【单选题】
Which storage feature always requires the use of third-party software on ESXi?___
A. Hardware Acceleration for NAS devices
B. VVOL
C. Hardware Acceleration for Block
D. evices
查看试卷，进入试卷练习
微信扫一扫，开始刷题
相关试题
【单选题】
An ESXi host's VMCA-Signed certificate has expired. How can the certificate be renewed?___
A. In the vSphere Web Client, browse to the host in question. Click the Manage tab and select settings. Select System and click Certificate, then click the Renew button.
B. In the vSphere Web Client, browse to the host in question. Click the Manage tab and select settings. Select System and click Certificate, then click the Refresh CA Certificates button.
C. Run the command /sbin/generate-certificates on the affected host.
D. Disconnect the host from vCenter Server and reconnect it.
【单选题】
Which is the correct order for upgrading vSphere components?___
A. vCenter Server, ESXi hosts, VMware Tools, Virtual Machine hardware
B. VMware Tools, Virtual Machine hardware, ESXi hosts, vCenter Server
C. vCenter Server, Virtual Machine hardware, VMware tools, ESXi hosts
D. ESXi hosts, vCenter Server, Virtual Machine hardware, VMware Tools
【单选题】
Which iSCSI initiator type can be used with any network interface card?___
A. Software iSCSI initiator
B. Software FCoE adapter
C. Hardware Independent iSCSI initiator
D. Hardware Dependent iSCSI initiator
【单选题】
An administrator is attempting to power on a virtual machine with 32GB of memory. The operation fails with the following error: <Could not power on VM: No space left on device> <Checking the space on the virtual machine's datastore, there is 30GB free.> Which action would allow the VM to power on?___
A. Set a 2GB memory reservation on the VM.
B. Mount the virtual disk from the affected VM on to another virtual machine and free up space from within the OS.
C. Enable vSphere HD admission control on the cluster in which the VM resides.
D. Set a 2GB memory limit on the VM.
【单选题】
An administrator attempts to manually reclaim space on thin-provisioned VMFS6 volumes but finds that no additional space is being recovered. Which could be causing this?___
A. vSphere 6.5 does not support manual UNMAP.
B. The manual UNMAP operation has been moved to the vSphere web client.
C. The VASA version is use is incompatible.
D. UNMAP is automated for VMFS6.
【单选题】
An administrator has upgraded to vSphere 6.5 and also wants to use Kerberos authentication for NFS. Which can be done to the existing NFSv3 volumes to enable this feature?___
A. Perform a storage rescan on VMFS volumes.
B. Unmount the NFSv3 datastore, and then mount as NFSv4.1 datastore.
C. Nothing. All NFSv3 mounted datastores are upgraded automatically during vSphere upgrades.
D. Perform a scan of new storage devices.
【单选题】
An administrator wants to restore the vCenter Server Appliance 6.5 from backup. Where can this be accomplished?___
A. from the ESXi Host Client
B. from the VMware vSphere Appliance Management Interface
C. from within the VMware vSphere Web Client
D. from the vCenter Server Appliance Installer
【单选题】
The administrator wants to power on VM-K2, which has a 2GHz CPU reservation. VM-M1, VM-M2, and VM-K1 are all powered on. VM-K2 is not powered on. The exhibit shows the parent and child resource reservations. If Resource Pool RP-KID is configured with an expandable reservation, which statement is true?___
