【单选题】
Which statement is true regarding the use of VMFS3 datastores with vSphere 6.5?___
A. VMFS3 datastores can be used but not created.
B. VMFS3 datastores can be neither used nor created.
C. VMFS3 datastores will be present but unmounted.
D. VMFS3 datastores can be created and used.
查看试卷,进入试卷练习
微信扫一扫,开始刷题
相关试题
【单选题】
In the Exhibit, each VM has a 1GHz non-expandable reservation. If all VMs are powered on in sequence, what would be the outcome?___
A. VM4 cannot be powered on.
B. VM5 cannot be powered on.
C. VM6 cannot be powered on.
D. VM3 cannot be powered on.
【单选题】
vSphere 6.5 introduced MAClearning capabilities for VMware’s virtual switches. What three benefits will it provide? (Choose three.)___
A. Reduced memory consumption.
B. Reduced consumption of extra CPU cycles.
C. Increased network throughput.
D. Prevent packet flooding inside the vSwitch.
【单选题】
What is the default pathing policy for most active-active arrays?___
A. Fixed
B. Most Recently Used
C. Dynamic
D. isk Morroring
【单选题】
Which command will show the iSCSI sessions on a ESXi 6.5 host?___
A. esxcli storage iscsi session get
B. esxcli iscsi session get
C. esxcli storage iscsi session
D. esxcli iscsi session list
【单选题】
Which of the following is not a parameter for traffic filtering or marking?___
A. virtual port ID
B. Protocol
C. Traffic Direction
D. DSCP value
E. Traffic redirection
【单选题】
A vSphere administrator wants to enable a virtual machine with Secure Boot, but in VM setting, Secure Boot option was not found under Boot Options. What could be the cause?___
A. The virtual hardware is not compatible.
B. The virtual machine has missing drivers.
C. The virtual machine OS does not support secure boot.
D. VMware Tools is not upgraded.
【单选题】
A virtual machine is connected on a distributed port group where the average bandwidth configured in the traffic shaping policy is 100 Mbps. The VM network adapter is configured with a reservation of 200 Mbps. What is the VM’s effective bandwidth?___
A. 200 Mbps
B. 100 Mbps
C. 150 Mbps
D. 400 Mbps
【多选题】
What are two reasons why a datastore in a Storage DRS cluster cannot enter maintenance mode?(Choose two.)___
A. Storage latency is too high to allow Storage DRS initiate Storage vMotion.
B. Storage DRS is configured for a VMFS3 datastore.
C. Storage
D. RS is disabled on the virtual disk.
【多选题】
What two methods are used to configure VMware vSphere Storage I/O Control shares and limits? (Choose two.)___
A. Assign shares and limits to VM virtual disks.
B. Assign shares and limits to datastores.
C. Assign shares and limits to Storage (DRS) clusters.
D. Assign shares and limits using VM storage policies.
【多选题】
ESXi 6.5 introduces VMFS6, which supports both 512e and 512n devices. What three configurations are supported when using these devices? (Choose three.) ___
A. Hosts with both 512e and 512n devices.
B. Storage vMotion between both 512e and 512n devices.
C. Datastore Extents spanned between both 512e and 512n devices.
D. Storage DRS clusters containing only both 512e and 512n devices.
【多选题】
A vSphere Administrator observes that the Primary VM configured with Fault Tolerance is executing slowly. After further investigation, it is determined that the Secondary VM is on an overcommitted ESXi host. What two methods will correct the problem? (Choose two.)___
A. Use Storage vMotion to migrate the Secondary VM to another datastore.
B. Use vMotion to migrate the Secondary VM to a different ESXi host.
C. Configure a CPU limit on the Primary VM which will also apply to the Secondary VM.
D. Turn off and turn on FT in order to recreate the Secondary VM on a different datastore.
【多选题】
Which two features require the use of Host Profiles? (Choose two.)___
A. Host Customizations
B. shared storage
C. Auto
D. eploy
【多选题】
What three processes on the vCenter Server Appliance (VCSA) does“vmware-watchdog monitor? (Choose three.) ___
A. vmware-eam
B. vmcad
C. vmware-vpostgres
D. vpxd
E. vsan-health
【多选题】
What three processes on the vCenter Server Appliance (VCSA) does“vmware-watchdog monitor? (Choose three.) ___
A. vmware-eam
B. vmcad
C. vmware-vpostgres
D. vpxd
E. vsan-health
【多选题】
Which two statements correctly describe VM-Host affinity rules? (Choose two.) ___
