【单选题】
What aims to remove the abil ity to deny an action？___
A. Non-Repudiation
B. Accountability
C. Integrity
D. Deniability
查看试卷，进入试卷练习
微信扫一扫，开始刷题
相关试题
【单选题】
Which statements about the native VLAN is true ？___
A. It is susceptible to VLAN hopping attacks.
B. It is the Cisco recommended VLAN for switch-management traffic
C. It is most secure when it is a ssigned to vLAn 1.
D. It is the cisco-recomme nded vlan for user traffic
【单选题】
There are two versions of IKE:IKEv1 and IKEv2. Both IKEv1 and IKEv2 protocols operate in phases IKEv1 operates in two phases. IKEv2 operates in how many phases？___
【单选题】
What does the dh group refer to？___
A. length of key for hashing C
B. length of key for encryption
C. tunnel lifetime key
D. length of key for key exchange
E. length of key for authentication
【单选题】
Which path do you follow to enable aaa through the SDM ？___
A. Configure Tasks > AAA
B. Configure > Addition Authentication > AAA
C. Configure > AAA
D. Configure > Additional Tasks > AAA
E. Configure Authentication > AAA
【单选题】
which technology cloud be used on top of an MPLS VPN to add confidentiality ？___
A. IPsec
B. 3DES
C. AES
D. SSL
【单选题】
Which term is most closely aligned with the basic purpose of a SIEM solution? ___
A. Non-Repudiation
B. Accountability
C. Causality
D. Repudiation
【单选题】
You have just deployed SNMPv3 in your environment， Your manager asks you to make sure that our SNMP agents can only talk to the SNMP Manager. What would you configure on your SNMI agents to satisfy this request？___
A. A SNMP View containing the SNMP managers
B. Routing Filter with the SNMP managers in it applied outbound
C. A standard ACL containing the SNMP managers applied to the SNMP configuration
D. A SNMP Group containing the SNMP managers
【单选题】
Which feature prevents loops by moving a nontrunking port into an errdisable state when a BPDU is received on that port？___
A. BPDU filte
B. DHCP snooping
C. BPDU guard
D. Port Fast
【单选题】
Which command enables port security to use sticky MAC addresses on a switch？___
A. switchport port-security violation restrict
B. switchport port-security mac-address sticky
C. switchport port-security violation protect
D. switchport port-security
【单选题】
When you edit an IPS subsignature， what is the effect on the parent signature and the family of subsignatures？___
A. The change applies to the parent signature and the entire family of subsignatures
B. The change applies to the parent signature and the subsignature that you edit
C. The change applies only to subsignatures that are numbered sequentially after the subsignature that you edit
D. Other signatures are unaffected， the change applies only to the subsignature that you dit
【单选题】
Which type of mechanism does Cisco FirePOWER de ploy to protect ag detected moving across other networks？___
A. antivirus scanning
B. policy-based
C. reputation-based
D. signature-based
【单选题】
What action must you take on the ise to blacklist a wired device？___
A. Locate the switch through which the device is connected and push an a cl restricting all access by the device
B. Issue a CoA request for the de vice's mac address to each access switch in the network
C. Revoke the device's certificate so it is unable to authenticate to the network
D. Add the device's MAc address to a list of black listed devices
【单选题】
Which type of firewall can perform deep packet inspection？___
A. packet-filtering firewall
B. stateless firewall
C. application firewall
D. personal firewall
【单选题】
What is the main purpose of Control Plane Policing？___
A. to prevent exhaustion of route-proce ssor resources
B. to organize the egress packet queues
C. to define traffic classes
D. to maintain the policy map
【单选题】
Which attack can be prevented by OSPF authentication？___
A. smurf attack
B. IP spoofing attack
C. denial of service attack
D. buffer overflow attack
【单选题】
What is the best definition of hairpinning？___
A. ingress traffic that traverses the outbound interface on a device
B. traffic that enters one interface on a device and that exits through another interface
C. traffic that enters and exits a device through the same interface
D. traffic that tunnels through a device interface
【单选题】
Which SNMPv3 security level provides authentication using HMAC with MD5， but does not use encryption？___
A. authPriv
B. authNo Priv
C. noAuthNoPriv
D. NoauthPriv
【单选题】
You have implemented a dynamic blacklist， using security intelligence to block illicit network activity. However， the blacklist contains several approved connections that users must access for usiness pur poses. Which action can you take to retain the blacklist while allowing users to access the approve d sites？___
