【多选题】
What three processes on the vCenter Server Appliance (VCSA) does“vmware-watchdog monitor? (Choose three.) ___
A. vmware-eam
B. vmcad
C. vmware-vpostgres
D. vpxd
E. vsan-health
查看试卷，进入试卷练习
微信扫一扫，开始刷题
相关试题
【多选题】
What three processes on the vCenter Server Appliance (VCSA) does“vmware-watchdog monitor? (Choose three.) ___
A. vmware-eam
B. vmcad
C. vmware-vpostgres
D. vpxd
E. vsan-health
【多选题】
Which two statements correctly describe VM-Host affinity rules? (Choose two.) ___
A. When there is more than one VM-Host affinity rule in a vSphere DRS cluster, the rules are applied equally.
B. After creating a VM-Host affinity rule, its ability to function in relation to other rules is predetermined.
C. When there is more than one VM-Host affinity rule in a vSphere
D. RS cluster, the rules will be ranked.
【多选题】
An administrator wants to enable proactive HA by moving virtual machines automatically if a hardware alert is triggered. What are the three required settings? (Choose three.)___
A. Set vSphere DRS Automation to Partially Automated.
B. Turn on Proactive HA.
C. Set the Proactive HA Automation Level to Manual.
D. Set the Proactive HA Automation Level to Automated.
E. Turn on vSphere HA and vSphere DRS.
【多选题】
If vCenter Server 5.5 installation has one or more services deployed remotely, which three services are relocated to vCenter Server 6.5 on upgrade? (Choose three.)___
A. vCenter Inventory Services
B. vSphere Authentication Proxy
C. vSphere Web Client
D. vSphere
E. SXi Dump Collector
【多选题】
What two debugging levels can a virtual machine be configured to? (Choose two.)___
A. Verbose
B. Debugging
C. Statistics
D. Trivia
【多选题】
What are three benefits of using a few large-capacity LUNs instead of many small-capacity LUNs? (Choose three.) ___
A. Better performance because there is less contention for a single volume.
B. More flexibility for resizing virtual disks.
C. Less wasted storage space.
D. More flexibility to create virtual machines without adding new LUNs.
E. Fewer VMFS datastores to manage.
【多选题】
Which two configurable options are available in Boot Options for a virtual machine? (Choose two.)___
A. Tools Upgrades
B. Encryption
C. Firmware
D. Force BIOS setup
【多选题】
Which three VMware-recommended best practices should an administrator follow before upgrading to vSphere 6.5? (Choose three.)___
A. Disconnect ESXi host from vCenter.
B. VMware Tools are installed in the virtual machine.
C. Ensure that the system hardware complies with ESXi requirements.
D. Back up the host.
E. Check the interoperability of any other software integrated with vSphere.
【多选题】
What are two requirements to enable EVC in vSphere DRS cluster? (Choose two.)___
A. CPUs must be from the same vendor.
B. EVC must use the lowest possible baseline supported by the hardware.
C. CPUs must be in the same family and of the same speed.
D. No VMs may be running in the cluster.
【多选题】
What three conditions could result in VMware Flash Read Cache being unable to claim a disk? (Choose three.)___
A. The disk is not listed in the VMware hardware compatibility guide.
B. The disk is not detected as an SSD.
C. The disk is not detected as local.
D. The disk is in use by VMFs.
【多选题】
Boot from SAN is supported on which three storage technologies? (Choose three.)___
A. VMware vSAN
B. FCoE
C. NFS 4.1
D. iSCSI
E. FC
【多选题】
Which two components are part of storage I/O multipathing on ESXi? (Choose two.)___
A. SATP
B. VASA
C. PSP
D. VAAI
【多选题】
Which two statements are true about Highly Available vSphere Auto Deploy infrastructure? (Choose two.)___
A. It helps prevent data loss.
B. It is a prerequisite for using vSphere Auto Deploy with stateful install.
C. It requires two or more Auto
D. eploy servers.
【多选题】
The virtual machine log rotation size can be changed for all VMs by which two interfaces? (Choose two.)___
A. PowerCLI
B. vSphere Web Client
C. ESXi host client
D. esxcli
【多选题】
Which two configuration options can exclude virtual disks from snapshot operations? (Choose two.)___
A. Use RDM in virtual mode for virtual disk.
B. Use virtual disks in Independent – Persistent mode.
C. Use a virtual disk larger than 2 TB in size.
D. Use RDM in physical mode for virtual disk.
【多选题】
Which two storage configurations on the source server are unsupported with VMware Converter? (Choose two.)___
