【单选题】
In the Exhibit, each VM has a 1GHz non-expandable reservation. If all VMs are powered on in sequence, what would be the outcome?___
A. VM4 cannot be powered on.
B. VM5 cannot be powered on.
C. VM6 cannot be powered on.
D. VM3 cannot be powered on.
查看试卷，进入试卷练习
微信扫一扫，开始刷题
相关试题
【单选题】
vSphere 6.5 introduced MAClearning capabilities for VMware’s virtual switches. What three benefits will it provide? (Choose three.)___
A. Reduced memory consumption.
B. Reduced consumption of extra CPU cycles.
C. Increased network throughput.
D. Prevent packet flooding inside the vSwitch.
【单选题】
What is the default pathing policy for most active-active arrays?___
A. Fixed
B. Most Recently Used
C. Dynamic
D. isk Morroring
【单选题】
Which command will show the iSCSI sessions on a ESXi 6.5 host?___
A. esxcli storage iscsi session get
B. esxcli iscsi session get
C. esxcli storage iscsi session
D. esxcli iscsi session list
【单选题】
Which of the following is not a parameter for traffic filtering or marking?___
A. virtual port ID
B. Protocol
C. Traffic Direction
D. DSCP value
E. Traffic redirection
【单选题】
A vSphere administrator wants to enable a virtual machine with Secure Boot, but in VM setting, Secure Boot option was not found under Boot Options. What could be the cause?___
A. The virtual hardware is not compatible.
B. The virtual machine has missing drivers.
C. The virtual machine OS does not support secure boot.
D. VMware Tools is not upgraded.
【单选题】
A virtual machine is connected on a distributed port group where the average bandwidth configured in the traffic shaping policy is 100 Mbps. The VM network adapter is configured with a reservation of 200 Mbps. What is the VM’s effective bandwidth?___
A. 200 Mbps
B. 100 Mbps
C. 150 Mbps
D. 400 Mbps
【多选题】
What are two reasons why a datastore in a Storage DRS cluster cannot enter maintenance mode?(Choose two.)___
A. Storage latency is too high to allow Storage DRS initiate Storage vMotion.
B. Storage DRS is configured for a VMFS3 datastore.
C. Storage
D. RS is disabled on the virtual disk.
【多选题】
What two methods are used to configure VMware vSphere Storage I/O Control shares and limits? (Choose two.)___
A. Assign shares and limits to VM virtual disks.
B. Assign shares and limits to datastores.
C. Assign shares and limits to Storage (DRS) clusters.
D. Assign shares and limits using VM storage policies.
【多选题】
ESXi 6.5 introduces VMFS6, which supports both 512e and 512n devices. What three configurations are supported when using these devices? (Choose three.) ___
A. Hosts with both 512e and 512n devices.
B. Storage vMotion between both 512e and 512n devices.
C. Datastore Extents spanned between both 512e and 512n devices.
D. Storage DRS clusters containing only both 512e and 512n devices.
【多选题】
A vSphere Administrator observes that the Primary VM configured with Fault Tolerance is executing slowly. After further investigation, it is determined that the Secondary VM is on an overcommitted ESXi host. What two methods will correct the problem? (Choose two.)___
A. Use Storage vMotion to migrate the Secondary VM to another datastore.
B. Use vMotion to migrate the Secondary VM to a different ESXi host.
C. Configure a CPU limit on the Primary VM which will also apply to the Secondary VM.
D. Turn off and turn on FT in order to recreate the Secondary VM on a different datastore.
【多选题】
Which two features require the use of Host Profiles? (Choose two.)___
A. Host Customizations
B. shared storage
C. Auto
D. eploy
【多选题】
What three processes on the vCenter Server Appliance (VCSA) does“vmware-watchdog monitor? (Choose three.) ___
A. vmware-eam
B. vmcad
C. vmware-vpostgres
D. vpxd
E. vsan-health
【多选题】
What three processes on the vCenter Server Appliance (VCSA) does“vmware-watchdog monitor? (Choose three.) ___
A. vmware-eam
B. vmcad
C. vmware-vpostgres
D. vpxd
E. vsan-health
【多选题】
Which two statements correctly describe VM-Host affinity rules? (Choose two.) ___
A. When there is more than one VM-Host affinity rule in a vSphere DRS cluster, the rules are applied equally.
B. After creating a VM-Host affinity rule, its ability to function in relation to other rules is predetermined.
C. When there is more than one VM-Host affinity rule in a vSphere
D. RS cluster, the rules will be ranked.
【多选题】
An administrator wants to enable proactive HA by moving virtual machines automatically if a hardware alert is triggered. What are the three required settings? (Choose three.)___
