【多选题】
Which two attack types can be prevented with the impleme ntation of a Cisco IPS solution？___
A. DDos
B. man-in-the-middle
C. worms
D. ARP spoofing
E. VLAN hopping
查看试卷，进入试卷练习
微信扫一扫，开始刷题
相关试题
【多选题】
choose four___
A. DHCP snooping ——————————blocks DHCP messages
B. Dynamic ARP inspection——————verifies IP-to-MAC traffic on untrusted ports
C. IP sources guard ——————————provides layer 2 interface security with ports ACLs
D. Port security————————————mitigates MAC-address spoofing at the access interface
【多选题】
choose four___
A. Step1————————run the system setup wizard
B. Step2————————add an authentication realm
C. Step3————————configure identity management
D. Step4————————configure directory group
【多选题】
What are two advanced features of the Cisco AMp solution for endpoints ___
A. contemplation
B. foresight
C. sandboxing
D. reputation
E. reflection
【多选题】
Which two characteristics of RADIUS are true？___
A. It encrypts only the password between user and server.
B. It uses TCP ports 1812/1813
C. It uses UDP ports 1812/1813.
D. It uses UDP port 49
E. It uses TCP port 49
【多选题】
What are two challenges of using a network-based IPS？ ___
A. It is unable to determine whether a detected attack was successful
B. It requires additional storage and proce ssor capacity on syslog servers
C. As the network expands， it requires you to add more sensors.
D. It is unable to detect attacks across the entire network
E. It must support multiple operating systems.
【多选题】
What are two default be haviors of the traffic on a zone-based firewall？___
A. Traffic within the self -zone uses an im plicit deny all.
B. All traffic between zones is implicitly blocked
C. Communication is allowed between interfadAss that are members of the same zone
D. Communication is blocked between interfaces that are members of the same zone
E. The CBAC rules that are configured on router interfaces apply to zone interfaces
【多选题】
Which two advantages does the on-premise model for MDM deployment have over the cloud-based model？___
A. The on-premise model is easier and faster to de ploy than the cloud-based model
B. The on-premise model is more scalable than the cloud-based model
C. The on-premise model is generally less expensive than the cloud-based model
D. The on-premise model generally has less latency than the cloud- based model.
E. The on-premise model provides more control of the MDM solution than the cloud
【多选题】
Which two actions can an end usts take to manage a lost or stolen device in Cisco ISE？ ___
A. Activate Cisco ISE End point Protection Services to quarantine the device.
B. Add the mac address of the device to a list of blacklisted devices
C. Force the device to be locked with a PIN
D. Request revocation of the digital certificate of the device.
E. Reinstate a device that the user previously marked as lost or stolen
【多选题】
Which two problems can arise when a proxy firewall serves as the gateway between networks？___
A. It can prevent content caching
B. It can limit application support
C. It is unable to prevent direct connections to other networks
D. It can cause reduced throughput.
E. It is unable to provide antivirus protection
【多选题】
When using the Adaptive Security Device Manager（ASDM）， which two methods are available to add a new root certificate？___
