【单选题】
What configuration option would ensure that a virtual NUMA topology is defined on VMs having more than eight virtual CPUs?___
A. cupid.coresPerSocket
B. numa.vcpu.followcorespersocket
C. numa.vcpu.maxPerVirtualNode
D. numa.vcpu.min
查看试卷，进入试卷练习
微信扫一扫，开始刷题
相关试题
【单选题】
What is the minimum disk space required to deploy vSphere Data Protection (VDP) with 8 TB configuration?___
A. 4 TB
B. 16 TB
C. 8 TB
D. 12 TB
【单选题】
What advanced option for vSphere HA defines a maximum number of reset attempts by VMCP for a virtual machine?___
A. das.maxterminates
B. das.isolationshutdowntimeout
C. das.maxresets
D. fdm.isolationpolicydelaysec
【单选题】
What vSphere technology enables the administrator to ensure consistent configuration at scale?___
A. PowerCLI
B. Host Profiles
C. esxcli
D. vSphere Web Client
【单选题】
Which port is used for vSphere HA agent-to-agent communication?___
A. 443
B. 8182
C. 22
D. 902
【单选题】
Which log file would assist in identifying an issue that occurred during the database export phase of a vCenter Server upgrade process?___
A. vcdb_import.out
B. export.json
C. export-upgrade-runner.log
D. vcdb_export.out
【单选题】
Bidirectional CHAP is support by which storage initiator?___
A. software FCoE HBA
B. Fibre Channel HBA
C. independent hardware iSCSI HBA
D. dependent hardware iSCSI HBA
【单选题】
What is a pool of raw storage capacity that a storage system can provide to Virtual Volumes?___
A. protocol endpoint
B. storage container
C. storage provider
D. datastore
【单选题】
vSphere 6.5 DRS is now Network-Aware. Based on network utilization, when will DRS balance VMs?___
A. DRS will balance VMs when a network resource pool is configured for VMs.
B. DRS will balance VMs when Network I/O Control is enabled.
C. DRS will place VMs on initial boot for hosts that have network utilization lower that the threshold.
D. DRS will vMotion VMs when network utilization is higher than the threshold on a particular host.
【单选题】
A scripted upgrade of ESXi fails due to an incorrect parameter in the upgrade script. What file must the administrator modify to correct the problem?___
A. vmreconfig.pl
B. hostinfo.pl
C. ks.cfg
D. boot.cfg
【单选题】
A VM folder contains VM1 and VM2. Group A has permission to power on virtual machines, defined on the VM folder and its children. Group B has permission to power off virtual machine VM2. If a user is a member of group A and B, what action can the user perform?___
A. Suspend VM2.
B. Power off VM1.
C. Power on and power off VM1.
D. Power on and power off VM2.
【单选题】
The networking team has requested to have a dedicated network for iSCSI traffic. This task has been assigned to the vSphere Administrator. What is the VMware-recommended way to accomplish this?___
A. Configure Static Routes on each ESXi Server.
B. Configure the right subnet.
C. Create a custom IP Stack.
D. Define a dedicated gateway for the iSCSI vmkernel.
【单选题】
To prevent possible failures or issues during a vSphere upgrade, which component should be upgraded first?___
A. ESXi Hosts
B. virtual machines
C. datastores
D. vCenter Server
【单选题】
What is the command for updating an ESXi host?___
A. esxcli software vib update –d /vmfs/volumes/Datastore/DirectoryName/PatchName.zip
B. esxupdate software update –d”/vmfs/volumes/Datastore/DirectoryName/PatchName.zip”
C. esxcli software update –d “/vmfs/volumes/Datastore/DirectoryName/PatchName.zip”
D. esxupdate software vib update –d /vmfs/volumes/Datastore/DirectoryName/PatchName.zip
【单选题】
A vSphere Administrator would like to identify which physical NUMA node their virtual machine is currently residing on. What esxtop metric would provide this information?___
A. GST_ND[x]
B. OVD_ND[x]
C. NRMEM
D. NHN
【单选题】
How can a vSphere administrator ensure that two virtual machines never run on the same datastore in a datastore cluster, while permitting the VMs to be load-balanced?___
A. Use an Intra-VM Anti-Affinity Rule.
B. Configure a storage DRS VM override.
C. Disable storage
D. RS for the VMs.
【单选题】
What is the VMware-recommended way to move a physical adapter out of Network I/O Control’s scope?___
