力杆设在爬升位
D. 如果推力杆从慢车位移开且按下自动推力按钮
【单选题】
在下面哪一种情况下,自动推力不会断开:___
A. 两个推力杆设在慢车位时
B. 在FCU上按下自动推力按钮
C. 当音响警告宣布“RETARD!”(收油门)
D. 按下自动油门解除按钮
【单选题】
FCU上的LOC按钮按下,使航道方式预位。此方式用于:___
A. 建立公布的航道进近
B. 进近时跟踪VOR信标
C. 无下滑道的ILS进近
D. 以上A和C
【单选题】
FMGC的功能是:___
A. 飞行制导和飞行包线保护
B. 飞行管理和飞行包线保护
C. 飞行管理和飞行制导
D. 飞行包线保护和偏航坐标轴控制
【单选题】
自动飞行系统计算机是:___
A. FMGC和升降舵副翼计算机(ELAC)
B. FMGC和扰流板升降舵计算机(SEC)
C. FMGC和飞行增稳计算机(FAC)
D. 升降舵副翼计算机(ELAC)和扰流板升降舵计算机(SEC)
【单选题】
当AP1和AP2未接通,FD1和FD2接通,自动油门工作时:___
A. FMGC1控制1号发动机,FMGC2控制2号发动机
B. FMGC1控制两台发动机
C. FMGC2控制两台发动机
D. 飞行操纵和发动机仅由一台FMGC控制
【单选题】
如何接通飞行指引?___
A. 按下FCU上的FD按钮
B. 系统通电时自动接通
C. 在FCU上选择一个方式
D. 在MCDU上选择起始页面
【单选题】
推力杆处于爬升位,自动推力断开,发动机推力:___
A. 等于爬升推力限制
B. 冻结在现有推力
C. 对应于推力杆位置
D. 逐渐等于推力杆位置
【单选题】
起飞方式接通时:___
A. 自动推力自动接通并激活
B. 自动推力自动接通但不激活
C. 自动推力不自动接通,发动机由推力杆控制
D. 自动推力不自动接通,发动机由最后的推力目标控制
【单选题】
飞行中,AP接通且自动推力工作,自动推力方式:___
A. 可由飞行员在FCU上选择
B. 可由飞行员在MCDU上选择
C. 取决于AP横向方式
D. 取决于AP纵向方式
【单选题】
飞行中,自动推力未接通,推力杆在爬升位,α平台被探测到___
A. 自动推力不接通,因为发动机已处于爬升推力
B. 自动推力自动接通,但不工作
C. 自动推力自动接通并用爬升推力控制发动机
D. 自动推力自动接通并用起飞/复飞推力控制发动机
【单选题】
当AP未衔接时,哪一个组件进行偏航指令的计算?___
A. FMGC或ELAC
B. ELAC或FAC
C. FMGC和FAC
D. 不确定
【单选题】
当AP衔接时,在哪种方式下发动机失效补偿通过偏航阻尼作动筒可得到?___
A. 在巡航阶段
B. 在LAND方式
C. 在TO,GA或RWY方式
D. 不确定
【单选题】
当AP衔接时,协调转弯功能由哪一个作动筒提供?___
A. 方向舵配平作动筒
B. 方向舵配平作动筒和偏航阻尼作动筒
C. 偏航阻尼作动筒
D. 不确定
【单选题】
FAC如何衔接?___
A. 通过按压驾驶舱顶板上的FAC按钮开关
B. FAC内部监控(包括上电测试)正常且衔接条件符合要求
C. 上述两项都对
D. 不确定
【单选题】
何时FAC按钮上OFF灯亮?___
A. 当相关的FAC失效时
B. 当FAC按钮按下,相关的FAC无电时
C. 当FAC按钮弹出时
D. 不确定
【单选题】
当AP没有衔接时,哪个计算机发出Y/D指令?___
A. FMGC或ELAC
B. ELAC或FAC
C. FMGC或FAC
D. 不确定
【单选题】
偏航阻尼系统动力输出环路如何监控?___
A. 将FAC的CMD部分和MONITOR部分进行比较
B. 比较偏航指令和方向盘舵位置反馈
C. 通过转换逻辑
D. 不监控
【单选题】
偏航阻尼作动筒动作时,脚蹬是否运动?___
A. 如果液压系统增压,脚蹬会运动
B. 在人工方式(AP未衔接时),脚蹬会运动
C. 不会
D. 不确定
【单选题】
当alphafloor探测到后:___
A. 自动推力脱开
B. 自动驾驶仪接通
C. 自动推力自动接通并控制发动机在全推力
D. 不确定
【单选题】
何时无风切变探测功能?___
A. 襟翼/缝翼放出时
B. 襟翼/缝翼全部放出时
C. 襟翼/缝翼收上时
D. 起落架收上时
【单选题】
速度变化趋势在速度带上如何显示?___
A. 为一绿点
B. 为一黄色箭头,对应15秒后的空速
C. 为一黄色箭头,对应10秒后的空速
D. 其它
【单选题】
速度带上2条黄色短划线代表:___
A. 最佳飞机操纵速度
B. 最大放襟翼/缝翼(到手柄上下一个位置)速度
C. 对于一给定构型,可选最大速度
D. 其它
【单选题】
速度带上绿圈在地面会显示吗?___
A. 不会,只在空中显示
B. 只要发动机运转,会显示
C. 不会,只在空中襟翼/缝翼放下时显示
D. 不确定
【单选题】
飞机处于光洁形态和正常法则。当飞行增稳计算机探测到过大的迎角时:___
A. 失速警告起动
B. FMA上闪烁“THRLK”(推力锁定)
C. α平台功能工作
D. 不确定
【单选题】
用于α平台探测必需的参数是:___
A. 飞机最小速度
B. 飞机重量
C. 飞机最大速度
D. 飞机迎角
【单选题】
当两个偏航阻尼器的功能都接通时:___
A. 偏航阻尼器1优先,偏航阻尼器作动筒2随动
B. 偏航阻尼器2优先,偏航阻尼器作动筒1随动
C. 偏航阻尼器1和2工作,两个作动筒增压
D. 液压装置决定偏航阻尼器优先权
【单选题】
飞行增稳计算机(FAC)何时计算方向舵行程限制:___
A. 只在自动驾驶接通时
B. 只在低速时
C. 只在升降舵副翼计算机(ELAC)失效时
D. 在任何时候
【单选题】
在着陆方式,AP接通,偏航阻尼器作动筒由谁控制?___
A. 由飞行增稳计算机(FAC)计算的偏航指令
B. 由飞行增稳计算机(FAC)计算的荷兰滚阻尼指令
C. 由飞行增稳计算机(FAC)计算的转弯协调指令
D. 由FMGC通过飞行增稳计算机(FAC)计算的AP偏航指令
【单选题】
自动驾驶接通时,方向舵通常由谁控制:___
A. FMGC(飞行管理引导计算机)
B. FAC(飞行增稳计算机)
C. ELAC(升降舵副翼计算机)
D. SEC(扰流板升降舵计算机)