【单选题】
What tool can capture network traffic at the uplinks, or vSwitch, or virtual port levels?___
A. tcpdump-uw
B. wireshark
C. pktcap-uw
D. pcap
查看试卷，进入试卷练习
微信扫一扫，开始刷题
相关试题
【单选题】
Which storage feature always requires the use of third-party software on ESXi?___
A. Hardware Acceleration for NAS devices
B. VVOL
C. Hardware Acceleration for Block
D. evices
【单选题】
An ESXi host's VMCA-Signed certificate has expired. How can the certificate be renewed?___
A. In the vSphere Web Client, browse to the host in question. Click the Manage tab and select settings. Select System and click Certificate, then click the Renew button.
B. In the vSphere Web Client, browse to the host in question. Click the Manage tab and select settings. Select System and click Certificate, then click the Refresh CA Certificates button.
C. Run the command /sbin/generate-certificates on the affected host.
D. Disconnect the host from vCenter Server and reconnect it.
【单选题】
Which is the correct order for upgrading vSphere components?___
A. vCenter Server, ESXi hosts, VMware Tools, Virtual Machine hardware
B. VMware Tools, Virtual Machine hardware, ESXi hosts, vCenter Server
C. vCenter Server, Virtual Machine hardware, VMware tools, ESXi hosts
D. ESXi hosts, vCenter Server, Virtual Machine hardware, VMware Tools
【单选题】
Which iSCSI initiator type can be used with any network interface card?___
A. Software iSCSI initiator
B. Software FCoE adapter
C. Hardware Independent iSCSI initiator
D. Hardware Dependent iSCSI initiator
【单选题】
An administrator is attempting to power on a virtual machine with 32GB of memory. The operation fails with the following error: <Could not power on VM: No space left on device> <Checking the space on the virtual machine's datastore, there is 30GB free.> Which action would allow the VM to power on?___
A. Set a 2GB memory reservation on the VM.
B. Mount the virtual disk from the affected VM on to another virtual machine and free up space from within the OS.
C. Enable vSphere HD admission control on the cluster in which the VM resides.
D. Set a 2GB memory limit on the VM.
【单选题】
An administrator attempts to manually reclaim space on thin-provisioned VMFS6 volumes but finds that no additional space is being recovered. Which could be causing this?___
A. vSphere 6.5 does not support manual UNMAP.
B. The manual UNMAP operation has been moved to the vSphere web client.
C. The VASA version is use is incompatible.
D. UNMAP is automated for VMFS6.
【单选题】
An administrator has upgraded to vSphere 6.5 and also wants to use Kerberos authentication for NFS. Which can be done to the existing NFSv3 volumes to enable this feature?___
A. Perform a storage rescan on VMFS volumes.
B. Unmount the NFSv3 datastore, and then mount as NFSv4.1 datastore.
C. Nothing. All NFSv3 mounted datastores are upgraded automatically during vSphere upgrades.
D. Perform a scan of new storage devices.
【单选题】
An administrator wants to restore the vCenter Server Appliance 6.5 from backup. Where can this be accomplished?___
A. from the ESXi Host Client
B. from the VMware vSphere Appliance Management Interface
C. from within the VMware vSphere Web Client
D. from the vCenter Server Appliance Installer
【单选题】
The administrator wants to power on VM-K2, which has a 2GHz CPU reservation. VM-M1, VM-M2, and VM-K1 are all powered on. VM-K2 is not powered on. The exhibit shows the parent and child resource reservations. If Resource Pool RP-KID is configured with an expandable reservation, which statement is true?___
