【单选题】
A storage administrator has reported that full utilization of all bandwidth from an ESXi 6.x host is not being seen. In troubleshooting the issue, the Adapter details are shown in the Exhibit. Based on the exhibit, what is cause of the issue? ___
A. The array is not setup to use the correct multipathing policy.
B. There are no virtual machines on the ESXi host.
C. Not all links are used because a path is disabled.
D. Another path needs to be configured.
查看试卷，进入试卷练习
微信扫一扫，开始刷题
相关试题
【单选题】
An administrator is migrating a powered-on virtual machine, as shown in the exhibit. Which option should be selected to perform a Storage vMotion of the VM? ___
A. Change storage only
B. Change VM compute resource only
C. Change both compute resource and storage, changing the compute resource first.
D. Change both compute resource and storage, changing the storage resource first.
【单选题】
An administrator is attempting to enable Storage I/O Control on a datastore, but it is failing. What is the likely reason for this failure? ___
A. The host is connected to a datastore is running on ESX 4.0.
B. The host is connected to a Fibre Channel storage array.
C. The datastore has multiple extents.
D. The datastore is managed by a single vCenter Server.
【单选题】
A mission-critical virtual machine built on vSphere 4.1 needs to be moved to an ESXi 6.x host.Which virtual hardware version is needed to move the virtual machine without upgrading? ___
【单选题】
An administrator is analyzing a virtual machine as shown in the Exhibit. What is the current long term risk for this virtual machine? ___
A. The virtual machine may run out of memory before April 27.
B. The virtual machine may continue to function after April 27.
C. The virtual machine has adequate memory configured for operation for the next 120 days.
D. The virtual machine has adequate memory reservation configured for operation for the next 120 days.
【单选题】
An administrator is monitoring a High Availability (HA) and Distributed Resource Scheduler (DRS) enabled cluster and has noticed that virtual machines in the cluster are being migrated without user intervention. Why is this happening? ___
A. The DRS Automation level is set to Fully Automated.
B. The Automation level is set to Automatic.
C. The
D. PM Threshold is set to Aggressive.
【单选题】
An administrator attempts to migrate a suspended virtual machine to a newly deployed vSphere 6.x cluster. The compatibility check fails. What condition could cause this behavior?___
A. The new vSphere 6.x cluster is running Intel CPUs instead of AMD CPUs.
B. A suspended virtual machine cannot be migrated.
C. The hardware virtualization feature of the CPU is not enabled on the new hosts.
D. A vSphere Distributed Switch is required to migrate a suspended virtual machine.
【单选题】
A vSphere administrator has been using vSphere in evaluation mode and now wants to deploy an environment that provides the same features. Which edition of vSphere provides similar functionality to evaluation mode? ___
A. Enterprise Plus
B. Enterprise
C. Standard
D. Essentials
【单选题】
A vSphere administrator has been using vSphere in evaluation mode and now wants to deploy an environment that provides the same features. Which edition of vSphere provides similar functionality to evaluation mode? ___
A. Enterprise Plus
B. Enterprise
C. Standard
D. Essentials
【单选题】
An administrator has just configured the IP address on an ESXi host from the Direct Console User Interface. How can the configuration be validated as correct without any additional tools?___