A. When there is more than one VM-Host affinity rule in a vSphere DRS cluster, the rules are applied equally.
B. After creating a VM-Host affinity rule, its ability to function in relation to other rules is predetermined.
C. When there is more than one VM-Host affinity rule in a vSphere
D. RS cluster, the rules will be ranked.
【多选题】
An administrator wants to enable proactive HA by moving virtual machines automatically if a hardware alert is triggered. What are the three required settings? (Choose three.)___
A. Set vSphere DRS Automation to Partially Automated.
B. Turn on Proactive HA.
C. Set the Proactive HA Automation Level to Manual.
D. Set the Proactive HA Automation Level to Automated.
E. Turn on vSphere HA and vSphere DRS.
【多选题】
If vCenter Server 5.5 installation has one or more services deployed remotely, which three services are relocated to vCenter Server 6.5 on upgrade? (Choose three.)___
A. vCenter Inventory Services
B. vSphere Authentication Proxy
C. vSphere Web Client
D. vSphere
E. SXi Dump Collector
【多选题】
What two debugging levels can a virtual machine be configured to? (Choose two.)___
A. Verbose
B. Debugging
C. Statistics
D. Trivia
【多选题】
What are three benefits of using a few large-capacity LUNs instead of many small-capacity LUNs? (Choose three.) ___
A. Better performance because there is less contention for a single volume.
B. More flexibility for resizing virtual disks.
C. Less wasted storage space.
D. More flexibility to create virtual machines without adding new LUNs.
E. Fewer VMFS datastores to manage.
【多选题】
Which two configurable options are available in Boot Options for a virtual machine? (Choose two.)___
A. Tools Upgrades
B. Encryption
C. Firmware
D. Force BIOS setup
【多选题】
Which three VMware-recommended best practices should an administrator follow before upgrading to vSphere 6.5? (Choose three.)___
A. Disconnect ESXi host from vCenter.
B. VMware Tools are installed in the virtual machine.
C. Ensure that the system hardware complies with ESXi requirements.
D. Back up the host.
E. Check the interoperability of any other software integrated with vSphere.
【多选题】
What are two requirements to enable EVC in vSphere DRS cluster? (Choose two.)___
A. CPUs must be from the same vendor.
B. EVC must use the lowest possible baseline supported by the hardware.
C. CPUs must be in the same family and of the same speed.
D. No VMs may be running in the cluster.
【多选题】
What three conditions could result in VMware Flash Read Cache being unable to claim a disk? (Choose three.)___
A. The disk is not listed in the VMware hardware compatibility guide.
B. The disk is not detected as an SSD.
C. The disk is not detected as local.
D. The disk is in use by VMFs.
【多选题】
Boot from SAN is supported on which three storage technologies? (Choose three.)___
A. VMware vSAN
B. FCoE
C. NFS 4.1
D. iSCSI
E. FC
【多选题】
Which two components are part of storage I/O multipathing on ESXi? (Choose two.)___
A. SATP
B. VASA
C. PSP
D. VAAI
【多选题】
Which two statements are true about Highly Available vSphere Auto Deploy infrastructure? (Choose two.)___
A. It helps prevent data loss.
B. It is a prerequisite for using vSphere Auto Deploy with stateful install.
C. It requires two or more Auto
D. eploy servers.
【多选题】
The virtual machine log rotation size can be changed for all VMs by which two interfaces? (Choose two.)___
A. PowerCLI
B. vSphere Web Client
C. ESXi host client
D. esxcli
【多选题】
Which two configuration options can exclude virtual disks from snapshot operations? (Choose two.)___
A. Use RDM in virtual mode for virtual disk.
B. Use virtual disks in Independent – Persistent mode.
C. Use a virtual disk larger than 2 TB in size.
D. Use RDM in physical mode for virtual disk.
【多选题】
Which two storage configurations on the source server are unsupported with VMware Converter? (Choose two.)___
A. Linux LVM
B. software RAID
C. GPT/MBR hybrid disks
D. Windows basic volumes
E. Windows dynamic volumes
【多选题】
Which two statements about vCenter HA are correct? (Choose two.)___
A. ESXi 5.5 or later is required.
B. vCenter HA network latency between nodes must be less than 50 ms.
C. NFS datastore is supported.
D. It must be deployed on a 3
E. SXi host cluster with DRS enabled.
【多选题】
An attempt to delete NFS datastore from a ESXi host returns the error: Sysinfo error on operation returned the following status:< Busy> Which two statements could explain this failure? (Choose two.)___