A. VM-K2 will be unable to power on because there are insufficient resources.
B. VM-K2 will be able to power on since resource pool RP-KID has 2GHz available.
C. VM-K2 will be unable to power on because only 2GHz are reserved for RP-KID.
D. VM-K2 will receive resource priority and will be able to power on this scenario.
【单选题】
Which is the block size on the VMFS6 datastore?___
A. All small and large file blocks are 8MB.
B. All small and large file blocks are 1MB.
C. Small file blocks are 512KB. large file blocks are 64MB.
D. Small file blocks are 1MB, large file blocks are 512MB.
【单选题】
When installing vCenter Converter Standalone, why must an administrator perform a client-server installation instead of a local installation?___
A. to manage conversion tasks remotely
B. to convert virtual machines as well as physical machines
C. to allow installation of the Converter agent on remote source machines
D. to hot clone physical or virtual machines
【单选题】
Which is required by vCenter Converter Standalone to convert a physical Red Hat Enterprise Linux 7 machine to a virtual machine?___
A. The Linux machine must be powered off.
B. The Linux machine must have the SSH daemon started.
C. The Linux machine must use a static IP address.
D. The Linux machine must have a fully-qualified domain name.
【单选题】
An administrator is troubleshooting network communications between a vCenter Server and an ESXi 6.5 host. Which log shows the related events between these components?___
A. /var/log/fdm.log
B. /var/log/vpxa.log
C. /var/log/hostd.log
D. /var/log/auth.log
【单选题】
An administrator has recently upgraded from vSphere 6.0 to 6.5, and can no longer see the software iSCSI named vmhba33. Which could be the reason for this?___
A. The upgrade has changed the vmhba name.
B. vSphere 6.5 automates iSCSI configurations.
C. vSphere 6.5 no longer supports software iSCSI.
D. The upgrade has deleted the vmhba.
【单选题】
An administrator is trying to vMotion a VM from his datacenter to a recovery site. Which is the maximum allowed RTT (Round-Trip Time) latency between source and destination host?___
A. 100 milliseconds
B. 150 milliseconds
C. 15 milliseconds
D. 10 milliseconds
【单选题】
Which is required for configuring iSCSI Software Adapter network port binding?___
A. VMkernel of the iSCSI traffic must be load balanced using Route based on IP Hash algorithm.
B. VMkernel of the iSCSI traffic must be load balanced using Route based on Source Virtual Port ID algorithm.
C. VMkernel of the iSCSI traffic must be load balanced using Route based on Source MAC Hash algorithm.
D. VMkernel of the iSCSI traffic must be bound to only one active network adapter.
【单选题】
In vSphere Data Protection 6.1, which is the function of a Backup Verification job?___
A. None. Backup Verification job is not a feature of vSphere Data Protection
B. It is a manual task -Power it on -Verify the guest OS -Check started applications
C. It is an automatic process -Restore a virtual machine -Power it on -Verify that the guest OS is booted by communicating with the Backup Verification agent
D. It is an automatic process -Restore a virtual machine -Power it on -Verify that the guest OC is booted by detecting the VMware ToolsTM "heartbeats"
【单选题】
An administrator has enabled vSphere Distributed Switch Health Check. The hosts connected to that Distributed Switch all display an alert:< vSphere Distributed Switch MTU supported status > .The administrator has all of the VMkernel ports MTU sizes set to 1600. Which action will remedy this problem?___
A. Configure the Distributed Switch to MTU 9100.
B. Disconnect and reconnect the physical network cable.
C. Configure the physical switch to MTU 1600.
D. Disable the Distributed Switch MTU.
【单选题】
Which Host Profile Subprofile configuration is used to configure firewall settings for ESXi hosts?___
A. Advanced Configuration Settings
B. General System Settings
C. Security
D. Networking
【单选题】
Where would a vSphere administrator find general vCenter Server logs on a vCenter Server Appliance?___
A. /var/log/vmware/vpxd/
B. /var/log/messages
C. /etc/vmware-vpx/
D. /var/log/vmware/vsan-health/
【单选题】
An administrator wishes to enable network port mirroring based on source port. Which feature should be enabled?___
A. vSphere standard switch port
B. ERSPAN
C. NSX Virtual Wire
D. VLAN
【单选题】
Which CLI command shows the physical uplink status for a vmnic?___
A. esxcli network ip connection list
B. esxcli network ip neighbor list
C. esxcli network nic get
D. esxcli network nic list
【单选题】
Which is the maximum number of block devices (LUNs) that are supported by ESXi hosts that are running version 6.5?___
A. 1024
B. 512
C. 2048
D. 256
【单选题】
When performing a vCenter Server 5.5 for Windows with Microsoft SQL Server Express database migration to vCenter Server Appliance 6.5, which will be the target database?___
A. Microsoft SQL Server Express 2012R2
B. Microsoft SQL Server Standard 2012R2
C. PostgreSQL
D. Oracle DB 11g
【单选题】
An administrator has multiple vCenter Server 6.5 systems but cannot enable Storage I/O Control (SIOC) on a datastore shared by ESXi hosts managed by the vCenter Server systems. Which action should the administrator take to resolve the issue?___