A. Use sCep
B. Install from SFTP server
C. Install from a file
D. Use Https
E. Use LDAP
【多选题】
Which two are considered basic security principles？___
A. Accountability
B. Redundancy
C. High Availabilit
D. Integrity
E. Confidentiality
【多选题】
Which two roles of the Cisco WSA are true？___
A. IPS
B. firewall
C. antispam
D. web proxy
E. URL filter
【单选题】
Which next-generation encryption algorithm supports four variants？___
A. SHA-2
B. SHA-1
C. MD5
D. HMAC
【单选题】
What aims to remove the abil ity to deny an action？___
A. Non-Repudiation
B. Accountability
C. Integrity
D. Deniability
【单选题】
Which statements about the native VLAN is true ？___
A. It is susceptible to VLAN hopping attacks.
B. It is the Cisco recommended VLAN for switch-management traffic
C. It is most secure when it is a ssigned to vLAn 1.
D. It is the cisco-recomme nded vlan for user traffic
【单选题】
There are two versions of IKE:IKEv1 and IKEv2. Both IKEv1 and IKEv2 protocols operate in phases IKEv1 operates in two phases. IKEv2 operates in how many phases？___
【单选题】
What does the dh group refer to？___
A. length of key for hashing C
B. length of key for encryption
C. tunnel lifetime key
D. length of key for key exchange
E. length of key for authentication
【单选题】
Which path do you follow to enable aaa through the SDM ？___
A. Configure Tasks > AAA
B. Configure > Addition Authentication > AAA
C. Configure > AAA
D. Configure > Additional Tasks > AAA
E. Configure Authentication > AAA
【单选题】
which technology cloud be used on top of an MPLS VPN to add confidentiality ？___
A. IPsec
B. 3DES
C. AES
D. SSL
【单选题】
Which term is most closely aligned with the basic purpose of a SIEM solution? ___
A. Non-Repudiation
B. Accountability
C. Causality
D. Repudiation
【单选题】
You have just deployed SNMPv3 in your environment， Your manager asks you to make sure that our SNMP agents can only talk to the SNMP Manager. What would you configure on your SNMI agents to satisfy this request？___
A. A SNMP View containing the SNMP managers
B. Routing Filter with the SNMP managers in it applied outbound
C. A standard ACL containing the SNMP managers applied to the SNMP configuration
D. A SNMP Group containing the SNMP managers
【单选题】
Which feature prevents loops by moving a nontrunking port into an errdisable state when a BPDU is received on that port？___
A. BPDU filte
B. DHCP snooping
C. BPDU guard
D. Port Fast
【单选题】
Which command enables port security to use sticky MAC addresses on a switch？___
A. switchport port-security violation restrict
B. switchport port-security mac-address sticky
C. switchport port-security violation protect
D. switchport port-security
【单选题】
When you edit an IPS subsignature， what is the effect on the parent signature and the family of subsignatures？___
A. The change applies to the parent signature and the entire family of subsignatures
B. The change applies to the parent signature and the subsignature that you edit
C. The change applies only to subsignatures that are numbered sequentially after the subsignature that you edit
D. Other signatures are unaffected， the change applies only to the subsignature that you dit
【单选题】
Which type of mechanism does Cisco FirePOWER de ploy to protect ag detected moving across other networks？___
A. antivirus scanning
B. policy-based
C. reputation-based
D. signature-based
【单选题】
What action must you take on the ise to blacklist a wired device？___
A. Locate the switch through which the device is connected and push an a cl restricting all access by the device
B. Issue a CoA request for the de vice's mac address to each access switch in the network
C. Revoke the device's certificate so it is unable to authenticate to the network
D. Add the device's MAc address to a list of black listed devices
【单选题】
Which type of firewall can perform deep packet inspection？___
A. packet-filtering firewall
B. stateless firewall
C. application firewall
D. personal firewall
【单选题】
What is the main purpose of Control Plane Policing？___
A. to prevent exhaustion of route-proce ssor resources
B. to organize the egress packet queues
C. to define traffic classes
D. to maintain the policy map
【单选题】
Which attack can be prevented by OSPF authentication？___
A. smurf attack
B. IP spoofing attack
C. denial of service attack
D. buffer overflow attack
【单选题】
What is the best definition of hairpinning？___
A. ingress traffic that traverses the outbound interface on a device
B. traffic that enters one interface on a device and that exits through another interface
C. traffic that enters and exits a device through the same interface
D. traffic that tunnels through a device interface
【单选题】
Which SNMPv3 security level provides authentication using HMAC with MD5， but does not use encryption？___
A. authPriv
B. authNo Priv
C. noAuthNoPriv
D. NoauthPriv
【单选题】
You have implemented a dynamic blacklist， using security intelligence to block illicit network activity. However， the blacklist contains several approved connections that users must access for usiness pur poses. Which action can you take to retain the blacklist while allowing users to access the approve d sites？___