A. Set the teaming policy to “Route Based on Physical NIC Load.”
B. Add the vmnic to the Net.NetNiocAllowOverCommit parameter in Advanced System Settings.
C. Add the vmnic to the Net.IOControlPnicOptOut parameter in Advanced System Settings.
D. Move the vmnic to a different vmUplink port on the Distributed Switch.
【单选题】
A VM folder contains VM1 and VM2. Group A has permission to power on virtual machines, defined on the VM folder and its children. Group B has permission to power off virtual machines, defined on the VM folder and its children. If a user is a member of Groups A and B, what will be the user’s effective permission on VM1 and VM2?___
A. Power on
B. Power off.
C. Power on and Power off.
D. Reset.
【单选题】
Group 1 is granted console interaction on a VM folder. User 1 is granted no console interaction on the same VM folder. What will be the outcome if User 1 tries to access the console of a virtual machine?___
A. User 1 will not be able to access the virtual machines in the VM folder.
B. User 1 will not have access to the virtual machine console.
C. User 1 will have access to the virtual machine console.
D. User 1 will have console access only via the vSphere Web Client.
【单选题】
Which statement is true regarding the use of VMFS3 datastores with vSphere 6.5?___
A. VMFS3 datastores can be used but not created.
B. VMFS3 datastores can be neither used nor created.
C. VMFS3 datastores will be present but unmounted.
D. VMFS3 datastores can be created and used.
【单选题】
In the Exhibit, each VM has a 1GHz non-expandable reservation. If all VMs are powered on in sequence, what would be the outcome?___
A. VM4 cannot be powered on.
B. VM5 cannot be powered on.
C. VM6 cannot be powered on.
D. VM3 cannot be powered on.
【单选题】
vSphere 6.5 introduced MAClearning capabilities for VMware’s virtual switches. What three benefits will it provide? (Choose three.)___
A. Reduced memory consumption.
B. Reduced consumption of extra CPU cycles.
C. Increased network throughput.
D. Prevent packet flooding inside the vSwitch.
【单选题】
What is the default pathing policy for most active-active arrays?___
A. Fixed
B. Most Recently Used
C. Dynamic
D. isk Morroring
【单选题】
Which command will show the iSCSI sessions on a ESXi 6.5 host?___
A. esxcli storage iscsi session get
B. esxcli iscsi session get
C. esxcli storage iscsi session
D. esxcli iscsi session list
【单选题】
Which of the following is not a parameter for traffic filtering or marking?___
A. virtual port ID
B. Protocol
C. Traffic Direction
D. DSCP value
E. Traffic redirection
【单选题】
A vSphere administrator wants to enable a virtual machine with Secure Boot, but in VM setting, Secure Boot option was not found under Boot Options. What could be the cause?___
A. The virtual hardware is not compatible.
B. The virtual machine has missing drivers.
C. The virtual machine OS does not support secure boot.
D. VMware Tools is not upgraded.
【单选题】
A virtual machine is connected on a distributed port group where the average bandwidth configured in the traffic shaping policy is 100 Mbps. The VM network adapter is configured with a reservation of 200 Mbps. What is the VM’s effective bandwidth?___
A. 200 Mbps
B. 100 Mbps
C. 150 Mbps
D. 400 Mbps
【多选题】
What are two reasons why a datastore in a Storage DRS cluster cannot enter maintenance mode?(Choose two.)___
A. Storage latency is too high to allow Storage DRS initiate Storage vMotion.
B. Storage DRS is configured for a VMFS3 datastore.
C. Storage
D. RS is disabled on the virtual disk.
【多选题】
What two methods are used to configure VMware vSphere Storage I/O Control shares and limits? (Choose two.)___
A. Assign shares and limits to VM virtual disks.
B. Assign shares and limits to datastores.
C. Assign shares and limits to Storage (DRS) clusters.
D. Assign shares and limits using VM storage policies.
【多选题】
ESXi 6.5 introduces VMFS6, which supports both 512e and 512n devices. What three configurations are supported when using these devices? (Choose three.) ___
