【多选题】
Which three design requirements must be satisfied to enable RAID-6 objects in a VMware vSAN cluster? (Choose three.)___
A. vSAN Advanced license or higher
B. vSAN stretched cluster
C. at least six hosts contributing storage
D. deduplication and compression
E. all flash configuration
查看试卷，进入试卷练习
微信扫一扫，开始刷题
相关试题
【多选题】
When using "Cluster resource percentage" for host failover capacity in vSphere HA Admission Control, the total resource requirements are calculated from which two values? (Choose two.)___
A. Total vCPUs assigned to each VM.
B. Average CPU usage on each VM over time.
C. Memory reservations on each VM.
D. Total memory assigned to each VM.
E. Average active memory on each VM over time.
F. CPU reservations on each VM.
【多选题】
Which are four attributes of the Active vCenter HA node? (Choose four)___
A. It uses the vCenter HA network to communicate with the Witness node.
B. It constantly replicates vPostgres data with the Witness node.
C. It uses a public IP address for the management interface.
D. It runs the active vCenter Server Appliance instance.
E. It uses the vCenter HA network for replication of data to the Passive node.
F. It provides a quorum to protect against split-brain situations.
【多选题】
Which are two vCenter Server two-factor authentication methods? (Choose two.)___
A. RSA SecurID
B. Smart Card
C. SAML
D. Symantec VIP
【多选题】
An administrator is creating VMkernel adapters on an ESXi 6.5 host and wants to create separate VMkernel adapters for every type of traffic in the default TCP/IP stack. Which three types of traffic can be explicitly enabled on a separate VMkernel adapter? (Choose three.)___
A. Virtual SAN traffic
B. NFS traffic
C. vMotion traffic
D. vSphere HA traffic
E. Fault Tolerance logging traffic
【多选题】
When migrating a Windows vCenter Server 6.0 to the vCenter Server Appliance 6.5, which two will be migrated by default? (Choose two.)___
A. Local Windows OS users and groups
B. Configuration
C. Custom ports
D. FQDN
E. Historical and Performance data
【多选题】
Which three types of Content Libraries exist within vSphere 6.5? (Choose three.)___
A. Remote Content Library
B. Published Content Library
C. Local Content Library
D. Shared Content Library
E. Subscribed Content Library
【多选题】
An administrator cannot enable multi-processor Fault Tolerance (SMP-FT) for a virtual machine. Which are two possible causes for this? (Choose two.)___
A. The virtual machine is running on a vSAN datastore.
B. The Fault Tolerance network is using a 10Gbit uplink.
C. The virtual machine has 6 vCPUs assigned.
D. The virtual machine has a 1TB VMDK attached.
E. The virtual machine has snapshots present.
【多选题】
Which two statements are true for Predictive DRS? (Choose two.)___
A. It balances resource utilization for virtual machines with unpredictable utilization patterns.
B. It integrates DRS with vRealize Operations Manager to balance workloads for virtual machines before resource utilization spikes occur.
C. It balances resource utilization based on a threshold's algorithm that runs each night.
D. It determines the best placement and balance of virtual machines based on a threshold's algorithm that runs each night in vCenter Server 6.5 Database.
【多选题】
Which two situations could cause a virtual machine to appear with (orphaned) appended to its name? (Choose two.)___
A. if a host failover is unsuccessful
B. if a virtual machine was removed from vCenter Server's inventory
C. if a virtual machine was deployed from template, and the template has been deleted
D. if a virtual machine is unregistered directly on the host
【多选题】
Which three requirements are needed to apply RAID 5 or RAID 6 erasure coding on a vSAN 6.2 or 6.5 object? (Choose three.)___
A. on Disk Format 3.0
B. Hybrid vSAN
C. All Flash vSAN
D. vSAN Advanced License
E. Stretched Cluster Configurations
【多选题】
An administrator sees the following error in the log files: Which two events could be the source of the error message? (Choose two.)___
A. vCenter Server failure
B. VXLAN failure
C. Disk array failure
D. Network failure
E. ESXi host failure
【多选题】
An administrator is attempting to access an ESXi host via the DCUI but is unable to do so. Which could be two possible causes? (Choose two.)___
