刷题
导入试题
【单选题】
When you edit an IPS subsignature, what is the effect on the parent signature and the family of subsignatures?___
A. The change applies to the parent signature and the entire family of subsignatures
B. The change applies to the parent signature and the subsignature that you edit
C. The change applies only to subsignatures that are numbered sequentially after the subsignature that you edit
D. Other signatures are unaffected, the change applies only to the subsignature that you dit
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
B
解析
暂无解析
相关试题
【单选题】
Which type of mechanism does Cisco FirePOWER de ploy to protect ag detected moving across other networks?___
A. antivirus scanning
B. policy-based
C. reputation-based
D. signature-based
【单选题】
What action must you take on the ise to blacklist a wired device?___
A. Locate the switch through which the device is connected and push an a cl restricting all access by the device
B. Issue a CoA request for the de vice's mac address to each access switch in the network
C. Revoke the device's certificate so it is unable to authenticate to the network
D. Add the device's MAc address to a list of black listed devices
【单选题】
Which type of firewall can perform deep packet inspection?___
A. packet-filtering firewall
B. stateless firewall
C. application firewall
D. personal firewall
【单选题】
What is the main purpose of Control Plane Policing?___
A. to prevent exhaustion of route-proce ssor resources
B. to organize the egress packet queues
C. to define traffic classes
D. to maintain the policy map
【单选题】
Which attack can be prevented by OSPF authentication?___
A. smurf attack
B. IP spoofing attack
C. denial of service attack
D. buffer overflow attack
【单选题】
What is the best definition of hairpinning?___
A. ingress traffic that traverses the outbound interface on a device
B. traffic that enters one interface on a device and that exits through another interface
C. traffic that enters and exits a device through the same interface
D. traffic that tunnels through a device interface
【单选题】
Which SNMPv3 security level provides authentication using HMAC with MD5, but does not use encryption?___
A. authPriv
B. authNo Priv
C. noAuthNoPriv
D. NoauthPriv
【单选题】
You have implemented a dynamic blacklist, using security intelligence to block illicit network activity. However, the blacklist contains several approved connections that users must access for usiness pur poses. Which action can you take to retain the blacklist while allowing users to access the approve d sites?___
A. Create a whitelist and manually add the approved addresses.
B. Disable the dynamic blacklist and deny the specif ic address on a whitelist while permitting the others
C. Edit the dynamic blacklist to remove the approved addresses
D. Disable the dynamic blacklist and create a static blacklist in its place
【单选题】
When connecting to an external resource,you must change a source IP address to use one IP address from a range of 207.165.201.1 to 207.165.1.30. Which option do you implement ?___
A. dynamic source NAT that uses an IP ad dress as a mapped source
B. static destination NAT that uses a subnet as a real de stination
C. dynamic source NAT that uses a range as a mapped source
D. static destination NAT that uses a subnet as a real source
【单选题】
Refer to the exhibit. 【nat(ins,any)dynamic interface】Which ty pe of NaT is configured on a Cisco ASA?___
A. dynamic NAT
B. source identity NAT
C. dynamic PAT
D. identity twice NAT
【单选题】
Which mitigation technology for web-based threats prevents the removal of confidential data from the network?___
A. CTA
B. DCA
C. AMP
D. DLP
【单选题】
Refer to the exhibit. What is the effect of the given configuration?___
A. It establishes the preshared key for the switch
B. It establishes the preshared key for the firewall.
C. It establishes the preshared key for the Cisco ISE appliance
D. It establishes the preshared key for the router.
【多选题】
What are two major considerations when choosing between a SPAN and a TAP when plementing IPS?___
A. the type of analysis the iS will perform
B. the amount of bandwidth available
C. whether RX and TX signals will use separate ports
D. the way in which media errors will be handled
E. the way in which dropped packets will be handled
【多选题】
What are two direct-to-tower methods for redirecting web traffic to Cisco Cloud Web Security?___
