刷题
导入试题
【单选题】
线路中心线之间的垂直距离称为线间距,地面线的线间距一般为___。
A. 4.5~5m
B. 5~5.5m
C. 5.5~6m
D. 6~6.5m
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
A
解析
暂无解析
相关试题
【单选题】
混凝土枕碎石道床顶面应与轨枕中部顶面平齐,木枕碎石道床顶面应低于木枕顶面___。
A. 10mm
B. 20mm
C. 30mm
D. 40mm
【单选题】
排水沟的纵向坡度应与线路坡度一致,线路平坡地段,排水沟纵向坡度不宜小于___。
A. 0.02
B. 0.03
C. 0.04
D. 0.05
【单选题】
桥梁上钢轨扣件失效率不得大于___,且不得有隔一或连二失效扣件。
A. 0.1
B. 0.15
C. 0.2
D. 0.25
【单选题】
不是钢轨的主要功用的为___
A. 支持引导机车车辆的车轮
B. 使列车按正确的方向运行
C. 固定轨枕形成框架结构
D. 将来自车辆的压力传送给轨枕
【单选题】
25m,60kg/m钢轨普通线路,10.9级螺栓扭力矩应达到___。
A. 600N•m
B. 700N•m
C. 800N•m
D. 900N•m
【单选题】
不同类型的钢轨互相联结时,应使用___。
A. 鱼尾型夹板
B. 平直夹板
C. 双头式夹板
D. 异型夹板
【单选题】
下列设备零件中,___尺寸对最大轨缝限制值(即构造轨缝)没有影响。
A. 钢轨
B. 接头夹板
C. 接头螺栓
D. 轨枕扣件
【单选题】
线路上的伤损钢轨应用白铅油做好标记,连续轻伤有发展的标记是___。
A. ▕←△→▏
B. ▕←△△→▏
C. ↑△
D. ↑△△
【单选题】
线路上的伤损钢轨应用白铅油做好标记,___的标记是↑△△△。
A. 连续重伤
B. 局部重伤
C. 连续轻伤
D. 局部轻伤
【单选题】
曲线正矢应用20m弦在钢轨踏面下___测量
A. 14mm处
B. 14mm范围内
C. 16mm处
D. 16mm范围内
【单选题】
个别更换夹板后放行列车___。
A. 不限速
B. 限速5km/h
C. 限速25km/h
D. 限速45km/h
【单选题】
曲线实设最大超高,在单线上不得大于___。
A. 125mm
B. 135mm
C. 145mm
D. 150mm
【单选题】
道岔护轨轮缘槽标准宽度为42mm,容许误差为___。
A. ﹢3,-1mm
B. ﹢3,-2mm
C. ±2mm
D. ±3mm
【单选题】
为平衡列车在曲线运行时产生的___,需要在曲线段将外轨抬高,使车体内倾。
A. 向心力
B. 离心力
C. 向心速度
D. 离心速度
【单选题】
不会引起线路爬行的为___。
A. 钢轨在车轮作用下的波浪形弯曲
B. 钢轨温度变化
C. 列车制动
D. 钢轨轨距误差超限
【单选题】
线路轨距超限或变化率不合要求,以及拨道后有个别碎弯,应进行___作业。
A. 起道
B. 改道
C. 拨道
D. 矫直钢轨
【单选题】
___是根据线路变化情况,在全年度和线路全长范围内进行的有计划、有重点的养护,以保持线路质量经常处于均匀状态。
A. 综合维修
B. 经常保养
C. 临时补修
D. 线路中修
【单选题】
下列混凝土枕伤损中,___为轨枕失效。
A. 纵向水平裂缝基本贯通(缝宽大于0.5mm)
B. 承轨槽压溃,深度超过2mm
C. 挡肩破损,接近失去支撑能力(破损长度超过挡肩长度的1/2)
D. 严重的网状龟裂和掉块。
【单选题】
使用新枕木要钻道钉孔,孔深有垫板时为___。
A. 100mm
B. 110mm
C. 120mm
D. 130mm
【单选题】
轨向偏差是用___测量的最大矢度值。
A. 1m尺
B. 5m弦
C. 10m弦
D. 20m弦
【单选题】
线路爬行量超过___时应对轨缝进行调整。
A. 15mm
B. 18mm
C. 20mm
D. 25mm
【单选题】
如列车用5s时间运行了100m,则列车速度为___。
A. 72km/h
B. 75km/h
C. 70km/h
D. 68km/h
【单选题】
线路曲线外轨实设最大超高度,在双线上不得大于___。
A. 125mm
B. 135mm
C. 145mm
D. 150mm
【单选题】
轨距尺由计量部门负责检定,周期为___。
A. 2个月
B. 3个月
C. 4个月
D. 5个月
【单选题】
曲线轨距加宽应在整个缓和曲线内递减,递减率一般不大于___。
A. 1‰
B. 1.5‰
C. 2‰
D. 3‰
【单选题】
曲线地段,未被平衡欠超高,一般应不大于___。
A. 50mm
B. 60mm
