【单选题】
The networking team has requested to have a dedicated network for iSCSI traffic. This task has been assigned to the vSphere Administrator. What is the VMware-recommended way to accomplish this?___
A. Configure Static Routes on each ESXi Server.
B. Configure the right subnet.
C. Create a custom IP Stack.
D. Define a dedicated gateway for the iSCSI vmkernel.
查看试卷，进入试卷练习
微信扫一扫，开始刷题
相关试题
【单选题】
To prevent possible failures or issues during a vSphere upgrade, which component should be upgraded first?___
A. ESXi Hosts
B. virtual machines
C. datastores
D. vCenter Server
【单选题】
What is the command for updating an ESXi host?___
A. esxcli software vib update –d /vmfs/volumes/Datastore/DirectoryName/PatchName.zip
B. esxupdate software update –d”/vmfs/volumes/Datastore/DirectoryName/PatchName.zip”
C. esxcli software update –d “/vmfs/volumes/Datastore/DirectoryName/PatchName.zip”
D. esxupdate software vib update –d /vmfs/volumes/Datastore/DirectoryName/PatchName.zip
【单选题】
A vSphere Administrator would like to identify which physical NUMA node their virtual machine is currently residing on. What esxtop metric would provide this information?___
A. GST_ND[x]
B. OVD_ND[x]
C. NRMEM
D. NHN
【单选题】
How can a vSphere administrator ensure that two virtual machines never run on the same datastore in a datastore cluster, while permitting the VMs to be load-balanced?___
A. Use an Intra-VM Anti-Affinity Rule.
B. Configure a storage DRS VM override.
C. Disable storage
D. RS for the VMs.
【单选题】
What is the VMware-recommended way to move a physical adapter out of Network I/O Control’s scope?___
A. Set the teaming policy to “Route Based on Physical NIC Load.”
B. Add the vmnic to the Net.NetNiocAllowOverCommit parameter in Advanced System Settings.
C. Add the vmnic to the Net.IOControlPnicOptOut parameter in Advanced System Settings.
D. Move the vmnic to a different vmUplink port on the Distributed Switch.
【单选题】
A VM folder contains VM1 and VM2. Group A has permission to power on virtual machines, defined on the VM folder and its children. Group B has permission to power off virtual machines, defined on the VM folder and its children. If a user is a member of Groups A and B, what will be the user’s effective permission on VM1 and VM2?___
A. Power on
B. Power off.
C. Power on and Power off.
D. Reset.
【单选题】
Group 1 is granted console interaction on a VM folder. User 1 is granted no console interaction on the same VM folder. What will be the outcome if User 1 tries to access the console of a virtual machine?___
A. User 1 will not be able to access the virtual machines in the VM folder.
B. User 1 will not have access to the virtual machine console.
C. User 1 will have access to the virtual machine console.
D. User 1 will have console access only via the vSphere Web Client.
【单选题】
Which statement is true regarding the use of VMFS3 datastores with vSphere 6.5?___
A. VMFS3 datastores can be used but not created.
B. VMFS3 datastores can be neither used nor created.
C. VMFS3 datastores will be present but unmounted.
D. VMFS3 datastores can be created and used.
【单选题】
In the Exhibit, each VM has a 1GHz non-expandable reservation. If all VMs are powered on in sequence, what would be the outcome?___
A. VM4 cannot be powered on.
B. VM5 cannot be powered on.
C. VM6 cannot be powered on.
D. VM3 cannot be powered on.
【单选题】
vSphere 6.5 introduced MAClearning capabilities for VMware’s virtual switches. What three benefits will it provide? (Choose three.)___
A. Reduced memory consumption.
B. Reduced consumption of extra CPU cycles.
C. Increased network throughput.
D. Prevent packet flooding inside the vSwitch.
【单选题】
What is the default pathing policy for most active-active arrays?___
A. Fixed
B. Most Recently Used
C. Dynamic
D. isk Morroring
【单选题】
Which command will show the iSCSI sessions on a ESXi 6.5 host?___
A. esxcli storage iscsi session get
B. esxcli iscsi session get
C. esxcli storage iscsi session
D. esxcli iscsi session list
【单选题】
Which of the following is not a parameter for traffic filtering or marking?___
A. virtual port ID
B. Protocol
C. Traffic Direction
D. DSCP value
E. Traffic redirection
【单选题】
A vSphere administrator wants to enable a virtual machine with Secure Boot, but in VM setting, Secure Boot option was not found under Boot Options. What could be the cause?___