A. third-party proxies
B. Cisco Catalyst platforms
C. Cisco NAC Agent
D. hosted PAC files
E. CiSco ISE
【多选题】
Which three descriptions of RADIUS are true? ___
A. It uses TCP as its transport protocol.
B. Only the password is encrypted
C. It supports multiple transport protocols
D. It uses UDP as its transport protocol
E. It combines authentication and authorization
F. It separates authentication,authorization,and accounting
【多选题】
Which two configurations can prevent VLAN hopping attack from attackers at VLAN 10?___
A. using switchport trunk native vlan 10 command on trunk ports
B. enabling BPDU guard on all access ports
C. creating VLAN 99 and using switchport trunk native vlan 99 command on trunk ports
D. applying ACl between VLAN
E. using switchport mode access command on all host ports
F. using switchport nonegotiate command on dynamic desirable ports
【多选题】
What are two features of transparent firewall mode ___
A. It conceals the presence of the firewall from attackers
B. It allows some traffic that is blocked in routed mode
C. It enables the aSA to perform as a router.
D. It acts as a routed hop in the network.
E. It is configured by default
【多选题】
Which two models of A sa tend to be used in a data center?___
A. 5555X
B. 5585X
C. ASA service module
D. 5512X
E. 5540
F. 5520
【多选题】
Which two statements about hardware-based encrption are true?___
A. It is widely accessible
B. It is potentially easier to compromise than software-based encryption. It requires minimal configuration
C. It requires minimal configuration
D. It can be implemented without impacting performance
E. It is highly cost-effective
【多选题】
In which two modes can the Cisco We b Security appliance be de ployed?___
A. as a transparent proxy using the Secure Sockets Layer protocol
B. as a transparent proxy using the Web Cache Communication Protocol
C. explicit proxy mode
D. as a transparent proxy using the Hyper Text Transfer Protocol
E. explicit active mode
【单选题】
1.三相刀开关的图形符号与交流接触器的主触点符号是___。
A. 一样的
B. 可以互换
C. 有区别的
D. 没有区别
【单选题】
2.刀开关的文字符号是___。
A. QS
B. SQ
C. SA
D. KM
【单选题】
3.行程开关的文字符号是___。
A. QS