A. Add the host to vCenter Server and if it works, then all networking settings are ok.
B. Select the Test Management Network option from the DCUI.
C. Connect to the host with the vSphere Client and click the Test Network option.
D. Use PowerCLI to connect to the host and initiate a network test.
【单选题】
An administrator is installing vCenter Server for an environment that has 40 ESXi 6.x Hosts and 150 virtual machines. Which database would meet the minimal requirements needed for this task? ___
A. vFabric Postgres
B. Microsoft SQL Express 2008
C. Microsoft SQL Server 2014
D. Oracle 11g
【单选题】
What is a requirement when enabling a Virtual SAN cluster in an existing High Availability (HA) and Distributed Resource Scheduler (DRS) Cluster? ___
A. Disable DRS and HA before enabling Virtual SAN
B. Enable DRS before enabling Virtual SAN
C. Disable HA before enabling Virtual SAN
D. Enable Storage DRS before enabling Virtual SAN
【单选题】
The vSphere administrator attempts to connect to an ESXi host via an SSH client and receives the following security alert: The vSphere administrator needs to determine whether the RSA key fingerprint shown in the security alert is the fingerprint of the intended ESXi host. Which tool should the vSphere administrator use? ___
A. Direct Console User Interface
B. vSphere Client
C. vSphere Web Client
D. vSphere Management Assistant
【单选题】
An administrator needs to monitor traffic on vSwitches in a vSphere 6.x environment. Which option, if configured, would accomplish this task? ___
A. Forged Transmits
B. MAC Address Changes
C. Promiscuous Mode
D. Notify Switches
【单选题】
What is true regarding datastores on ESXi 6.x? ___
A. NFS 4.1 datastore does not support Fault Tolerance (FT)
B. VMFS3 and VMFS5 datastores can be newly created
C. NFS datastore can be concurrently mounted using NFS 4.1 on one host and NFS on another
D. NFS 3.0 datastore does not support Fault Tolerance (FT)
【单选题】
An administrator is cloning and configuring five new web server virtual machines. What would be the benefit of configuring resource shares for the new VMs? ___
A. To prioritize access to a resource during contention.
B. To guarantee access to a resource during contention.
C. To prioritize access to a resource before contention occurs.
D. To guarantee access to a resource before contention occurs.
【单选题】
An administrator logs into the vSphere Web Client and sees the warning shown in the Exhibit. During a change control window, the warning was addressed. What should be done to verify that the host is no longer showing the warning? ___
A. Run a Remediate host operation.
B. Recheck the compliance of the host.
C. Restart the host to get rid of the warning.
D. Install VMware tools to clear the warning.
【单选题】
A vApp named Sales has a Memory Limit of 32 GB and a CPU Limit of 12,000 MHz. There are three virtual machines within the vApp: <Sales-DB -- Has a memory reservation of 20 GB. > <Sales-DC -- Has a memory reservation of 8 GB. > <Sales-Web -- Has a memory reservation of 8 GB.> Which statement is correct? ___
A. All three virtual machines can power on, but will have memory contention.
B. All three virtual machines can power on without memory contention.
C. Only two of the three virtual machines can power on.
D. Only one of the virtual machines can power on.
【单选题】
You are editing the management network configuration of an ESXi 6.x Host from the vSphere Web Client. You mistakenly put the incorrect VLAN in place for the management network. What action do you need to take to correct this? ___
A. You need to manually edit the configuration on the host with command line utilities.
B. No action is required. By default ESXi rolls back configuration changes that disconnect the host.
C. The ESXi host system configuration will need to be restored to the factory configuration to fix the issue.
D. The change can be reverted in the vSphere Web Client by simply editing the switch again.
【单选题】
What is true about resource pools created on a Distributed Resource Scheduler (DRS) cluster?___
A. A root resource pool is created with the specified values.
B. A root resource pool is automatically created using the aggregate total of the ESXi host resources in the cluster.
C. A root resource pool is automatically created using the aggregate total of all resources in the datacenter.
D. A root resource pool is not needed when creating resource pools on a DRS cluster.
【单选题】
An administrator attempts to enable Enhanced vMotion Compatibility (EVC) on a cluster. The operation results in a compatibility error, as shown in the exhibit. What is the likely cause of this error? ___
A. The CPUs in the ESXi host are not AMD CPUs.
B. The CPUs in the ESXi host do not support hardware virtualization capabilities.
C. The XD/NX CPU features have not been enabled in the BIOS of the server.
D. There is no shared storage between the hosts in the cluster.
【单选题】
What condition would prevent an administrator from creating a new VMFS3 datastore on an ESXi 6.x host using the vSphere Web Client? ___