A. Hosts with both 512e and 512n devices.
B. Storage vMotion between both 512e and 512n devices.
C. Datastore Extents spanned between both 512e and 512n devices.
D. Storage DRS clusters containing only both 512e and 512n devices.
【多选题】
A vSphere Administrator observes that the Primary VM configured with Fault Tolerance is executing slowly. After further investigation, it is determined that the Secondary VM is on an overcommitted ESXi host. What two methods will correct the problem? (Choose two.)___
A. Use Storage vMotion to migrate the Secondary VM to another datastore.
B. Use vMotion to migrate the Secondary VM to a different ESXi host.
C. Configure a CPU limit on the Primary VM which will also apply to the Secondary VM.
D. Turn off and turn on FT in order to recreate the Secondary VM on a different datastore.
【多选题】
Which two features require the use of Host Profiles? (Choose two.)___
A. Host Customizations
B. shared storage
C. Auto
D. eploy
【多选题】
What three processes on the vCenter Server Appliance (VCSA) does“vmware-watchdog monitor? (Choose three.) ___
A. vmware-eam
B. vmcad
C. vmware-vpostgres
D. vpxd
E. vsan-health
【多选题】
What three processes on the vCenter Server Appliance (VCSA) does“vmware-watchdog monitor? (Choose three.) ___
A. vmware-eam
B. vmcad
C. vmware-vpostgres
D. vpxd
E. vsan-health
【多选题】
Which two statements correctly describe VM-Host affinity rules? (Choose two.) ___
A. When there is more than one VM-Host affinity rule in a vSphere DRS cluster, the rules are applied equally.
B. After creating a VM-Host affinity rule, its ability to function in relation to other rules is predetermined.
C. When there is more than one VM-Host affinity rule in a vSphere
D. RS cluster, the rules will be ranked.
【多选题】
An administrator wants to enable proactive HA by moving virtual machines automatically if a hardware alert is triggered. What are the three required settings? (Choose three.)___
A. Set vSphere DRS Automation to Partially Automated.
B. Turn on Proactive HA.
C. Set the Proactive HA Automation Level to Manual.
D. Set the Proactive HA Automation Level to Automated.
E. Turn on vSphere HA and vSphere DRS.
【多选题】
If vCenter Server 5.5 installation has one or more services deployed remotely, which three services are relocated to vCenter Server 6.5 on upgrade? (Choose three.)___
A. vCenter Inventory Services
B. vSphere Authentication Proxy
C. vSphere Web Client
D. vSphere
E. SXi Dump Collector
【多选题】
What two debugging levels can a virtual machine be configured to? (Choose two.)___
A. Verbose
B. Debugging
C. Statistics
D. Trivia
【多选题】
What are three benefits of using a few large-capacity LUNs instead of many small-capacity LUNs? (Choose three.) ___
A. Better performance because there is less contention for a single volume.
B. More flexibility for resizing virtual disks.
C. Less wasted storage space.
D. More flexibility to create virtual machines without adding new LUNs.
E. Fewer VMFS datastores to manage.
【多选题】
Which two configurable options are available in Boot Options for a virtual machine? (Choose two.)___
A. Tools Upgrades
B. Encryption
C. Firmware
D. Force BIOS setup
【多选题】
Which three VMware-recommended best practices should an administrator follow before upgrading to vSphere 6.5? (Choose three.)___
