【多选题】
choose four___
A. Step1————————run the system setup wizard
B. Step2————————add an authentication realm
C. Step3————————configure identity management
D. Step4————————configure directory group
查看试卷，进入试卷练习
微信扫一扫，开始刷题
相关试题
【多选题】
What are two advanced features of the Cisco AMp solution for endpoints ___
A. contemplation
B. foresight
C. sandboxing
D. reputation
E. reflection
【多选题】
Which two characteristics of RADIUS are true？___
A. It encrypts only the password between user and server.
B. It uses TCP ports 1812/1813
C. It uses UDP ports 1812/1813.
D. It uses UDP port 49
E. It uses TCP port 49
【多选题】
What are two challenges of using a network-based IPS？ ___
A. It is unable to determine whether a detected attack was successful
B. It requires additional storage and proce ssor capacity on syslog servers
C. As the network expands， it requires you to add more sensors.
D. It is unable to detect attacks across the entire network
E. It must support multiple operating systems.
【多选题】
What are two default be haviors of the traffic on a zone-based firewall？___
A. Traffic within the self -zone uses an im plicit deny all.
B. All traffic between zones is implicitly blocked
C. Communication is allowed between interfadAss that are members of the same zone
D. Communication is blocked between interfaces that are members of the same zone
E. The CBAC rules that are configured on router interfaces apply to zone interfaces
【多选题】
Which two advantages does the on-premise model for MDM deployment have over the cloud-based model？___
A. The on-premise model is easier and faster to de ploy than the cloud-based model
B. The on-premise model is more scalable than the cloud-based model
C. The on-premise model is generally less expensive than the cloud-based model
D. The on-premise model generally has less latency than the cloud- based model.
E. The on-premise model provides more control of the MDM solution than the cloud
【多选题】
Which two actions can an end usts take to manage a lost or stolen device in Cisco ISE？ ___
A. Activate Cisco ISE End point Protection Services to quarantine the device.
B. Add the mac address of the device to a list of blacklisted devices
C. Force the device to be locked with a PIN
D. Request revocation of the digital certificate of the device.
E. Reinstate a device that the user previously marked as lost or stolen
【多选题】
Which two problems can arise when a proxy firewall serves as the gateway between networks？___
A. It can prevent content caching
B. It can limit application support
C. It is unable to prevent direct connections to other networks
D. It can cause reduced throughput.
E. It is unable to provide antivirus protection
【多选题】
When using the Adaptive Security Device Manager（ASDM）， which two methods are available to add a new root certificate？___