A. Set vSphere DRS Automation to Partially Automated.
B. Turn on Proactive HA.
C. Set the Proactive HA Automation Level to Manual.
D. Set the Proactive HA Automation Level to Automated.
E. Turn on vSphere HA and vSphere DRS.
【多选题】
If vCenter Server 5.5 installation has one or more services deployed remotely, which three services are relocated to vCenter Server 6.5 on upgrade? (Choose three.)___
A. vCenter Inventory Services
B. vSphere Authentication Proxy
C. vSphere Web Client
D. vSphere
E. SXi Dump Collector
【多选题】
What two debugging levels can a virtual machine be configured to? (Choose two.)___
A. Verbose
B. Debugging
C. Statistics
D. Trivia
【多选题】
What are three benefits of using a few large-capacity LUNs instead of many small-capacity LUNs? (Choose three.) ___
A. Better performance because there is less contention for a single volume.
B. More flexibility for resizing virtual disks.
C. Less wasted storage space.
D. More flexibility to create virtual machines without adding new LUNs.
E. Fewer VMFS datastores to manage.
【多选题】
Which two configurable options are available in Boot Options for a virtual machine? (Choose two.)___
A. Tools Upgrades
B. Encryption
C. Firmware
D. Force BIOS setup
【多选题】
Which three VMware-recommended best practices should an administrator follow before upgrading to vSphere 6.5? (Choose three.)___
A. Disconnect ESXi host from vCenter.
B. VMware Tools are installed in the virtual machine.
C. Ensure that the system hardware complies with ESXi requirements.
D. Back up the host.
E. Check the interoperability of any other software integrated with vSphere.
【多选题】
What are two requirements to enable EVC in vSphere DRS cluster? (Choose two.)___
A. CPUs must be from the same vendor.
B. EVC must use the lowest possible baseline supported by the hardware.
C. CPUs must be in the same family and of the same speed.
D. No VMs may be running in the cluster.
【多选题】
What three conditions could result in VMware Flash Read Cache being unable to claim a disk? (Choose three.)___
A. The disk is not listed in the VMware hardware compatibility guide.
B. The disk is not detected as an SSD.
C. The disk is not detected as local.
D. The disk is in use by VMFs.
【多选题】
Boot from SAN is supported on which three storage technologies? (Choose three.)___
A. VMware vSAN
B. FCoE
C. NFS 4.1
D. iSCSI
E. FC
【多选题】
Which two components are part of storage I/O multipathing on ESXi? (Choose two.)___
A. SATP
B. VASA
C. PSP
D. VAAI
【多选题】
Which two statements are true about Highly Available vSphere Auto Deploy infrastructure? (Choose two.)___
A. It helps prevent data loss.
B. It is a prerequisite for using vSphere Auto Deploy with stateful install.
C. It requires two or more Auto
D. eploy servers.
【多选题】
The virtual machine log rotation size can be changed for all VMs by which two interfaces? (Choose two.)___
A. PowerCLI
B. vSphere Web Client
C. ESXi host client
D. esxcli
【多选题】
Which two configuration options can exclude virtual disks from snapshot operations? (Choose two.)___
A. Use RDM in virtual mode for virtual disk.
B. Use virtual disks in Independent – Persistent mode.
C. Use a virtual disk larger than 2 TB in size.
D. Use RDM in physical mode for virtual disk.
【多选题】
Which two storage configurations on the source server are unsupported with VMware Converter? (Choose two.)___
A. Linux LVM
B. software RAID
C. GPT/MBR hybrid disks
D. Windows basic volumes
E. Windows dynamic volumes
【多选题】
Which two statements about vCenter HA are correct? (Choose two.)___
A. ESXi 5.5 or later is required.
B. vCenter HA network latency between nodes must be less than 50 ms.
C. NFS datastore is supported.
D. It must be deployed on a 3
E. SXi host cluster with DRS enabled.
【多选题】
An attempt to delete NFS datastore from a ESXi host returns the error: Sysinfo error on operation returned the following status:< Busy> Which two statements could explain this failure? (Choose two.)___
A. NFS datastore is a part of Storage DRS Cluster.
B. NFS.VolumeRemountFrequency value is set to 30.
C. Storage I/O Control is enabled on NFS datastore.
D. NFS datastore has running or registered virtual machines.
【多选题】
An administrator finds that the Microsoft Exchange virtual machines are exhibiting network latency. What two in-guest changes can help decrease latency? (Choose two.)___
A. LRO
B. TSO
C. SR-IOV
D. PVRDMA
【多选题】
Which two types of iSCSI adapters require VMkernel networking configuration? (Choose two.)___