A. NFS datastore is a part of Storage DRS Cluster.
B. NFS.VolumeRemountFrequency value is set to 30.
C. Storage I/O Control is enabled on NFS datastore.
D. NFS datastore has running or registered virtual machines.
【多选题】
An administrator finds that the Microsoft Exchange virtual machines are exhibiting network latency. What two in-guest changes can help decrease latency? (Choose two.)___
A. LRO
B. TSO
C. SR-IOV
D. PVRDMA
【多选题】
Which two types of iSCSI adapters require VMkernel networking configuration? (Choose two.)___
A. dependent hardware
B. in-guest
C. software
D. independent hardware
【多选题】
Which two statements are true for NFS v4.1 firewall behavior? (Choose two.)___
A. It closes port 2049.
B. It sets allowed. All flag to TRUE.
C. It sets allowed. All flag to FALSE.
D. It opens port 2049.
【多选题】
A vSphere Administrator attempts to enable Fault Tolerance for a virtual machine but receives the following error: Secondary VM could not be powered on as there are no compatible hosts that can accommodate it. What two options could cause this error? (Choose two.)___
A. The other ESXi host(s) are in Maintenance Mode.
B. Hardware virtualization is not enabled on the other ESXi host(s).
C. The other ESXi host(s) are in Quarantine Mode.
D. Hardware MMU is enabled on the other
E. SXi host(s).
【多选题】
Storage capabilities be populated in what two ways? (Choose two.)___
A. The administrator can use tags to describe capabilities.
B. Default capabilities are provided by vCenter Server.
C. Datastores can advertise their capabilities through VAAI.
D. Datastores can advertise their capabilities through VASA.
【多选题】
In network troubleshooting it is important to know what upstream switch the ESXi host is connected to. Which two features does ESXi provide to help identify the upstream switch? (Choose two.)___
A. Promiscuous mode
B. DPM
C. LLDP
D. CDP
【多选题】
Virtual Volumes supports which three VMware features? (Choose three.)___
A. Instant Clones
B. Distributed Resource Scheduler
C. Linked Clones
D. vMotion
E. Storage Distributed Resource Scheduler
【多选题】
vSphere DRS helps to balance virtual machines with available resources in a vSphere cluster. What three types of resources can be taken into account for balancing? (Choose three.)___
A. CPU
B. physical NIC saturation of an ESXi host
C. virtual NIC saturation of a virtual machine
D. RAM
E. storage latency
【多选题】
Which three design requirements must be satisfied to enable RAID-6 objects in a VMware vSAN cluster? (Choose three.)___
A. vSAN Advanced license or higher
B. vSAN stretched cluster
C. at least six hosts contributing storage
D. deduplication and compression
E. all flash configuration
推荐试题
【单选题】
18在单相桥式整流电容滤波电路中,设U2为其输入电压,输出电压的平均值约为___。