A. Use sCep
B. Install from SFTP server
C. Install from a file
D. Use Https
E. Use LDAP
【多选题】
Which two are considered basic security principles？___
A. Accountability
B. Redundancy
C. High Availabilit
D. Integrity
E. Confidentiality
【多选题】
Which two roles of the Cisco WSA are true？___
A. IPS
B. firewall
C. antispam
D. web proxy
E. URL filter
【单选题】
Which next-generation encryption algorithm supports four variants？___
A. SHA-2
B. SHA-1
C. MD5
D. HMAC
【单选题】
What aims to remove the abil ity to deny an action？___
A. Non-Repudiation
B. Accountability
C. Integrity
D. Deniability
【单选题】
Which statements about the native VLAN is true ？___
A. It is susceptible to VLAN hopping attacks.
B. It is the Cisco recommended VLAN for switch-management traffic
C. It is most secure when it is a ssigned to vLAn 1.
D. It is the cisco-recomme nded vlan for user traffic
【单选题】
There are two versions of IKE:IKEv1 and IKEv2. Both IKEv1 and IKEv2 protocols operate in phases IKEv1 operates in two phases. IKEv2 operates in how many phases？___
【单选题】
What does the dh group refer to？___
A. length of key for hashing C
B. length of key for encryption
C. tunnel lifetime key
D. length of key for key exchange
E. length of key for authentication
【单选题】
Which path do you follow to enable aaa through the SDM ？___
A. Configure Tasks > AAA
B. Configure > Addition Authentication > AAA
C. Configure > AAA
D. Configure > Additional Tasks > AAA
E. Configure Authentication > AAA
【单选题】
which technology cloud be used on top of an MPLS VPN to add confidentiality ？___
A. IPsec
B. 3DES
C. AES
D. SSL
【单选题】
Which term is most closely aligned with the basic purpose of a SIEM solution? ___
A. Non-Repudiation
B. Accountability
C. Causality
D. Repudiation
【单选题】
You have just deployed SNMPv3 in your environment， Your manager asks you to make sure that our SNMP agents can only talk to the SNMP Manager. What would you configure on your SNMI agents to satisfy this request？___
A. A SNMP View containing the SNMP managers
B. Routing Filter with the SNMP managers in it applied outbound
C. A standard ACL containing the SNMP managers applied to the SNMP configuration
D. A SNMP Group containing the SNMP managers
【单选题】
Which feature prevents loops by moving a nontrunking port into an errdisable state when a BPDU is received on that port？___
A. BPDU filte
B. DHCP snooping
C. BPDU guard
D. Port Fast
【单选题】
Which command enables port security to use sticky MAC addresses on a switch？___
A. switchport port-security violation restrict
B. switchport port-security mac-address sticky
C. switchport port-security violation protect
D. switchport port-security
【单选题】
When you edit an IPS subsignature， what is the effect on the parent signature and the family of subsignatures？___
A. The change applies to the parent signature and the entire family of subsignatures
B. The change applies to the parent signature and the subsignature that you edit
C. The change applies only to subsignatures that are numbered sequentially after the subsignature that you edit
D. Other signatures are unaffected， the change applies only to the subsignature that you dit
【单选题】
Which type of mechanism does Cisco FirePOWER de ploy to protect ag detected moving across other networks？___
A. antivirus scanning
B. policy-based
C. reputation-based
D. signature-based
【单选题】
What action must you take on the ise to blacklist a wired device？___
A. Locate the switch through which the device is connected and push an a cl restricting all access by the device
B. Issue a CoA request for the de vice's mac address to each access switch in the network
C. Revoke the device's certificate so it is unable to authenticate to the network
D. Add the device's MAc address to a list of black listed devices
【单选题】
Which type of firewall can perform deep packet inspection？___
A. packet-filtering firewall
B. stateless firewall
C. application firewall
D. personal firewall
【单选题】
What is the main purpose of Control Plane Policing？___
A. to prevent exhaustion of route-proce ssor resources
B. to organize the egress packet queues
C. to define traffic classes
D. to maintain the policy map
【单选题】
Which attack can be prevented by OSPF authentication？___
A. smurf attack
B. IP spoofing attack
C. denial of service attack
D. buffer overflow attack
【单选题】
What is the best definition of hairpinning？___
A. ingress traffic that traverses the outbound interface on a device
B. traffic that enters one interface on a device and that exits through another interface
C. traffic that enters and exits a device through the same interface
D. traffic that tunnels through a device interface
【单选题】
Which SNMPv3 security level provides authentication using HMAC with MD5， but does not use encryption？___
A. authPriv
B. authNo Priv
C. noAuthNoPriv
D. NoauthPriv
【单选题】
You have implemented a dynamic blacklist， using security intelligence to block illicit network activity. However， the blacklist contains several approved connections that users must access for usiness pur poses. Which action can you take to retain the blacklist while allowing users to access the approve d sites？___