A. dependent hardware
B. in-guest
C. software
D. independent hardware
【多选题】
Which two statements are true for NFS v4.1 firewall behavior? (Choose two.)___
A. It closes port 2049.
B. It sets allowed. All flag to TRUE.
C. It sets allowed. All flag to FALSE.
D. It opens port 2049.
【多选题】
A vSphere Administrator attempts to enable Fault Tolerance for a virtual machine but receives the following error: Secondary VM could not be powered on as there are no compatible hosts that can accommodate it. What two options could cause this error? (Choose two.)___
A. The other ESXi host(s) are in Maintenance Mode.
B. Hardware virtualization is not enabled on the other ESXi host(s).
C. The other ESXi host(s) are in Quarantine Mode.
D. Hardware MMU is enabled on the other
E. SXi host(s).
【多选题】
Storage capabilities be populated in what two ways? (Choose two.)___
A. The administrator can use tags to describe capabilities.
B. Default capabilities are provided by vCenter Server.
C. Datastores can advertise their capabilities through VAAI.
D. Datastores can advertise their capabilities through VASA.
【多选题】
In network troubleshooting it is important to know what upstream switch the ESXi host is connected to. Which two features does ESXi provide to help identify the upstream switch? (Choose two.)___
A. Promiscuous mode
B. DPM
C. LLDP
D. CDP
【多选题】
Virtual Volumes supports which three VMware features? (Choose three.)___
A. Instant Clones
B. Distributed Resource Scheduler
C. Linked Clones
D. vMotion
E. Storage Distributed Resource Scheduler
【多选题】
vSphere DRS helps to balance virtual machines with available resources in a vSphere cluster. What three types of resources can be taken into account for balancing? (Choose three.)___
A. CPU
B. physical NIC saturation of an ESXi host
C. virtual NIC saturation of a virtual machine
D. RAM
E. storage latency
【多选题】
Which three design requirements must be satisfied to enable RAID-6 objects in a VMware vSAN cluster? (Choose three.)___
A. vSAN Advanced license or higher
B. vSAN stretched cluster
C. at least six hosts contributing storage
D. deduplication and compression
E. all flash configuration
【多选题】
When using "Cluster resource percentage" for host failover capacity in vSphere HA Admission Control, the total resource requirements are calculated from which two values? (Choose two.)___
A. Total vCPUs assigned to each VM.
B. Average CPU usage on each VM over time.
C. Memory reservations on each VM.
D. Total memory assigned to each VM.
E. Average active memory on each VM over time.
F. CPU reservations on each VM.
推荐试题
【单选题】
汇流排定位绝缘子安装端正，表面光滑、清洁，无裂纹、破损、缺釉、斑点等缺陷，瓷釉剥落总面积不大于___mm2。
A. 150
B. 250、
C. 300
D. 500
【单选题】
汇流排终端到相邻悬挂点的距离为___mm，允许误差：+200mm，-100mm。
A. 1500
B. 1600、
C. 1800
D. 2500
【单选题】