A. A VMFS3 datastore cannot be created on an ESXi 6.x host.
B. The VMFS3 kernel module is not loaded.
C. A VMFS3 datastore cannot be mounted on an ESXi 6.x host.
D. VMFS3 datastores are not compatible with virtual machines created on an
E. SXi 6.x host.
【单选题】
During a new vSphere Distributed Switch configuration, where does the Maximum Transmission Unit (MTU) value get modified? ___
A. Uplink Settings
B. Switch Settings
C. Portgroup Settings
D. NIC Teaming Settings
【单选题】
A small company wants to use VMware products for its production systems. The system administrator needs to recommend a solution that will deliver High Availability to the company's production applications. What is minimum vSphere offering that will support this requirement? ___
A. vSphere Essentials
B. vSphere Essentials Plus
C. vSphere Hypervisor
D. vSphere Standard
【单选题】
Which scenario shows a reason for VMware Tools failing to install? ___
A. Virtual machine has a CD-ROM configured.
B. Guest OS Antivirus is blocking the VMware Tools installation.
C. Guest OS has 64-bit ldd (list dynamic dependencies) utility installed.
D. Virtual machine is powered on.
【单选题】
An administrator is configuring an ESXi 6.x host to use multiple NICs to resolve a management network redundancy error. After configuring a second NIC, the server is not able to communicate when the primary connection is taken down. The administrator analyzes the Exhibit shown here. Based on the exhibit, what is the likely cause of the issue? ___
A. vmnic4 is not attached to a vSwitch.
B. vmnic2 is not connected to a physical switch.
C. E1000 is the incorrect NIC
D. river for this card.
【单选题】
What information is required as part of an interactive ESXi 6.x installation? ___
A. Keyboard layout
B. IP Address
C. Root password
D. DNS information
【单选题】
What is the default load balancing policy for a newly created VMkernel port on a vSphere Distributed Switch? ___
A. Route based on orginating virtual port ID
B. Route based on IP Hash
C. Route based on source mac address
D. Route based on physical NIC load
【单选题】
An administrator deploys vCenter Server using the embedded Platform Services Controller. After testing the deployment for a couple of months, it is determined that the environment would be better served with an external Platform Services Controller. What should the administrator do to meet this new requirement? ___
A. Deploy a fresh instance of vCenter Server with an external Platform Services Controller.
B. Perform a fresh install of an external Platform Services Controller.
C. Migrate the embedded Platform Services Controller to an external Platform Services Controller.
D. Upgrade the embedded Platform Services Controller to an external Platform Services Controller.
【单选题】
Why are some virtual machines orphaned after rebooting a High Availability (HA) enabled host? ___
A. The Orphaned virtual machines have HA restart disabled.
B. The Orphaned virtual machines moved recently and the change did not persist.
C. The host is attached to failed storage.
D. The host just came out of maintenance mode.
【单选题】
Which vSphere 6 Standard Edition feature will allow an organization to ensure that critical multi-threaded applications have the maximum possible uptime? ___
A. Fault Tolerance
B. High Availability
C. Distributed Resource Scheduler
D. App HA
【多选题】
An application running in a virtual machine is experiencing performance issues. When utilizing performance monitoring utilities, it is noted that the CPU Utilization of the application is at 100%. Which two scenarios are probable causes of the CPU contention for the application? (Choose two.)___
A. There is a network I/O constraint.
B. There is a storage I/O constraint.
C. There is insufficient disk space assigned to the virtual machine.
D. The application is not virtualization aware.
【多选题】
A Fault Tolerance (FT) virtual machine with four vCPUs is experiencing high latency when performing ICMP and Application tests. What are three potential causes that may be attributing to this latency? (Choose three.)___
