【单选题】
vSphere 6.5 DRS is now Network-Aware. Based on network utilization, when will DRS balance VMs?___
A. DRS will balance VMs when a network resource pool is configured for VMs.
B. DRS will balance VMs when Network I/O Control is enabled.
C. DRS will place VMs on initial boot for hosts that have network utilization lower that the threshold.
D. DRS will vMotion VMs when network utilization is higher than the threshold on a particular host.
查看试卷，进入试卷练习
微信扫一扫，开始刷题
相关试题
【单选题】
A scripted upgrade of ESXi fails due to an incorrect parameter in the upgrade script. What file must the administrator modify to correct the problem?___
A. vmreconfig.pl
B. hostinfo.pl
C. ks.cfg
D. boot.cfg
【单选题】
A VM folder contains VM1 and VM2. Group A has permission to power on virtual machines, defined on the VM folder and its children. Group B has permission to power off virtual machine VM2. If a user is a member of group A and B, what action can the user perform?___
A. Suspend VM2.
B. Power off VM1.
C. Power on and power off VM1.
D. Power on and power off VM2.
【单选题】
The networking team has requested to have a dedicated network for iSCSI traffic. This task has been assigned to the vSphere Administrator. What is the VMware-recommended way to accomplish this?___
A. Configure Static Routes on each ESXi Server.
B. Configure the right subnet.
C. Create a custom IP Stack.
D. Define a dedicated gateway for the iSCSI vmkernel.
【单选题】
To prevent possible failures or issues during a vSphere upgrade, which component should be upgraded first?___
A. ESXi Hosts
B. virtual machines
C. datastores
D. vCenter Server
【单选题】
What is the command for updating an ESXi host?___
A. esxcli software vib update –d /vmfs/volumes/Datastore/DirectoryName/PatchName.zip
B. esxupdate software update –d”/vmfs/volumes/Datastore/DirectoryName/PatchName.zip”
C. esxcli software update –d “/vmfs/volumes/Datastore/DirectoryName/PatchName.zip”
D. esxupdate software vib update –d /vmfs/volumes/Datastore/DirectoryName/PatchName.zip
【单选题】
A vSphere Administrator would like to identify which physical NUMA node their virtual machine is currently residing on. What esxtop metric would provide this information?___
A. GST_ND[x]
B. OVD_ND[x]
C. NRMEM
D. NHN
【单选题】
How can a vSphere administrator ensure that two virtual machines never run on the same datastore in a datastore cluster, while permitting the VMs to be load-balanced?___
A. Use an Intra-VM Anti-Affinity Rule.
B. Configure a storage DRS VM override.
C. Disable storage
D. RS for the VMs.
【单选题】
What is the VMware-recommended way to move a physical adapter out of Network I/O Control’s scope?___
A. Set the teaming policy to “Route Based on Physical NIC Load.”
B. Add the vmnic to the Net.NetNiocAllowOverCommit parameter in Advanced System Settings.
C. Add the vmnic to the Net.IOControlPnicOptOut parameter in Advanced System Settings.
D. Move the vmnic to a different vmUplink port on the Distributed Switch.
【单选题】
A VM folder contains VM1 and VM2. Group A has permission to power on virtual machines, defined on the VM folder and its children. Group B has permission to power off virtual machines, defined on the VM folder and its children. If a user is a member of Groups A and B, what will be the user’s effective permission on VM1 and VM2?___
A. Power on
B. Power off.
C. Power on and Power off.
D. Reset.
【单选题】
Group 1 is granted console interaction on a VM folder. User 1 is granted no console interaction on the same VM folder. What will be the outcome if User 1 tries to access the console of a virtual machine?___
A. User 1 will not be able to access the virtual machines in the VM folder.
B. User 1 will not have access to the virtual machine console.
C. User 1 will have access to the virtual machine console.
D. User 1 will have console access only via the vSphere Web Client.
【单选题】
Which statement is true regarding the use of VMFS3 datastores with vSphere 6.5?___