A. U0=0.45U2
B. U0=1.2U2
C. U0=0.9U2
D. U0=1.4U2
【单选题】
19在单相桥式整流电路中,设U2为其输入电压,输出电压的平均值约为___。
A. U0=0.45U2
B. U0=1.2U2
C. U0=0.9U2
D. U0=1.4U2
【单选题】
20在半波整流电容滤波电路中,设U2为其输入电压,输出电压的平均值约为___。
A. U0=0.45U2
B. U0=1.2U2
C. U0=0.9U2
D. U0=1.4U2
【单选题】
21在半波整流电路中,设U2为其输入电压,输出电压的平均值约为___。
A. U0=0.45U2
B. U0=1.2U2
C. U0=0.9U2
D. U0=1.4U2
【单选题】
22温度影响了放大电路中的___,从而使静态工作点不稳定。
A. 电阻;
B. 电容;
C. 三极管;
D. 电源。
【单选题】
23用直流电压表测得放大电路中某三极管各极电位分别是2V、6V、2.7V,则三个电极分别是___。
A. [B、C、E]
B. [C、B、E]
C. [E、C、B]
【单选题】
24共射极放大电路的交流输出波形上半周失真时为___
【单选题】
25三极管的反向电流ICBO是由___组成的。
A. 多数载流子
B. 少数载流子
C. 多数载流子和少数载流子
【单选题】
27如果在NPN型三极管放大电路中测得发射结为正向偏置,集电结也为正向偏置,则此管的工作状态为___
A. 放大状态;
B. 截止状态;
C. 饱和状态;
D. 不能确定。
【单选题】
28在以下三种电路中输入电阻最大的电路是___。
A. 共基放大电路
B. 共集放大电路
C. 共射放大电路
【单选题】
29在以下三种电路中既能放大电流,又能放大电压的电路是___。
A. 共基放大电路
B. 共集放大电路
C. 共射放大电路
【单选题】
30在以下三种电路中输出电阻最小的电路是___;
A. 共基放大电路
B. 共集放大电路
C. 共射放大电路
【单选题】
当PNP型晶体管工作在放大区时,各极电位关系为uC ___uB。
【单选题】
32当PNP型晶体管工作在放大区时,各极电位关系为uB___uE 。
【单选题】
33测得NPN型三极管上各电极对地电位分别为,,,说明此三极管处在___。
A. 放大区
B. 饱和区
C. 截止区
D. 反向击穿区
【单选题】
34若使三极管具有电流放大能力,必须满足的外部条件是___。
A. 发射结正偏、集电结正偏
B. 发射结反偏、集电结反偏
C. 发射结正偏、集电结反偏
D. 发射结反偏、集电结正偏
【单选题】
35在由PNP晶体管组成的基本共射放大电路中,当输入信号为1KHz、5mV的正弦电压时,输出电压波形出现了顶部削平的失真。这种失真是___ 。
A. 饱和失真
B. 截止失真
C. 交越失真
D. 频率失真
【单选题】
36在由PNP晶体管组成的基本共射放大电路中,当输入信号为1KHz、5mV的正弦电压时,输出电压波形出现了底部削平的失真。这种失真是___ 。
A. 饱和失真
B. 截止失真
C. 交越失真
D. 频率失真
【单选题】
37共集电极放大电路中Re的负反馈组态是___。
A. 电压串联负反馈
B. 电流串联负反馈
C. 电压并联负反馈
【单选题】
38为了使放大器带负载能力强,一般引入___负反馈。
【单选题】
41为了提高三极管放大电路的输入电阻,采用___负反馈 i=i1+i2
【单选题】
42为了稳定输出电流,采用___负反馈。
【单选题】
43为了改善放大器的动态性能,应该引入___电路。
A. 直流负反馈
B. 交流负反馈
C. 电压负反馈
D. 电流负反馈
【单选题】
44为了稳定放大器的静态工作点,应该引入___电路。
A. 直流负反馈
B. 交流负反馈
C. 电压负反馈
D. 电流负反馈
【单选题】
45共模抑制比是差分放大电路的一个主要技术指标,它反映放大电路___能力。
A. 放大差模抑制共模
B. 输入电阻高
C. 输出电阻低
【单选题】
46差分放大电路是为了___而设置的。
A. 稳定Au
B. 放大信号
C. 抑制零点漂移
【单选题】
47分析运放的“虚短”是指是___。
A. U-≈U+
B. I-≈I+≈0
C. U0=Ui
D. U-≈U+≈0
【单选题】
48分析运放的“虚断”是指是___。
A. U-≈U+
B. I-≈I+≈0
C. I-≈I+
D. U-≈U+≈0
【单选题】
51两级放大电路,Au1=-40,Au2=-50,若输入电压U1=5mv,则输出电压Uo为 ___
A. -200mv;
B. -250mV;
C. 10V;
D. 100V
【单选题】
52通用型集成运放的输入级多采用___。
A. 共基接法
B. 共集接法
C. 共射接法
D. 差分接法
【单选题】
53理想运放的两个重要性质是___。
A. 虚短与虚地
B. 虚断与虚短
C. 断路与短路
【单选题】
54振荡器的输出信号最初由___而来的。
A. 基本放大器
B. 选频网络
C. 干扰或噪声信号
【单选题】
55产生正弦波自激震荡的稳定条件是___。
A. 引入正反馈
B. |AF|≥1
C. AF=1
【单选题】
56从结构上来看,正弦振荡电路是一个 ___ 。
A. 有输入信号的负反馈放大器;
B. 没有输入信号的带选频网络的正反馈放大器;
C. 没有输入信号的不带选频网络的正反馈放大器。
【单选题】
57对频率稳定度要求较高的振荡器,要采用: ___ 。
A. LC振荡电路;
B. RC振荡电路;
C. RL振荡电路;
D. 石英晶体振荡电路。
【单选题】
58在甲类、乙类、甲乙类放大电路中,其导通角分别为___
A. 小于180 O、180 O、360O
B. 360O、180 O、小于180 O。
C. 180 O、小于180 O、360O
【单选题】
W78XX系和列W79XX系列引脚对应关系为 ___ 。
A. 一致;
B. 1脚与3脚对调,2脚不变;
C. 1、2对调。
【单选题】
60两个β相同的晶体管组成复合管后,其电流放大系数约为 ___ 。
【单选题】
1三极管的开关特性是___。
A. 截止相当于开关接通
B. 放大相当于开关接通
C. 饱和相当于开关接通
D. 截止相当于开关断开,饱和相当于开关接通
【单选题】
2数字集成门电路,目前生产最多应用最普遍的门电路是___