A. Create a whitelist and manually add the approved addresses.
B. Disable the dynamic blacklist and deny the specif ic address on a whitelist while permitting the others
C. Edit the dynamic blacklist to remove the approved addresses
D. Disable the dynamic blacklist and create a static blacklist in its place
【单选题】
When connecting to an external resource,you must change a source IP address to use one IP address from a range of 207.165.201.1 to 207.165.1.30. Which option do you implement ?___
A. dynamic source NAT that uses an IP ad dress as a mapped source
B. static destination NAT that uses a subnet as a real de stination
C. dynamic source NAT that uses a range as a mapped source
D. static destination NAT that uses a subnet as a real source
【单选题】
Refer to the exhibit. 【nat（ins，any）dynamic interface】Which ty pe of NaT is configured on a Cisco ASA？___
A. dynamic NAT
B. source identity NAT
C. dynamic PAT
D. identity twice NAT
【单选题】
Which mitigation technology for web-based threats prevents the removal of confidential data from the network？___
A. CTA
B. DCA
C. AMP
D. DLP
【单选题】
Refer to the exhibit. What is the effect of the given configuration？___
A. It establishes the preshared key for the switch
B. It establishes the preshared key for the firewall.
C. It establishes the preshared key for the Cisco ISE appliance
D. It establishes the preshared key for the router.
【多选题】
What are two major considerations when choosing between a SPAN and a TAP when plementing IPS？___
A. the type of analysis the iS will perform
B. the amount of bandwidth available
C. whether RX and TX signals will use separate ports
D. the way in which media errors will be handled
E. the way in which dropped packets will be handled
【多选题】
What are two direct-to-tower methods for redirecting web traffic to Cisco Cloud Web Security？___
A. third-party proxies
B. Cisco Catalyst platforms
C. Cisco NAC Agent
D. hosted PAC files
E. CiSco ISE
【多选题】
Which three descriptions of RADIUS are true？ ___
A. It uses TCP as its transport protocol.
B. Only the password is encrypted
C. It supports multiple transport protocols