C. 75mm
D. 90mm
【单选题】
碎石道床地段的无缝线路在进行维修作业的地区应按需要备足___。
A. 钢轨
B. 枕木
C. 道砟
D. 扣件
【单选题】
无缝线路在进行维修作业的地段,起道前应先___。
A. 拨正线路方向
B. 方正轨枕
C. 补充道砟
D. 矫直钢轨
【单选题】
无缝线路依处理钢轨___方式不同,分温度应力式和放散温度应力式两种。
A. 外部温度应力
B. 外部温度力
C. 内部温度力
D. 内部温度力
【单选题】
曲线钢轨磨耗是随着___。
A. 曲线长度增大而增大
B. 曲线的半径减小而增大
C. 曲线半径的增大而增大
D. 曲线的转角的增大而增大
【单选题】
不影响曲线钢轨磨耗的因素为___。
A. 线路坡度的大小
B. 机车牵引类型
C. 曲线半径
D. 曲线的长度
【单选题】
无缝线路在锁定轨温以下时,钢轨内部产生___。
A. 拉应力
B. 压应力
C. 剪压力
D. 拉应力与压应力
【单选题】
无缝线路钢轨温度的升高或下降的温度变化值影响钢轨内部的___。
A. 温度力
B. 温度应力
C. 剪应力
D. 剪切应力
【单选题】
接头阻力由钢轨与接头夹板之间的摩擦阻力和螺栓___提供。
A. 抗拉力
B. 抗剪力
C. 抗弯力
D. 抗压力
【单选题】
下列不属于无缝线路特点的为___。
A. 钢轨的重量大
B. 减少了钢轨接头
C. 钢轨内部产生温度力
D. 固定区钢轨不能自由伸缩
【单选题】
温度应力式无缝线路的温度应力是靠___来解决的。
A. 自动放散
B. 定期放散
C. 轨道的框架
D. 轨道框架和道床阻力
【单选题】
曲线轨距加宽递减如无缓和曲线,则在___。
A. 直线上递减,递减率一般不大于1‰
B. 直线和圆曲线各递减一半,递减率不大于1‰
C. 圆曲线上递减,递减率一般不大于1‰
D. 直线上递减,递减率一般不大于2‰
【单选题】
当350m>R≥300m时,轨距加宽___。
A. 0mm
B. 5mm
C. 10mm
D. 15mm
【单选题】
半径为___及以下的曲线和道岔导曲线,亦可安装轨距杆和轨撑两种加强设备。
A. 150m
B. 300m
C. 350m
D. 500m
【单选题】
库内线列车运行速度控制在___以下。
A. 3Km/h
B. 4Km/h
C. 5Km/h
D. 6Km/h
推荐试题
【单选题】
An administrator has a virtual machine that requires four times the compute resources than other virtual machines on the same ESXi 6.x host. How should the administrator configure the virtual machine settings, in order to be prepared for any resource contention? ___
A. Set the shares of the priority virtual machine to High and the rest to Low.
B. Set the shares of the priority virtual machine to High.
C. Set the shares of the priority virtual machine to High and the rest to Normal.
D. Set the shares of the priority virtual machine to Normal and the rest to Low.
【单选题】
Which type of Adapter does not require vmkernel networking? ___
A. Independent Hardware iSCSI Adapter
B. Dependent Hardware iSCSI Adapter
C. Software iSCSI Adapter
D. Software FCoE Adapter
【单选题】
During the installation of ESXi 6.0, the following error message is reported: Hardware Virtualization is not a feature of the CPU, or is not enabled in the BIOS. Which condition would generate this message? ___
