【单选题】
Bidirectional CHAP is support by which storage initiator?___
A. software FCoE HBA
B. Fibre Channel HBA
C. independent hardware iSCSI HBA
D. dependent hardware iSCSI HBA
查看试卷，进入试卷练习
微信扫一扫，开始刷题
相关试题
【单选题】
What is a pool of raw storage capacity that a storage system can provide to Virtual Volumes?___
A. protocol endpoint
B. storage container
C. storage provider
D. datastore
【单选题】
vSphere 6.5 DRS is now Network-Aware. Based on network utilization, when will DRS balance VMs?___
A. DRS will balance VMs when a network resource pool is configured for VMs.
B. DRS will balance VMs when Network I/O Control is enabled.
C. DRS will place VMs on initial boot for hosts that have network utilization lower that the threshold.
D. DRS will vMotion VMs when network utilization is higher than the threshold on a particular host.
【单选题】
A scripted upgrade of ESXi fails due to an incorrect parameter in the upgrade script. What file must the administrator modify to correct the problem?___
A. vmreconfig.pl
B. hostinfo.pl
C. ks.cfg
D. boot.cfg
【单选题】
A VM folder contains VM1 and VM2. Group A has permission to power on virtual machines, defined on the VM folder and its children. Group B has permission to power off virtual machine VM2. If a user is a member of group A and B, what action can the user perform?___
A. Suspend VM2.
B. Power off VM1.
C. Power on and power off VM1.
D. Power on and power off VM2.
【单选题】
The networking team has requested to have a dedicated network for iSCSI traffic. This task has been assigned to the vSphere Administrator. What is the VMware-recommended way to accomplish this?___
A. Configure Static Routes on each ESXi Server.
B. Configure the right subnet.
C. Create a custom IP Stack.
D. Define a dedicated gateway for the iSCSI vmkernel.
【单选题】
To prevent possible failures or issues during a vSphere upgrade, which component should be upgraded first?___
A. ESXi Hosts
B. virtual machines
C. datastores
D. vCenter Server
【单选题】
What is the command for updating an ESXi host?___
A. esxcli software vib update –d /vmfs/volumes/Datastore/DirectoryName/PatchName.zip
B. esxupdate software update –d”/vmfs/volumes/Datastore/DirectoryName/PatchName.zip”
C. esxcli software update –d “/vmfs/volumes/Datastore/DirectoryName/PatchName.zip”
D. esxupdate software vib update –d /vmfs/volumes/Datastore/DirectoryName/PatchName.zip
【单选题】
A vSphere Administrator would like to identify which physical NUMA node their virtual machine is currently residing on. What esxtop metric would provide this information?___
A. GST_ND[x]
B. OVD_ND[x]
C. NRMEM
D. NHN
【单选题】
How can a vSphere administrator ensure that two virtual machines never run on the same datastore in a datastore cluster, while permitting the VMs to be load-balanced?___
A. Use an Intra-VM Anti-Affinity Rule.
B. Configure a storage DRS VM override.
C. Disable storage
D. RS for the VMs.
【单选题】
What is the VMware-recommended way to move a physical adapter out of Network I/O Control’s scope?___
A. Set the teaming policy to “Route Based on Physical NIC Load.”
B. Add the vmnic to the Net.NetNiocAllowOverCommit parameter in Advanced System Settings.
C. Add the vmnic to the Net.IOControlPnicOptOut parameter in Advanced System Settings.
D. Move the vmnic to a different vmUplink port on the Distributed Switch.
【单选题】
A VM folder contains VM1 and VM2. Group A has permission to power on virtual machines, defined on the VM folder and its children. Group B has permission to power off virtual machines, defined on the VM folder and its children. If a user is a member of Groups A and B, what will be the user’s effective permission on VM1 and VM2?___