D. It uses UDP as its transport protocol
E. It combines authentication and authorization
F. It separates authentication，authorization，and accounting
【多选题】
Which two configurations can prevent VLAN hopping attack from attackers at VLAN 10？___
A. using switchport trunk native vlan 10 command on trunk ports
B. enabling BPDU guard on all access ports
C. creating VLAN 99 and using switchport trunk native vlan 99 command on trunk ports
D. applying ACl between VLAN
E. using switchport mode access command on all host ports
F. using switchport nonegotiate command on dynamic desirable ports
推荐试题
【单选题】
(76826)人工转动轴承检查时，可能会使用___。(1.0分)
A. 轴承磨合试验台
B. 轮对自动检测装置
C. 轴承故障诊断器
D. 轴承退卸机
【单选题】
(76827)轴承压装后，轴端螺栓须均匀紧固，紧固力矩为___。(1.0分)
A. 210～220Nm
B. 212～222Nm
C. 214～224Nm
D. 216～226Nm
【单选题】
(76828)无轴箱滚动轴承压装中止贴合压力应大于最大压装力___以上。(1.0分)
A. 88.2kN
B. 196kN
C. 216kN
D. 247kN
【单选题】
(76829)352226X2－2RZ（TN）型大修轴承，距首次压装时间满___时须退卸。(1.0分)
A. 4年6个月
B. 5年
C. 6年6个月
D. 7年6个月
【单选题】
(76830)352226X2－2RZ（TN）型大修轴承，运行___km时须退卸。(1.0分)
A. 45万km
B. 50万km
C. 65万km
D. 75万km
【单选题】
(76831)353130B型新造或大修轴承，距首次压装时间满___时须退卸。(1.0分)
A. 4年6个月
B. 5年
C. 6年6个月
D. 7年6个月
【单选题】
(76832)遭受火灾车上的轮对，轴承外观检测良好，则该条轮对___。(1.0分)
A. 可装车使用
B. 应退检轴承
C. 轴承应报废
D. 轮对送厂
【单选题】
(76833)段修时，352226X2-2RZ型轴承的轴向游隙大于___时须退卸。(1.0分)
A. 0.075mm
B. 0.54mm
C. 0.58 mm
D. 0.75mm
【单选题】
(76834)以下除___外，须退卸轴承。(1.0分)
A. 轴承密封失效
B. 电流通过轴承
C. 装用进口轴承
D. 外圈破损
【单选题】
(76835)前盖和后挡护缘内径面未经机械加工的须按图样要求补充加工，其尺寸应符合直径___ mm的限 度要求。(1.0分)
A. 170 +0.305 +0.145
B. 180 +0.305 +0.145
C. 190 +0.305 +0.145
D. 200 +0.305 +0.145
【单选题】
(76836)压装间的温度应不低于10℃。检测和选配前，轴承及附件、轮对及检测器具同室存放，放置时间 应不少于___小时。(1.0分)
【单选题】
(76837)轴箱前盖须选配组装，前盖凸缘端面应压紧轴承外圈端面，轴箱前盖须加装O型橡胶密封圈与轴箱 密封，组装后前盖与轴箱体端面应有___的间隙。(1.0分)
A. 0.2mm～1.0mm
B. 0.2mm～1.5mm
C. 0.2mm～2.0mm
D. 0.2mm～2.5mm
【单选题】
(76838)___不属于送厂轮对故障。(1.0分)
A. 左辋超限
B. 幅板孔裂纹5mm
C. 右辋超限
D. 左轮辋裂
【单选题】
(76839)目前正在要求淘汰的车轮是___(1.0分)
A. 铸钢车轮
B. 辗钢车轮
C. 幅板孔车轮
D. 无幅板孔车轮
【单选题】
(76840)车轮辐板孔存在周向裂纹长度不超过___mm时，须在车统—51C卡片的轮对检修故障栏内做好记 录。(1.0分)
【单选题】
(76841)不退卸轴承的轮轴在冲洗前须加装防水保护套，以防止___。(1.0分)
A. 轴承生锈
B. 车轴生锈
C. 轴承进水
D. 轴承转动
【单选题】
(76842)有辐板孔车轮的内侧辐板孔部位经除锈后各部位表面须露出___，不得有油漆、锈垢存在。(1.0 分)