A. VMFS3 datastores can be used but not created.
B. VMFS3 datastores can be neither used nor created.
C. VMFS3 datastores will be present but unmounted.
D. VMFS3 datastores can be created and used.
【单选题】
In the Exhibit, each VM has a 1GHz non-expandable reservation. If all VMs are powered on in sequence, what would be the outcome?___
A. VM4 cannot be powered on.
B. VM5 cannot be powered on.
C. VM6 cannot be powered on.
D. VM3 cannot be powered on.
【单选题】
vSphere 6.5 introduced MAClearning capabilities for VMware’s virtual switches. What three benefits will it provide? (Choose three.)___
A. Reduced memory consumption.
B. Reduced consumption of extra CPU cycles.
C. Increased network throughput.
D. Prevent packet flooding inside the vSwitch.
【单选题】
What is the default pathing policy for most active-active arrays?___
A. Fixed
B. Most Recently Used
C. Dynamic
D. isk Morroring
【单选题】
Which command will show the iSCSI sessions on a ESXi 6.5 host?___
A. esxcli storage iscsi session get
B. esxcli iscsi session get
C. esxcli storage iscsi session
D. esxcli iscsi session list
【单选题】
Which of the following is not a parameter for traffic filtering or marking?___
A. virtual port ID
B. Protocol
C. Traffic Direction
D. DSCP value
E. Traffic redirection
【单选题】
A vSphere administrator wants to enable a virtual machine with Secure Boot, but in VM setting, Secure Boot option was not found under Boot Options. What could be the cause?___
A. The virtual hardware is not compatible.
B. The virtual machine has missing drivers.
C. The virtual machine OS does not support secure boot.
D. VMware Tools is not upgraded.
【单选题】
A virtual machine is connected on a distributed port group where the average bandwidth configured in the traffic shaping policy is 100 Mbps. The VM network adapter is configured with a reservation of 200 Mbps. What is the VM’s effective bandwidth?___
A. 200 Mbps
B. 100 Mbps
C. 150 Mbps
D. 400 Mbps
【多选题】
What are two reasons why a datastore in a Storage DRS cluster cannot enter maintenance mode?(Choose two.)___
A. Storage latency is too high to allow Storage DRS initiate Storage vMotion.
B. Storage DRS is configured for a VMFS3 datastore.
C. Storage
D. RS is disabled on the virtual disk.
【多选题】
What two methods are used to configure VMware vSphere Storage I/O Control shares and limits? (Choose two.)___
A. Assign shares and limits to VM virtual disks.
B. Assign shares and limits to datastores.
C. Assign shares and limits to Storage (DRS) clusters.
D. Assign shares and limits using VM storage policies.
【多选题】
ESXi 6.5 introduces VMFS6, which supports both 512e and 512n devices. What three configurations are supported when using these devices? (Choose three.) ___
A. Hosts with both 512e and 512n devices.
B. Storage vMotion between both 512e and 512n devices.
C. Datastore Extents spanned between both 512e and 512n devices.
D. Storage DRS clusters containing only both 512e and 512n devices.
【多选题】
A vSphere Administrator observes that the Primary VM configured with Fault Tolerance is executing slowly. After further investigation, it is determined that the Secondary VM is on an overcommitted ESXi host. What two methods will correct the problem? (Choose two.)___
A. Use Storage vMotion to migrate the Secondary VM to another datastore.
B. Use vMotion to migrate the Secondary VM to a different ESXi host.
C. Configure a CPU limit on the Primary VM which will also apply to the Secondary VM.
D. Turn off and turn on FT in order to recreate the Secondary VM on a different datastore.
【多选题】
Which two features require the use of Host Profiles? (Choose two.)___
A. Host Customizations
B. shared storage
C. Auto
D. eploy
【多选题】
What three processes on the vCenter Server Appliance (VCSA) does“vmware-watchdog monitor? (Choose three.) ___
A. vmware-eam
B. vmcad
C. vmware-vpostgres
D. vpxd
E. vsan-health
【多选题】
What three processes on the vCenter Server Appliance (VCSA) does“vmware-watchdog monitor? (Choose three.) ___
A. vmware-eam
B. vmcad
C. vmware-vpostgres
D. vpxd
E. vsan-health
【多选题】
Which two statements correctly describe VM-Host affinity rules? (Choose two.) ___