A. Power on
B. Power off.
C. Power on and Power off.
D. Reset.
【单选题】
Group 1 is granted console interaction on a VM folder. User 1 is granted no console interaction on the same VM folder. What will be the outcome if User 1 tries to access the console of a virtual machine?___
A. User 1 will not be able to access the virtual machines in the VM folder.
B. User 1 will not have access to the virtual machine console.
C. User 1 will have access to the virtual machine console.
D. User 1 will have console access only via the vSphere Web Client.
【单选题】
Which statement is true regarding the use of VMFS3 datastores with vSphere 6.5?___
A. VMFS3 datastores can be used but not created.
B. VMFS3 datastores can be neither used nor created.
C. VMFS3 datastores will be present but unmounted.
D. VMFS3 datastores can be created and used.
【单选题】
In the Exhibit, each VM has a 1GHz non-expandable reservation. If all VMs are powered on in sequence, what would be the outcome?___
A. VM4 cannot be powered on.
B. VM5 cannot be powered on.
C. VM6 cannot be powered on.
D. VM3 cannot be powered on.
【单选题】
vSphere 6.5 introduced MAClearning capabilities for VMware’s virtual switches. What three benefits will it provide? (Choose three.)___
A. Reduced memory consumption.
B. Reduced consumption of extra CPU cycles.
C. Increased network throughput.
D. Prevent packet flooding inside the vSwitch.
【单选题】
What is the default pathing policy for most active-active arrays?___
A. Fixed
B. Most Recently Used
C. Dynamic
D. isk Morroring
【单选题】
Which command will show the iSCSI sessions on a ESXi 6.5 host?___
A. esxcli storage iscsi session get
B. esxcli iscsi session get
C. esxcli storage iscsi session
D. esxcli iscsi session list
【单选题】
Which of the following is not a parameter for traffic filtering or marking?___
A. virtual port ID
B. Protocol
C. Traffic Direction
D. DSCP value
E. Traffic redirection
【单选题】
A vSphere administrator wants to enable a virtual machine with Secure Boot, but in VM setting, Secure Boot option was not found under Boot Options. What could be the cause?___
A. The virtual hardware is not compatible.
B. The virtual machine has missing drivers.
C. The virtual machine OS does not support secure boot.
D. VMware Tools is not upgraded.
【单选题】
A virtual machine is connected on a distributed port group where the average bandwidth configured in the traffic shaping policy is 100 Mbps. The VM network adapter is configured with a reservation of 200 Mbps. What is the VM’s effective bandwidth?___
A. 200 Mbps
B. 100 Mbps
C. 150 Mbps
D. 400 Mbps
【多选题】
What are two reasons why a datastore in a Storage DRS cluster cannot enter maintenance mode?(Choose two.)___
A. Storage latency is too high to allow Storage DRS initiate Storage vMotion.
B. Storage DRS is configured for a VMFS3 datastore.
C. Storage
D. RS is disabled on the virtual disk.
【多选题】
What two methods are used to configure VMware vSphere Storage I/O Control shares and limits? (Choose two.)___
A. Assign shares and limits to VM virtual disks.
B. Assign shares and limits to datastores.
C. Assign shares and limits to Storage (DRS) clusters.
D. Assign shares and limits using VM storage policies.
【多选题】
ESXi 6.5 introduces VMFS6, which supports both 512e and 512n devices. What three configurations are supported when using these devices? (Choose three.) ___
A. Hosts with both 512e and 512n devices.
B. Storage vMotion between both 512e and 512n devices.
C. Datastore Extents spanned between both 512e and 512n devices.
D. Storage DRS clusters containing only both 512e and 512n devices.
【多选题】
A vSphere Administrator observes that the Primary VM configured with Fault Tolerance is executing slowly. After further investigation, it is determined that the Secondary VM is on an overcommitted ESXi host. What two methods will correct the problem? (Choose two.)___