A. The host in Qhas no out-of-band management capability (i.e. iLO/iDRAC).
B. The SSH service is disabled on the host.
C. Strict lockdown mode is enabled on the host.
D. Normal lockdown mode is enabled and the administrator is a member of the
E. xception User list.
【多选题】
Which two permissions are required to migrate a virtual machine with Storage vMotion? (Choose two.)___
A. Network > Move Network
B. Virtual Machine > Inventory > Move
C. Resource > Migrate powered on virtual machine
D. Datastore > Allocate Space
【多选题】
Which are three supported storage requirements for vCenter Server HA? (Choose three.)___
A. NFS
B. RDM
C. vSAN
D. VMFS
E. JBOD
【多选题】
Which are the two network requirements for a VMware vSAN 6.5 cluster? (Choose two.)___
A. Multicast must be enabled on the physical switches and routers that handle vSAN traffic.
B. vSAN requires IPv6 only.
C. All hosts must have a dedicated 40GbE NIC.
D. The vSAN network supported IPv4 or IPv6.
E. vSAN requires IPv4 only.
【多选题】
Which three prerequisites must be in place prior to enabling secure boot for a virtual machine? (Choose three.)___
A. VirtualMachine.Config.Settings privileges
B. an encrypted USB drive
C. Virtual Hardware version 13 or later
D. Virtual Hardware version 12 or later
E. EFI firmware
【多选题】
A user is given the "Virtual machine user (sample)" role in a vSphere 6.x environment. Which three permissions would the user be able to perform? (Choose three.)___
A. Reset a virtual machine.
B. Power on a virtual machine.
C. Move a host into a cluster.
D. Configure CD media.
E. Migrate a virtual machine with Storage vMotion.
【多选题】
Which three are supported upgrade processes for ESXi host? (Choose three.)___
A. using vSphere Auto Deploy
B. using a TFTP server
C. using Update Manager
D. using an
E. SXCLI command
【多选题】
When enabling Storage DRS on a datastore cluster, which three components are enabled as a result? (Choose three.)___
A. Space load balancing among datastore within the datastore cluster.
B. Initial placement for virtual disks based on space and I/O workload.
C. I/O load balancing among datastores within the datastore cluster.
D. Queue Depth alerting on disks within the datastore cluster.
E. Data de-duplication within the datastore cluster.
【多选题】
What are two features introduced in Network I/O Control version 3? (Choose two.)___
A. Bandwidth reservation per traffic type
B. Network resource pools
C. CoS tagging
D. Bandwidth guarantee to virtual machines
【多选题】
Which two correct virtual machine advanced configuration parameters will accomplish this? (Choose two.)___
A. isolation.device.edit.disable = “FALSE”
B. isolation.device.edit.disable = “TRUE”
C. isolation.device.connectable.disable = “FALSE”
D. isolation.device.connectable.disable = “TRUE”
【多选题】
Which three statements are correct regarding booting an ESXi Host from Fibre Channel SAN? (Choose three.)___
A. Direct connect topology is supported.
B. Each host must have its own boot LUN.
C. ESXi hosts do not require local storage.
D. Multipathing to a boot LUN on an active-passive array is supported.
E. Hosts can share one common boot LUN.
【多选题】
Which two tasks should a vSphere administrator perform if the vmkernel log reports VMFS metadata errors? (Choose two.)___
A. contact VMware technical support
B. reformat the datastore
C. check the device with VOMA
D. ignore the messages
【多选题】
Which two statements are true for a vCenterServer user account that is used for vSphere Data Protection (VDP)? (Choose two.)___
A. The user account must be assigned with Administrator role.
B. The password for the user account cannot contain spaces.
C. The user account should be created in the Single Sign-On domain
D. The user account cannot inherit required permissions from a group role.
【多选题】
Which three storage protocols are supported by Virtual Volumes? (Choose three.)___
A. FCIP
B. FCoE
C. iSCSI
D. NFS v3
E. NFS v4
【多选题】
A vSphere administrator observes a CPU spike on one of the web servers (view the Exhibit.) Which two statements can describe the cause of this activity? (Choose two.)___
A. The network packet size is too large.
B. VMware Tools is not installed.
C. Disk latency is present on the datastore.
D. The network packet size is too small.
【多选题】
Which three operations can cause VMFS metadata updates? (Choose three.)___
A. Restarting a VM using the guest OS.
B. Launching a VM console.
C. Migrating a VM with vMotion.
D. Powering a VM on or off.
E. Expanding a VMFS datastore.
【多选题】
*What two services run on all nodes in a vCenter Server HA cluster? (Choose two.)___
A. vmware-vmon
B. vmware-vpostgres
C. vmare-rbd-watchdog
D. vmware-vcha
【多选题】
Which two statements are true regarding Auto Deploy in version 6.5? (Choose two.)___
A. Auto Deploy can be configured and managed via PowerCLI.
B. Auto Deploy can be configured and managed via the vSphere Client.
C. Auto
D. eploy can be configured and managed via the vSphere Web Client.
【多选题】
What three options can improve network performance for a virtual machine? (Choose three.)___
A. MLD
B. TSO
C. NetFlow
D. LRO
E. SR-IOV
【多选题】
Which two storage technologies are supported for MSCS? (Choose two.)___
A. NFS
B. VAAI
C. iSCSI
D. FC
【多选题】
When upgrading a VMware vSAN cluster to version 6.5, which two tasks must be completed to comply with upgrade requirements and VMware-recommended best practices? (Choose two.)___