A. When there is more than one VM-Host affinity rule in a vSphere DRS cluster, the rules are applied equally.
B. After creating a VM-Host affinity rule, its ability to function in relation to other rules is predetermined.
C. When there is more than one VM-Host affinity rule in a vSphere
D. RS cluster, the rules will be ranked.
【多选题】
An administrator wants to enable proactive HA by moving virtual machines automatically if a hardware alert is triggered. What are the three required settings? (Choose three.)___
A. Set vSphere DRS Automation to Partially Automated.
B. Turn on Proactive HA.
C. Set the Proactive HA Automation Level to Manual.
D. Set the Proactive HA Automation Level to Automated.
E. Turn on vSphere HA and vSphere DRS.
【多选题】
If vCenter Server 5.5 installation has one or more services deployed remotely, which three services are relocated to vCenter Server 6.5 on upgrade? (Choose three.)___
A. vCenter Inventory Services
B. vSphere Authentication Proxy
C. vSphere Web Client
D. vSphere
E. SXi Dump Collector
【多选题】
What two debugging levels can a virtual machine be configured to? (Choose two.)___
A. Verbose
B. Debugging
C. Statistics
D. Trivia
【多选题】
What are three benefits of using a few large-capacity LUNs instead of many small-capacity LUNs? (Choose three.) ___
A. Better performance because there is less contention for a single volume.
B. More flexibility for resizing virtual disks.
C. Less wasted storage space.
D. More flexibility to create virtual machines without adding new LUNs.
E. Fewer VMFS datastores to manage.
【多选题】
Which two configurable options are available in Boot Options for a virtual machine? (Choose two.)___
A. Tools Upgrades
B. Encryption
C. Firmware
D. Force BIOS setup
【多选题】
Which three VMware-recommended best practices should an administrator follow before upgrading to vSphere 6.5? (Choose three.)___
A. Disconnect ESXi host from vCenter.
B. VMware Tools are installed in the virtual machine.
C. Ensure that the system hardware complies with ESXi requirements.
D. Back up the host.
E. Check the interoperability of any other software integrated with vSphere.
【多选题】
What are two requirements to enable EVC in vSphere DRS cluster? (Choose two.)___
A. CPUs must be from the same vendor.
B. EVC must use the lowest possible baseline supported by the hardware.
C. CPUs must be in the same family and of the same speed.
D. No VMs may be running in the cluster.
【多选题】
What three conditions could result in VMware Flash Read Cache being unable to claim a disk? (Choose three.)___
A. The disk is not listed in the VMware hardware compatibility guide.
B. The disk is not detected as an SSD.
C. The disk is not detected as local.
D. The disk is in use by VMFs.
【多选题】
Boot from SAN is supported on which three storage technologies? (Choose three.)___
A. VMware vSAN
B. FCoE
C. NFS 4.1
D. iSCSI
E. FC
【多选题】
Which two components are part of storage I/O multipathing on ESXi? (Choose two.)___
A. SATP
B. VASA
C. PSP
D. VAAI
【多选题】
Which two statements are true about Highly Available vSphere Auto Deploy infrastructure? (Choose two.)___
A. It helps prevent data loss.
B. It is a prerequisite for using vSphere Auto Deploy with stateful install.
C. It requires two or more Auto
D. eploy servers.
【多选题】
The virtual machine log rotation size can be changed for all VMs by which two interfaces? (Choose two.)___
A. PowerCLI
B. vSphere Web Client
C. ESXi host client
D. esxcli
【多选题】
Which two configuration options can exclude virtual disks from snapshot operations? (Choose two.)___