A. The FT network has insufficient bandwidth and is running on a 1GB Link.
B. The FT network is on a particularly high latency link.
C. The FT network has been configured with Network I/O Control.
D. The FT virtual machine is running an e1000 network adapter.
E. The
F. T virtual machine is running on poor performing network-based storage.
【多选题】
A virtual machine is experiencing performance issues. The following performance metrics are observed: <CPU usage value for the virtual machine is above 90%> < CPU ready value for the virtual machine is above 20%> Which two activities will likely resolve the performance issues? (Choose two.)___
A. Set a CPU reservation for the virtual machine.
B. Increase the CPU limit on the virtual machine.
C. Decrease CPU shares equally for all virtual machines on the host.
D. Increase CPU shares equally for all virtual machines on the host.
【多选题】
An administrator is upgrading a vSphere Distributed Switch. The existing switch is version 6.0 and the administrator wants to upgrade to the latest version possible. The environment contains several ESXi 6.1 hosts. Which two options are available to ensure that the upgraded switch will be compatible with these hosts? (Choose two.)___
A. Upgrade the vSphere Distributed Switch to 6.0
B. Upgrade the ESXi 5.5 hosts to version 6.0, then upgrade the vSphere Distributed Switch to 5.5
C. Upgrade the vSphere Distributed Switch to 5.1
D. Upgrade the
E. SXi host switches to 5.5, then upgrade the vSphere Distributed Switch to 5.5
【多选题】
An administrator attempts to create a Thick Provisioned Virtual Disk (VMDK) on an NFS datastore; but it fails. Which two reasons would explain the failure? (Choose two.)___
A. Datastore is on an NFS 3 storage server that does not support Hardware Acceleration
B. Datastore is on an NFS 4.1 storage server
C. Only VMFS datastores support "Thick Provisioned" VMDK
D. The NFS datastore was not created on a "Thick Provisioned" device
【多选题】
Which two NFS Protocol versions does vSphere 6 support? (Choose two.)___
A. Version 3
B. Version 3.1
C. Version 4
D. Version 4.1
【多选题】
Which three operations occur during a cold migration of a virtual machine? (Choose three.)___
A. The virtual machine disks are moved if the datastore is being changed.
B. The virtual machine is registered with the destination server.
C. The source virtual machine is removed from the old hosts.
D. The virtual machine hardware is upgraded.
E. The virtual machine files are quiesced prior to the migration.
【多选题】
A 4 GB Memory virtual machine is experiencing extended memory issues, as shown in the Exhibit. What potential issues could be attributed to this memory pressure?___
A. A limit is imposed on the virtual memory of this virtual machine.
B. The Balloon driver has been uninstalled.
C. A limit has been imposed on the Virtual CPU of the virtual machine.
D. Storage IO control has been enabled for the virtual machine causing the swapped memory.
【多选题】
You are creating a virtual machine in the Web Client using the New Virtual Machine wizard. Which two steps are required? (Choose two.)___
A. Select a valid name.
B. Select a cluster for the compute resource.
C. Select a network adapter.
D. Select the virtual machine compatibility.
【多选题】
An administrator has been given requirements to configure vMotion for a new virtual machine. The configuration should: <Provide Network Redundancy Use VLAN 550> <Be secured against anyone trying to spoof communication The vSwitch1 configuration is shown in the Exhibit.> Which three changes should be made to meet the stated requirements? (Choose three.)___