A. Use RVC to upgrade the hosts.
B. Use the latest available ESXi version.
C. Back up all VMs.
D. Use only the “Full data migration” maintenance mode option.
【多选题】
What two enhancements are in VMFS6 but not in VMFS5? (Choose two.)___
A. Support for 4k native disks
B. Support for 512e disks
C. GPT storage device partitioning
D. Automatic space reclamation
【多选题】
Which two statements describe why a vSphere DRS cluster would report load imbalance? (Choose two.)___
A. The configured migration threshold is too high.
B. The configured migration threshold is too low.
C. DRS is configured for Partially Automated.
D. Enhanced vMotion Compatibility (EVC) is enabled.
【多选题】
A vSphere Administrator must ensure that vCenter Server service is running in a domain user account rather than Local System Account. To accomplish this, the user account should have which two permissions? (Choose two.)___
A. Log on as a service.
B. Act as part of the operating system.
C. Log on as a batch job.
D. Log on locally.
【多选题】
A virtual machine fails to power on after being deployed from a template. What two remediation steps could correct this issue? (Choose two.)___
A. Increase CPU reservation
B. Decrease memory reservation
C. Increase memory reservation
D. Increase datastore capacity
E. Decrease CPU reservation
【多选题】
Which three directories are available under the vcsa-cli-installer folder of the vCenter Server Appliance installation media? (Choose three.)___
A. \mac
B. \ovftool
C. \migration-assistant
D. \win32
E. \lin64
【多选题】
What are three considerations when booting ESXihost from SAN software FCoE? (Choose three.)___
A. The VMware_FCoE_vSwitch that the installer automatically created cannot be changed.
B. Boot LUN cannot be shared with other hosts even on shared storage.
C. Multipathing is not supported at pre-boot.
D. Software FCoE boot configuration cannot be changed from within
E. SXi.
【多选题】
Which two choices are applicable to vSphere Availability? (Choose two.)___
A. Heartbeat Datastores
B. VM Startup/Shutdoown
C. Power Management
D. Admission Control
【多选题】
A user is a member of groups A and B. -VM10 and VM20 are in VM Folder. -Group A is assigned permission “Read-only” on VM Folder. What two configurations will allow the user to edit the settings for only VM10? (Choose two.)___
A. Assign group B permission “virtual machine power user” to VM10.
B. Assign group B permission “virtual machine console user” to VM10.
C. Assign group A permission “virtual machine console user” to VM10.
D. Assign group A permission “virtual machine power user” to VM10.
推荐试题
【填空题】
56、常用、紧急自检时，列车管压力应大于等于___Kpa,否则不能进行自检操作。
【填空题】
57、制动隔离装置上的熄火控制开关应放置在___控制位，紧急自检时才会熄火；放在___位，紧急自检时不熄火。