A. Use RDM in virtual mode for virtual disk.
B. Use virtual disks in Independent – Persistent mode.
C. Use a virtual disk larger than 2 TB in size.
D. Use RDM in physical mode for virtual disk.
【多选题】
Which two storage configurations on the source server are unsupported with VMware Converter? (Choose two.)___
A. Linux LVM
B. software RAID
C. GPT/MBR hybrid disks
D. Windows basic volumes
E. Windows dynamic volumes
推荐试题
【多选题】
BA11启动高压安注系统泵信号动作结果为：___
A. 启动JND10-40AP001
B. 关闭JND11-41AA101、102
C. 打开JND10-40AA801
D. 关闭JET53AA101-108。
【多选题】
BA11动作信号，热一环路热段温度大于150度___
A. 安全壳内压力大于0.129Mpa
B. 一回路压力对应的饱和温度与热段温差小于10度
C. CD13/Div.B
D. 手动触发
【多选题】
BB22:触发断开稳压器电机热器的信号有___
A. CD15
B. 一回路压力大于3.43Mpa，热段温度小于100
C. BA11
D. BA12
【多选题】
BB22:当一回路出现压力大于3.43MPa，热段温度小于100℃时，冷脆保护执行哪些操作___
A. 切除KBA20/30/51/52/53AP001
B. 断开稳压器电加热器
C. 无BA11信号下关闭JNG50-80AA101/102泵
D. 切除JDH10-40AP001
【多选题】
哪些保护触发后（非手动触发）必须等10分钟脉冲复位后才能复位？___
A. BA11；
B. BA12；
C. DC11；
D. DC12；
E. CA11
【多选题】
当BA13（转地坑运行）动作时，发出的命令有：___
A. 开启JNG10,20(30,40)AA803
B. 关闭循环阀JND12,22(32,42)AA101,102
C. 关闭JNG12,22(32,42)AA101
D. 关闭循环阀JNG13,23(33,43)AA101,102
【多选题】
以下属于热腿温度上升＞70℃引入的保护包括：___
A.
B. A21 (LPRZ＜-0.2m，启KBA50备用泵；LPRZ =0m，停泵） B. BA21 (LPRZ＜-0.8m，启KBA20(30)；LPRZ =-0.2m，停泵）
C. BA23（LPRZ＜-1.0m，关闭KBA10、40AA101,102）
D. AA15（LPRZ＜-1.0m，且△LSG＞0.3m或△F＞42kg/s，触发AA15）
【多选题】
下列关于BA21信号说法正确的是：___
A. 在T1k热（1v4）>70℃的前提下，稳压器窄量程液位－Lnom<0.0m或0.2m或0.8m或1.5m，发30s脉冲信号开启KBA60AA110，KBA69AA101；
B. 在T1k热（1v4）>70℃的前提下，稳压器窄量程液位－Lnom<-0.2m，启动备用的小流量上充泵；
C. 在T1k热（1v4）>70℃的前提下，稳压器窄量程液位－Lnom<-1m，启动一台大流量上充泵，同时开启阀门JNK11/41AA101,102 ， JNK23AA101，关闭阀门KBA10AA104，KBC10,11,12AA101；
D. 在T1k热（1v4）>70℃的前提下，稳压器窄量程液位－Lnom<-1.5m，启动第二台大流量上充泵KBA30//20AP001。
【多选题】
BA22动作结果是将JNK水箱的正常用户从安全系统隔离，触发信号如下___
A. ATWS（AA21）信号
B. LOCA（AA13）信号（包括稳压器低液位触发LOCA）
C. SGTR（CD15）信号
D. CD13信号（来自多样性A/B）
【多选题】
触发BB12的信号有___
A.