接触线在锚段末端汇流排外余长为100～150mm，沿汇流排终端方向顺延，水平夹角一般不小于为___°；接触线端头对接地体的距离不小于150mm；困难情况不小于115mm。
【单选题】
中心锚结处于汇流排中心线的正上方，基座中心偏离汇流排中心不大于___mm。
【单选题】
中心锚结绝缘子表面应无损伤，接地端至带电体、汇流排距离一般情况下应不小于150mm；困难情况不应小于___mm。中心锚结线夹处接触线的工作面应平顺无负弛度。
A. 60
B. 100、
C. 115
D. 120
【单选题】
中心锚结绝缘子及拉杆受力均衡，与汇流排的夹角一般不大于___°；中心锚结线夹与汇流排固定牢靠，调整螺栓处于可调状态。
【单选题】
悬挂点处接触线拉出值范围为±___mm，误差不应大于±10mm。关键悬挂点的拉出值与设计值一致，其它一般悬挂点的拉出值仅作调整参考，但必须保证汇流排平滑过渡，且拉出值的绝对值不得大于300mm。
A. 200
B. 250、
C. 300
D. 350
【单选题】
汇流排横截面中轴线应垂直于所在处的轨道平面，偏斜不应大于___°。
【单选题】
锚段关节两支接触线在关节中间悬挂点处应等高，其高差不大于___mm；转换悬挂点非工作支比工作支高出3～6mm，受电弓在双向通过时应平滑过渡，无撞击和拉弧现象。
【单选题】
分段绝缘器中心偏离线路中心线不应大于___mm。
【单选题】
分段绝缘器紧固件连接牢固可靠，滑板连接螺栓紧固力矩为___N•m。
【单选题】
分段绝缘器中心距相邻悬挂定位点的距离为___mm，允许误差±500mm。
A. 500
B. 800
C. 1000
D. 1500
【单选题】
测量机构箱内电磁离合器电阻，其阻值为___Ω，误差为±5Ω。
【单选题】
隔离开关触头带电部分至顶部建筑物距离，不应小于___mm；至隧道壁不应小于150mm。
A. 250
B. 300
C. 500
D. 1000
【单选题】
隔离开关底座和操作机构底座应呈水平状态，安装牢固；靠近线路侧至线路中心线不得小于___mm。操作机构底座安装高度距地面1000~1200mm为宜。操作机构箱应密封良好，门锁和钥匙完好齐全。
A. 1500
B. 1800
C. 1900
D. 2000
【单选题】
电连接线的安装位置允许偏差为±200mm，距相邻绝缘子最小距离不小于___mm,在任何情况下均应满足带电距离要求。
A. 50
B. 60
C. 100
D. 150
【单选题】
150mm2电缆绝缘层剥开长度为___mm；400mm2电缆绝缘层剥开长度为90mm；电缆导体不得损伤。
A. 50
B. 60、
C. 70
D. 100
【单选题】
150mm2电缆卡子间距不大于___mm；400mm2电缆卡子间距不大于1000mm。
A. 50 0
B. 600、
C. 700
D. 800
【单选题】
电连接电缆弯曲半径150mm2不小于___mm， 400mm2不小于800mm。
A. 250 0
B. 300、
C. 500
D. 800
【单选题】
电连接线的安装位置允许偏差为±___mm，距相邻绝缘子最小距离不小于60mm,在任何情况下均应满足带电距离要求。
A. 100 0
B. 200、
C. 250
D. 300
【单选题】
架空地线的弛度应符合安装曲线，其允许偏差为+5%至-___%。
【单选题】
架空地线不得有___股以上的断股，同一锚段内，断股补强数和接头数均不超过4个。
【单选题】
架空地线下锚处调整螺栓长度处于可调节范围内，并有不少于___mm的调节余量。
【单选题】
接地线及其固定螺栓、电缆卡子等对接触网带电体的距离不小于150mm，对受电弓的瞬时距离不小于___mm，且不得侵入行车限界。
A. 50
B. 100、
C. 150
D. 250
【单选题】
运行中的避雷器___预防性试验。
A. 每年一次
B. 每年在雷雨季节前需做一次、
C. 每两年一次
D. 视情况做
【单选题】
放电间隙___mm，放电铜棒应无严重烧伤变形。
A. 2-3
B. 2.5-3、
C. 2.5-3.5
D. 3-6
【单选题】
简单悬挂的吊索回头不小于___mm，吊索压板紧固良好。
【单选题】
柔性接触网定位器及定位管坡度为___。
A. 1/10-1/6
B. 1/10-1/5
C. 1/6-1/5
D. 1/10-1/7
【单选题】
2号线共有___处接触网刚柔过渡装置。
【单选题】
2号线共有___座牵引变电所（含车辆段停车场）。
【单选题】
蛇口西车辆段运用库线路为___mm；洗车线为5400mm；定修线为5700mm；蛇口西车辆段其它线路一般为4800mm。
A. 5000
B. 5200
C. 5400
D. 5500
【单选题】
后海停车场接触网导高：一般为___mm。
A. 5000
B. 5200
C. 5400
D. 5500
【单选题】
接触网额定电压DC1500V，允许波动范围1000～1800V；接触网额定电流___A。
A. 2000
B. 2500
C. 3000
D. 5000
【单选题】
在某一变电所故障退出运行时采用___的供电的方式
A. 单边供电
B. 正常双边供电
C. 跨越故障变电所单边供电
D. 大双边供电
【单选题】
每次开工前，施工负责人要向全体作业组成员宣读工作票内容，布置作业任务（《工作分工及卡控单》（详见附件6））及安全措施。作业结束后，施工负责人要及时收回工作票(附相应的命令票)，交由接触网工班统一保管不少于___个月。
【单选题】
工作票中规定的作业组成员，一般不应更换；若必须更换时，须经发票人同意，发票人不在可经施工负责人同意，但更换施工负责人时，仍须经___同意，并在工作票上签字确认。
A. 工班长
B. 安全员、
C. 发票人
D. 审票人
【单选题】
工作票中规定的作业任务完成后，作业人员需将工器具、材料撤至安全地带，拆除接地线。___确认具备送电、行车条件后，宣布作业结束，向电力调度员消除停电作业命令。
A. 工班长
B. 安全员、
C. 施工负责人
D. 作业组中最高领导人
【单选题】
同一项作业，几个作业组同时作业时，由___统一向电力调度消除停电作业命令。
A. 工班长
B. 安全员、
C. 施工负责人
D. 作业组中最高领导人
【单选题】
在正线进行，无需开行列车，但影响正线、辅助线行车，无需停止接触网供电的施工作业为___类。
A. ZA1
B. ZC1
C. ZC2
D. ZD
【单选题】
在正线车站、变电所（不含车厂）、OCC大厅等地点进行，不进入行车线路亦不影响行车，ZE类以外的施工作业为___类。
A. ZA1
B. ZC1
C. ZF
D. CF