A. Use Storage vMotion to migrate the Secondary VM to another datastore.
B. Use vMotion to migrate the Secondary VM to a different ESXi host.
C. Configure a CPU limit on the Primary VM which will also apply to the Secondary VM.
D. Turn off and turn on FT in order to recreate the Secondary VM on a different datastore.
【多选题】
Which two features require the use of Host Profiles? (Choose two.)___
A. Host Customizations
B. shared storage
C. Auto
D. eploy
【多选题】
What three processes on the vCenter Server Appliance (VCSA) does“vmware-watchdog monitor? (Choose three.) ___
A. vmware-eam
B. vmcad
C. vmware-vpostgres
D. vpxd
E. vsan-health
【多选题】
What three processes on the vCenter Server Appliance (VCSA) does“vmware-watchdog monitor? (Choose three.) ___
A. vmware-eam
B. vmcad
C. vmware-vpostgres
D. vpxd
E. vsan-health
【多选题】
Which two statements correctly describe VM-Host affinity rules? (Choose two.) ___
A. When there is more than one VM-Host affinity rule in a vSphere DRS cluster, the rules are applied equally.
B. After creating a VM-Host affinity rule, its ability to function in relation to other rules is predetermined.
C. When there is more than one VM-Host affinity rule in a vSphere
D. RS cluster, the rules will be ranked.
【多选题】
An administrator wants to enable proactive HA by moving virtual machines automatically if a hardware alert is triggered. What are the three required settings? (Choose three.)___
A. Set vSphere DRS Automation to Partially Automated.
B. Turn on Proactive HA.
C. Set the Proactive HA Automation Level to Manual.
D. Set the Proactive HA Automation Level to Automated.
E. Turn on vSphere HA and vSphere DRS.
【多选题】
If vCenter Server 5.5 installation has one or more services deployed remotely, which three services are relocated to vCenter Server 6.5 on upgrade? (Choose three.)___
A. vCenter Inventory Services
B. vSphere Authentication Proxy
C. vSphere Web Client
D. vSphere
E. SXi Dump Collector
【多选题】
What two debugging levels can a virtual machine be configured to? (Choose two.)___
A. Verbose
B. Debugging
C. Statistics
D. Trivia
【多选题】
What are three benefits of using a few large-capacity LUNs instead of many small-capacity LUNs? (Choose three.) ___
A. Better performance because there is less contention for a single volume.
B. More flexibility for resizing virtual disks.
C. Less wasted storage space.
D. More flexibility to create virtual machines without adding new LUNs.
E. Fewer VMFS datastores to manage.
【多选题】
Which two configurable options are available in Boot Options for a virtual machine? (Choose two.)___
A. Tools Upgrades
B. Encryption
C. Firmware
D. Force BIOS setup
【多选题】
Which three VMware-recommended best practices should an administrator follow before upgrading to vSphere 6.5? (Choose three.)___
A. Disconnect ESXi host from vCenter.
B. VMware Tools are installed in the virtual machine.
C. Ensure that the system hardware complies with ESXi requirements.
D. Back up the host.
E. Check the interoperability of any other software integrated with vSphere.
【多选题】
What are two requirements to enable EVC in vSphere DRS cluster? (Choose two.)___
A. CPUs must be from the same vendor.
B. EVC must use the lowest possible baseline supported by the hardware.
C. CPUs must be in the same family and of the same speed.
D. No VMs may be running in the cluster.
【多选题】
What three conditions could result in VMware Flash Read Cache being unable to claim a disk? (Choose three.)___
A. The disk is not listed in the VMware hardware compatibility guide.
B. The disk is not detected as an SSD.
C. The disk is not detected as local.
D. The disk is in use by VMFs.
【多选题】
Boot from SAN is supported on which three storage technologies? (Choose three.)___
A. VMware vSAN
B. FCoE
C. NFS 4.1
D. iSCSI
E. FC
【多选题】
Which two components are part of storage I/O multipathing on ESXi? (Choose two.)___
A. SATP
B. VASA
C. PSP
D. VAAI
【多选题】
Which two statements are true about Highly Available vSphere Auto Deploy infrastructure? (Choose two.)___