A. Unmount the datastore and then enable SIOC on the vCenter Server system.
B. Configure the datastore to be managed by a single vCenter Server system.
C. Configure Storage DRS and then enable SIOC on the vCenter Server system.
D. Enable Raw Device Mapping (RDM) on the
E. SXi hosts.
【单选题】
“OneAppServer” is a VM template stored in a content library named “LibraryOne”, but the vSphere administrator is not able to use this template for deployment. Why is the administrator unable to deploy OneAppServer?___
A. OneAppServer must be updated before it can be deployed.
B. LibraryOne is a subscribed library and OneAppServer is not downloaded yet.
C. LibraryOne is published and optimized for syncing over HTTP.
D. OneAppServer was imported from a local file on the system.
【单选题】
An administrator sets the Failover Capacity for both CPU and Memory at 25%. Based on the Exhibit below, how much of the cluster’s total CPU resources are still available to power on additional virtual machines?___
A. 45%
B. 25%
C. 70%
D. 60%
【单选题】
Which statement applies to the vSphere Replication appliance?___
A. Only one vSphere Replication appliance can be deployed per vCenter Server instance.
B. VMware Tools in the vSphere Replication appliance can be upgraded.
C. A single vSphere Replication appliance can manage a maximum of 4000 replications.
D. vSphere Replication is available only with the vSphere
E. ssentials Plus license.
【单选题】
Which esxcli namespace can a vSphere Administrator use to adjust the queue depth?___
A. esxcli system module parameters
B. esxcli storage core device
C. esxcli system module set
D. esxcli storage core adapter
【单选题】
Which statement regarding datastore clusters meets VMware’s recommended best practices?___
A. Clusters should contain only datastores presented from the same storage array.
B. Clusters should contain only datastores with equal hardware acceleration capability.
C. Clusters should contain only datastores with the same capacity.
D. Clusters should contain only datastores using the same connection method (iSCSI, FC, etc.).
【单选题】
What VM Monitoring setting would ensure that the maximum reset window for a virtual machine is 24 hours?___
A. Medium
B. Low
C. High
D. Normal
【单选题】
What is the default space threshold for vSphere Storage DRS?___
A. 80%
B. 70%
C. 90%
D. 95%
【单选题】
Which is the correct sequence to upgrade a vSphere infrastructure?___
A. vCenter Server>ESXi host> VMware Tools>VM compatibility
B. ESXi host>vCenter Server> VMware Tools>VM compatibility
C. vCenter host> ESXi host> VM compatibility> VMware Tools
D. ESXi host>vCenter Server> VM compatibility>VMware Tools
【单选题】
An administrator has a large boot from SAN cluster and wants to ensure consistent configuration by using host profiles. What special considerations are required for boot from SAN hosts?___
A. Change the “Device is shared clusterwide” setting to “false” in the host profile.
B. Verify that the boot LUN is correctly identified as the boot device in the host profile.
C. The boot from SAN device must report as a local device.
D. Host profiles are incompatible with boot from SAN hosts.
【单选题】
When using VMware Converter to import a Windows server and improve the consistency of the destination virtual machine, which optional step can be performed immediately prior to powering down the source server?___
A. Perform a final synchronization task.
B. Remove the server from the network.
C. Uninstall production applications.
D. Remove the server from the Active Directory domain.
【单选题】
Restoration of the vCenter Server Appliance is accomplished using which interface?___
A. vSphere Web Client
B. vSphere Client
C. vCenter Server Appliance Management Interface
D. vCenter Server Appliance GUI Installer
【单选题】
When attempting to migrate a virtual machine to another host in the same cluster, the error message, “Select a valid compute resource” returns. What could cause this error?___