A. LAHF/SAHF is not enabled in the BIOS.
B. NX/XD is not enabled in the BIOS.
C. SSE3 is not enabled in the BIOS.
D. Hyperthreading is not enabled in the BIOS.
【单选题】
An administrator is unable to login to vCenter Server when using the vSphere web client. The administrator successfully accessed vCenter Server using the client earlier the same day. What is the most appropriate first step the administrator should take to resolve this issue? ___
A. Verify the web browser being used has Adobe Flash plugin version 11.5 or later
B. Verify the vCenter Single Sign-On service is running on the vCenter Server
C. Verify the vSphere Web Server service is running on the vCenter Server
D. Verify the administrator has permissions configured in vCenter Server
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets two conditions: <high virtual CPU> <high active memory consumption> The alarm is malfunctioning and triggering when either condition is met instead of both. What can be done to correct the issue? ___
A. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
What must be enabled to ensure that VM Component Protection (VMCP) works in a High Availability cluster? ___
A. VMware Tools Virtual Machine Communication Interface (VMCI)
B. Fault Tolerance
C. Atomic Test and Set (ATS)
D. All Paths Down (APD) Timeout
【单选题】
An administrator wants to add a web server to an existing multi-tier application consisting of three virtual machines: <A web server> <A database server An application server> The web server should be added to the application when the primary web server reaches: <70% vCPU utilization> <55% active memory> Which option will achieve this result? ___
A. Create a virtual machine alarm with an action to run a script that starts a new instance of the web server.
B. Create a host cpu and memory alarm with an action to run a script that starts a new instance of the webserver.
C. Configure HA application monitoring for the web server and set it to trigger deployment of a new instance of the web server.
D. Configure Fault Tolerance on the virtual machine and leave the secondary machine disabled until needed.
【单选题】
An administrator has an application that requires connection directly to PCI devices through a virtual machine. What is a limitation of this configuration? ___
A. Devices must be reserved for PCI passthrough on at least one host on which the virtual machine will run.
B. Snapshots are not supported with DirectPath I/O passthrough devices.
C. A maximum of 18 PCI vSphere
D. irectPath devices can be added to a virtual machine.
【单选题】
The vSphere administrator is configuring directory services for an ESXi host: What should the vSphere administrator do to configure the host to use CAM services? ___
A. Check the Use vSphere Authentication Proxy checkbox.
B. Set Select Directory Service Type to CAM services.
C. Specify CAM$ for the
D. omain.
【单选题】
Which statement is true regarding the licensing of vCenter Server? ___
A. The license for vCenter Server must be provided at the time of installation.
B. Changing the license assigned to vCenter Server requires a restart of the vCenter Server service.
C. Virtual machines can still be powered on if the vCenter Server license expires.
D. Licensing for a single vCenter Server installation is determined by the number of managed virtual machines.
【单选题】
When configuring vSphere Replication for a virtual machine, what is the lowest Recovery Point Objective (RPO) that can be selected? ___
A. 1 min
B. 5 min
C. 10 min
D. 15min
【单选题】
A developer needs to create a multi-tier development stack for a home lab. Which vSphere product will support the architecture required for the least software cost? ___
A. vSphere Hypervisor
B. vSphere Essentials
C. VMware Player
D. VMware Workstation
【单选题】
An administrator is installing Windows into a virtual machine. The DVD has been mounted on the Host and configured for the virtual machine as shown in the Exhibit. Based on the exhibit, when the virtual machine is booted, why would it attempt to search for a PXE server? ___
A. The CD/DVD device is not connected.
B. The ISO is in the incorrect storage location.
C. The OS minimum requirements have not been met.
D. The CD/DVD device is not set to Client Device.
【单选题】
What component must be installed prior to deploying a vCenter Server in vSphere 6.x? ___
A. vCenter Identity Services
B. Platform Services Controller
C. vCenter Single Sign-On
D. Client Integration Plug-In
【单选题】
What is a valid plug-in status for a plug-in that has been added to a vSphere client? ___
A. Disabled
B. Unknown
C. Stopped
D. Installed
【单选题】
Users of an application are reporting performance issues. The following performance values are observed in the vSphere Web Client: <Host CPU utilization is 90%> <Virtual Machine memory utilization is consistently greater than 90% CPU Ready values are higher than 20%> What could be the cause of the application performance issue? ___