A. Create a whitelist and manually add the approved addresses.
B. Disable the dynamic blacklist and deny the specif ic address on a whitelist while permitting the others
C. Edit the dynamic blacklist to remove the approved addresses
D. Disable the dynamic blacklist and create a static blacklist in its place
【单选题】
When connecting to an external resource,you must change a source IP address to use one IP address from a range of 207.165.201.1 to 207.165.1.30. Which option do you implement ?___
A. dynamic source NAT that uses an IP ad dress as a mapped source
B. static destination NAT that uses a subnet as a real de stination
C. dynamic source NAT that uses a range as a mapped source
D. static destination NAT that uses a subnet as a real source
【单选题】
Refer to the exhibit. 【nat（ins，any）dynamic interface】Which ty pe of NaT is configured on a Cisco ASA？___
A. dynamic NAT
B. source identity NAT
C. dynamic PAT
D. identity twice NAT
【单选题】
Which mitigation technology for web-based threats prevents the removal of confidential data from the network？___
A. CTA
B. DCA
C. AMP
D. DLP
【单选题】
Refer to the exhibit. What is the effect of the given configuration？___
A. It establishes the preshared key for the switch
B. It establishes the preshared key for the firewall.
C. It establishes the preshared key for the Cisco ISE appliance
D. It establishes the preshared key for the router.
【多选题】
What are two major considerations when choosing between a SPAN and a TAP when plementing IPS？___
A. the type of analysis the iS will perform
B. the amount of bandwidth available
C. whether RX and TX signals will use separate ports
D. the way in which media errors will be handled
E. the way in which dropped packets will be handled
【多选题】
What are two direct-to-tower methods for redirecting web traffic to Cisco Cloud Web Security？___
A. third-party proxies
B. Cisco Catalyst platforms
C. Cisco NAC Agent
D. hosted PAC files
E. CiSco ISE
【多选题】
Which three descriptions of RADIUS are true？ ___
A. It uses TCP as its transport protocol.
B. Only the password is encrypted
C. It supports multiple transport protocols
D. It uses UDP as its transport protocol
E. It combines authentication and authorization
F. It separates authentication，authorization，and accounting
【多选题】
Which two configurations can prevent VLAN hopping attack from attackers at VLAN 10？___
A. using switchport trunk native vlan 10 command on trunk ports
B. enabling BPDU guard on all access ports
C. creating VLAN 99 and using switchport trunk native vlan 99 command on trunk ports
D. applying ACl between VLAN
E. using switchport mode access command on all host ports
F. using switchport nonegotiate command on dynamic desirable ports
【多选题】
What are two features of transparent firewall mode ___