A. The virtual hardware is not compatible.
B. The virtual machine has missing drivers.
C. The virtual machine OS does not support secure boot.
D. VMware Tools is not upgraded.
【单选题】
A virtual machine is connected on a distributed port group where the average bandwidth configured in the traffic shaping policy is 100 Mbps. The VM network adapter is configured with a reservation of 200 Mbps. What is the VM’s effective bandwidth?___
A. 200 Mbps
B. 100 Mbps
C. 150 Mbps
D. 400 Mbps
【多选题】
What are two reasons why a datastore in a Storage DRS cluster cannot enter maintenance mode?(Choose two.)___
A. Storage latency is too high to allow Storage DRS initiate Storage vMotion.
B. Storage DRS is configured for a VMFS3 datastore.
C. Storage
D. RS is disabled on the virtual disk.
【多选题】
What two methods are used to configure VMware vSphere Storage I/O Control shares and limits? (Choose two.)___
A. Assign shares and limits to VM virtual disks.
B. Assign shares and limits to datastores.
C. Assign shares and limits to Storage (DRS) clusters.
D. Assign shares and limits using VM storage policies.
【多选题】
ESXi 6.5 introduces VMFS6, which supports both 512e and 512n devices. What three configurations are supported when using these devices? (Choose three.) ___
A. Hosts with both 512e and 512n devices.
B. Storage vMotion between both 512e and 512n devices.
C. Datastore Extents spanned between both 512e and 512n devices.
D. Storage DRS clusters containing only both 512e and 512n devices.
【多选题】
A vSphere Administrator observes that the Primary VM configured with Fault Tolerance is executing slowly. After further investigation, it is determined that the Secondary VM is on an overcommitted ESXi host. What two methods will correct the problem? (Choose two.)___
A. Use Storage vMotion to migrate the Secondary VM to another datastore.
B. Use vMotion to migrate the Secondary VM to a different ESXi host.
C. Configure a CPU limit on the Primary VM which will also apply to the Secondary VM.
D. Turn off and turn on FT in order to recreate the Secondary VM on a different datastore.
【多选题】
Which two features require the use of Host Profiles? (Choose two.)___
A. Host Customizations
B. shared storage
C. Auto
D. eploy
【多选题】
What three processes on the vCenter Server Appliance (VCSA) does“vmware-watchdog monitor? (Choose three.) ___
A. vmware-eam
B. vmcad
C. vmware-vpostgres
D. vpxd
E. vsan-health
【多选题】
What three processes on the vCenter Server Appliance (VCSA) does“vmware-watchdog monitor? (Choose three.) ___
A. vmware-eam
B. vmcad
C. vmware-vpostgres
D. vpxd
E. vsan-health
【多选题】
Which two statements correctly describe VM-Host affinity rules? (Choose two.) ___
A. When there is more than one VM-Host affinity rule in a vSphere DRS cluster, the rules are applied equally.
B. After creating a VM-Host affinity rule, its ability to function in relation to other rules is predetermined.
C. When there is more than one VM-Host affinity rule in a vSphere
D. RS cluster, the rules will be ranked.
【多选题】
An administrator wants to enable proactive HA by moving virtual machines automatically if a hardware alert is triggered. What are the three required settings? (Choose three.)___
A. Set vSphere DRS Automation to Partially Automated.
B. Turn on Proactive HA.
C. Set the Proactive HA Automation Level to Manual.
D. Set the Proactive HA Automation Level to Automated.
E. Turn on vSphere HA and vSphere DRS.
【多选题】
If vCenter Server 5.5 installation has one or more services deployed remotely, which three services are relocated to vCenter Server 6.5 on upgrade? (Choose three.)___
A. vCenter Inventory Services
B. vSphere Authentication Proxy
C. vSphere Web Client
D. vSphere
E. SXi Dump Collector
【多选题】
What two debugging levels can a virtual machine be configured to? (Choose two.)___
A. Verbose
B. Debugging
C. Statistics
D. Trivia
【多选题】
What are three benefits of using a few large-capacity LUNs instead of many small-capacity LUNs? (Choose three.) ___
A. Better performance because there is less contention for a single volume.
B. More flexibility for resizing virtual disks.
C. Less wasted storage space.
D. More flexibility to create virtual machines without adding new LUNs.
E. Fewer VMFS datastores to manage.
【多选题】
Which two configurable options are available in Boot Options for a virtual machine? (Choose two.)___
A. Tools Upgrades
B. Encryption
C. Firmware
D. Force BIOS setup
【多选题】
Which three VMware-recommended best practices should an administrator follow before upgrading to vSphere 6.5? (Choose three.)___