A. VM-K2 will be unable to power on because there are insufficient resources.
B. VM-K2 will be able to power on since resource pool RP-KID has 2GHz available.
C. VM-K2 will be unable to power on because only 2GHz are reserved for RP-KID.
D. VM-K2 will receive resource priority and will be able to power on this scenario.
【单选题】
Which is the block size on the VMFS6 datastore?___
A. All small and large file blocks are 8MB.
B. All small and large file blocks are 1MB.
C. Small file blocks are 512KB. large file blocks are 64MB.
D. Small file blocks are 1MB, large file blocks are 512MB.
【单选题】
When installing vCenter Converter Standalone, why must an administrator perform a client-server installation instead of a local installation?___
A. to manage conversion tasks remotely
B. to convert virtual machines as well as physical machines
C. to allow installation of the Converter agent on remote source machines
D. to hot clone physical or virtual machines
【单选题】
Which is required by vCenter Converter Standalone to convert a physical Red Hat Enterprise Linux 7 machine to a virtual machine?___
A. The Linux machine must be powered off.
B. The Linux machine must have the SSH daemon started.
C. The Linux machine must use a static IP address.
D. The Linux machine must have a fully-qualified domain name.
【单选题】
An administrator is troubleshooting network communications between a vCenter Server and an ESXi 6.5 host. Which log shows the related events between these components?___
A. /var/log/fdm.log
B. /var/log/vpxa.log
C. /var/log/hostd.log
D. /var/log/auth.log
【单选题】
An administrator has recently upgraded from vSphere 6.0 to 6.5, and can no longer see the software iSCSI named vmhba33. Which could be the reason for this?___
A. The upgrade has changed the vmhba name.
B. vSphere 6.5 automates iSCSI configurations.
C. vSphere 6.5 no longer supports software iSCSI.
D. The upgrade has deleted the vmhba.
【单选题】
An administrator is trying to vMotion a VM from his datacenter to a recovery site. Which is the maximum allowed RTT (Round-Trip Time) latency between source and destination host?___
A. 100 milliseconds
B. 150 milliseconds
C. 15 milliseconds
D. 10 milliseconds
【单选题】
Which is required for configuring iSCSI Software Adapter network port binding?___
A. VMkernel of the iSCSI traffic must be load balanced using Route based on IP Hash algorithm.
B. VMkernel of the iSCSI traffic must be load balanced using Route based on Source Virtual Port ID algorithm.
C. VMkernel of the iSCSI traffic must be load balanced using Route based on Source MAC Hash algorithm.
D. VMkernel of the iSCSI traffic must be bound to only one active network adapter.
【单选题】
In vSphere Data Protection 6.1, which is the function of a Backup Verification job?___
A. None. Backup Verification job is not a feature of vSphere Data Protection
B. It is a manual task -Power it on -Verify the guest OS -Check started applications
C. It is an automatic process -Restore a virtual machine -Power it on -Verify that the guest OS is booted by communicating with the Backup Verification agent
D. It is an automatic process -Restore a virtual machine -Power it on -Verify that the guest OC is booted by detecting the VMware ToolsTM "heartbeats"
【单选题】
An administrator has enabled vSphere Distributed Switch Health Check. The hosts connected to that Distributed Switch all display an alert:< vSphere Distributed Switch MTU supported status > .The administrator has all of the VMkernel ports MTU sizes set to 1600. Which action will remedy this problem?___
A. Configure the Distributed Switch to MTU 9100.
B. Disconnect and reconnect the physical network cable.
C. Configure the physical switch to MTU 1600.
D. Disable the Distributed Switch MTU.
【单选题】
Which Host Profile Subprofile configuration is used to configure firewall settings for ESXi hosts?___
A. Advanced Configuration Settings
B. General System Settings
C. Security
D. Networking
【单选题】
Where would a vSphere administrator find general vCenter Server logs on a vCenter Server Appliance?___
A. /var/log/vmware/vpxd/
B. /var/log/messages
C. /etc/vmware-vpx/
D. /var/log/vmware/vsan-health/
【单选题】
An administrator wishes to enable network port mirroring based on source port. Which feature should be enabled?___
A. vSphere standard switch port
B. ERSPAN
C. NSX Virtual Wire
D. VLAN
【单选题】
Which CLI command shows the physical uplink status for a vmnic?___
A. esxcli network ip connection list
B. esxcli network ip neighbor list
C. esxcli network nic get
D. esxcli network nic list
【单选题】
Which is the maximum number of block devices (LUNs) that are supported by ESXi hosts that are running version 6.5?___
A. 1024
B. 512
C. 2048
D. 256
【单选题】
When performing a vCenter Server 5.5 for Windows with Microsoft SQL Server Express database migration to vCenter Server Appliance 6.5, which will be the target database?___
A. Microsoft SQL Server Express 2012R2
B. Microsoft SQL Server Standard 2012R2
C. PostgreSQL
D. Oracle DB 11g
【单选题】
An administrator has multiple vCenter Server 6.5 systems but cannot enable Storage I/O Control (SIOC) on a datastore shared by ESXi hosts managed by the vCenter Server systems. Which action should the administrator take to resolve the issue?___