A. The VLAN ID must be set appropriately.
B. The default values for MAC Address Changes and Forged Transmits must be altered.
C. The teaming and failover adapters must be set appropriately.
D. The Traffic Shaping configuration must be altered.
E. The Load Balancing Policy must be set appropriately.
推荐试题
【单选题】
在水流经过滤池的过程中，对水流均匀性影响最大的是___。
A. 滤层高度；
B. 配水装置；
C. ；进水装置；
D. 滤料的配比。
【单选题】
用EDTA 滴定法测定凝结水硬度时，常出现终点色为灰蓝色的情况，说明___干扰较大，需要加掩蔽剂。
A. 硫酸盐；
B. 铁；
C. 硅；
D. 磷酸盐。
【单选题】
混床的中间配水装置位于___。
A. 混床罐体的中间；
B. 分层后的阳离子交换树脂侧；
C. 分层后的阴离子交换树脂侧；
D. 分层后的阴阳离子交换树脂交界处。
【单选题】
浮动床倒U 型排水管顶端高度与床内树脂层表面高度相比，应该___。
A. 稍高一点；
B. 保持同一水平；
C. 稍低一点；
D. 高出2OOmm 。
【单选题】
滴定完毕后，滴定管下端嘴外有液滴悬挂，则滴定结果___。
A. 偏高；
B. 偏低；
C. 无影响；
D. 低20 ％。
【单选题】
提高再生液温度能增加再生程度，主要是因为加快了 ___的速度。
A. 离子反应；
B. 内扩散和膜扩散；
C. 再生液流动；
D. 反离子的溶解。
【单选题】
按照《 火力发电厂停（备）用热力设备防锈蚀导则》 的规定，锅炉用氨一联氨法保护时，在氨一联氨溶液中，联氨浓度应为 ___ mg /L。
A. 50；
B. 100；
C. 150；
D. 200。
【单选题】
规定反渗透装置的水通量的目的是为了___ , 从而减少清洗次数。
A. 提高水通过流量；
B. 降低污染速度；
C. 膜不生成沉淀物；
D. 适应各种膜。
【单选题】
除盐设备经过大修后，进水试压，应从___。
A. 底部缓慢进水，中排排出，然后关闭所有阀门；
B. 底部缓慢进水，开空气门，至反洗排水排出，然后关闭所有阀门；
C. 正冲洗，然后关闭所有阀门；
D. 中排进水，底部排水
【单选题】
用高锰酸钾测定水中耗氧量时，滴定到终，若溶液的红色在___ min 以内不退，就可以认为已到点。
A. 2 ；
B. 10；
C. l ；
D. 5 。
【单选题】
影响混凝处理效果的因素有水温、pH 值、水中的杂质、接触介质和___。
A. 杂质颗粒大小；
B. 加药量；
C. 水量大小；
D. 杂质颗粒形状。
【单选题】
澄清器正常监测的取样点一般设在___区。
A. 混合；
B. 反应；
C. 过渡；
D. 出水。
【单选题】
凝结水除盐混合床必须采用___的再生方式。
A. 体内再生；
B. 体外再生；
C. 分步再生；
D. 体内分步再生。
【单选题】
循环水加稳定剂处理时，加药方式应___。
A. 必须连续加入；
B. 可以间断加入；
C. 加至要求的药量后可以停比加药；
D. 可以4h 加一次。
【单选题】
混床再生时，为了获得较好的混脂效果，混脂前，应把混床内的水面降至___。
A. 上部窥视孔中间位置；
B. 阴、阳树脂分界而；
C. 树脂层表面上100～150mm；
D. 树脂层表面不见水。
【单选题】
超滤（UF）设备运行时的水反洗是以监督___达到规定要求时进行的。
A. 出口流量；
B. 过膜压差TMP；
C. 产品水电导；
D. 回收率。
【单选题】
25保留三位有效数字应为___。
A. 12.3；
B. 12.2；
C. 12.25；
D. 12.0。
【单选题】
水泵在运行过程中，出现不上水情况，一般应先检查___。