A. Disconnect ESXi host from vCenter.
B. VMware Tools are installed in the virtual machine.
C. Ensure that the system hardware complies with ESXi requirements.
D. Back up the host.
E. Check the interoperability of any other software integrated with vSphere.
【多选题】
What are two requirements to enable EVC in vSphere DRS cluster? (Choose two.)___
A. CPUs must be from the same vendor.
B. EVC must use the lowest possible baseline supported by the hardware.
C. CPUs must be in the same family and of the same speed.
D. No VMs may be running in the cluster.
【多选题】
What three conditions could result in VMware Flash Read Cache being unable to claim a disk? (Choose three.)___
A. The disk is not listed in the VMware hardware compatibility guide.
B. The disk is not detected as an SSD.
C. The disk is not detected as local.
D. The disk is in use by VMFs.
【多选题】
Boot from SAN is supported on which three storage technologies? (Choose three.)___
A. VMware vSAN
B. FCoE
C. NFS 4.1
D. iSCSI
E. FC
【多选题】
Which two components are part of storage I/O multipathing on ESXi? (Choose two.)___
A. SATP
B. VASA
C. PSP
D. VAAI
【多选题】
Which two statements are true about Highly Available vSphere Auto Deploy infrastructure? (Choose two.)___
A. It helps prevent data loss.
B. It is a prerequisite for using vSphere Auto Deploy with stateful install.
C. It requires two or more Auto
D. eploy servers.
【多选题】
The virtual machine log rotation size can be changed for all VMs by which two interfaces? (Choose two.)___
A. PowerCLI
B. vSphere Web Client
C. ESXi host client
D. esxcli
【多选题】
Which two configuration options can exclude virtual disks from snapshot operations? (Choose two.)___
A. Use RDM in virtual mode for virtual disk.
B. Use virtual disks in Independent – Persistent mode.
C. Use a virtual disk larger than 2 TB in size.
D. Use RDM in physical mode for virtual disk.
【多选题】
Which two storage configurations on the source server are unsupported with VMware Converter? (Choose two.)___
A. Linux LVM
B. software RAID
C. GPT/MBR hybrid disks
D. Windows basic volumes
E. Windows dynamic volumes
【多选题】
Which two statements about vCenter HA are correct? (Choose two.)___
A. ESXi 5.5 or later is required.
B. vCenter HA network latency between nodes must be less than 50 ms.
C. NFS datastore is supported.
D. It must be deployed on a 3
E. SXi host cluster with DRS enabled.
【多选题】
An attempt to delete NFS datastore from a ESXi host returns the error: Sysinfo error on operation returned the following status:< Busy> Which two statements could explain this failure? (Choose two.)___