A. Unmount the datastore and then enable SIOC on the vCenter Server system.
B. Configure the datastore to be managed by a single vCenter Server system.
C. Configure Storage DRS and then enable SIOC on the vCenter Server system.
D. Enable Raw Device Mapping (RDM) on the
E. SXi hosts.
【单选题】
“OneAppServer” is a VM template stored in a content library named “LibraryOne”, but the vSphere administrator is not able to use this template for deployment. Why is the administrator unable to deploy OneAppServer?___
A. OneAppServer must be updated before it can be deployed.
B. LibraryOne is a subscribed library and OneAppServer is not downloaded yet.
C. LibraryOne is published and optimized for syncing over HTTP.
D. OneAppServer was imported from a local file on the system.
【单选题】
An administrator sets the Failover Capacity for both CPU and Memory at 25%. Based on the Exhibit below, how much of the cluster’s total CPU resources are still available to power on additional virtual machines?___
A. 45%
B. 25%
C. 70%
D. 60%
【单选题】
Which statement applies to the vSphere Replication appliance?___
A. Only one vSphere Replication appliance can be deployed per vCenter Server instance.
B. VMware Tools in the vSphere Replication appliance can be upgraded.
C. A single vSphere Replication appliance can manage a maximum of 4000 replications.
D. vSphere Replication is available only with the vSphere
E. ssentials Plus license.
【单选题】
Which esxcli namespace can a vSphere Administrator use to adjust the queue depth?___
A. esxcli system module parameters
B. esxcli storage core device
C. esxcli system module set
D. esxcli storage core adapter
【单选题】
Which statement regarding datastore clusters meets VMware’s recommended best practices?___
A. Clusters should contain only datastores presented from the same storage array.
B. Clusters should contain only datastores with equal hardware acceleration capability.
C. Clusters should contain only datastores with the same capacity.
D. Clusters should contain only datastores using the same connection method (iSCSI, FC, etc.).
【单选题】
What VM Monitoring setting would ensure that the maximum reset window for a virtual machine is 24 hours?___
A. Medium
B. Low
C. High
D. Normal
【单选题】
What is the default space threshold for vSphere Storage DRS?___
A. 80%
B. 70%
C. 90%
D. 95%
【单选题】
Which is the correct sequence to upgrade a vSphere infrastructure?___
A. vCenter Server>ESXi host> VMware Tools>VM compatibility
B. ESXi host>vCenter Server> VMware Tools>VM compatibility
C. vCenter host> ESXi host> VM compatibility> VMware Tools
D. ESXi host>vCenter Server> VM compatibility>VMware Tools
【单选题】
An administrator has a large boot from SAN cluster and wants to ensure consistent configuration by using host profiles. What special considerations are required for boot from SAN hosts?___
A. Change the “Device is shared clusterwide” setting to “false” in the host profile.
B. Verify that the boot LUN is correctly identified as the boot device in the host profile.
C. The boot from SAN device must report as a local device.
D. Host profiles are incompatible with boot from SAN hosts.
【单选题】
When using VMware Converter to import a Windows server and improve the consistency of the destination virtual machine, which optional step can be performed immediately prior to powering down the source server?___
A. Perform a final synchronization task.
B. Remove the server from the network.
C. Uninstall production applications.
D. Remove the server from the Active Directory domain.
【单选题】
Restoration of the vCenter Server Appliance is accomplished using which interface?___
A. vSphere Web Client
B. vSphere Client
C. vCenter Server Appliance Management Interface
D. vCenter Server Appliance GUI Installer
【单选题】
When attempting to migrate a virtual machine to another host in the same cluster, the error message, “Select a valid compute resource” returns. What could cause this error?___
A. Both hosts run different versions of ESXi.
B. Both hosts are not sharing the same datastore.
C. VMware Tools is not installed.
D. Virtual machine has an ISO attached.
【单选题】
When will vSphere Data Protection delete the expired backup image of a Platform Service Controller?___