A. Disconnect ESXi host from vCenter.
B. VMware Tools are installed in the virtual machine.
C. Ensure that the system hardware complies with ESXi requirements.
D. Back up the host.
E. Check the interoperability of any other software integrated with vSphere.
推荐试题
【单选题】
6502电气集中ZQJ不能励磁的故障现象_______。[322020201]___
A. 办理取消进路手续时，总取消表示灯不亮，信号可以取消。
B. 总取消和总人解按钮表示灯均不亮。
C. 办理取消进路手续时，总取消表示灯不亮，且信号不能取消。
D. 总取消和总人解按钮表示灯均亮。
【单选题】
6502电气集中ZRJ不能励磁的故障现象_______。[322020201]___
A. 办理取消进路手续时，总取消表示灯不亮，信号可以取消。
B. 总取消和总人解按钮表示灯均不亮。
C. 办理取消进路手续时，总取消表示灯不亮，且信号不能取消。
D. 总取消和总人解按钮表示灯均亮。
【单选题】
6502电气集中控制台引来的各种电源线以及从组合架引来的接通道岔表示电源线,都先连到就近的K1段控制台零层4柱端子板上,其中_______电源,考虑到电流较大,还需经过汇流排端子转接。[331030203]___
A. KZ、KF、JZ三种电源
B. KZ、KF、DZ三种电源
C. KZ、KF两种电源
D. KZ、KF、JF三种电源
【单选题】
6502电气集中组合架六列侧面端子的用途,原则上规定:除定型网络线以外,组合与组合之间的联系用_______。[322030203]___
A. 01与02
B. 02与03
C. 03与04
D. 06
【单选题】
6502电气集中，执行组电路中，_______吸起，将XJJ接上第8线。[322020201]___
A. KJ
B. FKJ
C. JXJ
D. JYJ
【单选题】
6502电气集中，执行组电路中，第8线检查的基本联锁条件是_______。[333020201]___
A. 道岔位置正确，进路空闲。
B. 道岔位置正确，敌对进路未建立。
C. 进路空闲，敌对进路未建立，信号正常。
D. 道岔位置正确，进路空闲，敌对进路未建立。
【单选题】
在控制台上区分7，8，9线故障时，可在控制台上增加办理引导进路锁闭操作，则可根据原来办理的进路，判断出故障所处位置，例如：若原来办理的是接车进路，办理引导锁闭后进路无白光带，说明_______。[333020201]___
A. 9线的QJJ和GJJ故障
B. 7线的KJ故障
C. 8线的XJJ故障
D. 9线的GJJ故障
【单选题】
控制台零层一块定型配线的端子板，可供_______使用，使用后的空余端子也不再另作它用。[321030203]___
A. 一组单动道岔
B. 一架信号机
C. 一组单动道岔和一架信号机
D. 一组单动道岔和一组双动道岔
【单选题】
控制台零层，定型配线中，一组双动道岔使用_______端子板。[321030203]___
【单选题】
列车开始继电器电路中，_______复原，断开LKJ励磁电路。[321020201]___
A. AJ
B. KJ
C. 方向继电器
D. FKJ
【单选题】
列车开始继电器电路中，信号开放后，_______复原，断开LKJ的第一条自闭电路。[321020201]___
A. AJ
B. KJ
C. 方向继电器
D. FKJ
【单选题】
列车开始继电器电路中，当进路内方第一道岔区段解锁后，_______复原，断开LKJ第二条自闭电路。[321020201]___
A. AJ
B. KJ
C. 方向继电器
D. FKJ
【单选题】
组合架零层配线中，每个组合架零层能安放_______端子板。[321030203]___
A. 11块
B. 12块
C. 13块
D. 14块
【单选题】
组合架零层配线中，从组合架正面看，从左向右顺序编号，_______为电源端子板。[322030203]___
A. 01～03
B. 04～06
C. 07～08
D. 09～013
【单选题】
组合架零层配线中，从组合架正面看，从左向右顺序编号，_______为熔断器端子板。[322030203]___
A. 01～03
B. 04～06
C. 07～08
D. 09～013
【单选题】
组合架零层配线中，从组合架正面看，从左向右顺序编号，_______为供条件电源用的18柱端子板。[322030203]___
A. 01～03
B. 04～06
C. 07～08
D. 09～013
【单选题】
下列不属于故障-安全的方法是_______。[322030203]___
A. 安全对应法
B. 双断保护法
C. 独立电源法
D. 提高电源电压法
【单选题】
辅助开始继电器电路中，排列列车进路时，_______吸起使FKJ励磁并自闭。[321020201]___
A. LKJ
B. KJ
C. JXJ
D. XJJ
【单选题】
辅助开始继电器电路中，排列调车进路时，始端_______吸起后使FKJ励磁并自闭。[322020201]___