A. Both hosts run different versions of ESXi.
B. Both hosts are not sharing the same datastore.
C. VMware Tools is not installed.
D. Virtual machine has an ISO attached.
【单选题】
When will vSphere Data Protection delete the expired backup image of a Platform Service Controller?___
A. Immediately after the retention period has expired.
B. After the expired backup image is restored.
C. During the next backup window following expiry.
D. During the next maintenance window following expiry.
【单选题】
Group A has permission to download files in Content Library. Group B does not have permission to download files in Content Library. If a user is a member of both groups, what will be the result?___
A. The user cannot download file from Content Library.
B. The user can download file from Content Library.
C. The user cannot access Content Library.
D. The user can access Content Library.
【单选题】
An administrator is trying to set up Host Partial Failure Response, but the Automated option is grayed out. What can the administrator change to enable the Automated option?___
A. Change the vSphere DRS Automation level to Partially Automated.
B. Change the vSphere DRS Automation level to Fully Automated.
C. Enable vSphere HA Host Monitoring.
D. Change the vSphere DPM Automation level to Automatic.
推荐试题
【单选题】
两线间材料的堆高不得超过轨面（ ）。 ___
A. 200mm
B. 250mm
C. 300mm
D. 350mm
【单选题】
不合格道岔整修后，在（）分及以上者，可评为合格。 ___
A. 0.9
B. 0.85
C. 0.8
D. 0.6
【单选题】
正线及试车线上插入的个别短轨长度不得短于（ ），并不得连续插入两根及以上。 ___
【单选题】
在测量轨道线路曲线正矢时，应在钢轨踏面下( )处测量正矢。 ___
A. 15mm
B. 16mm
C. 17mm
D. 18mm
【单选题】
轨道线路施工作业时需在施工区域前后（ ）米范围设置1盏红闪灯。 ___
A. 25m
B. 50m
C. 75m
D. 100m
【单选题】
曲线地段，未被平衡欠超高，一般应（ ）61mm，未被平衡过超高不得大于30mm。 ___
A. 大于
B. 不大于
C. 小于
D. 不小于
【单选题】
路基维修单项作业验收，按路基维修单项作业验收标准进行。验收采用评分的办法，维修质量分优良、合格两级，每单项作业以( )分为优良。 ___
A. 24~30
B. 19~23
C. 19~24
D. 18以下
【单选题】
路基维修单项作业验收，按路基维修单项作业验收标准进行。验收采用评分的办法，维修质量分优良、合格两级，每单项作业以( )分为合格。 ___
A. 24~30
B. 19~23
C. 19~24
D. 18以下
【单选题】
路基维修单项作业验收，按路基维修单项作业验收标准进行。验收采用评分的办法，维修质量分优良、合格两级，每单项作业以( )分为不合格。 ___
A. 24~30
B. 19~23
C. 19~24
D. 18以下
【单选题】
路基计划维修和小型病害整治工程完工后，应执行（ ）验收制。 ___
【单选题】
搬运一根长12.5m的43kg/m钢轨，若每人负重不超过70kg，则至少需要（ ）人抬运。 ___