A. Immediately after the retention period has expired.
B. After the expired backup image is restored.
C. During the next backup window following expiry.
D. During the next maintenance window following expiry.
【单选题】
Group A has permission to download files in Content Library. Group B does not have permission to download files in Content Library. If a user is a member of both groups, what will be the result?___
A. The user cannot download file from Content Library.
B. The user can download file from Content Library.
C. The user cannot access Content Library.
D. The user can access Content Library.
【单选题】
An administrator is trying to set up Host Partial Failure Response, but the Automated option is grayed out. What can the administrator change to enable the Automated option?___
A. Change the vSphere DRS Automation level to Partially Automated.
B. Change the vSphere DRS Automation level to Fully Automated.
C. Enable vSphere HA Host Monitoring.
D. Change the vSphere DPM Automation level to Automatic.
【单选题】
When you attempt to open a virtual machine console from the vSphere Web Client, the console does not connect. The following error message appears:<HTTP ERROR 404> <Problem accessin/.Reason: Not Found>. Why did not connect?___
A. Port 443 is in use.
B. Port 9443 is in use.
C. Port 8443 is in use.
D. Port 22443 is in use.
推荐试题
【单选题】
T68型镗床的进给电动机采用了___方法。
A. 频敏变阻器启动
B. 全压启动
C. Y一△启动
D. △一YY启动
【单选题】
T68型镗床的主轴电动机采用了___方法。
A. 频敏变阻器启动
B. Y一△启动
C. 全压启动
D. △-YY启动
【单选题】
T68型镗床的主轴电动机采用了___调速方法。
A. △-YY变极
B. Y-YY变极
C. 变频
D. 变转差率
【单选题】
T68型镗床的主轴电动机采用了近似___的调速方式。
A. 恒转速
B. 通风机型
C. 恒转矩
D. 恒功率
【单选题】
T68型镗床的主轴电动机M1采用了___的停车方法。
A. 能耗制动
B. 反接制动
C. 电磁抱闸制动
D. 机械摩擦制动
【单选题】
T68型镗床的主电路、控制电路和照明电路由___实现短路保护。
A. 速度继电器
B. 中间继电器
C. 熔断器
D. 热继电器
【单选题】
T68型镗床的主轴电动机由___实现过载保护。
A. 熔断器
B. 过电流继电器
C. 速度继电器
D. 热继电器
【单选题】
T68型管床主轴电动机的高速与低速之间的互锁保护由___实现。
A. 速度继电器常开触点
B. 接触器常闭触点
C. 中间继电器常开触点
D. 热继电器常闭触点
【单选题】
T68型镗床主轴电动机只能工作在低速挡，不能高速挡工作的原因是___。
A. 速度继电器故障
B. 行程开关SQ故障
C. 热继电器故障
D. 熔断器故障
【单选题】
X62W型铣床电气线路的控制电路由控制变压器TC、熔断器FU2和FU3___、位置开关SQ1~SQ7、速度继电器KS、转换开关SA1~SA3、热继电器KH1～KH3等组成。