A. Create a whitelist and manually add the approved addresses.
B. Disable the dynamic blacklist and deny the specif ic address on a whitelist while permitting the others
C. Edit the dynamic blacklist to remove the approved addresses
D. Disable the dynamic blacklist and create a static blacklist in its place
【单选题】
When connecting to an external resource,you must change a source IP address to use one IP address from a range of 207.165.201.1 to 207.165.1.30. Which option do you implement ?___
A. dynamic source NAT that uses an IP ad dress as a mapped source
B. static destination NAT that uses a subnet as a real de stination
C. dynamic source NAT that uses a range as a mapped source
D. static destination NAT that uses a subnet as a real source
【单选题】
Refer to the exhibit. 【nat（ins，any）dynamic interface】Which ty pe of NaT is configured on a Cisco ASA？___
A. dynamic NAT
B. source identity NAT
C. dynamic PAT
D. identity twice NAT
【单选题】
Which mitigation technology for web-based threats prevents the removal of confidential data from the network？___
A. CTA
B. DCA
C. AMP
D. DLP
【单选题】
Refer to the exhibit. What is the effect of the given configuration？___
A. It establishes the preshared key for the switch
B. It establishes the preshared key for the firewall.
C. It establishes the preshared key for the Cisco ISE appliance
D. It establishes the preshared key for the router.
【多选题】
What are two major considerations when choosing between a SPAN and a TAP when plementing IPS？___
A. the type of analysis the iS will perform
B. the amount of bandwidth available
C. whether RX and TX signals will use separate ports
D. the way in which media errors will be handled
E. the way in which dropped packets will be handled
【多选题】
What are two direct-to-tower methods for redirecting web traffic to Cisco Cloud Web Security？___
A. third-party proxies
B. Cisco Catalyst platforms
C. Cisco NAC Agent
D. hosted PAC files
E. CiSco ISE
【多选题】
Which three descriptions of RADIUS are true？ ___
A. It uses TCP as its transport protocol.
B. Only the password is encrypted
C. It supports multiple transport protocols
D. It uses UDP as its transport protocol
E. It combines authentication and authorization
F. It separates authentication，authorization，and accounting
【多选题】
Which two configurations can prevent VLAN hopping attack from attackers at VLAN 10？___
A. using switchport trunk native vlan 10 command on trunk ports
B. enabling BPDU guard on all access ports
C. creating VLAN 99 and using switchport trunk native vlan 99 command on trunk ports
D. applying ACl between VLAN
E. using switchport mode access command on all host ports
F. using switchport nonegotiate command on dynamic desirable ports
【多选题】
What are two features of transparent firewall mode ___
A. It conceals the presence of the firewall from attackers
B. It allows some traffic that is blocked in routed mode
C. It enables the aSA to perform as a router.
D. It acts as a routed hop in the network.
E. It is configured by default
【多选题】
Which two models of A sa tend to be used in a data center？___
A. 5555X