B. SQ
C. SA
D. KM
【单选题】
4.交流接触器的文字符号是___。
A. QS
B. SQ
C. SA
D. KM
【单选题】
5.熔断器的作用是___。
A. 短路保护
B. 过载保护
C. 失压保护
D. 零压保护
【单选题】
6.热继电器的作用是___。
A. 短路保护
B. 过载保护
C. 失压保护
D. 零压保护
【单选题】
7.交流接触器的作用是可以___接通和断开负载。
A. 频繁地
B. 偶尔
C. 手动
D. 不需
【单选题】
8.三相异步电动机的启停控制线路由电源开关、熔断器、___、热继电器、按钮等组成。
A. 时间继电器
B. 速度继电器
C. 交流接触器
D. 漏电保护器
【单选题】
9.三相异步电动机的启停控制线路中需要有___、过载保护和失压保护功能。
A. 短路保护
B. 超速保护
C. 失磁保护
D. 零速保护
【单选题】
10维修电工以___、安装接线图和平面布置图最为重要。
A. 电气原理图
B. 电气设备图
C. 电气安装图
D. 电气组装图
【单选题】
11.熔断器的额定电压应___线路的工作电压。
A. 远大于
B. 不等于
C. 小于等于
D. 大于等于
【单选题】
12.对于电阻性负载,熔断器熔体的额定电流___线路的工作电流。
A. 远大于
B. 不等于
C. 等于或略大于
D. 等于或略小于
【单选题】
13.对于电动机负载,熔断器熔体的额定电流应选电动机额定电流的___倍。
A. 1~1.5
B. 1.5-2.5
C. 2.0~3.0
D. 2.5~3.5
【单选题】
14.使用快速熔断器时,一般按___来选择。
A. IN=1.03IF
B. IN=1.57IF
C. IN=2.57IF
D. IN=3IF
【单选题】
15.断路器中过电流脱扣器的额定电流应该大于等于线路的___。
A. 最大允许电流
B. 最大过载电流
C. 最大负载电流
D. 最大短路电流
【单选题】
16.短路电流很大的电气线路中宜选用___断路器。
A. 塑壳式
B. 限流型
C. 框架式
D. 直流快速
【单选题】
17.一般电气控制系统中宜选用___断路器。
A. 塑壳式
B. 限流型
C. 框架式
D. 直流快速
【单选题】
18.交流接触器一般用于控制___的负载。
A. 弱电
B. 无线电
C. 直流电
D. 交流电
【单选题】
19.直流接触器一般用于控制___的负载。
A. 弱电
B. 无线电
C. 直流电
D. 交流电
【单选题】
20.接触器的额定电压应不小于主电路的___。
A. 短路电压
B. 工作电压
C. 最大电压
D. 峰值电压
推荐试题
【单选题】
5、走车电路中设置1~3ZJ及DJ、LJ常闭触头是控制___
A. LLC
B. LC
C. LLC.LC
【单选题】
6.闭合蓄电池闸刀XK,卸载信号灯7XD不亮的原因有___
A. Lc常闭触点不良
B. 6Dz分位 LLC吸合
【单选题】
7.闭合蓄电池开关XK,电压表无显示的原因___
A. 1Rd烧损
B. 蓄电池亏电
C. 蓄电池有反极现象
【单选题】
8.运行中,启动发电机停止发电的原因有___
A. 自动开关2DZ跳开
B. FLC线圈电路故障
C. 转入固定发电
【单选题】
9.主手柄从0位提到1位,机车不换向的原因为:___。
A. 换向电路有接地点
B. 低压风缸风压不足500kPa
C. 1-6C的常闭触头任一虚接
【单选题】
10.固定发电工况下,启动发电机的端电压在柴油机达到额定转速时,才可达到___。
A. 96V
B. 105V
C. 110V
【单选题】
11.工况转换开关1HKg、2HKg在牵引位时,通过主触头的控制,使牵引电动机成为( )电动机工作。
A. 并励
B. 复励
C. 串励
【单选题】
12.东风4型机车采用___励磁机
A. 感应子
B. 直流
C. 同步发电机
【单选题】
13.步进电动机是直流励磁的同步电机,它是将( )变成转子角位移的执行元件。
A. 励磁电流
B. 手柄位置
C. 电脉冲信号
【单选题】
14.功率电阻在减载极限位时,Cf有___的励磁电流。
A. 最小
B. 最大
C. 不变
【单选题】
15.励磁电路中,电阻___的整定值决定了同步牵引发电机的最高电压限制。
A. Rgt
B. Rlcf1
C. Rlcf2
【单选题】
16.、一些电磁接触器,为满足吸合之初与保持吸合时对电磁吸力的不同需要,所以要设( ).
A. 启动线圈
B. 电阻限流机构
C. 串联双绕组线圈
【单选题】
17.磁场削弱自动不能过渡,手动过渡正常时,为___故障。
A. 1ZJ常闭触头
B. 过渡装置
C. 1~2XC线圈
【单选题】
18.启机后闭合5K,辅助发电机电压显示11OV,蓄电池充放电电流表显示放电的原因是:___。
A. 2RD烧损
B. QC犯卡、烧结不释放
C. 逆流装置NL故障
【单选题】