A. 泵是否缺油；
B. 入口流量是否不足；
C. 叶轮是否损坏；
D. 水泵是否反转。
【单选题】
双层床离子交换器是一台交换器内充有两种树脂，一种是弱型离子交换剂，另一种是强型离子交换剂。由于弱型树脂的___低于强型树脂，所以通过反洗，两种树脂可以形成上下两层。
A. 颗粒形状；
B. 颜色差别；
C. 树脂质量；
D. 相对密度。
【单选题】
手工测定锅炉给水溶解氧时必须___。
A. 现场现取现测；
B. 从现场取样后，回到实验室后再测；
C. 现场取样且必须溢流3min 后立即测定；
D. 外地取回的水样也可测。
【单选题】
机组正常运行时，为了防止汽包内有水渣积聚，锅炉排污率应不小于___。
A. 1 % ；
B. 2 % ；
C. 0.5 % ；
D. 0.3 %。
【单选题】
使用滴定管时，刻度准确到0.1mL，读数应读至___。
A. 0.01；
B. 0.1；
C. 0.001；
D. 1.0。
【单选题】
在使用酸度计时，要消除玻璃电极的不对称电位，则应调整___。
A. 零点旋钮；
B. 定位校正旋钮；
C. 温度补偿旋钮；
D. 玻璃电极的高度。
【单选题】
凝结水氢电导率仪指示值偏高，应首先检查___。
A. 电源是否稳定；
B. 仪表样水流量是否正常；
C. 电导电极常数是否正确；
D. 离子交换树脂是否失效。
【单选题】
回收率是反渗透系统设计与运行的重要参数，回收率增加，反渗透的浓水含盐量___。
A. 增大；
B. 减少；
C. 不变化；
D. 不稳定。
【单选题】
阳床入口水氯离子含量增大，则其出口水酸度___。
A. 增大；
B. 减小；
C. 不变；
D. 为零。
【单选题】
为了EDI 有效工作，浓水电导率应控制在___μs/cm。
A. 50～150；
B. 150～600；
C. 600～750；
D. 750～900。
【单选题】
一般生活污水在曝气池___天左右就出现活性污泥絮体。
A. 3 ；
B. 7 ；
C. 15 ；
D. 30。
【单选题】
树脂脱水后，应___处理。
A. 用除盐水浸泡；
B. 用除盐水冲洗；
C. 用饱和食盐水浸泡；
D. 用10％食盐水浸泡。
【单选题】
锅炉连续排污取样水管一般安装在汽包正常水位下___。
A. 100～200mm 处；
B. 200～300mm 处；
C. 3O0mm 以下；
D. 50～1O0mm 处。
【单选题】
关于逆流式固定床离子交换树脂，下列说法中不正确的是___。
A. 先低流速，后逐渐增大流速，最大小超过15m/h；
B. 大修完后，应先进行反洗后再再生；
C. 每个工作周期结束后，都应进行大反洗；
D. 反洗效果取决于反洗水分布均匀性和树脂膨胀率。
【单选题】
HSn70—1A 为凝结器铜管的牌号，其中—l 是指添加___的含量。
A. Al；
B. Sn；
C. As；
D. Zn。
【单选题】
冷却水防垢处理通常采用___。
A. 除盐处理；
B. 水质稳定处理；
C. 除浊处理；
D. 化学清洗。
【单选题】
溶液的pH 值是溶液___的量度。
A. 酸度；
B. 碱度；
C. 盐度；
D. 酸碱度。
【单选题】
盐酸不能用来清洗___材料制成的设备。
A. 低合金钢；
B. 碳钢；
C. 奥氏体钢；
D. 黄铜。
【单选题】
化学清洗导则规定：用来评价化学清洗质量的腐蚀指示片应无点蚀且平均腐蚀速率应小于___g/(m2.h)。
【单选题】
阳离子交换树脂用食盐水再生，水经过这样的交换树脂软化处理后，水的碱度___。
A. 增大；
B. 不变；
C. 减小；
D. 等于零。
【单选题】
运行炉过热器的“水汽腐蚀”主要原因是___。
A. 腐蚀部位局部超温；
B. 停用保护不当；
C. 蒸汽的品种差；
D. 过热器较为污脏。
【单选题】
对于凝汽器来说，循环水的运行流速不应低于___m/s。
A. 1；
B. 0.8；
C. 1.5；
D. 2.0。
【单选题】
凝汽器运行时的胶球清洗收球率不应低于___。
A. 80% ；
B. 90%；
C. 95%；
D. 98%。