A. NFS datastore is a part of Storage DRS Cluster.
B. NFS.VolumeRemountFrequency value is set to 30.
C. Storage I/O Control is enabled on NFS datastore.
D. NFS datastore has running or registered virtual machines.
【多选题】
An administrator finds that the Microsoft Exchange virtual machines are exhibiting network latency. What two in-guest changes can help decrease latency? (Choose two.)___
A. LRO
B. TSO
C. SR-IOV
D. PVRDMA
推荐试题
【单选题】
(71669)BSP客车充电机应急供电不能自动切换的原因是( )。[322110204](1.0分)___
A. 主电路中直流接触器不吸合
B. 充电机控制板上个别电子元器件坏
C. 蓄电池电压在DC 42 V以下
D. ABC三项
【单选题】
(71670)BSP客车充电机在使用时应注意：在车辆整备长期放置不用时，尽量每隔( )给蓄电池充一次电，并注意将蓄电池箱内的断路器断开。[312120304](1.0分)___
A. 1个月
B. 3个月
C. 6个月
D. 1年
【单选题】
(71671)TCL-12型开水炉控制箱上工作指示灯连续闪烁两次表明( )。[313110204](1.0分)___
A. IGBT管温度过高或进水温度超过45 ℃
B. IGBT管过热损坏
C. 开水炉处于保温状态
D. 开水炉处于加热状态
【单选题】
(71672)电开水炉进水电磁阀关闭不严不会造成( )。[312110204](1.0分)___
A. 开水炉不工作
B. 出水温度过低
C. 溢气管溢水比较多
D. 产温水
【单选题】
(71673)轴温传感器的有两根导线“＋”和“－”，其含义是( )。[322120214](1.0分)___
A. )“＋”代表电源正线，“－”代表电源负线
B. “＋”和“－”都是信号线
C. “＋”代表公共线，“－”代表通信线
D. “＋”代表通信线，“－”代表公共线
【单选题】
(71674)快达KD-3型电开水炉的3号电极的作用是( )。[312110205](1.0分)___
A. 冷水箱水位低于此电极时，电磁阀自动通电进水
B. 冷水箱水位高于此电极时，电磁阀自动断电停止进水
C. 冷水箱水位低于此电极时，煮水箱内的发热管自动断电停止工作
D. 冷水箱水位高于此电极时，煮水箱内的发热管自动通电开始工作
【单选题】
(71675)TCL-12型开水炉工作指示灯亮但不加热有可能由( )原因造成。[312120404](1.0分)___
A. 感应线圈与加热腔绝缘击穿
B. 感应线圈开路
C. 水位显示及传感器组件失效
D. 电磁阀故障
【单选题】
(71676)KSL-Ⅲ型电开水炉工作正常但始终无法到达满水位，其原因可能是( )。[312110404](1.0分)___
A. 溢气管堵塞
B. 缺水保护器作用不良
C. 电源缺相
D. 电加热管开路
【单选题】
(71677)造成KSL-Ⅲ型电开水炉开关置“通”位后接触器吸合时、配电室空气开关跳闸，其原因可能是( )。[313120404](1.0分)___
A. 进水管堵塞
B. 电热管或电源线有对地短路现象
C. 缺水或满水保护干簧管绝缘不良
D. 电磁阀损坏
【单选题】
(71678)KZS/M-Ⅰ型轴温报警器的正常工作电压是( )。[322120214](1.0分)___
A. 42～60 V
B. 36～60 V
C. 36～72 V
D. 42～72 V
【单选题】
(71679)利用TFX1型电子防滑器测试塞拉门5 km/h的保护作用是否良好应( )。[313210216](1.0分)___
A. 按“诊断”按钮超过5 s进入自检，直至显示“88”说明作用良好
B. 按“显示”按钮超过5 s进入自检，直至显示“88”说明作用良好
C. 同时按“显示”和“诊断”按钮超过5 s进入自检，直至显示“88”说明作用良好
D. 同时按“清除”和“诊断”按钮超过5 s进入自检，直至显示“88”说明作用良好
【单选题】
(71680)KSL-Ⅲ型电开水炉主要元件为( )，在工作时主要由磁性浮球上升或下降，实现自动加热或发出报警停止加热作用。[322110223](1.0分)___
A. UK1干簧管
B. 电磁阀
C. 接触器
D. 继电器
【单选题】
(71681)KSL-Ⅲ型电开水炉干簧管引出三根线，( )接电源线。[322110228](1.0分)___
【单选题】
(71682)KSL-Ⅲ型电开水炉，各部电气连接可靠绝缘电阻应大于等于( )。[322110202](1.0分)___
A. 2 M
B. 0.5 M
C. 1 M
D. 1.5 M
【单选题】
(71683)KZS/M-Ⅰ型轴温报警器在客车配电箱接线端子排上的接线1～8应接( )。[322120228](1.0分)___
A. 1～8轴位轴温传感器线
B. 环温传感器线
C. 公共线
D. 通信线
【单选题】
(71684)KZS/M-Ⅰ型轴温报警器在客车配电箱接线端子排上的接线9应接( )。[321120228](1.0分)___
A. 1～8轴位轴温传感器线
B. 环温传感器线
C. 公共线
D. 通信线
【单选题】
(71685)DR50-16CT2型全自动电开水炉整机绝缘电阻为( )。[321120302] (1.0分)___
A. 热态≥2 M
B. 冷态≥1 M
C. 冷态≥100 ， 热态≥100
D. 冷态≥2 ， 热态≥2