A. Linux LVM
B. software RAID
C. GPT/MBR hybrid disks
D. Windows basic volumes
E. Windows dynamic volumes
【多选题】
Which two statements about vCenter HA are correct? (Choose two.)___
A. ESXi 5.5 or later is required.
B. vCenter HA network latency between nodes must be less than 50 ms.
C. NFS datastore is supported.
D. It must be deployed on a 3
E. SXi host cluster with DRS enabled.
【多选题】
An attempt to delete NFS datastore from a ESXi host returns the error: Sysinfo error on operation returned the following status:< Busy> Which two statements could explain this failure? (Choose two.)___
A. NFS datastore is a part of Storage DRS Cluster.
B. NFS.VolumeRemountFrequency value is set to 30.
C. Storage I/O Control is enabled on NFS datastore.
D. NFS datastore has running or registered virtual machines.
【多选题】
An administrator finds that the Microsoft Exchange virtual machines are exhibiting network latency. What two in-guest changes can help decrease latency? (Choose two.)___
A. LRO
B. TSO
C. SR-IOV
D. PVRDMA
【多选题】
Which two types of iSCSI adapters require VMkernel networking configuration? (Choose two.)___
A. dependent hardware
B. in-guest
C. software
D. independent hardware
【多选题】
Which two statements are true for NFS v4.1 firewall behavior? (Choose two.)___
A. It closes port 2049.
B. It sets allowed. All flag to TRUE.
C. It sets allowed. All flag to FALSE.
D. It opens port 2049.
【多选题】
A vSphere Administrator attempts to enable Fault Tolerance for a virtual machine but receives the following error: Secondary VM could not be powered on as there are no compatible hosts that can accommodate it. What two options could cause this error? (Choose two.)___
A. The other ESXi host(s) are in Maintenance Mode.
B. Hardware virtualization is not enabled on the other ESXi host(s).
C. The other ESXi host(s) are in Quarantine Mode.
D. Hardware MMU is enabled on the other
E. SXi host(s).
【多选题】
Storage capabilities be populated in what two ways? (Choose two.)___
A. The administrator can use tags to describe capabilities.
B. Default capabilities are provided by vCenter Server.
C. Datastores can advertise their capabilities through VAAI.
D. Datastores can advertise their capabilities through VASA.
【多选题】
In network troubleshooting it is important to know what upstream switch the ESXi host is connected to. Which two features does ESXi provide to help identify the upstream switch? (Choose two.)___
A. Promiscuous mode
B. DPM
C. LLDP
D. CDP
【多选题】
Virtual Volumes supports which three VMware features? (Choose three.)___
A. Instant Clones
B. Distributed Resource Scheduler
C. Linked Clones
D. vMotion
E. Storage Distributed Resource Scheduler
【多选题】
vSphere DRS helps to balance virtual machines with available resources in a vSphere cluster. What three types of resources can be taken into account for balancing? (Choose three.)___
A. CPU
B. physical NIC saturation of an ESXi host
C. virtual NIC saturation of a virtual machine
D. RAM
E. storage latency
【多选题】
Which three design requirements must be satisfied to enable RAID-6 objects in a VMware vSAN cluster? (Choose three.)___
A. vSAN Advanced license or higher
B. vSAN stretched cluster
C. at least six hosts contributing storage
D. deduplication and compression
E. all flash configuration
【多选题】
When using "Cluster resource percentage" for host failover capacity in vSphere HA Admission Control, the total resource requirements are calculated from which two values? (Choose two.)___
A. Total vCPUs assigned to each VM.
B. Average CPU usage on each VM over time.
C. Memory reservations on each VM.
D. Total memory assigned to each VM.
E. Average active memory on each VM over time.
F. CPU reservations on each VM.
【多选题】
Which are four attributes of the Active vCenter HA node? (Choose four)___
A. It uses the vCenter HA network to communicate with the Witness node.
B. It constantly replicates vPostgres data with the Witness node.
C. It uses a public IP address for the management interface.
D. It runs the active vCenter Server Appliance instance.
E. It uses the vCenter HA network for replication of data to the Passive node.
F. It provides a quorum to protect against split-brain situations.
【多选题】
Which are two vCenter Server two-factor authentication methods? (Choose two.)___
A. RSA SecurID
B. Smart Card
C. SAML
D. Symantec VIP
【多选题】
An administrator is creating VMkernel adapters on an ESXi 6.5 host and wants to create separate VMkernel adapters for every type of traffic in the default TCP/IP stack. Which three types of traffic can be explicitly enabled on a separate VMkernel adapter? (Choose three.)___
A. Virtual SAN traffic
B. NFS traffic
C. vMotion traffic
D. vSphere HA traffic
E. Fault Tolerance logging traffic
【多选题】
When migrating a Windows vCenter Server 6.0 to the vCenter Server Appliance 6.5, which two will be migrated by default? (Choose two.)___
A. Local Windows OS users and groups
B. Configuration
C. Custom ports
D. FQDN
E. Historical and Performance data
【多选题】
Which three types of Content Libraries exist within vSphere 6.5? (Choose three.)___
A. Remote Content Library
B. Published Content Library
C. Local Content Library
D. Shared Content Library
E. Subscribed Content Library
【多选题】
An administrator cannot enable multi-processor Fault Tolerance (SMP-FT) for a virtual machine. Which are two possible causes for this? (Choose two.)___