A. 基本金属面
B. 倒角
C. 辐板孔轮廓面
D. 孔状
【单选题】
(76843)达不到探伤要求时，应进行___补充除锈，否则不得进入下道工序。(1.0分)
【单选题】
(76844)荧光磁悬液浓度（采用体积浓度）应控制在___范围内。(1.0分)
A. 0.1～0.6mL/100mL
B. 0.2～0.5mL/100mL
C. 0.2～0.6mL/100mL
D. 0.1～0.5mL/100mL
【单选题】
(76845)磁粉探伤通电磁化时间应为1s～3s，停止喷淋磁悬液后应再磁化___，每次0.5s～1.0s。(1.0 分)
A. １次～3次
B. 1次～2次
C. 2次
D. 2次～3次
【单选题】
(76846)退磁后，轮对剩磁不得超过___。(1.0分)
A. 0.3mT(7Gs)
B. 0.7mT(7Gs)
C. 0.5mT(7Gs)
D. 10mT(7Gs)
【单选题】
(76847)以样板轮轴、轮对上相应部位深度为1.0mm的人工裂纹反射波达到垂直满幅的___ 时的dB值作 为相应探头的探伤灵敏度。(1.0分)
A. 40％
B. 60％
C. 80％
D. 100％
【单选题】
(76848)移动探头并调整仪器，使人工裂纹的一次反射波达到荧光屏垂直满幅的80％，然后补偿 ___， 以此作为RE2轮轴横波斜探头的探伤灵敏度。(1.0分)
A. 2dB～6dB
B. 6dB～12dB
C. 10dB～12dB
D. 12dB～18dB
【单选题】
(76849)超声波___在很大程度上决定了超声波对缺陷的探测能力。(1.0分)
A. 波长
B. 频率
C. 声速
D. 以上都不对
【单选题】
(76850)轮对组装后须对___、盘座镶入部施行超声波探伤检查。(1.0分)
A. 轴颈卸荷槽
B. 轮座
C. 车轴
D. 轴身
【单选题】
(76851)在超声波检测中，最常使用的频率范围为___。(1.0分)
A. 0.5～1MHz
B. 0.5～2MHz
C. 0.5～10MHz
D. 0.5～100MHz
【单选题】
(76852)轴身探伤作业时，使用的耦合剂应为水剂内供式乳化液；配置乳化液时皂化油与水的比例为 ___。(1.0分)
A. 1:5
B. 1:6
C. 1:8
D. 以上都不是
【单选题】
(76853)货车轮对经旋修后，同一轮对的两车轮直径差不大于___。(1.0分)
A. 1mm
B. 1.5mm
C. 2mm
D. 3mm
【单选题】
(76854)货车未经旋修的轮对，同一轮对的两车轮直径差不大于___。(1.0分)
A. 1mm
B. 1.5mm
C. 2mm
D. 3mm
【单选题】
(76855)车轮踏面及轮缘旋修时其轮缘厚度可恢复到厂、段修及以上限度，但轮缘高度必须恢复到___。 (1.0分)
A. 26mm
B. 27mm
C. 28±1mm
D. 27±1mm
【单选题】
(76856)1999年3月以后生产的SKF197726型新造轴承，距首次压装时间满___时须退卸。(1.0分)
A. 4年6个月
B. 5年
C. 6年6个月
D. 7年6个月
【单选题】
(76857)1999年3月以后生产的SKF197726型轴承大修后，距首次压装时间满___时须退卸。(1.0分)
A. 4年6个月
B. 5年
C. 6年6个月
D. 7年6个月
【单选题】
(76858)轴承压装后，左右旋转___圈，转动须灵活，不得卡阻，且须进行磨合测试。(1.0分)
A. 1～2圈
B. 2～3圈
C. 3～4圈
D. 3～5圈
【单选题】
(76859)轴承压装后必须左右旋转3～5圈，转动必须灵活，不得有卡阻现象，并进行转速≥___转/分 钟，时间≥5分钟的磨合试验，检查轴承状态，并做好记录。 (1.0分)
A. 120
B. 180
C. 200
D. 250
【单选题】
(76860)轴承磨合试验时间不得少于___分钟，且转速不得少于200转/分钟。(1.0分)
【单选题】
(76861)轴承压装后，进行转速不低于200r/min，时间不少于5min的磨合测试。磨合过程中轴承温升不应 高于___。(1.0分)
A. 25℃
B. 30℃
C. 35℃
D. 40℃
【单选题】
___。(1.0分)
A. 185mm
B. 187mm
C. 195mm
D. 197mm
【单选题】
(76863)16号车钩弹性支承装置组装后，支承弹簧座腔顶部至支承托板下平面的距离须大于___。(1.0 分)
A. 40mm
B. 42mm
C. 44mm
D. 48mm
【单选题】
(76864)转K4型橡胶弹性下旁承，尼龙下旁承体裂损、侧面单侧磨耗大于___时更换。(1.0分)
A. 1mm
B. 2mm
C. 3mm
D. 4mm
【单选题】
(76865)除转8A型外，同一转向架摇枕弹簧各外圈自由高度差不大于___mm。(1.0分)