B. EA-BED母线电压<2.52KV，延时60秒； B. BBA-BBD母线电压<2.52KV，延时60秒；
C. BBA-BBD母线频率<47.4Hz，延时60秒；
D. BEA-BED母线频率<47.4Hz，延时60秒。
【多选题】
下列关于BB12信号描述正确的是___
A. 母线BEA-BED电压（4v4）<2.52KV，延时60秒；
B. 母线BEA-BED频率（4v4）<47.4Hz，延时60秒；
C. BB12保护动作时在后备盘上使用专用的钥匙复位；
D. BB12保护动作时的报警声音与AA17动作时不同；
【多选题】
下列保护可以手动触发_________
A. EP
B. APP
C. PP1
D. PP2
【多选题】
AC21的触发信号有_________
A. EP
B. ATWS
C. 所有主泵全停
D. 主泵运行环路的热腿温度小于274度
E. PP1信号长于5秒
【多选题】
机组功率>75%Nnom的情况下，以下信号中会触发APP保护动作的是_________
A. 发电机出口开关断开
B. 机组孤岛运行
C. 多于两个主汽门关闭
D. 主给水流量与反应堆功率严重不匹配
【多选题】
DC11中启动KAA系统的信号有_________
A. 一回路饱和温度与任一环路热段温度之差小于10℃
B. 安全壳内压力大于0.129MPa
C. 来自CA11命令
D. 来自CD15命令
【多选题】
造成正反应性误引入事故的初始事件有哪些_________
A. 硼酸浓度的误稀释
B. 控制棒组件的不可控上移
C. 控制棒组件从堆芯弹出
D. 主蒸汽快速隔离阀的误关闭
【多选题】
以下信号中，触发第一类预保护（PP1）动作的信号有_________
A. 中子通量变化周期小于20s
B. 一回路热段(1v4)温度高于323℃
C. 堆芯上部压力大于16.2MPa
D. 主蒸汽集管压力大于6.86MPa
【多选题】
以下信号中，触发第二类预保护（PP2）动作的信号有_________
A. 堆芯上部压力大于16.2MPa
B. 燃料棒线功率密度大于max1（max1＝PP1限值×0.98）
C. 偏离泡核沸腾裕度DNBR小于min1（min1＝1.35）
D. 单束控制棒落入堆芯
【多选题】
功率运行时一定引起跳堆的事件_________
A. 切除三台主泵
B. 控制棒驱动机构380V电源丧失，延时3秒
C. SGTR
D. 汽轮机停机
【多选题】
发生误稀释事故时，触发“反应堆紧急停堆”保护动作信号有_________
A. 反应堆周期<10s
B. 反应堆功率大于操纵员设定的功率限值
C. 反应堆功率大于根据反应堆冷却剂泵运行状态自动生成的功率限值
D. 最大线功率密度超过限值
【多选题】
控制棒意外落棒事故，可能触发“反应堆紧急停堆”保护动作信号有_________
A. 反应堆周期<10s
B. 反应堆功率>75%时，一回路压力小于14.7MPa
C. 一回路热段温度大于260℃时，没有cooldown时一回路压力<13.73MPa
D. 一回路热段温度大于328℃
【多选题】
发生SGTR启动JDH系统后，当满足下列条件之一，JDH泵停运___
A. P1k <7.5MPa（H＝0.5MPa）
B. JDH泵启动信号存在，但稳压器液位>9.4m（H＝0.1m）
C. SGTR信号消失后，操纵员手动复位
D. KAA泵停运
【多选题】
下列属于CE11“地震时系统隔离”动作的是：___
A. 关闭蒸汽发生器主给水
B. 关闭LBA10-40AA501,101,102
C. 关闭LCU正常供应，即关闭LCU02,03AA103,LCU00AA101
D. 关闭SGC02向非抗震厂房的供给
【多选题】
关于安全壳一级隔离的说法哪些是正确的：___
A. 安全壳内压力大于0.105MPa，信号消失后即可复位
B. 安全壳内放射性水平大于Max1，信号保持10min后可复位
C. 操纵员手动触发，可以立即复位
【多选题】
触发安全壳一级隔离的命令有：___
A. 安全壳内压力大于0.105MPa
B. 安全壳内放射性水平大于Max1
C. 安全壳内放射性水平大于Max2
D. 操纵员手动触发
【多选题】
SGTR后，在开启非事故蒸汽发生器大气释放阀信号消失的前提下，何时将其转为维持压力工况___
A. 一回路压力小于7.9Mpa
B. 手动
C. 蒸汽发生器压力低于4.9Mpa
D. 蒸汽发生器压力低于5.0Mpa
【多选题】