A. 按钮SB1~SB6
B. 电动机M1-M3
C. 快速移动电磁铁YA
D. 电源总开关QS
【单选题】
T68型管床电气控制主电路由___、熔断器FU1和FU2、接触器KM1~KM7、热继电器KH、电动机Ml和M2等组成。
A. 电源开关QS
B. 速度继电器KS
C. 行程开关SQ1~S08
D. 时间继电器KT
【单选题】
反相比例运放电路应加的反馈类型是___负反馈。
A. 电压串联
B. 电压并联
C. 电流并联
D. 电流串联
【单选题】
三相可控整流触发电路调速时，要使三相锯齿波的波形高度一致，斜率相同，相位互差___。
A. 60°
B. 120°
C. 90°
D. 180°
【单选题】
滞回比较器的比较电压是___。
A. 固定的
B. 随输出电压而变化
C. 输出电压可正可负
D. 与输出电压无关
【单选题】
实用的调节器线路，一般应有抑制零漂、___、输入滤波、功率放大、比例系数可调、寄生振荡消除等附属电路。
A. 限幅
B. 输出滤波
C. 温度补偿
D. 整流
【单选题】
若使三极管具有电流放大能力，必须满足的外部条件是___。
A. 发射结正偏、集电结正偏
B. 发射结反偏、集电结反偏
C. 发射结正偏、集电结反偏
D. 发射结反偏、集电结正偏
【单选题】
下列不属于常用输入单元电路的功能有___。
A. 取信号能力强
B. 抑制干扰能力强
C. 具有一定信号放大能力
D. 带负载能力强
【单选题】
下列不属于常用中间电子单元电路的功能有___。
A. 传输信号能力强
B. 信号波形失真小
C. 电压放大能力强
D. 取信号能力强
【单选题】
下列不属于集成运放电路线性应用的是___。
A. 加法运算电路
B. 减法运算电路
C. 积分电路
D. 过零比较器
【单选题】
集成运放电路非线性应用要求___。
A. 开环或加正反馈
B. 加负反馈
C. 输入信号要大
D. 输出要加限幅电路
【单选题】
下列不属于集成运放电路非线性应用的是___。
A. 加法运算电路
B. 滞回比较器
C. 非过零比较器
D. 过零比较器
【单选题】
组合逻辑电路常用的分析方法有___。
A. 逻辑代数化简
B. 真值表
C. 逻辑表达式
D. 以上都是
【单选题】
组合逻辑电路的分析是___。
A. 根据已有电路图进行分析
B. 画出对应的电路图
C. 根据逻辑结果进行分析
D. 画出对应的输出时序图
【单选题】
组合逻辑电路的设计是___
A. 根据已有电路图进行分析
B. 找出对应的输入条件
C. 根据逻辑结果进行分析
D. 画出对应的输出时序图
【单选题】
组合逻辑电路的比较器功能为___。
A. 只是逐位比较
B. 只是最高位比较
C. 高位比较有结果，低位可不比较
D. 只是最低位比较
【单选题】
过零比较器可将输入正弦波变换为___。
A. 三角波
B. 锯齿波
C. 尖顶脉冲波
D. 方波
【单选题】
组合逻辑电路的译码器功能有___。
A. 变量译码器
B. 显示译码器
C. 数码译码器
D. 以上都是
【单选题】
组合逻辑电路的编码器功能为___。
A. 用一位二进制数来表示
B. 用多位二进制数来表示输入信号
C. 用十进制数来表示输入信号
D. 用十进制数来表示二进制信号
【单选题】
下列不属于组合逻辑电路的加法器为___。
A. 半加器
B. 全加器
C. 多位加法器
D. 计数器
【单选题】
下列不能用于构成组合逻辑电路的是___。
A. 与非门
B. 或非门
C. 异或门
D. 触发器
【单选题】
集成与非门的多余引脚___时，与非门被封锁。
A. 悬空
B. 接高电平
C. 接低电平
D. 并接
【单选题】
集成或非门的多余引脚___时，或非门被封锁。
A. 悬空
B. 接高电平
C. 接低电平
D. 并接
【单选题】
集成与非门被封锁，应检查其多余引脚是否接了___。
A. 悬空
B. 高电平
C. 低电平
D. 并接
【单选题】
时序逻辑电路的分析方法有___。
A. 列出状态方程
B. 列出驱动方程
C. 列出状态表
D. 以上都是
【单选题】
时序逻辑电路的驱动方程是___。
A. 各个触发器的输入表达式
B. 各个门电路的输入表达式
C. 各个触发器的输出表达式
D. 各个门电路的输出表达式
【单选题】
时序逻辑电路的状态表是由___。
A. 状态方程算出
B. 驱动方程算出
C. 触发器的特性方程算出
D. 时钟脉冲表达式算出
【单选题】
下列不属于时序逻辑电路的计数器进制的为___。
A. 二进制计数器
B. 十进制计数器
C. N进制计数器
D. 脉冲计数器
【单选题】
时序逻辑电路的计数器按与时钟脉冲关系可分为___。
A. 加法计数器
B. 减法计数器
C. 可逆制计数器
D. 以上都是
【单选题】
时序逻辑电路的输出端取数如有问题会产生___。
A. 时钟脉冲混乱
B. 置数端无效
C. 清零端无效
D. 计数模错误