A. LKJ
B. KJ
C. JXJ
D. XJJ
【单选题】
辅助开始继电器电路中，重新开放信号时，按压_______按钮，使FKJ励磁并自闭。[323020201]___
A. 始端
B. 终端
C. 列车按钮
D. 调车按钮
【单选题】
辅助开始继电器电路中，FKJ不能励磁的故障现象是_______。[322020201]___
A. 始端按钮闪光后熄灭，不能点亮稳定灯光，进路不锁闭
B. 始端一直闪光，不能点亮稳定灯光，进路不锁闭
C. 始端先点稳定灯光(终端灭灯)，接着始端稳光自动熄灭
D. 始端按钮点稳定灯光，终端按钮灭灯，进路无白光带
【单选题】
辅助开始继电器电路中，在有道岔转换时，FKJ不能自闭的故障现象是_______。[332020201]___
A. 始端按钮闪光后熄灭，不能点亮稳定灯光，进路不锁闭
B. 始端一直闪光，不能点亮稳定灯光，进路不锁闭
C. 始端先点稳定灯光(终端灭灯)，接着始端稳光自动熄灭
D. 始端按钮点稳定灯光，终端按钮灭灯，进路无白光带
【单选题】
开始继电器电路中，进路无道岔转换时，利用始端_______后接点，FKJ的前接点接通KJ励磁电路。[321020201]___
A. LKJ
B. KJ
C. JXJ
D. XJJ
【单选题】
股道检查继电器电路中，GJJ平时处于_______状态。[331020201]___
【单选题】
6502电气集中，组合架零层XJZ，XJF熔断器熔断，则_______。[322020201]___
A. 有一架及以上信号复示器闪光
B. 只有一架信号复示器闪光
C. 全站信号不能开放
D. 一个咽喉的信号灭灯
【单选题】
6502电气集中，组合架零层DJZ，DJF熔断器熔断，则_______。[322020201]___
A. 有一组道岔无表示，且有挤岔报警
B. 有一组及以上道岔无表示，且有挤岔报警
C. 全站道岔不能操纵
D. 有一组及以上道岔不能操纵
【单选题】
6502电气集中，组合架零层DZ，DF熔断器熔断，则_______。[323020201]___
A. 有一组道岔无表示，且有挤岔报警
B. 有一组及以上道岔无表示，且有挤岔报警
C. 全站道岔不能操纵
D. 有一组及以上道岔不能操纵
【单选题】
凡是进路的始端,均设一个取消继电器,QJ在_______组合内。[321030203]___
A. 只在LXZ
B. 只在DX
C. 在DX或LXZ
D. 在LXZ或Q
【单选题】
只有一个离去区段空闲,出站信号机点亮黄灯时_______。[322020201]___
A. LXJ↓、DXJ↓、DJ↑
B. LXJ↑、DXJ↑、DJ↓
C. LXJ↑、ZXJ↑、2LQJ↓、DJ↑
D. LXJ↓、DXJ↑、DJ↑
【单选题】
照查继电器电路中,ZCJ设置在_______。[321020201]___
A. 只设置在1LXF中
B. 只设置在2LXF中
C. 设置在1LXF或2LXF中
D. 设置在LXZ或1LXZ或2LXF中
【单选题】
只有_______的按钮才能兼作相反方向的调车进路的变通按钮。[323010201]___
A. 单置调车信号机
B. 并置调车信号机
C. 差置调车信号机
D. 通过信号机
【单选题】
只有在变通进路上没有调车按钮可兼作变通按钮的情况下，才特设一个_______。[321010201]___
A. 变通按钮
B. 单置调车按钮
C. 并置调车按钮
D. 差置调车按钮
【单选题】
方向电源，例如“KZ-共用-H”是通过四个方向继电器后接点和_______后接点接通的正极性电源。[321020201]___
A. ZQJ
B. ZRJ
C. 1RJJ
D. 2RJJ
【单选题】
有两个离去区段都空闲,出站信号机点亮绿灯时_______。[322020201]___
A. LXJ↓、DXJ↓、DJ↑
B. LXJ↑、DXJ↑、DJ↓
C. LXJ↑、ZXJ↑、2LQJ↑、DJ↑
D. LXJ↓、DXJ↑、DJ↑
【单选题】
在KJ3-4线圈的电路中，通过一个_______第七组接点接入负极性电源。[322020201]___
A. JXJ
B. XJJ
C. JYJ
D. ZJ
【单选题】
6502电气集中，_______是选择究竟哪一个区段可以锁闭和为解锁做准备的。[323020201]___
A. FKJ
B. QJJ
C. 进路继电器
D. SJ
【单选题】
6502电气集中，_______是专门检验解锁条件的。[322020201]___
A. FKJ
B. QJJ
C. 进路继电器
D. SJ
【单选题】
6502电气集中，_______是反映进路在锁闭状态或解锁状态用的。[333020201]___
A. FKJ
B. QJJ
C. 进路继电器
D. SJ
【单选题】
在整个网络中，对每条具体进路的电路来说，进路的区分用_______接点确定。[321020201]___
A. DBJ或FBJ
B. DCJ或FCJ
C. 1LJ或2LJ
D. DBJ
【单选题】
当道岔在转换或发生挤岔故障，停电或断线等故障时，必须保证DBJ和FBJ落下，因此必须使用_______。[332010204]___
A. 安全型继电器
B. 有极型继电器
C. 电码型继电器
D. 非安全型继电器