CD15保护动作的结果是___
A. 启动JDH泵对堆芯应急注硼
B. 发信号至DC11,DC12，启动KAA,PEB
C. 停运JEF电加热器
D. 关闭KBA60AA110和KBA69AA101
【多选题】
关于发生SGTR时蒸汽发生器的隔离的说法哪些是正确的___
A. 关闭所有蒸汽发生器的汽侧阀门LBA10、20、30、40AA501，101，102
B. 关闭事故蒸汽发生器的大气释放阀LBU10（20，30，40）201和前置隔离阀LBU10（20，30，40）AA101
C. 关闭事故蒸汽发生器排污阀门LCQ15（25，35，45）AA801、802；LCQ16（26，36，46）AA801、802
D. 关闭事故蒸汽发生器给水阀门LAB10（20，30，40）AA111、113、801
【多选题】
CB12安全壳二级隔离时，将安全壳隔离阀分成四组，分别为：___
A. 无延时关闭a组
B. 延时11秒关闭a组
C. 无延时关闭b组
D. 延时11秒关闭b组
【多选题】
CD15发生SGTR时强制降低一回路压力 功能完成准则为___
A. JDH至少两列运行
B. 向稳压器汽空间喷淋的JDH水流量不低于8Kg/S
C. 硼酸浓度不低于40g/l
D. 降低一回路压力到7.5兆帕
【多选题】
触发CD21(切除相应环路主泵)信号有___
A. 隔离故障蒸汽发生器水侧信号（CD12）
B. SGTR隔离信号（CD13）
C. 一回路热腿温度大于260℃时，误关闭主蒸汽快速隔离阀
D. 一回路热腿温度大于260℃时，单台SG液位低于正常液位0.5m，并且没有两台SG液位低于正常液位0.3m。
【多选题】
发生SGTR启动JDH系统后，JDH泵何时切除___
A. 一回路压力小于7.9MPa
B. SGTR信号消失后，操纵员手动复位
C. JDH泵启动信号存在，但稳压器液位超过9.4m
D. 一回路压力小于7.5MPa
【多选题】
当安全壳一级隔离CB11动作时，动作命令有___
A. 关闭KLD10AA801~804
B. 关闭KLD20AA801~804
C. 关闭KTF40AA801
D. 关闭KTF60AA801,802
【多选题】
下列属于CE11“地震时系统隔离”动作的是___
A. 关闭LBA10-40AA501,101,102
B. 关闭SG排污LCQ15,16AA801,802
C. 关闭一回路下泄阀门KBA11,12AA101,102
D. 关闭所有安全壳隔离阀
【多选题】
触发化学喷淋的信号有___
A. 安全壳内压力和放射性水平分别大于0.129MPa和Max2
B. 不是由于二回路导致的安全壳压力大于0.167MPa
C. 操纵员手动触发
【多选题】
复位化学喷淋的信号有___
A. 安全壳内压力小于0.09MPa
B. 触发化学喷淋信号25min后
C. 操纵员手动触发
【多选题】
CB12动作后，关于信号复位描述正确的包括___
A. 事故信号持续30min后，才能复位2a组
B. 事故触发信号消失后，才能复位2b组
C. 事故触发信号消失后，才能复位2a组
D. 事故信号持续30min后，才能复位2b组
【多选题】
启动BD11保护信号有（与门）___
A. 蒸汽发生器液位低于正常液位0.9m
B. 任一环路热段温度大于150
C. 没有隔离故障蒸汽发生器水侧信号CD12
D. 蒸汽发生器液位低于正常液位0.65m
【多选题】
事故情况下启动辅助给水泵，自动打开的阀门有___
A. LAB10-40AA111
B. LAH30AA101（高加后）
C. LAH31AA101（高加前）
D. LAB10-40AA113
【多选题】
下列蒸汽发生器液位相关逻辑正确的有：___
A. 当汽轮机主汽门打开，蒸汽发生器液位高于设定值 0.15 m，关闭蒸汽发生器液位调节阀门LAB10（20，30，40）AA211、212。
B. 当蒸汽发生器液位高于设定值 0.3 m，关闭液位调节阀门前的截止阀LAB10（20，30，40）AA111、113和隔离阀门LAB10(20,30,40)AA801。
C. 当蒸汽发生器的液位下降到比正常液位高 0.08m 时，重新打开液位调节阀门前的截止阀LAB10（20，30，40）AA111、113和隔离阀门LAB10（20，30，40）AA801。
D. 当一回路任意热段温度大于260℃时，蒸汽发生器液位高于正常液位 0.45m ;或者当出现任意停堆跳堆信号时，汽轮机保护跳闸。