B. 5585X
C. ASA service module
D. 5512X
E. 5540
F. 5520
【多选题】
Which two statements about hardware-based encrption are true？___
A. It is widely accessible
B. It is potentially easier to compromise than software-based encryption. It requires minimal configuration
C. It requires minimal configuration
D. It can be implemented without impacting performance
E. It is highly cost-effective
【多选题】
In which two modes can the Cisco We b Security appliance be de ployed？___
A. as a transparent proxy using the Secure Sockets Layer protocol
B. as a transparent proxy using the Web Cache Communication Protocol
C. explicit proxy mode
D. as a transparent proxy using the Hyper Text Transfer Protocol
E. explicit active mode
【单选题】
1．三相刀开关的图形符号与交流接触器的主触点符号是___。
A. 一样的
B. 可以互换
C. 有区别的
D. 没有区别
【单选题】
5．熔断器的作用是___。
A. 短路保护
B. 过载保护
C. 失压保护
D. 零压保护
【单选题】
6．热继电器的作用是___。
A. 短路保护
B. 过载保护
C. 失压保护
D. 零压保护
【单选题】
7．交流接触器的作用是可以___接通和断开负载。
【单选题】
8．三相异步电动机的启停控制线路由电源开关、熔断器、___、热继电器、按钮等组成。
A. 时间继电器
B. 速度继电器
C. 交流接触器
D. 漏电保护器
【单选题】
9．三相异步电动机的启停控制线路中需要有___、过载保护和失压保护功能。
A. 短路保护
B. 超速保护
C. 失磁保护
D. 零速保护
【单选题】
10维修电工以___、安装接线图和平面布置图最为重要。
A. 电气原理图
B. 电气设备图
C. 电气安装图
D. 电气组装图
推荐试题
【填空题】
35、 现场临时用电供电设施的停送电及现场临时用电安装和拆除，必须由 ___专业人员负责操作；
【填空题】
36、 生产装置、要害部位及罐区维修的临时用电，电气部门可根据批准合格的 ___ 办理临时用电作业许可证，临时用电作业许可证的办理要符合《临时用电安全管理制度》
【填空题】
37、 职业病危害因素主要包括以下几类：___。
【填空题】
38、在1~10KV的外电线路一侧施工时必须保持 ___ 米以上距离。
【填空题】
39、使用频繁的安全带，要经常作外观检查，发现异常应立即更换，使用期___
【填空题】
41、接触三酸___泄漏的人员，应佩戴___。
【填空题】
42、扑救电气火灾，首先应做的是___ 。
【填空题】
43、室内消火栓箱内一般应配置有___
【填空题】
44、灭火器上标注的灭火级别字母A、B、C表示___。
【填空题】
45、有毒物质可通过 ___ 途径进入人体内。
【填空题】
46、火灾是是指在时间或空间上失去控制的 ___所造成的灾害。
【填空题】
47、设备的设计、制造必须符合劳动安全卫生标准和有关技术规范的要求，各种设备的___装置必须齐全可靠，否则不得生产、销售、使用。
【填空题】
48、常用的防坠落护具有安全带、安全绳和___三类。
【填空题】
50、为防止有毒汽体或15、电焊机一次侧电源线不得长于___ 米，二次侧不得长于___米。
【填空题】
粉尘危害人体。应采取 ___ 和 ___ 措施。
【填空题】
51、劳动保护用品是用来保护劳动者在生产劳动中 ___ 与 ___ 方面的专用物品。
【填空题】
52、个人劳动防护用品是指劳动者在生产过程中为免遭或___事故伤害和职业危害的个人随身穿戴的用。
【填空题】
53、___主要用于扑救汽油、煤油、柴油和木材等引起的火灾
【填空题】
54、爆炸极限的范围越___，爆炸下限越___，爆炸危险性越大。通常的爆炸极限是在常温、常压的标准条件下测定出来的，它随温度、压力的变化而变化。
【填空题】
55、固体物质形成持续燃烧的最低温度被称为___，它是评价固体物质危险性的重要特征参数之一。
【单选题】
轨距是左右两股钢轨内侧顶面以下___处的距离。
A. 16mm
B. 15mm
C. 14mm
D. 13mm
【单选题】
我国城市轨道交通采用___为标准轨距。
A. 1425mm
B. 1430mm
C. 1435mm
D. 1440mm
【单选题】
作业验收时，轨距误差：规定宽不得超过___。
A. 4mm
B. 5mm
C. 6mm
D. 7mm
【单选题】
作业验收时，轨距误差：规定窄不得超过___。
A. 5mm
B. 4mm
C. 3mm
D. 2mm
【单选题】
在线路直线部分，轨距不应大于___。
A. 1438mm
B. 1439mm
C. 1440mm
D. 1441mm
【单选题】
在线路直线部分，轨距不应小于___。
A. 1431mm
B. 1432mm
C. 1433mm
D. 1434mm
【单选题】
轨距测量在日常检查中，通常每___检查一处。
A. 6.20m
B. 6.25m
C. 6.30m
D. 6.35m
【单选题】
轨距的大小是由机车车辆的轮对___确定的。
【单选题】
我国国家标准规定正直线轨距误差的允许范围为在___。
A. +6mm~-2mm
B. +8mm~-4mm
C. +10mm~-6mm
D. +12mm~-8mm
【单选题】
我国国家标准规定正直线轨距误差的允许范围保养标准为___。
A. +6mm~-2mm
B. +8mm~-4mm
C. +10mm~-6mm
D. +12mm~-8mm
【单选题】
我国国家标准规定正直线1m范围内轨距不得有___以上的误差。
A. 4mm
B. 3mm
C. 2mm
D. 1mm
【单选题】
在日常检查时，水平也用道尺进行检查，通常每___检查一处。
A. 6.25m
B. 6.30m
C. 6.35m
D. 6.40m
【单选题】
《铁路技术管理规程》中规定：水平的允许误差，在维修线路的正线，到发线上，不得大于___。
A. 3mm
B. 4mm
C. 5mm
D. 6mm
【单选题】
《铁路技术管理规程》中规定：水平的允许误差，在维修线路的正线，到发线上，不得大于4mm，其他线不得大于___为基准。
A. 6mm
B. 5mm
C. 4mm
D. 3mm
【单选题】
水平的变化率1m距离内，变化不得超过___。
A. 2mm
B. 1mm
C. 10mm
D. 20mm