19.走车电路中某电器线圈烧损短路时,主手柄l位___跳开。
A. 16DZ
B. 15DZ
C. 1DZ
【单选题】
20.使用接地开关DK及故障开关GK,均无法排除DJ动作时的原因是:___。
A. 主电路正端大线接地
B. 接地继电器DJ故障
C. 低电位点接地
【单选题】
21.励磁整流柜2ZL整流元件损坏时,机车___。
A. 过流继电器动作
B. 功率不足
C. 功率超高
【单选题】
22.牵引发电机突然发生短路的原因有:___。
A. 牵引发电机温度过高
B. IZL整流元件击穿
C. 电流互感器1~2LH故障
【单选题】
23.东风4型机车承载式车体的优点是:___。
A. 减少轴重转移
B. 重显轻、承载能力强
C. 减小了机车噪音
【单选题】
24.东风4B型客运机车构造速度为:___
A. 120km/h
B. 140km/h
C. 170km/h
【单选题】
25.机车牵引齿轮传动比越大,则___。
A. 速度越高、牵引力越大
B. 速度越低、牵引力越大
C. 速度越高、牵引力越小
【单选题】
26.由启动变速箱驱动的装置有:___。
A. 启动发电机、励磁机、测速发电机、后通风机
B. 启动发电机、励磁机、静液压泵、前通风机
C. 启动发电机、励磁机、测速发电机、前通风机
【单选题】
27.转向架的轴箱定位靠___完成。
A. 构架
B. 轴箱拉杆
C. 轴箱弹簧
【单选题】
28.当机车浮沉振动时,油压减振器的鞲鞴与缸筒所形成的上、下油腔容积会发生变化,其中的工作油在流经心阀或进油阀上的节流空时由于___作用而衰减了机车的振动。
A. 润滑
B. 粘滞阻力
C. 密封
【单选题】
29.使机车车体与转向架在纵向以关节形式连接起来,传递牵引力和制动力,以及车体与转向架间的各种冲击力,该部件是___。
A. 二系悬挂装置
B. 车体侧挡
C. 牵引杆装置
【单选题】
30.东风4B型机车牵引电动机的悬挂采用了___结构
A. 轴悬式
B. 架悬式
C. 体悬式
【单选题】
31.列车施行制动后不再进行缓解,根据列车减速情况进行追加减压,即可使列车停于预定地点,叫作___。P119T498
A. 一段制动法
B. 二段制动法
C. 牵引辅助法
【单选题】
32.防止列车断钩,坡道起动时,视情况可采用___的方法,随着列车缓解再逐步加大起动电流。P121T506
A. 先缓解制动后加载
B. 先加载后缓解制动
C. 直接起动
【单选题】
33.防止列车断钩,进站停车施行空气制动要适当加长制动距离,初次减压量要小,做到___。P121T506
A. “早减压、少减压”
B. 晚减压、大减压
C. 晚减压、少减压
【单选题】
34.以压力空气作为动力来源,但___用电来控制制动装置的制动、保压和缓解作用。P126T521
A. 空气制动机
B. 电空制动机
C. 真空制动机
【单选题】
35.使用带有闸片的制动钳夹紧安装在车轮两侧或车轴上的制动盘,使其发生摩擦阻力而产生制动作用称为___。P127T522
A. 闸瓦制动
B. 盘形制动
C. 轨道电磁制动
【单选题】
36.制动盘装在车轮上的叫___盘形制动基础制动装置。P130T532,
A. 轮盘式
B. 轴盘式
C. 摩擦式
【单选题】
37.截断塞门安装在车辆制动___上。P131T536
A. 主管两端
B. 主管中部
C. 支管
【单选题】
38.凡遇列车中某一车辆制动机发生故障,不能及时修复或因车辆装载的货物规定需停止使用该车制动机等情况时,可以关闭___,同时拉动缓解阀。P131T536
A. 折角塞门
B. 排风塞门
C. 截断塞门
【单选题】
39.一辆车的___,就是在制动管一定的减压速度下经过一定的时间或一定的减压量,制动机必须发生制动作用。P140T549
A. 制动灵敏度
B. 缓解灵敏度
C. 稳定性
【单选题】
40.制动管经排气口向大气排气时,制动管中的压力降将沿着列车长度___逐次传播,就是空气波。P140T550
A. 由后向前
B. 由中间到两端
C. 由前向后
【单选题】
41.LKJ-2000监控装置采用___工作方式。P170T694
A. 单机冗余
B. 双机冗余
C. 双机
【单选题】
42.LKJ-2000型监控记录装置事故状态记录器(黑匣子)在机车走行距离每变化___所有内容记录一次。P172T697
A. 5m
B. 10m
C. 20m
【单选题】
43.预设安全距离为20m时,紧急制动时的速度为80km/h,那么停车后的安全距离是___。P176T724
A. 50m
B. 60m
C. 70m
【单选题】
44.LKJ-2000型监控记录装置上电自检后,显示器进入主界面显示状态,两端操作___。《LKJ2000型列车运行监控记录装置》P255
A. 均无效
B. 一端有效
C. 均有效
欢迎使用我爱刷题
×
微信搜索我爱刷题小程序
温馨提示
×
请在电脑上登陆“www.woaishuati.com”使用