A. It helps prevent data loss.
B. It is a prerequisite for using vSphere Auto Deploy with stateful install.
C. It requires two or more Auto
D. eploy servers.
【多选题】
The virtual machine log rotation size can be changed for all VMs by which two interfaces? (Choose two.)___
A. PowerCLI
B. vSphere Web Client
C. ESXi host client
D. esxcli
推荐试题
【判断题】
工件定位时，若夹具上的定位点不足六个，则肯定不会出现过定位。工件定位时，若夹具上的定位点不足六个，则肯定不会出现过定位。
【判断题】
定位基准需经加工，才能采用V形块定位。定位基准需经加工，才能采用V形块定位。
【判断题】
任何加工方法所得到的实际参数都不会绝对准确，从零件的功能来看，只要加工误差在零件图要求的误差范围之内，就认为保证了加工精度。任何加工方法所得到的实际参数都不会绝对准确，从零件的功能来看，只要加工误差在零件图要求的误差范围之内，就认为保证了加工精度。
【判断题】
模锻是在将加热到锻造温度的金属坯料放到固定在模锻设备上的锻模模具生产锻件的方法。模锻是在将加热到锻造温度的金属坯料放到固定在模锻设备上的锻模模具生产锻件的方法。
【判断题】
车削加工是在车床上利用工件相对于刀具旋转而对工件进行切削加工的方法。车削加工是在车床上利用工件相对于刀具旋转而对工件进行切削加工的方法。
【判断题】
工件上经刀具切削后形成的表面是过渡表面。工件上经刀具切削后形成的表面是过渡表面。
【判断题】
特种加工是指那些不属于传动加工工艺范畴的加工工艺方法。特种加工是指那些不属于传动加工工艺范畴的加工工艺方法。
【判断题】
工艺规程是规定产品或零部件制造工艺过程和操作方法等的工艺文件。工艺规程是规定产品或零部件制造工艺过程和操作方法等的工艺文件。
【判断题】
在制定零件的加工工艺规程时可以略过零件的工艺分析。在制定零件的加工工艺规程时可以略过零件的工艺分析。
【判断题】
刨削是以刨刀相对工件的往复直线运动与工作台的连续进给来实现切削加工的。刨削是以刨刀相对工件的往复直线运动与工作台的连续进给来实现切削加工的。
【判断题】
在粗加工的条件下，一般都会采用效率优先原则。在粗加工的条件下，一般都会采用效率优先原则。
【判断题】
轴类零件加工顺序安排大体如下：准备毛坯—正火—粗车—半精车—磨内圆。轴类零件加工顺序安排大体如下：准备毛坯—正火—粗车—半精车—磨内圆。
【判断题】
前角是在基面内测量的。前角是在基面内测量的。
【判断题】
工件在夹紧后不能动了，就表示工件定位正确。工件在夹紧后不能动了，就表示工件定位正确。
【判断题】
加工细长轴一般采用一夹一顶的装夹方法。加工细长轴一般采用一夹一顶的装夹方法。
【判断题】
常用刀具材料的种类有碳素工具钢、合金工具钢、高速钢、硬质合金钢。常用刀具材料的种类有碳素工具钢、合金工具钢、高速钢、硬质合金钢。
【判断题】
铸造主要用于形状复杂或大型构件的连接成形，异种材料间的连接，零件的修补等。铸造主要用于形状复杂或大型构件的连接成形，异种材料间的连接，零件的修补等。
【判断题】