【单选题】
(71686)TCL-12型电开水炉整机绝缘电阻为( )。[322120202](1.0分)___
A. 冷态≥2 M ，热态≥0.5 M
B. 热态≥2 M ，冷态≥0.5 M
C. 冷态≥1 M ，热态≥1 M
D. 冷态≥1 M ，热态≥0.5 M
【单选题】
(71687)DR50-16CT2型全自动电开水炉“沸腾”灯不亮，开水炉不煮水的原因可能是( )。[322210204](1.0分)___
A. 供水水压不正常
B. 供水阀门意外关闭
C. 滤水器的“滤芯”被堵塞
D. ABC三项
【单选题】
(71688)TCL-12型电开水炉出水温度低，排气管溢水多的原因可能是( )。[322120204](1.0分)___
A. 过滤器脏堵
B. 感应线圈开路
C. 电磁阀关闭不严
D. ABC三项
【单选题】
(71689)KSQ-Ⅵ型电开水炉在平衡水箱上部设有( )水位探头，用以探测加热腔水位变化，从而进行加热控制、缺水报警和电磁阀进水控制。[321110511](1.0分)___
【单选题】
(71690)TCL-12型电开水炉电开水炉的功率为( )。[312120223](1.0分)___
A. 4.5 kW
B. 10 kW
C. 15 kW
D. 8 kW
【单选题】
(71691)KSQ-Ⅵ型电开水炉在平衡水箱上部设有( )水位探头，用以探测加热腔水位变化，从而进行加热控制、缺水报警和电磁阀进水控制。[321110511](1.0分)___
【单选题】
(71692)TCL-12型电开水炉主回路三相交流电源经断路器、熔断器进入电控箱，再经三相整流桥转变成( )左右直流电。[312120213](1.0分)___
A. 1 000 V
B. 500 V
C. 380 V
D. 220 V
【单选题】
(71693)KZS/M-Ⅰ型轴温数据监测记录仪的记录间隔时间为( )。[322110214](1.0分)___
A. 10 min
B. 30 min
C. 1 h
D. ABC三项都可以
【单选题】
(71694)KZS/M-Ⅰ型轴温数据监测记录仪可记录( )组轴温数据和1 034组报警数据。[323110214](1.0分)___
A. 2 000
B. 3 000
C. 1 034
D. 2 068
【单选题】
(71695)将整块的金属导体放于交变磁场中，将在金属块内产生闭合的旋涡状的感应电流，称之为( )。[222110206](1.0分)___
【单选题】
(71696)KZS/M-Ⅰ型轴报器当某一车厢某一轴位的轴温超过环温40 ℃，或轴温达到( )时，全列车所有仪器都报警并显示超温的车厢号、轴位和轴温，蜂鸣器鸣叫且超温轴的轴温数据和报警指示灯闪烁。[321110214](1.0分)___
A. 90 ℃
B. 70 ℃
C. 40 ℃
D. 50 ℃
【单选题】
(71697)KZS/M-Ⅰ型集中轴温报警器对车体通信线路的基本要求：用专用线或播音线作通信线，整列车二根线之间的电阻应( )，否则，会对各KZS/M-Ⅰ通信产生不良影响。[221110214](1.0分)___
A. 不小于2 ，不大于30
B. 不小于2 ，不大于50
C. 不小于1 ，不大于50
D. 不小于2 ，不大于40
【单选题】
(71698)DR50-16CT2型电开水炉总功率为( )。[321110313](1.0分)___
A. 5 kW
B. 10 kW
C. 15 kW
D. 20 kW
【单选题】
(71699)BSP客车GERKEN接地装置的主要功能是提供( )与车轴之间的接地电流回路。[321110223](1.0分)___
A. 转向架
B. 车底架
C. 电器设备
D. 车轮
【单选题】
(71700)DR50-16CT2型电开水炉工作时，若冷水箱水位低于( )电极，电磁阀自动通电进水。[321110205](1.0分)___
【单选题】
(71701)SWKP AS 20C防滑器系统的速度传感器与齿轮顶径向的间隙为( )。[322110202](1.0分)___
A. 1.0 mm±0.2 mm
B. 1.0 mm±0.5 mm
C. 1.5 mm±0.2 mm
D. 1.5 mm±0.5 mm
【单选题】
(71702)SWKP AS 20R防滑器系统排放电磁阀由内部电源( )额定电压控制。[322110505](1.0分)___
A. 24 V
B. 48 V
C. 110 V
D. 220 V
【单选题】
(71703)SWKP AS 20R防滑器系统的故障诊断由电子装置的四数字显示器发生，正常作业在显示器上显示为代码( )。[322110213](1.0分)___
【单选题】
(71704)SWKP AS 20R防滑器系统CPU面板按钮1-Display的功能是( )。[322110213](1.0分)___
A. 故障诊断(显示)
B. 测试
C. 清除故障存储
D. 门试验
【单选题】
(71705)SWKP AS 20R防滑器系统在出现错误时，显示代码将不再是99，除此之外，调试代码为89，并且显示试验代码为( )。[322120314](1.0分)___
A. 8888
B. 95
C. 72
D. 73
【单选题】
(71706)BSP客车塞拉门在车速大于等于( )信号产生后，集控的各种操作不起作用。[311110204](1.0分)___
A. 1 km/h
B. 2 km/h
C. 5 km/h
D. 10 km/h
【单选题】
(71707)104电空制动机电器部分的绝缘状态应良好，各电器部件、传输导线及之间的绝缘电阻不小于( )。[321110302](1.0分)___
A. 0.1 M入内容
B. 0.2 M
C. 1.0 M
D. 2.0 M
【单选题】
(71708)TFX1防滑器检测C与G，P与G的电阻值须为( )。[321110202](1.0分)___
A. 100
B. 50
C. 180～350
D. 700