【单选题】
调高垫板应垫在大胶垫之间，一般情况下，每处调高垫板总厚度不超过（ ）。 ___
A. 5mm
B. 10mm
C. 20mm
D. 30mm
【单选题】
线路综合维修周期依据（ ）确定。 ___
A. 通过总重
B. 车辆总重
C. 机车轴重
D. 车辆轴重
【单选题】
当80km/h以下正线线路前后高低误差达到（ ）时，应进行经常保养作业。 ___
A. 5mm
B. 6mm
C. 7mm
D. 8mm
【单选题】
轨顶面剥落掉块，（ ）属钢轨折断。 ___
A. 长度超过50mm，深度超过8mm
B. 长度超过30mm，深度超过10mm
C. 长度超过30mm，深度超过8mm
D. 长度超过50mm，深度超过10mm
【单选题】
（ ）kg/m钢轨头部侧面磨耗超过17mm时为重伤钢轨。 ___
【单选题】
下列情况中，（ ）应对轨缝进行调整。 ___
A. 25m钢轨地段每千米总误差为75mm
B. 线路爬行量为15mm
C. 12.5m钢轨地段出现连续4个瞎缝
D. 12.5m钢轨地段出现连续2个轨缝大于构造轨缝
【单选题】
线路爬行量超过（ ）时应对轨缝进行调整。 ___
A. 15mm
B. 18mm
C. 20mm
D. 25mm
【单选题】
在无缝线路上焊接钢轨后，放行列车时，焊缝处轨温应降至( )。 ___
A. 100℃以下
B. 200℃以下
C. 300℃以下
D. 400℃以下
【单选题】
在无缝线路上，钢轨折断进行临时处理时，插入的短轨不得短于 ( )的同型钢轨，桂端钻孔，上接头夹板，用螺栓拧紧。 ___
A. 4m
B. 4.5m
C. 6m
D. 7m
【单选题】
在直线上的超高顺坡，无缓和曲线时不得大于( )。 ___
A. 15mm
B. 20mm
C. 25mm
D. 30mm
【单选题】
普通线路地段，12.5m钢轨每千米轨缝总误差超过( )，应进行轨缝调整。 ___
A. ±40mm
B. ±80mm
C. ±120mm
D. ±160mm
【单选题】
钢轨侧面磨耗在钢轨踏面下( )处测量。 ___
A. 16mm
B. 14mm
C. 18mm
D. 15mm
【单选题】
每段无缝线路应设位移观测桩不少于（ ）对 ___
【单选题】
观察列车从第一个公里标到第二个公里标所用时间为1min，则行车速度是( )km/h。 ___
【单选题】
若设置缓和曲线后中间圆曲线的长度不足( )，就会使一节车厢的全轴距跨在两个缓和曲线上，不利于行车的平稳。 ___
A. 20m
B. 30m
C. 40m
D. 50m
【单选题】
为了防止钢轨爬行，要求中间扣件阻力要（ ）轨枕底面的道床纵向阻力。 ___
A. 小于
B. 等于
C. 大于或等于
D. 大于
【单选题】
无缝线路在锁定轨温以下时，钢轨内部产生（ ）。 ___
A. 拉应力
B. 压应力
C. 剪压力
D. 拉应力与压应力
【单选题】
无缝线路锁定轨温规定左右股相对轨温差（ ）。 ___
A. 为零
B. 小于5℃
C. 小于或等于5℃
D. 在锁定轨温范围内
【单选题】
摩擦阻力的大小主要取决于接头螺栓（ ）和钢轨与夹板接触面之间的摩擦系数。 ___
A. 拉应力
B. 拉力
C. 压应力
D. 压力
【单选题】
曲线某点的拨道量为6mm，其前后两点正矢的影响量为（ ）。 ___
A. 前后两点和为6mm
B. 前后两点各为-6mm
C. 前后两点和为3mm
D. 前后两点各为-3mm
【单选题】
下列四种路基基床变形属于基床外表变形的为（ ）。 ___
A. 道碴槽
B. 道碴锅
C. 道碴窝
D. 路基面翻浆
【单选题】
铺设无缝线路，（ ）需要单独布置轨条。 ___
A. 桥梁
B. 隧道
C. 道口
D. 小半径曲线
【单选题】
进行线路大修时，曲线半径（ ）时，曲线不进行加宽。 ___
A. ＜350m
B. ≥350m
C. ＜650m
D. ≥650m
【单选题】
曲线轨距加宽递减如无缓和曲线，则在（ ）。 ___
A. 直线上递减，递减率一般不大于1‰
B. 直线和圆曲线各递减一半，递减率不大于1‰
C. 圆曲线上递减，递减率一般不大于1‰
D. 直线上递减，递减率一般不大于2‰
【单选题】
当350＞R≥300m时，轨距加宽（ ）。 ___
A. 0mm
B. 5mm
C. 10mm
D. 15mm
【单选题】
某曲线半径为400m，则圆曲线正矢为（ ）。 ___
A. 80mm
B. 100mm
C. 125mm
D. 150mm
【单选题】
钢轨接头采用相错式时，其相错量不得小于（ ）。 ___
A. 2m
B. 2.5m
C. 3m
D. 3.5m
【单选题】
无缝线路固定区长度不得短于（ ）。 ___
A. 50m
B. 75m
C. 100m
D. 150m
【单选题】
长轨条的焊缝部位工作边用直尺测量，矢度不得大于（ ）。 ___
A. 0.3mm
B. 0.5mm
C. 1mm
D. 2mm