【填空题】
58、在键盘自检界面，针对每个按键，都有相应位置的按键显示，每按一个键，相应的按键会有颜色变化显示，以回应按键有效。如果需要退出键盘自检界面，按压___键，弹出“注意”窗口：“请确认退出键盘自检？”界面，把光标移动到“确定”按钮上，按压【确认】键，退出键盘自检，语音提示___。如图2-6所示。
【填空题】
59、键盘自检时应检测所有按键___，最后检测___键，完成键盘自检检测，否则没有检测的按键在数据记录分析中显示按键故障，键盘自检正常后，语音提示“自检正常”。
【填空题】
60、参数设定主要输入___等13项参数。
【填空题】
61、参数设置完成后，在主界面上会有___s当前设置的参数显示。
【填空题】
62、参数设置中，编组限速参数修改需___次确认；
【填空题】
63、参数设置时如果输入无效参数，则无法确认，语音提示“输入无效”，光标会自动跳转到___框予以提示。
【填空题】
64、司机号1、司机号2、车次：最多可以输入___位；使用调度命令发布的车次调用数据后，与实际运行方向相反时，建议规定车次使用方法。
【填空题】
65、根据运行区段、走行路径输入相应的交路___：“交路”栏输入数据交路号，“监控交路”栏输入___。交路上下行根据车次奇偶决定，偶数为上行，奇数为下行。
【填空题】
66、车站号：输入___车站对应交路的车站号，区间发车时输入___车站号，若地段特殊，输入前方车站号不能调用数据时，按___车站号输入。
【填空题】
67、公里标：即___公里标，建议按轨道车运行前方___信号机公里标或其它易于辨别的地面公里标进行输入。
【填空题】
68、若输入的对标公里标逻辑错误：不在___之间，语音提示输入无效，司机可以重新输入对标公里标。
【填空题】
69、若输入的公里标参数无法调取数据时，默认按输入车站号对应车站的___调取数据，若该车站号在本交路的上行、下行数据中均不存在，则无法调取数据，语音提示“输入无效”，DMI界面不显示车站信息；若则本行别数据交路中不存在，在相反行别的数据交路中存在，则语音提示“上行无此车站”或“下行无此车站”，DMI界面不显示车站信息。
【填空题】
70、公里标趋势：调用GYK基本数据时根据___自动设置，无需输入；未调用GYK基本数据时，根据运行方向增减趋势输入___。
【填空题】
71、编组限速：输入轨道车编组后允许的最高限速。管理参数中BTM设置为___时,编组限速设置范围为5-80km/h.管理参数中BTM设置___时,编组限速设置范围为5-120km/h；当对GYK编组限速进行修改并按压【确认】键退出参数设定界面后，DMI界面会弹出“再次确认参数”窗口，需要再次输入更改后的编组限速，如果两次输入的编组限速值不一致，会语音提示“输入无效”并文字提示两次编组限速不一致,需要重新进行输入。
【填空题】
72、总重：单位为吨。GYK出厂默认最大总重___。
【填空题】
73、辆数：连挂在一起的车辆总数。GYK出厂默认最大辆数___。
【填空题】
74、计长：整列车的长度除以11，可精确到小数点后一位。如输入2表示实际车长为22m。最大计长输入不超过___。
【填空题】
75、设定参数里的各个参数都不能超过它的范围，否则会语音提示“输入无效”，光标会自动跳转到错误参数框予以提示；参数输入时应注意观察设定窗口___的提示信息。
【填空题】
76、当GYK无___指令输出时，参数可在以下条件下修改：
【填空题】
___收到除___灯外的其他允许信号可以在实际速度___ km/h以下进行参数修改。
【填空题】
___收到___灯信号可以在实际速度___ km/h以下进行参数修改。
【填空题】
___收到___信号或按___信号控制的信号必须在停车后才能进行参数修改。
【填空题】
___区间作业模式运行中修改参数___。区间作业模式停车状态修改设定参数转为___模式。
【填空题】
不满足参数修改条件时，可以调出参数设置窗口，修改参数后，点击保存___。
【填空题】
77、揭示信息可通过U盘转储器输入，遇有无法及时编辑或传送运行揭示文件等特殊情况时，由司机___运行揭示信息。
【填空题】
78、当运行接近限速区段时，GYK右上角显示前方___km之内的有计划揭示与人工揭示，一次最多显示前方___km内的___条。
【填空题】
79、线路交汇点存在慢行限速时，若调度发布的慢行限速起点公里标不在运行线路中，司机应加强瞭望，避免进入限速地段时___。
【填空题】
①按压___键+提示信息___，可快速解除前方___km范围内的揭示，已起控的揭示不能解除。
【填空题】
②按压【查询】键，选择“3.计划揭示”将光标移到需要取消的揭示，按压___键，确认后即可解除。
【填空题】
③按压【查询】键，选择“3.计划揭示”直接按压数字键___，进入解除提示窗口。输入揭示类型、揭示序号、调度命令，将光标移到___选项上，按压【确认】键即可解除。
【填空题】
81、采用按压【确认】+序号的方式解除的揭示数据，重新调取数据后可___。
【填空题】
82、有计划揭示恢复：按压___键，选择“3.计划揭示”直接按压数字键___，进入恢复提示窗口。输入揭示类型、揭示序号、调度命令，将光标移到“确定”选项上按压【确认】键即可恢复。
【填空题】
83、揭示若被解除，则显示___色；揭示若过期，则显示___色。
【填空题】
84、若揭示下载失败，重新拔插U盘转储器，确认是否为U盘与DMI接口接触不良；如果DMI接口不良，可在___接口进行下载。如果揭示仍不能正常下载，司机必须按照管理规定进行处理。
【填空题】
85、有计划揭示下载后，将___上次下载的揭示文件；在揭示编辑时，应在揭示编辑软件中编辑当天有效的揭示文件，即删除过期的揭示文件，修改变动的揭示文件，添加新发布的揭示文件。
【填空题】
86、快速解除有计划限速的方法，只是解除当前状态下的限速控制，若参数重新设置后，快速解除的有计划限速会___。
【填空题】
87、在___窗口解除的有计划揭示，即使参数重新设置，解除的限速也不会起控。
【填空题】
88、若已下载的有计划揭示全部过期，则可通过揭示编辑软件生成一个揭示条数为___的揭示文件下载到DMI中，即可清除DMI中全部过期的有计划揭示，GYK按有计划揭示下载进行记录。