A. The host is lacking the CPU resources required to meet the demand.
B. The host is lacking the memory resources required to meet the demand.
C. The virtual machine is lacking the CPU resources required to meet the demand.
D. The virtual machine is lacking the memory resources required to meet the demand.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is re-provisioning an ESXi host and moving it to another datacenter. Which DCUI option should the administrator use to revert the system configuration to the default settings? ___
A. Reset System Configuration
B. Rebuild Default System Configuration
C. Revert System Configuration
D. Renew Default System Configuration
【单选题】
An administrator has just completed installing an ESXi 6.x host, but doesn't know what address has been configured. Where is the ESXi host IP address configured? ___
A. RVC console
B. Direct Console User Interface
C. vSphere Web Client
D. vSphere Client
【单选题】
When is it possible to place a VMFS5 datastore in maintenance mode? ___
A. When it is a member of a Storage DRS cluster
B. When it is a member of Virtual SAN cluster
C. When it is a member of a multi-extent datastore
D. When it is a member of a Virtual Volume
【单选题】
Immediately after installing ESXi, an administrator observes that the Configure Lockdown Mode option is grayed out in the Direct Console User Interface (DCUI). What is the most likely explanation? ___
A. The host has not yet been added to a vCenter Server.
B. The BIOS on the host does not have NX/XD enabled.
C. The ESXi host is running in evaluation mode.
D. The host requires a reboot before this feature is available.
【单选题】
Immediately after installing ESXi, an administrator observes that the Configure Lockdown Mode option is grayed out in the Direct Console User Interface (DCUI). What is the most likely explanation? ___
A. The host has not yet been added to a vCenter Server.
B. The BIOS on the host does not have NX/XD enabled.
C. The ESXi host is running in evaluation mode.
D. The host requires a reboot before this feature is available.
【单选题】
Which Single Sign-On deployment mode should an administrator use for two 6.x vCenter Servers configured with linked mode? ___
A. Basic Single Sign-On with vCenter Server Heartbeat
B. Multisite Single Sign-On
C. Basic Single Sign-On
D. Single Sign-On with Linked Mode
【单选题】
What is required when changing a virtual machine name using the vSphere Web Client? ___
A. Verify connectivity to the ESXi host where the virtual machine is running and its inventory list is accessible.
B. Verify in which datastore the virtual machine resides and that you have access and its inventory list is accessible.
C. Verify that virtual machine files are stored in the same datastore and can be accessed in the datastore browser list.
D. Verify the virtual machine is not running in Fault Tolerant mode and that it is not in a Distributed Resource Scheduler cluster.
【单选题】
An administrator deploys vRealize Operations into a vSphere 6.x environment. After the deployment, the administrator notices that badges are not appearing. What is a likely cause of this behavior? ___
A. Badges do not appear until you register vRealize Operations with vCenter Server.
B. Badges do not appear until you register a vCenter Server in vRealize Operations.
C. The vRealize Operations appliance needs to be redeployed.
D. The vCenter Server appliance needs to be redeployed.
【单选题】
How are ports scaled on vSphere Standard Switches (vSS)? ___
A. Ports on a vSS can be dynamically scaled up and down.
B. Ports on a vSS can only be statically scaled up or down.
C. Ports on a vSS can only be dynamically scaled down.
D. Ports on a vSS can only be dynamically scaled up.
【单选题】
A High Availability (HA) cluster is configured to respond to a given number of host failures. The cluster contains virtual machines configured with these settings: VM1 has a 1GHz CPU reservation and no Memory reservation VM2 has a 2GHz CPU reservation and no Memory reservation VM3 has no CPU reservation and no Memory reservation . Given this information, what is the correct slot size for the cluster? ___
A. The CPU Reservation should be set to 32MHz and the memory reservation should be set to 32MB plus memory overhead.
B. The CPU reservation should be set to 1 GHz and the memory reservation should be set to 0MB plus memory overhead.
C. The CPU reservation should be set to 2 GHz, and the memory reservation should be set to 0MB plus the virtual machine memory overhead.
D. The CPU reservation should be set to 2 GHz, and the memory reservation should be set to 32MB, plus the virtual machine memory overhead.