A. The virtual machine is running on a vSAN datastore.
B. The Fault Tolerance network is using a 10Gbit uplink.
C. The virtual machine has 6 vCPUs assigned.
D. The virtual machine has a 1TB VMDK attached.
E. The virtual machine has snapshots present.
【多选题】
Which two statements are true for Predictive DRS? (Choose two.)___
A. It balances resource utilization for virtual machines with unpredictable utilization patterns.
B. It integrates DRS with vRealize Operations Manager to balance workloads for virtual machines before resource utilization spikes occur.
C. It balances resource utilization based on a threshold's algorithm that runs each night.
D. It determines the best placement and balance of virtual machines based on a threshold's algorithm that runs each night in vCenter Server 6.5 Database.
【多选题】
Which two situations could cause a virtual machine to appear with (orphaned) appended to its name? (Choose two.)___
A. if a host failover is unsuccessful
B. if a virtual machine was removed from vCenter Server's inventory
C. if a virtual machine was deployed from template, and the template has been deleted
D. if a virtual machine is unregistered directly on the host
【多选题】
Which three requirements are needed to apply RAID 5 or RAID 6 erasure coding on a vSAN 6.2 or 6.5 object? (Choose three.)___
A. on Disk Format 3.0
B. Hybrid vSAN
C. All Flash vSAN
D. vSAN Advanced License
E. Stretched Cluster Configurations
【多选题】
An administrator sees the following error in the log files: Which two events could be the source of the error message? (Choose two.)___
A. vCenter Server failure
B. VXLAN failure
C. Disk array failure
D. Network failure
E. ESXi host failure
【多选题】
An administrator is attempting to access an ESXi host via the DCUI but is unable to do so. Which could be two possible causes? (Choose two.)___
A. The host in Qhas no out-of-band management capability (i.e. iLO/iDRAC).
B. The SSH service is disabled on the host.
C. Strict lockdown mode is enabled on the host.
D. Normal lockdown mode is enabled and the administrator is a member of the
E. xception User list.
【多选题】
Which two permissions are required to migrate a virtual machine with Storage vMotion? (Choose two.)___
A. Network > Move Network
B. Virtual Machine > Inventory > Move
C. Resource > Migrate powered on virtual machine
D. Datastore > Allocate Space
推荐试题
【单选题】
6在DIP40封装的8×51芯片里，复位RESET引脚的引脚编号是什么？___
【单选题】
7在DIP40封装的8×51芯片里，接地引脚与电源引脚的引脚编号是什么？___
A. 1、21
B. 11.31
C. 20、40
D. 19、39
【单选题】
9在12MHz始终脉冲的8051系统里，一个机器周期有多长？___
A. 1µs
B. 12µs
C. 1ms
D. 12ms
【单选题】
12下列哪个寄存器是8×51内的16位寄存器？___
【单选题】
14在8×51的输入/输出端口里，哪个输入/输出端口执行在输出功能时没有内部上拉电阻？___