碳钢质量的高低，主要根据钢中有害杂质硫和磷的含量多少来划分的。碳钢质量的高低，主要根据钢中有害杂质硫和磷的含量多少来划分的。
【判断题】
零件的表面粗糙度值越小，越易加工。零件的表面粗糙度值越小，越易加工。
【判断题】
车床的主运动是刀具的直线运动。车床的主运动是刀具的直线运动。
【判断题】
自动定心夹紧机构能使工件同时得到定心和夹紧。自动定心夹紧机构能使工件同时得到定心和夹紧。
【判断题】
实际应用中有时利用定位干涉很小的过定位提高定位的稳定性。实际应用中有时利用定位干涉很小的过定位提高定位的稳定性。
【判断题】
冷作硬化可提高零件的耐磨性和疲劳强度。冷作硬化可提高零件的耐磨性和疲劳强度。
【判断题】
装配精度包括相互位置精度、相对运动精度和相互配合精度。装配精度包括相互位置精度、相对运动精度和相互配合精度。
【判断题】
工件通过机床夹具进行安装，包含了定位和夹紧两层含义。工件通过机床夹具进行安装，包含了定位和夹紧两层含义。
【判断题】
在制定零件的加工工艺规程时可以略过零件的工艺分析。在制定零件的加工工艺规程时可以略过零件的工艺分析。
【判断题】
精加工零件应用工位器具存放，使加工面隔开，以防止相互磕碰而损伤表面。精加工表面完工后，应适当涂油以防锈蚀。精加工零件应用工位器具存放，使加工面隔开，以防止相互磕碰而损伤表面。精加工表面完工后，应适当涂油以防锈蚀。
【判断题】
数控加工技术是机械制造技术的一个分支。数控加工技术是机械制造技术的一个分支。
【判断题】
《机械制造技术》课程是国内各类高校本科机械类专业教学的传统且重要的专业技术基础课程之一。《机械制造技术》课程是国内各类高校本科机械类专业教学的传统且重要的专业技术基础课程之一。
【判断题】
零件的某个方向可能会有两个或两个以上的基准。一般只有一个是主要基准，其它为次要基准，或称辅助基准。零件的某个方向可能会有两个或两个以上的基准。一般只有一个是主要基准，其它为次要基准，或称辅助基准。
【判断题】
工件加工时单面受热变形产生的加工误差要比均匀受热变形产生的加工误差更小。工件加工时单面受热变形产生的加工误差要比均匀受热变形产生的加工误差更小。
【判断题】
一般情况下，零件批量的大小对夹具设计方案有较大的影响。批量大时，应考虑采用方便、快捷的夹具方案。一般情况下，零件批量的大小对夹具设计方案有较大的影响。批量大时，应考虑采用方便、快捷的夹具方案。
【判断题】
工件定位的任务首先是夹紧。工件定位的任务首先是夹紧。
【判断题】
切削过程主要是指被切削材料受挤压、变形和剥离的过程。切削过程主要是指被切削材料受挤压、变形和剥离的过程。
【判断题】
刀具主偏角减小（锐角）会增加径向切削分力。刀具主偏角减小（锐角）会增加径向切削分力。
【判断题】
工艺过程是指生产过程中直接改变生产对象的形状、尺寸、相对位置和性质，使其成为成品或半成品的过程。工艺过程是指生产过程中直接改变生产对象的形状、尺寸、相对位置和性质，使其成为成品或半成品的过程。
【判断题】
用压板压紧工件时，垫块的高度应稍低于工件。用压板压紧工件时，垫块的高度应稍低于工件。
【判断题】
在机器装配或零件加工过程中，由互相连接的尺寸形成的封闭尺寸组称为尺寸链。在机器装配或零件加工过程中，由互相连接的尺寸形成的封闭尺寸组称为尺寸链。
【判断题】
锻造主要用于受力较大、承受重载、冲击载荷、交变载荷的重要的机械零件或毛坯。锻造主要用于受力较大、承受重载、冲击载荷、交变载荷的重要的机械零件或毛坯。
【判断题】
定位误差属于随机性误差。定位误差属于随机性误差。