【单选题】
An administrator is planning a vSphere infrastructure with the following specific networking requirements: <The ability to shape inbound (RX) traffic> <Support for Private VLANs (PVLANs)> <Support for LLDP (Link Layer Discovery Protocol)>. What is the minimum vSphere Edition that will support these requirements? ___
A. vSphere Essentials Plus
B. vSphere Standard
C. vSphere Enterprise
D. vSphere
E. nterprise Plus
【单选题】
When you add an ESXi 6.x host to a new Cluster, which vSphere object owns the CPU and Memory resources of the hosts? ___
A. vCenter Server
B. Datacenter
C. Cluster
D. Host
【单选题】
A user is trying to retrieve objects from a SharePoint server and finds the request is taking an excessive amount of time. An administrator tries to isolate the issue and notes the following: Application performance is poor when compared to virtual machines on other hosts. Performance improves when the virtual machine is moved to another host. The virtual machine encounters higher than expected CPU %Ready times. What conclusion can be reached regarding the performance issues for this virtual machine? ___
A. Host Power Management is directly impacting virtual machine performance.
B. The virtual machine has a large number of snapshots.
C. The Path Selection Policy for the storage device is set differently on the affected host.
D. Network I/O control is configured for the portgroup.
【单选题】
A virtual machine template is accidently removed from the vCenter Server Inventory. Which method would be used to recover the template back into the environment?___
A. Use the datastore browser to locate the template, then right click and add the .vmtx file to inventory.
B. Use the datastore browser to locate the template, then right click and add the .vmx file to inventory.
C. Using the Managed Object Browser and adding the template from the ManagedObjectReference:GuestFileManager object.
D. Using the Managed Object Browser and adding the template from the ManagedObjectReference:VirtualDiskManager object.
【单选题】
A vSphere administrator needs to backup a virtual machine that has a Microsoft SQL Server Database installed. Which solution allows for an application quiesce to occur during backup?___
A. VMware vCenter Converter
B. VMware vCenter Site Recovery Manager
C. VMware vSphere Replication
D. VMware vSphere Data Protection Advanced
【单选题】
An administrator is migrating a virtual machine from a Test cluster to a Production cluster. The two environments do not have any shared storage. What is the easiest way to accomplish this task? ___
A. Perform a Storage vMotion.
B. Perform a regular vMotion.
C. Perform a Virtual to Virtual migration.
D. Perform a backup and restore using VMware Data Protection.
【单选题】
An administrator must determine an appropriate backup solution, given these conditions: 50 of the virtual machines are in a resource pool named Finance. 50 of the virtual machines are in a resource pool named QA. Which solution allows an administrator the ability to backup 100 virtual machines? ___
A. Use Snapshot Manager on the vCenter Server to backup the virtual machines.
B. Use the VMware Consolidated Backup (vcb) tool on the ESXi Host to backup the virtual machines.
C. Use the VMware Data Recovery (VDR) Appliance on the vCenter Server to backup the virtual machines.
D. Use the VMware Data Protection (VDP) Appliance on one of the
E. SXi Hosts to backup the virtual machines.
【单选题】
What is a benefit of using Enhanced vMotion Compatibility for an environment? ___
A. EVC masks CPU features to allow compatibility between hosts that are dissimilar.
B. EVC allows for cross platform vMotion to occur.
C. EVC enables Long
D. istance vMotion.
【单选题】
How many Link Aggregation Groups (LAGs) can be configured on a vSphere 6.x Distributed Switch? ___
A. 64
B. 96
C. 128
D. 256
【单选题】
How many Link Aggregation Groups (LAGs) can be configured on a vSphere 6.x Distributed Switch? ___
A. 64
B. 96
C. 128
D. 256
【单选题】
An administrator needs to verify that vMotion operations can be performed in a vSphere data center.What round trip time (RTT) latency is the maximum value that will allow vMotion operations to succeed? ___
A. 50ms RTT
B. 100ms RTT
C. 150ms RTT
D. 200ms RTT
【单选题】
A storage administrator has reported that full utilization of all bandwidth from an ESXi 6.x host is not being seen. In troubleshooting the issue, the Adapter details are shown in the Exhibit. Based on the exhibit, what is cause of the issue? ___
A. The array is not setup to use the correct multipathing policy.
B. There are no virtual machines on the ESXi host.
C. Not all links are used because a path is disabled.
D. Another path needs to be configured.
【单选题】
An administrator is migrating a powered-on virtual machine, as shown in the exhibit. Which option should be selected to perform a Storage vMotion of the VM? ___
A. Change storage only
B. Change VM compute resource only
C. Change both compute resource and storage, changing the compute resource first.
D. Change both compute resource and storage, changing the storage resource first.
欢迎使用我爱刷题
×
微信搜索我爱刷题小程序
温馨提示
×
请在电脑上登陆“www.woaishuati.com”使用