【单选题】
8×51的P0采用哪种电路结构？___
A. 集电极开路式输出
B. 基极开路式输出
C. 发射机开路式输出
D. 图腾柱输出
【单选题】
17在8×51里，若要扩展外部存储器时，数据总线连接哪个输入/输出端口？___
【单选题】
点亮一般的LED所耗用的电流约为多少？___
A. 1~5µA
B. 10~20µA
C. 1~5mA
D. 10~20mA
【单选题】
19一般地，蜂鸣器属于哪种负载？___
A. 电阻性负载
B. 电感性负载
C. 电容性负载
D. 不导电负载
【单选题】
7405/7406的输出采用哪种电路结构？___
A. 集电极开路式输出
B. 基极开路式输出
C. 发射机开路式输出
D. 图腾柱输出
【单选题】
21在继电器中，NO接点是一种什么接点？___
A. 不使用接点
B. 不存在接点
C. 激磁后即开路的接点
D. 常开接点
【单选题】
22所谓2P的继电器，代表什么意思？___
A. 只有2个接点
B. 两相的负载
C. 两组电源
D. 2组c接点
【单选题】
23共阳极七段数码管显示器的驱动信号有何特色？___
A. 低电平点亮
B. 低电平不亮
C. 高电平点亮
D. 以上皆非
【单选题】
24在8×51的程序里，若要将某个输入/输出端口设置成输入功能，应如何处理？___
A. 先输出高电平到该输入/输出端口
B. 先输出低电平到该输入/输出端口
C. 先读取该输入/输出端口的状态
D. 先保存该输入/输出端口的状态
【单选题】
8×51提供几个外部中断和定时器/计数器中断？___
A. 2,2
B. 3,6
C. 2,3
D. 3,7
【单选题】
8×51的IP缓存器的功能如何？___
A. 设置中断优先级
B. 启动中断功能
C. 设置中断触发信号
D. 定义CPU的网址
【单选题】
28若要让采用低电平触发，则应如何设置？___
A. EX0=0
B. EX0=1
C. IT0=0
D. IT0=1
【单选题】
29在Keil µVision3里进行调试/仿真时，在哪里操作才能触动程序中断？___
A. 在Interrupt System
B. 在Cotorl Box对话框里
C. 直接单击魔术棒按钮即可
D. 直接按0键
【单选题】
30在8×51所提供的中断功能里，下列哪个优先级比较高？___
A. T1
B. RI/TI
C. T0
D. INT0
【单选题】
31在TCON缓存里，IE1的功能是什么？___
A. 触发 IE1中断
B. 指示IE1中断的标志
C. 提高IE1优先等级
D. 取消IE1中断
【单选题】
32在Keil C里，中断子程序与函数又何不同？___
A. 中断子程序不必声明
B. 函数不必声明
C. 中断子程序必须有形式参数
D. 中断子程序一定会有返回值
【单选题】
33若要同时启用INT0及INT1中断功能，则应如何设置？___
A. TCON=0×81
B. IE=0×85
C. IP=0×83
D. IE=0×03
【单选题】
35在8×51的Timer里，若使用Mode 0，其最大计数值为多少个机器周期？___
A. 65636
B. 8192
C. 1024
D. 256
【单选题】
36在12MHz的8×51系统里，哪一种方式一次可定时5ms？___
A. Mode 0及Mode 1
B. Mode 1及Mode 2
C. Mode 2及Mode 3
D. Mode3及Mode 1
【单选题】
37若要让Timer作为外部计数只用，应如何设置？___
A. Gate=0
B. Gate=1
C. C/=0
D. C/=1
【单选题】
39下列哪个不是8×51所提供的省电方式？___
A. PD方式
B. IDL方式
C. LP方式
D. 待机方式
【单选题】
89S51的看门狗有何作用？___
A. 重复执行程序
B. 找回遗失数据
C. 复位系统
D. 防止中毒
【单选题】
41若要启用WDT，则应依次填入WDTRST寄存器哪些数据？___
A. 0xe1、0xe2
B. 0xe1、0x1e
C. 0x1e、0xe1
D. 0x10、0x01
【单选题】
8×51的定时器，在下列哪种方式下具有自动加载功能？___
A. Mode0
B. Mode1
C. Mode2
D. Mode3
【单选题】
45下列哪种AD转换器的转换速度比较快？___
A. 双斜率型AD转换器
B. 比较型AD转换器
C. 连续计数式AD转换器
D. 逐渐接近式AD转换器
【单选题】
46下列哪种AD转换器的精密度比较高？___
A. 双斜率型AD转换器
B. 比较型AD转换器
C. 连续计数式AD转换器
D. 逐步逼近式AD转换器
【单选题】
47对于8×8 LED点阵而言，其中的LED个数及引脚各为多少？___
A. 64、16
B. 16、16
C. 64、12
D. 32、12
【单选题】
48在共阳极型8×8 LED点阵里，其阳极如何连接？___
A. 各行阳极连接到行引脚
B. 各列阳极连接到列引脚
C. 各行阳极连接到列引脚
D. 各列阳极连接到行引脚
【单选题】
49在共阳极型8×8 LED点阵里，其阴极如何连接？___
A. 各行阴极连接到行引脚
B. 各列阴极连接到列引脚
C. 各行阴极连接到列引脚
D. 各列阴极连接到行引脚
【单选题】
50双色8×8 LED点阵的列引脚与行引脚各位多少？___
A. 12、12
B. 8、16
C. 16、8
D. 24、8
【单选题】
___的方向规定由高电位点指向低电位点。
【单选题】
三相电动势到达最大的顺序是不同的，这种达到最大值的先后次序，称三相电源的相序，相序为U-V-W-U，称为___。
【单选题】
电路的作用是实现能量的传输和转换、信号的___和处理。
【单选题】
电阻器反映导体对电流起阻碍作用的大小，简称___。
A. 电动势
B. 功率
C. 电阻率
D. 电阻
【单选题】
___反映了在不含电源的一段电路中，电流与这段电路两端的电压及电阻的关系。
A. 欧姆定律
B. 楞次定律
C. 部分电路欧姆定律
D. 全欧姆定律