A. It conceals the presence of the firewall from attackers
B. It allows some traffic that is blocked in routed mode
C. It enables the aSA to perform as a router.
D. It acts as a routed hop in the network.
E. It is configured by default
【多选题】
Which two models of A sa tend to be used in a data center？___
A. 5555X
B. 5585X
C. ASA service module
D. 5512X
E. 5540
F. 5520
推荐试题
【单选题】
拖动模式限速___。
A. 75km/h
B. 60km/h
C. 45km/h
D. 30km/h
【单选题】
RM模式限速___。
A. 75km/h
B. 60km/h
C. 25km/h
D. 30km/h
【单选题】
ATC切除模式限速___。
A. 75km/h
B. 60km/h
C. 25km/h
D. 30km/h
【单选题】
无自动广播分合微动开关（=45-F101）后，大约___后才能设置广播。
A. 10S
B. 15S
C. 20S
D. 18S
【单选题】
列车激活后，当方向手柄位于“0”位时，激活端标志灯为___。
【单选题】
列车激活后，当方向手柄位于“0”位时，非激活端标志灯为___。
【单选题】
列车激活后，当方向手柄向前时，激活端标志灯___。
【单选题】
列车激活后，当方向手柄向前时，非激活端标志灯为___。
【单选题】
列车激活后，当方向手柄向后时，激活端标志灯为___。
【单选题】
___空调故障，运营到前方终点站退出服务。
A. 3个
B. 4个
C. 3个以上
D. 4个以上
【单选题】
控制受电弓的电磁阀在车辆什么位置？___
A. 司机室设备柜
B. B车二位端升弓柜
C. B车一位端电子柜
D. C车一位端电子柜
【单选题】
强开门开关为___。
A. =81-S109
B. =81-S101
C. =81-S102
D. =81-S101
【单选题】
门网络硬线开关为___。
A. =81-S109
B. =81-S103
C. =81-S102
D. =81-S101
【单选题】
零速旁路开关为___。
A. =81-S109
B. =81-S103
C. =81-S102
D. =81-S101
【单选题】
受电弓升起时接触网停电，受电弓的状态为___。
A. 正常显示
B. 双弓降
C. 双弓出现？号
D. 双弓显红
【单选题】
有ATP下，车门紧急解锁导致列车___。
A. 紧急制动
B. 失去牵引力
C. 惰行
D. 无影响
【单选题】
司机开锁后HMI屏无显示、花屏，应确认另一端___未激活。
A. 蓄电池
B. 司机台
C. 列车控制空开
D. I\O模块空开
【单选题】
长沙地铁2号线客室LED照明的工作环境温度为___。
A. -12℃～+40.6℃
B. -13℃～+40.6℃
C. -14℃～+40.6℃
D. -15℃～+40.6℃
【单选题】
长沙地铁2号线客室LED照明的最大输出功率为___
A. 140W
B. 130W
C. 120W
D. 150W
【单选题】
长沙地铁2号线客室LED照明的输出电压档位是哪四个___：
A. 50V、55V、60V、65V
B. 53V、57V、60V、63V
C. 53V、55V、57V、59V
D. 51V、53V、57V、60V
【单选题】
长沙地铁2号线客室LED照明的最大输出电流为___
A. 2.2A
B. 2.4A
C. 2.8A
D. 2.9A
【单选题】
长沙地铁2号线客室车厢内灯具在电气结构上分为___路灯带。
【单选题】
长沙地铁2号线列车运行灯的电压为多少___
A. DC12V
B. DC36V
C. DC110V
D. DC24V
【单选题】
列车激活开关72-S101的位置在___。
A. +114柜
B. +115柜
C. +241柜
D. +341柜
【单选题】
长沙地铁2号线受电弓的工作电压范围是___
A. DC 850V～DC 1600V
B. DC 800V～DC 1800V
C. DC 1000V～DC 1700V
D. DC 1000V～DC 2000V
【单选题】
长沙地铁2号线受电弓的额定工作电流是___
A. 1200A
B. 1300A
C. 1600A
D. 1400A
【单选题】
长沙地铁2号线受电弓的最大工作电流是___
A. 2060A
B. 2160A
C. 2260A
D. 2360A
【单选题】
长沙地铁2号线受电弓的车辆静止时最大电流是___
A. 460A
B. 480A
C. 490A
D. 500A
【单选题】
编号说明里面位置+115.1的+115是指___。
A. 位置号
B. 子位置号
C. 编号
D. 功能组号
【单选题】
电路图功能组号=10是指___。
A. 控制电路
B. 辅助电路
C. 主电路
D. 辅助设备
【单选题】
电路图功能组号=50是指___。
A. 空调
B. 照明
C. 车门控制
D. 辅助设备
【单选题】
电路图功能组号=20是指___
A. 控制电路
B. 照明
C. 主电路
D. 辅助设备
【单选题】
电路图功能组号=30是指___
A. 特殊设备
B. 辅助电路
C. 主电路
D. 空调
【单选题】
电路图功能组号=40是指___
A. 外部照明
B. 车门控制
C. 列车控制网络乘客信息系统
D. 辅助设备
【单选题】
电路图功能组号=60是指___
A. 空调
B. 照明
C. 主电路
D. 辅助设备
【单选题】
电路图功能组号=70是指___
A. 控制电路
B. 车门控制
C. 主电路
D. 辅助设备
【单选题】
电路图功能组号=80是指___
A. 空调
B. 特殊设备
C. 车门控制
D. 照明
【单选题】
电路图功能组号=90是指___
A. 特殊设备
B. 车门控制
C. 列车控制网络乘客信息系统
D. 照明
【单选题】
电路图中位置号说明里面+111代表Tc车哪个地方___
A. 司机操作台
B. 微机柜
C. 司机室
D. 空调柜
【单选题】
电路图中位置号说明里面+164代表Tc车哪个地方___
A. 右侧墙
B. 左侧墙
C. 司机室
D. 低压箱
